* [ECOS] Debugging and testing
[not found] <GTOF4G$IeKhhJeVXsOV8tH3aGjFJW4PyuHnEdyHLWW9ESg1X8_rNlx9fUGT@libero.it>
@ 2002-03-30 13:50 ` Krypton
0 siblings, 0 replies; only message in thread
From: Krypton @ 2002-03-30 13:50 UTC (permalink / raw)
To: ecos-discuss
With the help of two very kind persons (Davide and Simun)
I'm ath last able to build RedBoot on my host Linux
and boot from a FD on the target x86.
Now I'd like to see something moving.....
I should probably use gdb/Insight to load, debug and run the tests.
I already have gdb 5.0.17mdk configured as "i386-mandrake-linux" on my host.
Can I use this one or do I need to rebuild from the sources as explained in
ecos manual ?
If I can use this one, why I'm unable to debug.
I followed the instructions:
> 4) Boot the target with the redboot floppy.
> 5) Start gdb/insight on the host.
> 6) Setup gdb/insight for a Remote/Serial target at 38400 baud. You can
> do that both using the Insight console commands and using the GUI.
> - set remotebaud 38400
> - target remote /dev/ttyS0
>
> At this point I have an answer from the target pc "Ignoring packet
error..."
Please help
TIA
-----
krypton8-AT-inwind-DOT-it
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2002-03-30 14:12 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <GTOF4G$IeKhhJeVXsOV8tH3aGjFJW4PyuHnEdyHLWW9ESg1X8_rNlx9fUGT@libero.it>
2002-03-30 13:50 ` [ECOS] Debugging and testing Krypton
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).