* [ECOS] How to start tests with Cygwin
@ 2006-06-21 12:16 Igor Ivanov
2006-06-21 12:48 ` Laurie Gellatly
0 siblings, 1 reply; 3+ messages in thread
From: Igor Ivanov @ 2006-06-21 12:16 UTC (permalink / raw)
To: ecos-discuss
Hello!
There is a port for Olimex LPC-E2294.
Redboot it is loaded in flash and allows to load an example through
com-port.
Operational system Windows XP, Cygwin.
How to start tests?
How to connection through Insight-5.3?
At attempt of connection with parameters Remote/Serial, 115200, com1 I
receive message "Inappropriate ioctl for device".
At attempt of connection with console of Insight receive:
******
(gdb)set remotebaud 115200
(gdb)set debug remote 1
(gdb) target remote /dev/com1
Remote debugging using /dev/com1
Sending packet: $Hc-1#09...putpkt: Junk: Ethernet ethO: HOC address
08:88:12:34:56:78
IP: 192.168.10.198/255.255.255.0, Gateway: 0.0.0.0
Default seruer: 0.0.0.0
RedBoot(tm) bootstrap and debug enuironment [ROM]
Non
Nak
Sending packet: $Hc-1#09__putpkt: Junk: certified release, version 1.1
Nak
Sending packet: $Hc-1#09...putpkt: Junk: built 17:53:14, Jun 20 2006
Platform: Philips LPC2XXX/01imex LPC
Nak
Sending packet: $Hc-1#9...putpkt: Junk: E2294 (ARM7TDMI
Nak
Timed out.
Timed out.
Timed out.
Ignoring packet error, continuing__
Sending packet: $qC#b4...Nak
Sending packet: $qC#b4...putpkt: Junk: Ethernet ethO: HOC address
08:88:12:34:56:78
IP: 192.168.10.198/255.255.255.0, Gateway: 0.0.0.0
Default seruer: 0.0.0.0
RedBoot(tm) bootstrap and debug enuironment [ROM]
Non
Nak
Sending packet: $qC#b4__putpkt: Junk: certified release, uersion 1.1
Nak
Sending packet: $qC#b4...putpkt: Junk: built 17:53:14, Jun 20 2006
Platform: Philips LPC2XXX/01imex LPC
Nak
Timed out.
Timed out.
Timed out.
Ignoring packet error, continuing__
Sending packet: $q0ffsets#4b...Nak
Sending packet: $q0ffsets#4b...putpkt: Junk: Ethernet ethO: HOC address
08:88:12:34:56:78
IP: 192.168.10.198/255.255.255.0, Gateway: 0.0.0.0
Default seruer: 0.0.0.0
RedBoot(tm) bootstrap and debug enuironment [ROM]
Non
Nak
Sending packet: $q0ffsets#4b__putpkt: Junk: certified release, uersion 1.1
Nak
Sending packet: $q0ffsets#4b...putpkt: Junk: built 17:53:14, Jun 20 2006
Platform: Philips LPC2XXX/01imex LPC
Nak
Timed out.
Timed out.
Timed out.
Ignoring packet error, continuing__
Error: Couldn't establish connection to remote target
Malformed response to offset query, timeout
*********
Thanks ahead,
Igor.
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: [ECOS] How to start tests with Cygwin
2006-06-21 12:16 [ECOS] How to start tests with Cygwin Igor Ivanov
@ 2006-06-21 12:48 ` Laurie Gellatly
0 siblings, 0 replies; 3+ messages in thread
From: Laurie Gellatly @ 2006-06-21 12:48 UTC (permalink / raw)
To: ecos-discuss
I tried using 115K but it did not work.
Suggest you slow the comminications down from 115K to say 38400.
...Laurie:{)
-----Original Message-----
From: ecos-discuss-owner@ecos.sourceware.org
[mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of Igor Ivanov
Sent: Wednesday, 21 June 2006 10:18 PM
To: ecos-discuss@sourceware.org
Subject: [ECOS] How to start tests with Cygwin
Hello!
There is a port for Olimex LPC-E2294.
Redboot it is loaded in flash and allows to load an example through
com-port.
Operational system Windows XP, Cygwin.
How to start tests?
How to connection through Insight-5.3?
At attempt of connection with parameters Remote/Serial, 115200, com1 I
receive message "Inappropriate ioctl for device".
At attempt of connection with console of Insight receive:
******
(gdb)set remotebaud 115200
(gdb)set debug remote 1
(gdb) target remote /dev/com1
Remote debugging using /dev/com1
Sending packet: $Hc-1#09...putpkt: Junk: Ethernet ethO: HOC address
08:88:12:34:56:78
IP: 192.168.10.198/255.255.255.0, Gateway: 0.0.0.0
Default seruer: 0.0.0.0
RedBoot(tm) bootstrap and debug enuironment [ROM]
Non
Nak
Sending packet: $Hc-1#09__putpkt: Junk: certified release, version 1.1
Nak Sending packet: $Hc-1#09...putpkt: Junk: built 17:53:14, Jun 20 2006
Platform: Philips LPC2XXX/01imex LPC
Nak
Sending packet: $Hc-1#9...putpkt: Junk: E2294 (ARM7TDMI
Nak
Timed out.
Timed out.
Timed out.
Ignoring packet error, continuing__
Sending packet: $qC#b4...Nak
Sending packet: $qC#b4...putpkt: Junk: Ethernet ethO: HOC address
08:88:12:34:56:78
IP: 192.168.10.198/255.255.255.0, Gateway: 0.0.0.0
Default seruer: 0.0.0.0
RedBoot(tm) bootstrap and debug enuironment [ROM]
Non
Nak
Sending packet: $qC#b4__putpkt: Junk: certified release, uersion 1.1 Nak
Sending packet: $qC#b4...putpkt: Junk: built 17:53:14, Jun 20 2006
Platform: Philips LPC2XXX/01imex LPC
Nak
Timed out.
Timed out.
Timed out.
Ignoring packet error, continuing__
Sending packet: $q0ffsets#4b...Nak
Sending packet: $q0ffsets#4b...putpkt: Junk: Ethernet ethO: HOC address
08:88:12:34:56:78
IP: 192.168.10.198/255.255.255.0, Gateway: 0.0.0.0
Default seruer: 0.0.0.0
RedBoot(tm) bootstrap and debug enuironment [ROM]
Non
Nak
Sending packet: $q0ffsets#4b__putpkt: Junk: certified release, uersion
1.1 Nak Sending packet: $q0ffsets#4b...putpkt: Junk: built 17:53:14, Jun
20 2006
Platform: Philips LPC2XXX/01imex LPC
Nak
Timed out.
Timed out.
Timed out.
Ignoring packet error, continuing__
Error: Couldn't establish connection to remote target
Malformed response to offset query, timeout
*********
Thanks ahead,
Igor.
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: [ECOS] How to start tests with Cygwin
@ 2006-06-21 13:04 Marcin Chrusciel
0 siblings, 0 replies; 3+ messages in thread
From: Marcin Chrusciel @ 2006-06-21 13:04 UTC (permalink / raw)
To: ecos-discuss
Igor,
Where can I find this port for lpc2294????
Marcin
-----Original Message-----
From: ecos-discuss-owner@ecos.sourceware.org
[mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of Igor Ivanov
Sent: 21 June 2006 14:18
To: ecos-discuss@sourceware.org
Subject: [ECOS] How to start tests with Cygwin
Hello!
There is a port for Olimex LPC-E2294.
Redboot it is loaded in flash and allows to load an example through
com-port.
Operational system Windows XP, Cygwin.
How to start tests?
How to connection through Insight-5.3?
At attempt of connection with parameters Remote/Serial, 115200, com1 I
receive message "Inappropriate ioctl for device".
At attempt of connection with console of Insight receive:
******
(gdb)set remotebaud 115200
(gdb)set debug remote 1
(gdb) target remote /dev/com1
Remote debugging using /dev/com1
Sending packet: $Hc-1#09...putpkt: Junk: Ethernet ethO: HOC address
08:88:12:34:56:78
IP: 192.168.10.198/255.255.255.0, Gateway: 0.0.0.0
Default seruer: 0.0.0.0
RedBoot(tm) bootstrap and debug enuironment [ROM]
Non
Nak
Sending packet: $Hc-1#09__putpkt: Junk: certified release, version 1.1
Nak
Sending packet: $Hc-1#09...putpkt: Junk: built 17:53:14, Jun 20 2006
Platform: Philips LPC2XXX/01imex LPC
Nak
Sending packet: $Hc-1#9...putpkt: Junk: E2294 (ARM7TDMI
Nak
Timed out.
Timed out.
Timed out.
Ignoring packet error, continuing__
Sending packet: $qC#b4...Nak
Sending packet: $qC#b4...putpkt: Junk: Ethernet ethO: HOC address
08:88:12:34:56:78
IP: 192.168.10.198/255.255.255.0, Gateway: 0.0.0.0
Default seruer: 0.0.0.0
RedBoot(tm) bootstrap and debug enuironment [ROM]
Non
Nak
Sending packet: $qC#b4__putpkt: Junk: certified release, uersion 1.1
Nak
Sending packet: $qC#b4...putpkt: Junk: built 17:53:14, Jun 20 2006
Platform: Philips LPC2XXX/01imex LPC
Nak
Timed out.
Timed out.
Timed out.
Ignoring packet error, continuing__
Sending packet: $q0ffsets#4b...Nak
Sending packet: $q0ffsets#4b...putpkt: Junk: Ethernet ethO: HOC address
08:88:12:34:56:78
IP: 192.168.10.198/255.255.255.0, Gateway: 0.0.0.0
Default seruer: 0.0.0.0
RedBoot(tm) bootstrap and debug enuironment [ROM]
Non
Nak
Sending packet: $q0ffsets#4b__putpkt: Junk: certified release, uersion
1.1
Nak
Sending packet: $q0ffsets#4b...putpkt: Junk: built 17:53:14, Jun 20 2006
Platform: Philips LPC2XXX/01imex LPC
Nak
Timed out.
Timed out.
Timed out.
Ignoring packet error, continuing__
Error: Couldn't establish connection to remote target
Malformed response to offset query, timeout
*********
Thanks ahead,
Igor.
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2006-06-21 13:04 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-06-21 12:16 [ECOS] How to start tests with Cygwin Igor Ivanov
2006-06-21 12:48 ` Laurie Gellatly
2006-06-21 13:04 Marcin Chrusciel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).