* [ECOS] how to assign an IP address ?
@ 2001-08-17 6:37 Amit Bhor
2001-08-17 6:42 ` Andrew Lunn
0 siblings, 1 reply; 3+ messages in thread
From: Amit Bhor @ 2001-08-17 6:37 UTC (permalink / raw)
To: ecos-discuss
hello everyone ,
i compiled the ecos code with networking support with the test_ping.c program ... but how do i assign a IP address to the loopback interface ? ..I can see some bootp code but can i assign an IP address statically ? ..if yes...how ? I am running the ecos 1.3.1 with the stable tcp/ip stack (not the current cvs code)...
thanx in advance ....
Amit
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [ECOS] how to assign an IP address ?
2001-08-17 6:37 [ECOS] how to assign an IP address ? Amit Bhor
@ 2001-08-17 6:42 ` Andrew Lunn
2001-08-17 6:53 ` Gary Thomas
0 siblings, 1 reply; 3+ messages in thread
From: Andrew Lunn @ 2001-08-17 6:42 UTC (permalink / raw)
To: Amit Bhor; +Cc: ecos-discuss
On Fri, Aug 17, 2001 at 01:37:44PM +0000, Amit Bhor wrote:
> hello everyone ,
>
> i compiled the ecos code with networking support with the test_ping.c program ... but how do i assign a IP address to the loopback interface ? ..I can see some bootp code but can i assign an IP address statically ? ..if yes...how ? I am running the ecos 1.3.1 with the stable tcp/ip stack (not the current cvs code)...
First off, i suggest you use the anon cvs version. There have been
lots of bug fixes to the stack which are only in CVS.
The function init_all_network_interfaces() will assigned the IP
address 127.0.0.1 to the loopback device. You don't need to do
anything so long as you call this function.
Andrw
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [ECOS] how to assign an IP address ?
2001-08-17 6:42 ` Andrew Lunn
@ 2001-08-17 6:53 ` Gary Thomas
0 siblings, 0 replies; 3+ messages in thread
From: Gary Thomas @ 2001-08-17 6:53 UTC (permalink / raw)
To: Andrew Lunn; +Cc: ecos-discuss, Amit Bhor
On 17-Aug-2001 Andrew Lunn wrote:
> On Fri, Aug 17, 2001 at 01:37:44PM +0000, Amit Bhor wrote:
>> hello everyone ,
>>
>> i compiled the ecos code with networking support with the test_ping.c program ... but how do i
>> assign a IP address to the loopback interface ? ..I can see some bootp code but can i assign an
>> IP address statically ? ..if yes...how ? I am running the ecos 1.3.1 with the stable tcp/ip
> stack (not the current cvs code)...
>
> First off, i suggest you use the anon cvs version. There have been
> lots of bug fixes to the stack which are only in CVS.
>
> The function init_all_network_interfaces() will assigned the IP
> address 127.0.0.1 to the loopback device. You don't need to do
> anything so long as you call this function.
>
Additionally, I'm pretty sure that the loopback interface does not
even function in the older 1.3.1 codebase.
Use the CVS.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2001-08-17 6:53 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-08-17 6:37 [ECOS] how to assign an IP address ? Amit Bhor
2001-08-17 6:42 ` Andrew Lunn
2001-08-17 6:53 ` Gary Thomas
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).