* [ECOS] problem in configuring and building ecos for linux synthetic target
@ 2001-11-14 3:57 john kingsly
2001-11-14 5:17 ` Andrew Lunn
0 siblings, 1 reply; 3+ messages in thread
From: john kingsly @ 2001-11-14 3:57 UTC (permalink / raw)
To: ecos-discuss
hello,
I've installed ecos 1.3.1 and have built the intel
x86 development tools for linux synthetic target (in a
pentium m/c on redhat linux 7.1)
I've also installed the ecos configuration
tool-version 2.
Using this configuration tool i tried to configure
and build the ecos from source for linux synthetic
target.after selecting the target(linux synthetic )
and template: default, and the required packages
i clicked the build test(or build library) in the
config tool.but its reporting the following error:
make[1]: i686-pc-linux-gnu-ar : command not found
make[1]: *** [libtarget.a.stamp] error 127
if you could suggest the workaround for this problem
i'd be happy.
regards
kingsly
____________________________________________________________
*NEW* over 2200 active jobs at Yahoo! Careers *NEW*
Visit http://in.careers.yahoo.com/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [ECOS] problem in configuring and building ecos for linux synthetic target
2001-11-14 3:57 [ECOS] problem in configuring and building ecos for linux synthetic target john kingsly
@ 2001-11-14 5:17 ` Andrew Lunn
0 siblings, 0 replies; 3+ messages in thread
From: Andrew Lunn @ 2001-11-14 5:17 UTC (permalink / raw)
To: john kingsly; +Cc: ecos-discuss
On Thu, Nov 22, 2001 at 12:27:08PM +0000, john kingsly wrote:
> hello,
> I've installed ecos 1.3.1 and have built the intel
> x86 development tools for linux synthetic target (in a
> pentium m/c on redhat linux 7.1)
ar is part of the binutils. Do you install those? Check in the
H686-pc-linux-gnu-1.5.2/bin directory. I have found that for some
reason the binutils are installed without the prefix i686-pc-linux-gnu
prefix. If so put in a symbolic link for ar and ld as a quick
workaround.
> I've also installed the ecos configuration
> tool-version 2.
> Using this configuration tool i tried to configure
> and build the ecos from source for linux synthetic
> target.after selecting the target(linux synthetic )
> and template: default, and the required packages
> i clicked the build test(or build library) in the
> config tool.but its reporting the following error:
> make[1]: i686-pc-linux-gnu-ar : command not found
> make[1]: *** [libtarget.a.stamp] error 127
> if you could suggest the workaround for this problem
> i'd be happy.
> regards
> kingsly
>
> ____________________________________________________________
> *NEW* over 2200 active jobs at Yahoo! Careers *NEW*
> Visit http://in.careers.yahoo.com/
^ permalink raw reply [flat|nested] 3+ messages in thread
* [ECOS] problem in configuring and building ecos for linux synthetic target
@ 2001-11-14 4:05 john kingsly
0 siblings, 0 replies; 3+ messages in thread
From: john kingsly @ 2001-11-14 4:05 UTC (permalink / raw)
To: ecos-discuss
hello,
I've installed ecos 1.3.1 and have built the intel
x86 development tools for linux synthetic target (in a
pentium m/c on redhat linux 7.1)
I've also installed the ecos configuration
tool-version 2.
Using this configuration tool i tried to configure
and build the ecos from source for linux synthetic
target.after selecting the target(linux synthetic )
and template: default, and the required packages
i clicked the build test(or build library) in the
config tool.but its reporting the following error:
make[1]: i686-pc-linux-gnu-ar : command not found
make[1]: *** [libtarget.a.stamp] error 127
if you could suggest the workaround for this problem
i'd be happy.
regards
kingsly
____________________________________________________________
*NEW* over 2200 active jobs at Yahoo! Careers *NEW*
Visit http://in.careers.yahoo.com/
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2001-11-22 12:33 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-11-14 3:57 [ECOS] problem in configuring and building ecos for linux synthetic target john kingsly
2001-11-14 5:17 ` Andrew Lunn
2001-11-14 4:05 john kingsly
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).