* Re: [ECOS] EB40A: Using only port 1 in redboot
@ 2003-11-04 6:56 eibach
2003-11-05 14:22 ` Shiv Subramaniam
0 siblings, 1 reply; 3+ messages in thread
From: eibach @ 2003-11-04 6:56 UTC (permalink / raw)
To: smaniam; +Cc: ecos-discuss
Hello,
> Is there a way to compile redboot for using only one
> port (second port) as console in redboot for a EB40A
> derivative build.
Sure. Go to configtool. Turn "Redboot ROM monitor->Build Redboot ROM ELF image->Allow RedBoot to use any I/O channel for its console." to False.
Then set "eCos HAL->ARM architecture->Atmel AT91 variant HAL-> Atmel EB40A eval board HAL->Debug serial port" to "1". While you are there you can set "Console/GDB serial port baud rate" to a higher value if you like (maybe 115200). (You can use that baudrate with gdb by the command "set remotebaud xxx".)
After the changes safe, compile and flash it. Have fun.
Regards,
Dirk
To: smaniam@yahoo.com
Cc: ecos-discuss@sources.redhat.com
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [ECOS] EB40A: Using only port 1 in redboot
2003-11-04 6:56 [ECOS] EB40A: Using only port 1 in redboot eibach
@ 2003-11-05 14:22 ` Shiv Subramaniam
0 siblings, 0 replies; 3+ messages in thread
From: Shiv Subramaniam @ 2003-11-05 14:22 UTC (permalink / raw)
To: eibach; +Cc: ecos-discuss
Thanks Dirk,
That was hepful.
Shiv
--- eibach@gdsys.de wrote:
> Hello,
>
> > Is there a way to compile redboot for using only
> one
> > port (second port) as console in redboot for a
> EB40A
> > derivative build.
>
> Sure. Go to configtool. Turn "Redboot ROM
> monitor->Build Redboot ROM ELF image->Allow RedBoot
> to use any I/O channel for its console." to False.
> Then set "eCos HAL->ARM architecture->Atmel AT91
> variant HAL-> Atmel EB40A eval board HAL->Debug
> serial port" to "1". While you are there you can set
> "Console/GDB serial port baud rate" to a higher
> value if you like (maybe 115200). (You can use that
> baudrate with gdb by the command "set remotebaud
> xxx".)
> After the changes safe, compile and flash it. Have
> fun.
>
> Regards,
> Dirk
>
>
> To: smaniam@yahoo.com
> Cc: ecos-discuss@sources.redhat.com
>
__________________________________
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard
http://antispam.yahoo.com/whatsnewfree
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
^ permalink raw reply [flat|nested] 3+ messages in thread
* [ECOS] EB40A: Using only port 1 in redboot
@ 2003-11-03 17:18 Shiv Subramaniam
0 siblings, 0 replies; 3+ messages in thread
From: Shiv Subramaniam @ 2003-11-03 17:18 UTC (permalink / raw)
To: ecos-discuss
Is there a way to compile redboot for using only one
port (second port) as console in redboot for a EB40A
derivative build.
Thanks,
Shiv
__________________________________
Do you Yahoo!?
Exclusive Video Premiere - Britney Spears
http://launch.yahoo.com/promos/britneyspears/
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2003-11-05 14:22 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-11-04 6:56 [ECOS] EB40A: Using only port 1 in redboot eibach
2003-11-05 14:22 ` Shiv Subramaniam
-- strict thread matches above, loose matches on Subject: below --
2003-11-03 17:18 Shiv Subramaniam
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).