* [ECOS] Adding PCI eth pro100 for testing new port to MPC8313 RDB
@ 2007-11-02 2:22 Oscar Gueta
2007-11-02 6:53 ` [ECOS] SO many ecos problems in learning ecos and they has made me crazy....SOS sean yang
2007-11-02 11:24 ` [ECOS] Adding PCI eth pro100 for testing new port to MPC8313 RDB Gary Thomas
0 siblings, 2 replies; 4+ messages in thread
From: Oscar Gueta @ 2007-11-02 2:22 UTC (permalink / raw)
To: ecos-discuss
Hello all,
In order to fully test the new PCI HAL for
Freescale's MPC8313 RDB I added an Intel PCI ethernet
(pro100) to the source tree as follows under
packages/devs/eth/powerpc/rdb/i82559/current/cdl:
cdl_package CYGPKG_DEVS_ETH_RDB_I82559 {
display "RDB pci intel i82559 ethernet
driver"
description "Ethernet driver for RDB pci intel
i82559."
parent CYGPKG_IO_ETH_DRIVERS
active_if CYGPKG_IO_ETH_DRIVERS
active_if CYGPKG_HAL_POWERPC_RDB
include_dir cyg/io
# FIXME: This really belongs in the INTEL_I82559
package
cdl_interface
CYGINT_DEVS_ETH_INTEL_I82559_REQUIRED {
display "Intel i82559 ethernet driver
required"
}
define_proc {
puts $::cdl_system_header "/***** ethernet
driver proc output start *****/"
puts $::cdl_system_header "#define
CYGDAT_DEVS_ETH_INTEL_I82559_INL
<cyg/io/devs_eth_rdb_i82559.inl>"
puts $::cdl_system_header "#define
CYGDAT_DEVS_ETH_INTEL_I82559_CFG
<pkgconf/devs_eth_rdb_i82559.h>"
puts $::cdl_system_header "/***** ethernet
driver proc output end *****/"
}
.....
I also added a new target to ecos.db in order to
insert the pro100 driver as follows:
package CYGPKG_HAL_POWERPC_RDB {
alias { "FreeScale MPC83xxRDB"
hal_powerpc_rdb powerpc_rdb_hal }
directory hal/powerpc/rdb
script hal_powerpc_rdb.cdl
hardware
description "
The RDB HAL package provides the support
needed to run
eCos on a FreeScale MPC83xx RDB board."
}
target rdb_pr100 {
alias { "FreeScale MPC83xx RDB board
with pro100" }
packages { CYGPKG_HAL_POWERPC
CYGPKG_HAL_POWERPC_MPC831X
CYGPKG_HAL_POWERPC_RDB
CYGPKG_IO_SERIAL_POWERPC_MPC831X
CYGPKG_IO_PCI
CYGPKG_IO_ETH_DRIVERS
CYGPKG_DEVS_ETH_INTEL_I82559
CYGPKG_DEVS_ETH_RDB_I82559
}
description "FreeScale MPC83xx RDB board with
pro100"
}
I created a Redboot minimal configuration, and is
defined as follows:
cdl_configuration eCos {
description "" ;
hardware rdb ;
template redboot ;
package -hardware CYGPKG_HAL_POWERPC current ;
package -hardware CYGPKG_HAL_POWERPC_MPC831X
current ;
package -hardware CYGPKG_HAL_POWERPC_RDB current ;
package -hardware
CYGPKG_DEVS_FLASH_POWERPC_RATTLER current ;
package -hardware CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
current ;
package -hardware CYGPKG_IO_PCI current ;
package -hardware CYGPKG_IO_ETH_DRIVERS current ;
package -hardware CYGPKG_DEVS_ETH_INTEL_I82559
current;
package -hardware CYGPKG_DEVS_ETH_RDB_I82559
current ;
package -template CYGPKG_HAL current ;
package -template CYGPKG_INFRA current ;
package -template CYGPKG_REDBOOT current ;
package -template CYGPKG_ISOINFRA current ;
package -template CYGPKG_LIBC_STRING current ;
package -template CYGPKG_CRC current ;
package CYGPKG_NS_DNS current ;
package CYGPKG_IO_FLASH current ;
};
Without importing the RedBoot, everything
compiles OK. I can see the ethernet driver compiling.
The problem is when Redboot minimal configuration is
imported and tried to be compiled, there are pci
library routines unresolved:
powerpc-eabi-gcc -msoft-float -mcpu=603e -g -nostdlib
-Wl,--gc-sections -Wl,-static
-L/root/ecos/projects/pcieth/pcieth_install/lib
-Ttarget.ld -o
/root/ecos/projects/pcieth/pcieth_install/bin/redboot.elf
/root/ecos/projects/pcieth/pcieth_install/lib/version.o
make[1]: Leaving directory
`/root/ecos/projects/pcieth/pcieth_build/redboot/current'
/root/ecos/projects/pcieth/pcieth_install/lib/extras.o:
In function `rity':
make: Leaving directory
`/root/ecos/projects/pcieth/pcieth_build'
/root/ecos/projects/pcieth/pcieth_install/lib/extras.o(.text.pci_init_find_82559s+0xbc):
undefined reference to `cyg_pci_init'
/root/ecos/projects/pcieth/pcieth_install/lib/extras.o:
In function `CYG_WORD64':
/root/ecos/projects/pcieth/pcieth_install/lib/extras.o(.text.pci_init_find_82559s+0xf8):
undefined reference to `cyg_pci_find_matching'
/root/ecos/projects/pcieth/pcieth_install/lib/extras.o:
In function `_callbacks':
/root/ecos/projects/pcieth/pcieth_install/lib/extras.o(.text.pci_init_find_82559s+0x128):
undefined reference to `cyg_pci_get_device_info'
/root/ecos/projects/pcieth/pcieth_install/lib/extras.o:
In function `yg_flag_t':
/root/ecos/projects/pcieth/pcieth_install/lib/extras.o(.text.pci_init_find_82559s+0x13c):
undefined reference to `cyg_pci_translate_interrupt'
/root/ecos/projects/pcieth/pcieth_install/lib/extras.o:
In function `83xx_t':
/root/ecos/projects/pcieth/pcieth_install/lib/extras.o(.text.pci_init_find_82559s+0x15c):
undefined reference to `cyg_pci_configure_device'
/root/ecos/projects/pcieth/pcieth_install/lib/extras.o:
In function `riority':
/root/ecos/projects/pcieth/pcieth_install/lib/extras.o(.text.pci_init_find_82559s+0x29c):
undefined reference to `cyg_pci_read_config_uint16'
/root/ecos/projects/pcieth/pcieth_install/lib/extras.o:
In function `11ddr_cs_bndsaSERKS_':
/root/ecos/projects/pcieth/pcieth_install/lib/extras.o(.text.pci_init_find_82559s+0x2b8):
undefined reference to `cyg_pci_write_config_uint16'
collect2: ld returned 1 exit status
make[1]: ***
[/root/ecos/projects/pcieth/pcieth_install/bin/redboot.elf]
Error 1
I am completely lost here as in cdl files and in ecm
file PCI is included (I am also positive that library
is compiling and working as far as I can test). Does
anybody have a clue how to fix this code without
making dirty changes in the ethernet driver source
code or makefiles to force the compilation?
Thanks in advance.
/Oscar
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 4+ messages in thread
* [ECOS] SO many ecos problems in learning ecos and they has made me crazy....SOS....
2007-11-02 2:22 [ECOS] Adding PCI eth pro100 for testing new port to MPC8313 RDB Oscar Gueta
@ 2007-11-02 6:53 ` sean yang
2007-11-02 11:24 ` [ECOS] Adding PCI eth pro100 for testing new port to MPC8313 RDB Gary Thomas
1 sibling, 0 replies; 4+ messages in thread
From: sean yang @ 2007-11-02 6:53 UTC (permalink / raw)
To: ecos-discuss
I just learned to use ecos to build a i386 redboot follwing the http://ecos.
sourceware.org/,and I am confused by what I got:
1. I downloaded the ecos via wget as the instruction of
http://ecos.sourceware.org/getstart.html: wget --passive-ftp
ftp://ecos.sourceware.org/pub/ecos/ecos-install.tcl and install
It,the ecos has been installed with the directory structure such
as:ecos/ecos-2.0/packages/hal/i386/arch/ecos-2.0;
2. Then,I got the snapshot via
http://www.ecoscentric.com/devzone/snapshots.shtml and reinstalled it ,this
time the directory structre is ok as normal mentioned:
ecos/packages/hal/i386/arch/current;
3. Then,I use the snapshot version to build the i386 and arm tool
chains,and then the redboot for i386 with configtool.exe(Version
0607)----BTW,and I don’t know how to get the configuretool_v1.3.net for
MLT---there is a error for building which confusing me so long a time:
i386-elf-gcc -c -I/ecos-d/ecos_working/redboot/example_i386_install/include
-I/ecos-d/ecos/packages/hal/i386/arch/current
-I/ecos-d/ecos/packages/hal/i386/arch/current/src
-I/ecos-d/ecos/packages/hal/i386/arch/current/tests -I.
-I/ecos-d/ecos/packages/hal/i386/arch/current/src/ -finline-limit=7000 -Wall
-Wpointer-arith -Wstrict-prototypes -Winline -Wundef -g -O2
-ffunction-sections -fdata-sections -fno-exceptions
-Wp,-MD,src/hal_syscall.tmp -o src/hal_i386_arch_hal_syscall.o
/ecos-d/ecos/packages/hal/i386/arch/current/src/hal_syscall.c
/ecos-d/ecos/packages/hal/i386/arch/current/src/hal_syscall.c: In function
'hal_syscall_handler':
/ecos-d/ecos/packages/hal/i386/arch/current/src/hal_syscall.c:113: warning:
implicit declaration of function 'get_register'
/ecos-d/ecos/packages/hal/i386/arch/current/src/hal_syscall.c:113: error:
'EAX' undeclared (first use in this function)
/ecos-d/ecos/packages/hal/i386/arch/current/src/hal_syscall.c:113: error:
(Each undeclared identifier is reported only once
/ecos-d/ecos/packages/hal/i386/arch/current/src/hal_syscall.c:113: error:
for each function it appears in.)
/ecos-d/ecos/packages/hal/i386/arch/current/src/hal_syscall.c:114: error:
'EBX' undeclared (first use in this function)
/ecos-d/ecos/packages/hal/i386/arch/current/src/hal_syscall.c:115: error:
'ECX' undeclared (first use in this function)
/ecos-d/ecos/packages/hal/i386/arch/current/src/hal_syscall.c:116: error:
'EDX' undeclared (first use in this function)
/ecos-d/ecos/packages/hal/i386/arch/current/src/hal_syscall.c:135: warning:
implicit declaration of function 'put_register'
/ecos-d/ecos/packages/hal/i386/arch/current/src/hal_syscall.c:145: error:
'SIGTRAP' undeclared (first use in this function)
In file included from
/ecos-d/ecos/packages/hal/i386/arch/current/src/redboot_linux_exec.c:52:
/ecos-d/ecos_working/redboot/example_i386_install/include/redboot.h:66:25:
error: cyg/crc/crc.h: No such file or directory
make[1]: Leaving directory
`/ecos-d/ecos_working/redboot/example_i386_build/hal/i386/arch/current'
make[1]: *** [src/hal_syscall.o.d] Error 1
make: Leaving directory `/ecos-d/ecos_working/redboot/example_i386_build'
make[1]: *** Waiting for unfinished jobs....
/ecos-d/ecos/packages/hal/i386/arch/current/src/redboot_linux_exec.c: In
function 'do_exec':
/ecos-d/ecos/packages/hal/i386/arch/current/src/redboot_linux_exec.c:261:
warning: implicit declaration of function 'cyg_hal_plf_screen_position'
make[1]: *** [src/redboot_linux_exec.o.d] Error 1
make: *** [build] Error 2
4. from the make log,there are two errors which I don’t know why at all
because:
1).EAX has been declared in i386_stub.h and this file will be included by
hal_syscall.c if CYGSEM_REDBOOT_BSP_SYSCALLS defined,and I am sure that the
MACRO CYGSEM_REDBOOT_BSP_SYSCALLS has been defined;
2).the cyg/crc/crc.h:this file will be included in redboot.h,but I
couldn’t find this file in this directory,why?could anyone tell me ?
5.I want to rebuild the confiuretool with the latest snapshot version,and I
followed the http://www.ecoscentric.com/devzone/configtool.shtml
But the $HOME can not be understood by cygwin bash ,why?
Thank u very much …..
Sean Yang
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [ECOS] Adding PCI eth pro100 for testing new port to MPC8313 RDB
2007-11-02 2:22 [ECOS] Adding PCI eth pro100 for testing new port to MPC8313 RDB Oscar Gueta
2007-11-02 6:53 ` [ECOS] SO many ecos problems in learning ecos and they has made me crazy....SOS sean yang
@ 2007-11-02 11:24 ` Gary Thomas
1 sibling, 0 replies; 4+ messages in thread
From: Gary Thomas @ 2007-11-02 11:24 UTC (permalink / raw)
To: Oscar Gueta; +Cc: ecos-discuss
Oscar Gueta wrote:
> Hello all,
>
> In order to fully test the new PCI HAL for
> Freescale's MPC8313 RDB I added an Intel PCI ethernet
> (pro100) to the source tree as follows under
> packages/devs/eth/powerpc/rdb/i82559/current/cdl:
>
> cdl_package CYGPKG_DEVS_ETH_RDB_I82559 {
> display "RDB pci intel i82559 ethernet
> driver"
> description "Ethernet driver for RDB pci intel
> i82559."
>
> parent CYGPKG_IO_ETH_DRIVERS
> active_if CYGPKG_IO_ETH_DRIVERS
> active_if CYGPKG_HAL_POWERPC_RDB
>
> include_dir cyg/io
>
> # FIXME: This really belongs in the INTEL_I82559
> package
> cdl_interface
> CYGINT_DEVS_ETH_INTEL_I82559_REQUIRED {
> display "Intel i82559 ethernet driver
> required"
> }
>
> define_proc {
> puts $::cdl_system_header "/***** ethernet
> driver proc output start *****/"
> puts $::cdl_system_header "#define
> CYGDAT_DEVS_ETH_INTEL_I82559_INL
> <cyg/io/devs_eth_rdb_i82559.inl>"
> puts $::cdl_system_header "#define
> CYGDAT_DEVS_ETH_INTEL_I82559_CFG
> <pkgconf/devs_eth_rdb_i82559.h>"
> puts $::cdl_system_header "/***** ethernet
> driver proc output end *****/"
> }
>
> .....
>
> I also added a new target to ecos.db in order to
> insert the pro100 driver as follows:
>
> package CYGPKG_HAL_POWERPC_RDB {
> alias { "FreeScale MPC83xxRDB"
> hal_powerpc_rdb powerpc_rdb_hal }
> directory hal/powerpc/rdb
> script hal_powerpc_rdb.cdl
> hardware
> description "
> The RDB HAL package provides the support
> needed to run
> eCos on a FreeScale MPC83xx RDB board."
> }
>
> target rdb_pr100 {
> alias { "FreeScale MPC83xx RDB board
> with pro100" }
> packages { CYGPKG_HAL_POWERPC
> CYGPKG_HAL_POWERPC_MPC831X
> CYGPKG_HAL_POWERPC_RDB
>
> CYGPKG_IO_SERIAL_POWERPC_MPC831X
> CYGPKG_IO_PCI
> CYGPKG_IO_ETH_DRIVERS
> CYGPKG_DEVS_ETH_INTEL_I82559
> CYGPKG_DEVS_ETH_RDB_I82559
>
> }
> description "FreeScale MPC83xx RDB board with
> pro100"
> }
>
>
> I created a Redboot minimal configuration, and is
> defined as follows:
>
> cdl_configuration eCos {
> description "" ;
> hardware rdb ;
> template redboot ;
> package -hardware CYGPKG_HAL_POWERPC current ;
> package -hardware CYGPKG_HAL_POWERPC_MPC831X
> current ;
> package -hardware CYGPKG_HAL_POWERPC_RDB current ;
> package -hardware
> CYGPKG_DEVS_FLASH_POWERPC_RATTLER current ;
> package -hardware CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
> current ;
> package -hardware CYGPKG_IO_PCI current ;
> package -hardware CYGPKG_IO_ETH_DRIVERS current ;
> package -hardware CYGPKG_DEVS_ETH_INTEL_I82559
> current;
> package -hardware CYGPKG_DEVS_ETH_RDB_I82559
> current ;
> package -template CYGPKG_HAL current ;
> package -template CYGPKG_INFRA current ;
> package -template CYGPKG_REDBOOT current ;
> package -template CYGPKG_ISOINFRA current ;
> package -template CYGPKG_LIBC_STRING current ;
> package -template CYGPKG_CRC current ;
> package CYGPKG_NS_DNS current ;
> package CYGPKG_IO_FLASH current ;
> };
>
>
> Without importing the RedBoot, everything
> compiles OK. I can see the ethernet driver compiling.
> The problem is when Redboot minimal configuration is
> imported and tried to be compiled, there are pci
> library routines unresolved:
>
> powerpc-eabi-gcc -msoft-float -mcpu=603e -g -nostdlib
> -Wl,--gc-sections -Wl,-static
> -L/root/ecos/projects/pcieth/pcieth_install/lib
> -Ttarget.ld -o
> /root/ecos/projects/pcieth/pcieth_install/bin/redboot.elf
> /root/ecos/projects/pcieth/pcieth_install/lib/version.o
> make[1]: Leaving directory
> `/root/ecos/projects/pcieth/pcieth_build/redboot/current'
> /root/ecos/projects/pcieth/pcieth_install/lib/extras.o:
> In function `rity':
> make: Leaving directory
> `/root/ecos/projects/pcieth/pcieth_build'
> /root/ecos/projects/pcieth/pcieth_install/lib/extras.o(.text.pci_init_find_82559s+0xbc):
> undefined reference to `cyg_pci_init'
> /root/ecos/projects/pcieth/pcieth_install/lib/extras.o:
> In function `CYG_WORD64':
> /root/ecos/projects/pcieth/pcieth_install/lib/extras.o(.text.pci_init_find_82559s+0xf8):
> undefined reference to `cyg_pci_find_matching'
> /root/ecos/projects/pcieth/pcieth_install/lib/extras.o:
> In function `_callbacks':
> /root/ecos/projects/pcieth/pcieth_install/lib/extras.o(.text.pci_init_find_82559s+0x128):
> undefined reference to `cyg_pci_get_device_info'
> /root/ecos/projects/pcieth/pcieth_install/lib/extras.o:
> In function `yg_flag_t':
> /root/ecos/projects/pcieth/pcieth_install/lib/extras.o(.text.pci_init_find_82559s+0x13c):
> undefined reference to `cyg_pci_translate_interrupt'
> /root/ecos/projects/pcieth/pcieth_install/lib/extras.o:
> In function `83xx_t':
> /root/ecos/projects/pcieth/pcieth_install/lib/extras.o(.text.pci_init_find_82559s+0x15c):
> undefined reference to `cyg_pci_configure_device'
> /root/ecos/projects/pcieth/pcieth_install/lib/extras.o:
> In function `riority':
> /root/ecos/projects/pcieth/pcieth_install/lib/extras.o(.text.pci_init_find_82559s+0x29c):
> undefined reference to `cyg_pci_read_config_uint16'
> /root/ecos/projects/pcieth/pcieth_install/lib/extras.o:
> In function `11ddr_cs_bndsaSERKS_':
> /root/ecos/projects/pcieth/pcieth_install/lib/extras.o(.text.pci_init_find_82559s+0x2b8):
> undefined reference to `cyg_pci_write_config_uint16'
> collect2: ld returned 1 exit status
> make[1]: ***
> [/root/ecos/projects/pcieth/pcieth_install/bin/redboot.elf]
> Error 1
>
>
> I am completely lost here as in cdl files and in ecm
> file PCI is included (I am also positive that library
> is compiling and working as far as I can test). Does
> anybody have a clue how to fix this code without
> making dirty changes in the ethernet driver source
> code or makefiles to force the compilation?
It looks like you are missing the hardware support functions for PCI
on your architecture.
If you look at '.../packages/io/pci/current/src/pci.c', you'll see
these comments:
// CYG_PCI_PRESENT only gets defined for targets that provide PCI HAL support.
// See pci_hw.h for details.
#ifdef CYG_PCI_PRESENT
... all the generic code is protected by this #ifdef
Look at how PCI is supported on other platforms.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [ECOS] SO many ecos problems in learning ecos and they has made me crazy....SOS....
[not found] <20071102065317.77BB6195020F@mail.chez-thomas.org>
@ 2007-11-02 12:10 ` Gary Thomas
0 siblings, 0 replies; 4+ messages in thread
From: Gary Thomas @ 2007-11-02 12:10 UTC (permalink / raw)
To: sean yang; +Cc: ecos-discuss
sean yang wrote:
> I just learned to use ecos to build a i386 redboot follwing the http://ecos.
> sourceware.org/拢卢and I am confused by what I got:
>
> 1. I downloaded the ecos via wget as the instruction of
> http://ecos.sourceware.org/getstart.html: wget --passive-ftp
> ftp://ecos.sourceware.org/pub/ecos/ecos-install.tcl and install
>
> It,the ecos has been installed with the directory structure such
> as:ecos/ecos-2.0/packages/hal/i386/arch/ecos-2.0;
>
> 2. Then,I got the snapshot via
> http://www.ecoscentric.com/devzone/snapshots.shtml and reinstalled it ,this
> time the directory structre is ok as normal mentioned:
>
> ecos/packages/hal/i386/arch/current;
>
> 3. Then,I use the snapshot version to build the i386 and arm tool
> chains,and then the redboot for i386 with configtool.exe(Version
> 0607)----BTW,and I don隆炉t know how to get the configuretool_v1.3.net for
> MLT---there is a error for building which confusing me so long a time:
>
>
>
> i386-elf-gcc -c -I/ecos-d/ecos_working/redboot/example_i386_install/include
> -I/ecos-d/ecos/packages/hal/i386/arch/current
> -I/ecos-d/ecos/packages/hal/i386/arch/current/src
> -I/ecos-d/ecos/packages/hal/i386/arch/current/tests -I.
> -I/ecos-d/ecos/packages/hal/i386/arch/current/src/ -finline-limit=7000 -Wall
> -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -g -O2
> -ffunction-sections -fdata-sections -fno-exceptions
> -Wp,-MD,src/hal_syscall.tmp -o src/hal_i386_arch_hal_syscall.o
> /ecos-d/ecos/packages/hal/i386/arch/current/src/hal_syscall.c
>
> /ecos-d/ecos/packages/hal/i386/arch/current/src/hal_syscall.c: In function
> 'hal_syscall_handler':
>
> /ecos-d/ecos/packages/hal/i386/arch/current/src/hal_syscall.c:113: warning:
> implicit declaration of function 'get_register'
>
> /ecos-d/ecos/packages/hal/i386/arch/current/src/hal_syscall.c:113: error:
> 'EAX' undeclared (first use in this function)
>
> /ecos-d/ecos/packages/hal/i386/arch/current/src/hal_syscall.c:113: error:
> (Each undeclared identifier is reported only once
>
> /ecos-d/ecos/packages/hal/i386/arch/current/src/hal_syscall.c:113: error:
> for each function it appears in.)
>
> /ecos-d/ecos/packages/hal/i386/arch/current/src/hal_syscall.c:114: error:
> 'EBX' undeclared (first use in this function)
>
> /ecos-d/ecos/packages/hal/i386/arch/current/src/hal_syscall.c:115: error:
> 'ECX' undeclared (first use in this function)
>
> /ecos-d/ecos/packages/hal/i386/arch/current/src/hal_syscall.c:116: error:
> 'EDX' undeclared (first use in this function)
>
> /ecos-d/ecos/packages/hal/i386/arch/current/src/hal_syscall.c:135: warning:
> implicit declaration of function 'put_register'
>
> /ecos-d/ecos/packages/hal/i386/arch/current/src/hal_syscall.c:145: error:
> 'SIGTRAP' undeclared (first use in this function)
>
> In file included from
> /ecos-d/ecos/packages/hal/i386/arch/current/src/redboot_linux_exec.c:52:
>
> /ecos-d/ecos_working/redboot/example_i386_install/include/redboot.h:66:25:
> error: cyg/crc/crc.h: No such file or directory
>
> make[1]: Leaving directory
> `/ecos-d/ecos_working/redboot/example_i386_build/hal/i386/arch/current'
>
> make[1]: *** [src/hal_syscall.o.d] Error 1
>
> make: Leaving directory `/ecos-d/ecos_working/redboot/example_i386_build'
>
> make[1]: *** Waiting for unfinished jobs....
>
> /ecos-d/ecos/packages/hal/i386/arch/current/src/redboot_linux_exec.c: In
> function 'do_exec':
>
> /ecos-d/ecos/packages/hal/i386/arch/current/src/redboot_linux_exec.c:261:
> warning: implicit declaration of function 'cyg_hal_plf_screen_position'
>
> make[1]: *** [src/redboot_linux_exec.o.d] Error 1
>
> make: *** [build] Error 2
>
>
>
> 4. from the make log,there are two errors which I don隆炉t know why at all
> because:
>
> 1).EAX has been declared in i386_stub.h and this file will be included by
> hal_syscall.c if CYGSEM_REDBOOT_BSP_SYSCALLS defined,and I am sure that the
> MACRO CYGSEM_REDBOOT_BSP_SYSCALLS has been defined;
>
> 2).the cyg/crc/crc.h:this file will be included in redboot.h,but I
> couldn隆炉t find this file in this directory,why?could anyone tell me ?
Exactly how did you configure eCos (please explain all the steps)?
For example, I can build RedBoot for the i386/PC using these steps:
% ecosconfig new pc redboot
% ecosconfig import ${ECOS_REPOSITORY}/hal/i386/pc/current/misc/redboot_GRUB.ecm
% ecosconfig tree
% make
> 5.I want to rebuild the confiuretool with the latest snapshot version,and I
> followed the http://www.ecoscentric.com/devzone/configtool.shtml
Why do you want to rebuild the config tool (an arduous task, even for
the seasoned traveler!)??
> But the $HOME can not be understood by cygwin bash ,why?
You'll need to explain what error you are getting.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2007-11-02 12:10 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-11-02 2:22 [ECOS] Adding PCI eth pro100 for testing new port to MPC8313 RDB Oscar Gueta
2007-11-02 6:53 ` [ECOS] SO many ecos problems in learning ecos and they has made me crazy....SOS sean yang
2007-11-02 11:24 ` [ECOS] Adding PCI eth pro100 for testing new port to MPC8313 RDB Gary Thomas
[not found] <20071102065317.77BB6195020F@mail.chez-thomas.org>
2007-11-02 12:10 ` [ECOS] SO many ecos problems in learning ecos and they has made me crazy....SOS Gary Thomas
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).