[ECOS] ECOS 2.0 build help: mips_size.ecc: error

[ECOS] ECOS 2.0 build help: mips_size.ecc: error

[netadmin @dslextreme.com]

Hi, I am trying to follow the instruction from Netgear GS108T switch
to build its firmware.
It is MIPS based chip.  I followed the instruction and download and
installed ECOS.
Then I realized the original firmware was based on ECOS 2.0.  So I download from
the ECOS mirror site the 2.0.

After applied the source code, I ran this command:
$ECOS_CORE/tools/bin/ecosconfig --config=../mips_size.ecc
--srcdir=$ECOS_CORE/packages --prefix=$ECOS_CORE/mips_install tree

But I got a lot of errors:

../mips_size.ecc: error
    Attempt to load an unknown package `CYGPKG_HAL_MIPS_BCM47xx'.
../mips_size.ecc: error
    Attempt to load an unknown package `CYGPKG_HAL_MIPS_BCM953710'.
../mips_size.ecc: error
    Attempt to load an unknown package `CYGPKG_IO_SERIAL_MIPS_BCM947xx'.
../mips_size.ecc: error
    Attempt to load an unknown package `CYGPKG_DEVS_FLASH_MIPS_BCM947xx'.
../mips_size.ecc: error
    Attempt to load an unknown package `CYGPKG_LOGGING'.
../mips_size.ecc: error
    The savefile contains a cdl_component command for an unknown
component `CYGBLD_GLOBAL_OPTIONS'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGBLD_GLOBAL_COMMAND_PREFIX'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGBLD_GLOBAL_CFLAGS'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGBLD_GLOBAL_LDFLAGS'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGBLD_BUILD_GDB_STUBS'
../mips_size.ecc: error
    The savefile contains a cdl_component command for an unknown
component `CYGPKG_CYGMON_HAL_OPTIONS'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGBLD_BUILD_CYGMON_BIN'
../mips_size.ecc: error
    The savefile contains a cdl_component command for an unknown
component `CYGPKG_REDBOOT_HAL_OPTIONS'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGBLD_BUILD_REDBOOT_BIN'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGSEM_HAL_USE_ROM_MONITOR'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGSEM_HAL_ROM_MONITOR'
../mips_size.ecc: error
    The savefile contains a cdl_package command for
`CYGPKG_HAL_MIPS_BCM47xx' which has not been loaded.
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGHWR_HAL_MIPS_FPU'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGPKG_HAL_MIPS_LSBFIRST'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGHWR_HAL_MIPS_CPU_FREQ_ACTUAL'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGBLD_LINKER_SCRIPT'
../mips_size.ecc: error
    The savefile contains a cdl_package command for
`CYGPKG_HAL_MIPS_BCM953710' which has not been loaded.
../mips_size.ecc: error
    The savefile contains a cdl_component command for an unknown
component `CYG_HAL_STARTUP'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD'
../mips_size.ecc: error
    The savefile contains a cdl_component command for an unknown
component `CYGNUM_HAL_RTC_CONSTANTS'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGNUM_HAL_RTC_NUMERATOR'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGNUM_HAL_RTC_DENOMINATOR'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGNUM_HAL_RTC_PERIOD'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGNUM_HAL_BREAKPOINT_LIST_SIZE'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL'
../mips_size.ecc: error
    The savefile contains a cdl_component command for an unknown
component `CYGHWR_MEMORY_LAYOUT'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGHWR_MEMORY_LAYOUT_LDI'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGHWR_MEMORY_LAYOUT_H'
../mips_size.ecc: error
    The savefile contains a cdl_package command for
`CYGPKG_IO_SERIAL_MIPS_BCM947xx' which has not been loaded.
../mips_size.ecc: error
    The savefile contains a cdl_interface command for an unknown
interface `CYGINT_IO_SERIAL_GENERIC_16X5X_REQUIRED'.
../mips_size.ecc: error
    The savefile contains a cdl_component command for an unknown
component `CYGPKG_IO_SERIAL_MIPS_BCM947xx_SERIAL0'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGDAT_IO_SERIAL_MIPS_BCM947xx_SERIAL0_NAME'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGNUM_IO_SERIAL_MIPS_BCM947xx_SERIAL0_BAUD'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGNUM_IO_SERIAL_MIPS_BCM947xx_SERIAL0_BUFSIZE'
../mips_size.ecc: error
    The savefile contains a cdl_component command for an unknown
component `CYGPKG_IO_SERIAL_MIPS_BCM947xx_SERIAL1'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGDAT_IO_SERIAL_MIPS_BCM947xx_SERIAL1_NAME'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGNUM_IO_SERIAL_MIPS_BCM947xx_SERIAL1_BAUD'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGNUM_IO_SERIAL_MIPS_BCM947xx_SERIAL1_BUFSIZE'
../mips_size.ecc: error
    The savefile contains a cdl_component command for an unknown
component `CYGPKG_IO_SERIAL_MIPS_BCM947xx_TESTING'
../mips_size.ecc: error
    The savefile contains a cdl_option for an unknown option
`CYGPRI_SER_TEST_SER_DEV'
../mips_size.ecc: error
    The savefile contains a cdl_package command for
`CYGPKG_DEVS_FLASH_MIPS_BCM947xx' which has not been loaded.
../mips_size.ecc: error
    The savefile contains a cdl_interface command for an unknown
interface `CYGINT_DEVS_FLASH_CFI_REQUIRED'.
../mips_size.ecc: error
    The savefile contains a cdl_package command for `CYGPKG_LOGGING'
which has not been loaded.
Invalid savefile "../mips_size.ecc".


What is wrong with this mips_size.ecc?  Where can I find the correct one?

Thanks for your help!

--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

Re: [ECOS] ECOS 2.0 build help: mips_size.ecc: error

[Andrew Lunn]

On Fri, Apr 10, 2009 at 03:52:06PM -0700, netadmin @dslextreme.com wrote:
> Hi, I am trying to follow the instruction from Netgear GS108T switch
> to build its firmware.
> It is MIPS based chip.? I followed the instruction and download and
> installed ECOS.
> Then I realized the original firmware was based on ECOS 2.0.? So I download from
> the ECOS mirror site the 2.0.
> 
> After applied the source code, I ran this command:
> $ECOS_CORE/tools/bin/ecosconfig --config=../mips_size.ecc
> --srcdir=$ECOS_CORE/packages --prefix=$ECOS_CORE/mips_install tree
> 
> But I got a lot of errors:
> 
> ../mips_size.ecc: error
> ??? Attempt to load an unknown package `CYGPKG_HAL_MIPS_BCM47xx'.
> ../mips_size.ecc: error
> ??? Attempt to load an unknown package `CYGPKG_HAL_MIPS_BCM953710'.
> ../mips_size.ecc: error
> ??? Attempt to load an unknown package `CYGPKG_IO_SERIAL_MIPS_BCM947xx'.
> ../mips_size.ecc: error
> ??? Attempt to load an unknown package `CYGPKG_DEVS_FLASH_MIPS_BCM947xx'.
> ../mips_size.ecc: error
> ??? Attempt to load an unknown package `CYGPKG_LOGGING'.
> ../mips_size.ecc: error

These packages don't exist in eCos 2.0. I guess Netgear have made some
changes to eCos. Did they supply a patch with these new packages?

        Andrew

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

Re: [ECOS] ECOS 2.0 build help: mips_size.ecc: error

[netadmin @dslextreme.com]

Netgear did provide their code here:
ftp://downloads.netgear.com/files/GPL/GS108T_V1.0.1_03_src.zip
Are you saying those package is missing from their released code?

On Sat, Apr 11, 2009 at 12:41 AM, Andrew Lunn <andrew@lunn.ch> wrote:
> On Fri, Apr 10, 2009 at 03:52:06PM -0700, netadmin @dslextreme.com wrote:
>> Hi, I am trying to follow the instruction from Netgear GS108T switch
>> to build its firmware.
>> It is MIPS based chip.? I followed the instruction and download and
>> installed ECOS.
>> Then I realized the original firmware was based on ECOS 2.0.? So I download from
>> the ECOS mirror site the 2.0.
>>
>> After applied the source code, I ran this command:
>> $ECOS_CORE/tools/bin/ecosconfig --config=../mips_size.ecc
>> --srcdir=$ECOS_CORE/packages --prefix=$ECOS_CORE/mips_install tree
>>
>> But I got a lot of errors:
>>
>> ../mips_size.ecc: error
>> ??? Attempt to load an unknown package `CYGPKG_HAL_MIPS_BCM47xx'.
>> ../mips_size.ecc: error
>> ??? Attempt to load an unknown package `CYGPKG_HAL_MIPS_BCM953710'.
>> ../mips_size.ecc: error
>> ??? Attempt to load an unknown package `CYGPKG_IO_SERIAL_MIPS_BCM947xx'.
>> ../mips_size.ecc: error
>> ??? Attempt to load an unknown package `CYGPKG_DEVS_FLASH_MIPS_BCM947xx'.
>> ../mips_size.ecc: error
>> ??? Attempt to load an unknown package `CYGPKG_LOGGING'.
>> ../mips_size.ecc: error
>
> These packages don't exist in eCos 2.0. I guess Netgear have made some
> changes to eCos. Did they supply a patch with these new packages?
>
>        Andrew
>

--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss

Re: [ECOS] ECOS 2.0 build help: mips_size.ecc: error

[Gary Thomas]

netadmin @dslextreme.com wrote:
> Netgear did provide their code here:
> ftp://downloads.netgear.com/files/GPL/GS108T_V1.0.1_03_src.zip
> Are you saying those package is missing from their released code?

This file only contains the files NetGear changed which according to
their install document should be overlaid onto the eCos 2.0 standard
tree.  However, they did *not* provide their changes to 'ecos.db',
nor the sources to any of the packages they added.

IMO, they are not abiding by the GPL :-(

> On Sat, Apr 11, 2009 at 12:41 AM, Andrew Lunn <andrew@lunn.ch> wrote:
>> On Fri, Apr 10, 2009 at 03:52:06PM -0700, netadmin @dslextreme.com wrote:
>>> Hi, I am trying to follow the instruction from Netgear GS108T switch
>>> to build its firmware.
>>> It is MIPS based chip.? I followed the instruction and download and
>>> installed ECOS.
>>> Then I realized the original firmware was based on ECOS 2.0.? So I download from
>>> the ECOS mirror site the 2.0.
>>>
>>> After applied the source code, I ran this command:
>>> $ECOS_CORE/tools/bin/ecosconfig --config=../mips_size.ecc
>>> --srcdir=$ECOS_CORE/packages --prefix=$ECOS_CORE/mips_install tree
>>>
>>> But I got a lot of errors:
>>>
>>> ../mips_size.ecc: error
>>> ??? Attempt to load an unknown package `CYGPKG_HAL_MIPS_BCM47xx'.
>>> ../mips_size.ecc: error
>>> ??? Attempt to load an unknown package `CYGPKG_HAL_MIPS_BCM953710'.
>>> ../mips_size.ecc: error
>>> ??? Attempt to load an unknown package `CYGPKG_IO_SERIAL_MIPS_BCM947xx'.
>>> ../mips_size.ecc: error
>>> ??? Attempt to load an unknown package `CYGPKG_DEVS_FLASH_MIPS_BCM947xx'.
>>> ../mips_size.ecc: error
>>> ??? Attempt to load an unknown package `CYGPKG_LOGGING'.
>>> ../mips_size.ecc: error
>> These packages don't exist in eCos 2.0. I guess Netgear have made some
>> changes to eCos. Did they supply a patch with these new packages?
>>
>>        Andrew
>>
> 


-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------

-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss