* [ECOS] RE: Configtool setting for a prebuilt gnu toolchain
@ 2008-05-19 15:09 Sangeeta Ghangam
0 siblings, 0 replies; only message in thread
From: Sangeeta Ghangam @ 2008-05-19 15:09 UTC (permalink / raw)
To: Dileep Kumar, ecos-discuss
Thanks for the reply...looks like toolchains built using cygwin only can
be used with ecos on windows
________________________________________
From: Dileep Kumar [mailto:dileepkumart@gmail.com]
Sent: Monday, May 19, 2008 2:56 AM
To: Sangeeta Ghangam; ecos-discuss@sourceware.org
Subject: Fwd: Configtool setting for a prebuilt gnu toolchain
In the ecos config tool you need to set two paths( Under Tools menu) :
1) build Tool 2)User Tool.
1)To set build tool ,you need to download arm cross compiler from
ftp://ecos.sourceware.org/pub/ecos/gnutools/cygwin/ and set the path to
folder
which contain the cross compiler
2)To set user tool path, you need to install cygwin and set the path
cygwin\bin
--- Dileep Kumar
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2008-05-19 15:09 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-05-19 15:09 [ECOS] RE: Configtool setting for a prebuilt gnu toolchain Sangeeta Ghangam
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).