* [ECOS] standalone Redboot configuration
@ 2007-05-03 6:54 Jacob Avraham
2007-05-03 11:07 ` Gary Thomas
0 siblings, 1 reply; 3+ messages in thread
From: Jacob Avraham @ 2007-05-03 6:54 UTC (permalink / raw)
To: ecos-discuss
Hi,
I'd like to run a standalone configuration of Redboot out of RAM, using
a BDI debugger
to download it to memory. I tried redboot_RAM, but after some
instructions it trapped
into debug mode.
Is redboot_RAM capable of running standalone, or does it rely on
pre-existing setup
That perhaps redboot_ROM is doing?
How should I configure redboot to run standalone out of RAM?
Thanks,
Jacob Avraham
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [ECOS] standalone Redboot configuration
2007-05-03 6:54 [ECOS] standalone Redboot configuration Jacob Avraham
@ 2007-05-03 11:07 ` Gary Thomas
2007-05-03 12:17 ` Jacob Avraham
0 siblings, 1 reply; 3+ messages in thread
From: Gary Thomas @ 2007-05-03 11:07 UTC (permalink / raw)
To: Jacob Avraham; +Cc: ecos-discuss
Jacob Avraham wrote:
> Hi,
>
> I'd like to run a standalone configuration of Redboot out of RAM, using
> a BDI debugger
> to download it to memory. I tried redboot_RAM, but after some
> instructions it trapped
> into debug mode.
> Is redboot_RAM capable of running standalone, or does it rely on
> pre-existing setup
> That perhaps redboot_ROM is doing?
> How should I configure redboot to run standalone out of RAM?
What's the platform? Most targets can run RedBoot from RAM,
but some (in particular most ARM targets) cannot without some
massaging.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: [ECOS] standalone Redboot configuration
2007-05-03 11:07 ` Gary Thomas
@ 2007-05-03 12:17 ` Jacob Avraham
0 siblings, 0 replies; 3+ messages in thread
From: Jacob Avraham @ 2007-05-03 12:17 UTC (permalink / raw)
To: Gary Thomas; +Cc: ecos-discuss
> -----Original Message-----
> From: Gary Thomas [mailto:gary@mlbassoc.com]
> Sent: Thursday, May 03, 2007 2:07 PM
> To: Jacob Avraham
> Cc: ecos-discuss@ecos.sourceware.org
> Subject: Re: [ECOS] standalone Redboot configuration
>
> Jacob Avraham wrote:
> > Hi,
> >
> > I'd like to run a standalone configuration of Redboot out of RAM,
using
> > a BDI debugger
> > to download it to memory. I tried redboot_RAM, but after some
> > instructions it trapped
> > into debug mode.
> > Is redboot_RAM capable of running standalone, or does it rely on
> > pre-existing setup
> > That perhaps redboot_ROM is doing?
> > How should I configure redboot to run standalone out of RAM?
>
> What's the platform? Most targets can run RedBoot from RAM,
> but some (in particular most ARM targets) cannot without some
> massaging.
>
The target is IXDP425
> --
> ------------------------------------------------------------
> Gary Thomas | Consulting for the
> MLB Associates | Embedded world
> ------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2007-05-03 12:17 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-05-03 6:54 [ECOS] standalone Redboot configuration Jacob Avraham
2007-05-03 11:07 ` Gary Thomas
2007-05-03 12:17 ` Jacob Avraham
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).