[ECOS] Problems with eCos Configuration Tool

[ECOS] Problems with eCos Configuration Tool

[Alexander Drzeniek]

Hello All,
i got some problems with eCos configuration tool 1.3.1.1, working 
on Win NT or Win2000, using Cygwin 2.24 , HAL for the Atmel 
EB01 from Carl van Schaik. If i do some changes at the 
Configuration and start the build-process, config-tool stops and 
shows this error:
--------------------------------------------------------------------------------
  arm-AT91-elf-gcc -c  -I//G/cygwin/home/doc_install/include
-
I//D/Programme/REDHAT~1/eCos/packages/language/c/libm/curren
t
-
I//D/Programme/REDHAT~1/eCos/packages/language/c/libm/curren
t/src
-
I//D/Programme/REDHAT~1/eCos/packages/language/c/libm/curren
t/tests -I.
-
I//D/Programme/REDHAT~1/eCos/packages/language/c/libm/curren
t/src/double/portable-api/
-mcpu=arm7tdmi -Wall -Wpointer-arith -Wstrict-prototypes -Winline 
-Wundef -Woverloaded-virtual
-g -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -
fvtable-gc
-finit-priority -Wp,-MD,src/double/portable-api/s_tan.tmp -o
src/double/portable-api/language_c_libm_s_tan.o
//D/Programme/REDHAT~1/eCos/packages/language/c/libm/current
/src/double/portable-api/s_tan.c
arm-AT91-elf-gcc -c  -I//G/cygwin/home/doc_install/include
-
I//D/Programme/REDHAT~1/eCos/packages/language/c/libm/curren
t
-
I//D/Programme/REDHAT~1/eCos/packages/language/c/libm/curren
t/src
-
I//D/Programme/REDHAT~1/eCos/packages/language/c/libm/curren
t/tests -I.
-
I//D/Programme/REDHAT~1/eCos/packages/language/c/libm/curren
t/src/double/portable-api/
-mcpu=arm7tdmi -Wall -Wpointer-arith -Wstrict-prototypes -Winline 
-Wundef -Woverloaded-virtual
-g -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -
fvtable-gc
-finit-priority -Wp,-MD,src/double/portable-api/s_modf.tmp -o
src/double/portable-api/language_c_libm_s_modf.o
//D/Programme/REDHAT~1/eCos/packages/language/c/libm/current
/src/double/portable-api/s_modf.c
make[1]: *** No rule to make target `src/double/portable-
api/s_tanh.c ', needed by
`libtarget.a.stamp'.  Stop. make[1]: Leaving directory
`/home/doc_build/language/c/libm/current' make: *** [build] Error 2

*** Process 175 terminated (rc=2)
--------------------------------------------------------------------------------
Can anybody help me?

Best Regards

Alexander Drzeniek

-
Ingenieurbuero Strahl * Aderdamm 46 * 40221 Duesseldorf
Telefon 0211-15755-0 * Fax 0211-15755-22
Alexander Drzeniek * Abt. Hardwareentwicklung
Telefon 0211-15755-12 * Fax 0211-15755-20

Re: [ECOS] Problems with eCos Configuration Tool

[Jonathan Larmour]

Alexander Drzeniek wrote:
> 
> Hello All,
> i got some problems with eCos configuration tool 1.3.1.1, working
> on Win NT or Win2000, using Cygwin 2.24 , HAL for the Atmel
> EB01 from Carl van Schaik. If i do some changes at the
> Configuration

You mean it worked before these changes? If so, what changes?

> and start the build-process, config-tool stops and
> shows this error:
> > make[1]: *** No rule to make target `src/double/portable-
> api/s_tanh.c ', needed by
> `libtarget.a.stamp'.  Stop. make[1]: Leaving directory

Does the s_tanh.c file exist in
language/c/libm/current/src/double/portable-api ? It should.

Jifl
-- 
Red Hat, 35 Cambridge Place, Cambridge, UK. CB2 1NS  Tel: +44 (1223) 728762
"Plan to be spontaneous tomorrow."  ||  These opinions are all my own fault