[ECOS] Assabet REDBOOT Document

[ECOS] Assabet REDBOOT Document

[Jason Lin]

Hi! All,

I'm working on a SA1110 based H/W platform and like to port ecos to it.  Since
it is using the same CPU as the Assabet, it will be nature to use the
Assabet's port as the reference.  However, I couldn't find any document
describing how to bring up the REDBOOT for the assabet.  From graphic
confiuration tool, I couldn't find the Assabet template as well.  Any advise? 
Thanks in advance.

Jason Lin

____________________________________________________________________
Get free email and a permanent address at http://www.netaddress.com/?N=1

Re: [ECOS] Assabet REDBOOT Document

[Jonathan Larmour]

Jason Lin wrote:
> 
> Hi! All,
> 
> I'm working on a SA1110 based H/W platform and like to port ecos to it.  Since
> it is using the same CPU as the Assabet, it will be nature to use the
> Assabet's port as the reference.  However, I couldn't find any document
> describing how to bring up the REDBOOT for the assabet.  From graphic
> confiuration tool, I couldn't find the Assabet template as well.  Any advise?

Perhaps you are using the eCos 1.3.1 release? RedBoot and Assabet support
are both only in anonymous CVS. Once you have an anonymous CVS repository
selected in the configuration tool (using Build->Repository) you can then
choose the Assabet target and redboot template from Build->Templates and
then import the redboot_ROM.cfg file from
hal/arm/sa11x0/assabet/current/misc using File->Import minimal
configuration.

Jifl
-- 
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine