public inbox for ecos-discuss@sourceware.org
 help / color / mirror / Atom feed
* [ECOS] Re: Question for arm-elf-gdb debugger
       [not found] <002701c0b6c7$b3671bc0$2372fd8a@dikhuit>
@ 2001-03-27  6:17 ` Jonathan Larmour
  2001-03-27  6:37   ` Lewin A.R.W. Edwards
  0 siblings, 1 reply; 2+ messages in thread
From: Jonathan Larmour @ 2001-03-27  6:17 UTC (permalink / raw)
  To: eCos discussion

Forwarded to ecos-discuss...

> Huang Qiang wrote:
> 
> 
> I have compiled the program and tried to download it with the
> arm-elf-gdb, ( ARM Angel has been selected as the connection mode) after
> I download and run the program, The program is running without problem
> but the Insight Debugger is halted forever and I should stop by using the
> Task manager to terminate it. So I can not do any debugging when using
> Insight. What's wrong?
> 
> If I am using Insight Debugger what should I do with the eCos GDB stub?
> what's is it used for?
> 
> Thanks a lot!
> 
> 
> 
> 
> James
> Huang Qiang
> Department of Electrical Engineering and Electronics
> University of Liverpool
> Brownlow Hill
> Liverpool  L69 3GJ
> UK
> 

-- 
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [ECOS] Re: Question for arm-elf-gdb debugger
  2001-03-27  6:17 ` [ECOS] Re: Question for arm-elf-gdb debugger Jonathan Larmour
@ 2001-03-27  6:37   ` Lewin A.R.W. Edwards
  0 siblings, 0 replies; 2+ messages in thread
From: Lewin A.R.W. Edwards @ 2001-03-27  6:37 UTC (permalink / raw)
  To: eCos discussion

> > I have compiled the program and tried to download it with the
> > arm-elf-gdb, ( ARM Angel has been selected as the connection mode) after
> > I download and run the program, The program is running without problem

If you are using Insight 5.0 then please update to a CVS snapshot. 5.0 has 
known instabilities running with Angel. Or you can update your embedded 
system with GDB stubs/RedBoot instead.

If neither of these are possible then ensure that you are running your 
serial connection at 9600 and use console-mode gdb, gdb -nw (this is the 
most stable it's going to get, but it's still very fragile).

> > If I am using Insight Debugger what should I do with the eCos GDB stub?
> > what's is it used for?

The GDB stub is the embedded-system-side back-end that Insight talks to. At 
the moment you are using Angel as your back-end.

=== Lewin A.R.W. Edwards (Embedded Engineer)
Work: http://www.digi-frame.com/
Personal: http://www.zws.com/ and http://www.larwe.com/

"Und setzet ihr nicht das Leben ein,
Nie wird euch das Leben gewonnen sein."

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2001-03-27  6:37 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <002701c0b6c7$b3671bc0$2372fd8a@dikhuit>
2001-03-27  6:17 ` [ECOS] Re: Question for arm-elf-gdb debugger Jonathan Larmour
2001-03-27  6:37   ` Lewin A.R.W. Edwards

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).