* [ECOS] Porting eCos on STM32F4
@ 2012-03-14 9:42 medamineblidi
2012-03-14 14:20 ` Ilija Kocho
0 siblings, 1 reply; 2+ messages in thread
From: medamineblidi @ 2012-03-14 9:42 UTC (permalink / raw)
To: ecos-discuss
Hi all,
if i can found some informations for porting eCos on STM32F4 cortex M4,
i nead your help:
* The gnutools updates and his compatibility with cortex M4
* If some one has done porting on STM32F4
great regards.
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [ECOS] Porting eCos on STM32F4
2012-03-14 9:42 [ECOS] Porting eCos on STM32F4 medamineblidi
@ 2012-03-14 14:20 ` Ilija Kocho
0 siblings, 0 replies; 2+ messages in thread
From: Ilija Kocho @ 2012-03-14 14:20 UTC (permalink / raw)
To: medamineblidi; +Cc: ecos-discuss
On 14.03.2012 10:42, medamineblidi wrote:
> Hi all,
>
> if i can found some informations for porting eCos on STM32F4 cortex
> M4, i nead your help:
>
> * The gnutools updates and his compatibility with cortex M4
Current standard eCos gnutools 4.3.2 are compatible with Cortex-M4
provided that you are happy with Cortex-M3 instruction set.
If you want to fully utilize Cortex-M4 potential with SIMD (aka DSP) and
Floating point there is a test release od GCC 4.6.2 Instructions for
download and installation you will find here:
http://sourceware.org/ml/ecos-discuss/2012-02/msg00015.html
Note: This is a test release and may be replaced by a new (test) release
in a short term. Should this happen it will be announced in this mailing
list.
I hope this helps.
Ilija
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-03-14 14:20 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-03-14 9:42 [ECOS] Porting eCos on STM32F4 medamineblidi
2012-03-14 14:20 ` Ilija Kocho
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).