* [ECOS] insight hangs
@ 2012-06-30 7:14 abhishek srivastava
2012-06-30 9:34 ` Ilija Kocho
2012-06-30 23:15 ` Jonathan Larmour
0 siblings, 2 replies; 3+ messages in thread
From: abhishek srivastava @ 2012-06-30 7:14 UTC (permalink / raw)
To: ecos discuss
hi
i resolved my previous issue.
i was using wrong path.
now,while using Insight GUI,when i select basic1.exe file in File-->open. set the target setting as 'remote/serial', baud rate 38400 and port as /dev/pts/3'
my Insight hangs indefinetely.......why so?
Abhishek
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [ECOS] insight hangs
2012-06-30 7:14 [ECOS] insight hangs abhishek srivastava
@ 2012-06-30 9:34 ` Ilija Kocho
2012-06-30 23:15 ` Jonathan Larmour
1 sibling, 0 replies; 3+ messages in thread
From: Ilija Kocho @ 2012-06-30 9:34 UTC (permalink / raw)
To: abhishek srivastava; +Cc: ecos discuss
abhishek
With all respect, but is this the right mailing list for such question?
Ilija
On 30.06.2012 09:13, abhishek srivastava wrote:
> hi
> i resolved my previous issue.
> i was using wrong path.
> now,while using Insight GUI,when i select basic1.exe file in File-->open. set the target setting as 'remote/serial', baud rate 38400 and port as /dev/pts/3'
> my Insight hangs indefinetely.......why so?
>
>
>
>
> Abhishek
>
>
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [ECOS] insight hangs
2012-06-30 7:14 [ECOS] insight hangs abhishek srivastava
2012-06-30 9:34 ` Ilija Kocho
@ 2012-06-30 23:15 ` Jonathan Larmour
1 sibling, 0 replies; 3+ messages in thread
From: Jonathan Larmour @ 2012-06-30 23:15 UTC (permalink / raw)
To: abhishek srivastava; +Cc: ecos discuss
On 30/06/12 08:13, abhishek srivastava wrote:
> while using Insight GUI,
I believe development on Insight has ceased.
> when i select basic1.exe file in File-->open. set the target
> setting as 'remote/serial', baud rate 38400 and port as /dev/pts/3' my
> Insight hangs indefinetely.......why so?
You need to reference a serial port, not your local terminal. e.g. /dev/ttyS0
or /dev/ttyUSB0. Depends how your target is connected.
Jifl
--
eCosCentric Limited http://www.eCosCentric.com/ The eCos experts
Barnwell House, Barnwell Drive, Cambridge, UK. Tel: +44 1223 245571
Registered in England and Wales: Reg No 4422071.
------["Si fractum non sit, noli id reficere"]------ Opinions==mine
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-06-30 23:15 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-06-30 7:14 [ECOS] insight hangs abhishek srivastava
2012-06-30 9:34 ` Ilija Kocho
2012-06-30 23:15 ` Jonathan Larmour
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).