* [ECOS] VIA RHINE Ethernet + LWIP not working
@ 2005-07-28 11:11 Sriramkumar Raju
0 siblings, 0 replies; only message in thread
From: Sriramkumar Raju @ 2005-07-28 11:11 UTC (permalink / raw)
To: ecos-discuss
Hi,
I have ported the VIA Rhine II driver written for Hitachi HS7729PCI
platform to I386 platform.
A) I can boot the eCOS + Open BSD stack on I386 platform with network
interface ( VIA Rhine II )up and running.
B) When I use a Light Weight IP + eCOS the VIA Rhine driver hangs the
system while initializing the VIA Rhine Controller.
More precisely while executing the following IO write in
pci_init_find_rhines function.
HAL_PCI_IO_WRITE_UINT8(cpd->base+RHINE_CR1, RHINE_CR1_SRST);
C) When I tried LWIP in I386 platform with RTL 8139 the system boots
and LWIP works fine with RTL driver.
help me to figure out what might be the problem.
Thanks.
Regards,
Sriram.R
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-07-28 11:11 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-07-28 11:11 [ECOS] VIA RHINE Ethernet + LWIP not working Sriramkumar Raju
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).