* [ECOS] How to Enable USB Slave
@ 2007-09-26 6:51 Vivek-Kumar Gupta
2007-09-28 4:00 ` [ECOS] Philips ISP 1581 Source Code Vivek-Kumar Gupta
0 siblings, 1 reply; 3+ messages in thread
From: Vivek-Kumar Gupta @ 2007-09-26 6:51 UTC (permalink / raw)
To: ecos-discuss
I want to enable USB in Redboot. Which is similar to ecos. So writing this email.
I have read http://ecos.sourceware.org/docs-latest/ref/usbs-intro.html
Here it is mentioned that "Easiest way to do this is to enable the configuration option CYGGLO_IO_USB_SLAVE_APPLICATION,
and the USB device driver and related packages will adjust accordingly"
But I don't know where to modify this.?
I have tried modifying build/ecos/packages/hal/arm/arm9/edb93xx/current/misc/redboot_ROMRAM.ecm
Add
package -hardware CYGPKG_DEVS_USB_D12 current ;
package CYGPKG_IO_USB current ;
package CYGPKG_IO_USB_SLAVE current ;
package CYGPKG_IO_USB_SLAVE_ETH current ;
but this is giving me errors :
*************
C CYGPKG_DEVS_USB_D12, "requires" constraint not satisfied: CYGIMP_DEVS_USB_D12_HW_ACCESS_HEADER
Unable to generate build tree, this configuration still contains conflicts.
Either resolve the conflicts or use --ignore-errors
make[1]: Entering directory `/newhome/vivek/linux-crater_1-0-3Redboot/build/ecos/build'
********************
I have checked CYGIMP_DEVS_USB_D12_HW_ACCESS_HEADER in ecos.ecc,
there is cdl_options for this, but did not understand why compilation is giving error (basically in ecosconfig tree) ?
do i have to check some header file implementing D12 registers ?
What should I do to resolve this. Any pointers...will help a lot.
Thanks in advance.
Regards,
Vivek :-
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 3+ messages in thread
* [ECOS] Philips ISP 1581 Source Code
2007-09-26 6:51 [ECOS] How to Enable USB Slave Vivek-Kumar Gupta
@ 2007-09-28 4:00 ` Vivek-Kumar Gupta
2007-09-28 5:36 ` Vivek-Kumar Gupta
0 siblings, 1 reply; 3+ messages in thread
From: Vivek-Kumar Gupta @ 2007-09-28 4:00 UTC (permalink / raw)
To: ecos-discuss
I am using Redboot as boot loader for my ARM based board.
Using Philips ISP 1581 Device Controller Chip.
Can I get Source Code for this chip in Redboot?
If any one has any pointers please help me.
Thanks in advance.
Regards,
Vivek:-
-----Original Message-----
From: ecos-discuss-owner@ecos.sourceware.org [mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of Vivek-Kumar Gupta
Sent: Wednesday, September 26, 2007 12:22 PM
To: ecos-discuss@ecos.sourceware.org
Subject: [ECOS] How to Enable USB Slave
I want to enable USB in Redboot. Which is similar to ecos. So writing this email.
I have read http://ecos.sourceware.org/docs-latest/ref/usbs-intro.html
Here it is mentioned that "Easiest way to do this is to enable the configuration option CYGGLO_IO_USB_SLAVE_APPLICATION,
and the USB device driver and related packages will adjust accordingly"
But I don't know where to modify this.?
I have tried modifying build/ecos/packages/hal/arm/arm9/edb93xx/current/misc/redboot_ROMRAM.ecm
Add
package -hardware CYGPKG_DEVS_USB_D12 current ;
package CYGPKG_IO_USB current ;
package CYGPKG_IO_USB_SLAVE current ;
package CYGPKG_IO_USB_SLAVE_ETH current ;
but this is giving me errors :
*************
C CYGPKG_DEVS_USB_D12, "requires" constraint not satisfied: CYGIMP_DEVS_USB_D12_HW_ACCESS_HEADER
Unable to generate build tree, this configuration still contains conflicts.
Either resolve the conflicts or use --ignore-errors
make[1]: Entering directory `/newhome/vivek/linux-crater_1-0-3Redboot/build/ecos/build'
********************
I have checked CYGIMP_DEVS_USB_D12_HW_ACCESS_HEADER in ecos.ecc,
there is cdl_options for this, but did not understand why compilation is giving error (basically in ecosconfig tree) ?
do i have to check some header file implementing D12 registers ?
What should I do to resolve this. Any pointers...will help a lot.
Thanks in advance.
Regards,
Vivek :-
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: [ECOS] Philips ISP 1581 Source Code
2007-09-28 4:00 ` [ECOS] Philips ISP 1581 Source Code Vivek-Kumar Gupta
@ 2007-09-28 5:36 ` Vivek-Kumar Gupta
0 siblings, 0 replies; 3+ messages in thread
From: Vivek-Kumar Gupta @ 2007-09-28 5:36 UTC (permalink / raw)
To: ecos-discuss
This is USB Device Controller Chip : Philips ISP 1581
Regards,
Vivek :-
-----Original Message-----
From: ecos-discuss-owner@ecos.sourceware.org [mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of Vivek-Kumar Gupta
Sent: Friday, September 28, 2007 9:31 AM
To: ecos-discuss@ecos.sourceware.org
Subject: [ECOS] Philips ISP 1581 Source Code
I am using Redboot as boot loader for my ARM based board.
Using Philips ISP 1581 Device Controller Chip.
Can I get Source Code for this chip in Redboot?
If any one has any pointers please help me.
Thanks in advance.
Regards,
Vivek:-
-----Original Message-----
From: ecos-discuss-owner@ecos.sourceware.org [mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of Vivek-Kumar Gupta
Sent: Wednesday, September 26, 2007 12:22 PM
To: ecos-discuss@ecos.sourceware.org
Subject: [ECOS] How to Enable USB Slave
I want to enable USB in Redboot. Which is similar to ecos. So writing this email.
I have read http://ecos.sourceware.org/docs-latest/ref/usbs-intro.html
Here it is mentioned that "Easiest way to do this is to enable the configuration option CYGGLO_IO_USB_SLAVE_APPLICATION,
and the USB device driver and related packages will adjust accordingly"
But I don't know where to modify this.?
I have tried modifying build/ecos/packages/hal/arm/arm9/edb93xx/current/misc/redboot_ROMRAM.ecm
Add
package -hardware CYGPKG_DEVS_USB_D12 current ;
package CYGPKG_IO_USB current ;
package CYGPKG_IO_USB_SLAVE current ;
package CYGPKG_IO_USB_SLAVE_ETH current ;
but this is giving me errors :
*************
C CYGPKG_DEVS_USB_D12, "requires" constraint not satisfied: CYGIMP_DEVS_USB_D12_HW_ACCESS_HEADER
Unable to generate build tree, this configuration still contains conflicts.
Either resolve the conflicts or use --ignore-errors
make[1]: Entering directory `/newhome/vivek/linux-crater_1-0-3Redboot/build/ecos/build'
********************
I have checked CYGIMP_DEVS_USB_D12_HW_ACCESS_HEADER in ecos.ecc,
there is cdl_options for this, but did not understand why compilation is giving error (basically in ecosconfig tree) ?
do i have to check some header file implementing D12 registers ?
What should I do to resolve this. Any pointers...will help a lot.
Thanks in advance.
Regards,
Vivek :-
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2007-09-28 5:36 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-09-26 6:51 [ECOS] How to Enable USB Slave Vivek-Kumar Gupta
2007-09-28 4:00 ` [ECOS] Philips ISP 1581 Source Code Vivek-Kumar Gupta
2007-09-28 5:36 ` Vivek-Kumar Gupta
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).