* [ECOS] RE: Redboot out of sdram for MPC8280
@ 2005-09-13 8:22 Harsha D
0 siblings, 0 replies; only message in thread
From: Harsha D @ 2005-09-13 8:22 UTC (permalink / raw)
To: oren, ecos-discuss
>change Redboot to link at address 0x800000 instead?
Do the change in your corresponding *_ram.ldi script file...and rebuild redboot
-----Original Message-----
From: Oren Laskin [mailto:laskin@gmail.com]
Sent: Tuesday, September 13, 2005 2:40 AM
To: ecos-discuss@ecos.sourceware.org
Subject: Redboot out of sdram for MPC8280
I have a custom MPC8280 board that is set up very similar to the A&M
Rattler 8280 board that currently runs Redboot. The MPC8280 custom
board has its own bootloader that I can use to load programs to sdram
at a higher address. I can't load the Redboot RAM(built for the
Rattler) to 0x40000 where the elf is linked to using the bootloader,
but I can load it to 0x800000. How do I change Redboot to link at
address 0x800000 instead?
Also is it possible to test ROM+RAM builds out of sdram only before
programming flash?
Thanks,
Oren
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-09-13 8:22 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-09-13 8:22 [ECOS] RE: Redboot out of sdram for MPC8280 Harsha D
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).