[ECOS] build brutus redboot error

[ECOS] build brutus redboot error

[Jun Wu]

Hi ecos experts,
I use configuration tool(winnt/1.3.1.2) to set following configurations
    Hardware: Intel StrongARM SA1100 board
    Packages: redboot
(ecos cvs repository from ftp://ftp.skynet.ie/cvs/ecos-001129.tar.gz )

Then I build the target, but error occurs,
...
arm-elf-gcc -mcpu=strongarm1100 -Wall -Wpointer-arith -Wstrict-prototypes -W
inline -Wundef -Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sectio
ns -fno-rtti -fno-exceptions -fvtable-gc -finit-priority  -I//C/ecosconfig/b
rutus_install/include -I//C/PROGRA~1/REDHAT~1/eCos/packages/hal/arm/arch/cur
rent -I//C/PROGRA~1/REDHAT~1/eCos/packages/hal/arm/arch/current/src -I//C/PR
OGRA~1/REDHAT~1/eCos/packages/hal/arm/arch/current/tests -I. -Wp,-MD,arm.tmp
 -o hal_mk_defs.tmp -S
file://C/PROGRA~1/REDHAT~1/eCos/packages/hal/arm/arch/current/src/hal_mk_def
s.c
cpp: too many input files
make[1]: *** [arm.inc] Error 1
make[1]: Leaving directory `/ecosconfig/brutus_build/hal/arm/arch/current'
make: *** [build] Error 2

How can I resolve this problem?

Many thanks

Jun Wu

Re: [ECOS] build brutus redboot error

[Dave Airlie]

Hi,
	I've seen this myself 

if your tools are in c:\tools

do

mount //c/tools /tools

I think this solved it for me..

Dave.

On Wed, 29 Nov 2000, Jun Wu wrote:

> Hi ecos experts,
> I use configuration tool(winnt/1.3.1.2) to set following configurations
>     Hardware: Intel StrongARM SA1100 board
>     Packages: redboot
> (ecos cvs repository from ftp://ftp.skynet.ie/cvs/ecos-001129.tar.gz )
> 
> Then I build the target, but error occurs,
> ...
> arm-elf-gcc -mcpu=strongarm1100 -Wall -Wpointer-arith -Wstrict-prototypes -W
> inline -Wundef -Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sectio
> ns -fno-rtti -fno-exceptions -fvtable-gc -finit-priority  -I//C/ecosconfig/b
> rutus_install/include -I//C/PROGRA~1/REDHAT~1/eCos/packages/hal/arm/arch/cur
> rent -I//C/PROGRA~1/REDHAT~1/eCos/packages/hal/arm/arch/current/src -I//C/PR
> OGRA~1/REDHAT~1/eCos/packages/hal/arm/arch/current/tests -I. -Wp,-MD,arm.tmp
>  -o hal_mk_defs.tmp -S
> file://C/PROGRA~1/REDHAT~1/eCos/packages/hal/arm/arch/current/src/hal_mk_def
> s.c
> cpp: too many input files
> make[1]: *** [arm.inc] Error 1
> make[1]: Leaving directory `/ecosconfig/brutus_build/hal/arm/arch/current'
> make: *** [build] Error 2
> 
> How can I resolve this problem?
> 
> Many thanks
> 
> Jun Wu
> 
> 
> 

-- 
      David Airlie, Software Engineer, Parthus Technologies plc.,
       Mary Rosse Centre, National Tech Park, Limerick, Ireland.
   t: +353-61-508116 / f: +353-61-508101 / David.Airlie@parthus.com