* ECOS Hitachi SH port
@ 1998-11-19 14:12 Aaron Passey
[not found] ` < 199811192212.OAA09240@hermes.gordian.com >
0 siblings, 1 reply; 3+ messages in thread
From: Aaron Passey @ 1998-11-19 14:12 UTC (permalink / raw)
To: ecos-discuss
Has Cygnus or anyone else started writing a Hitachi SH port of
eCos? For the past few days, I have been looking at eCos to run on a board
that I designed that has a Hitachi sh7032 processor on it. I was planning
to use rtems but it seems that eCos is much simpler and better documented
so I thought I would try it instead. If noboby is doing a port, I'll be
glad to do it but I have been pretty busy in my real job so I may not
finish it all that quickly.
BTW, I am impressed by the eCos archetecture. It seems to be very
easy to port to other processors and platforms. I hope it takes off and
becomes very popular.
Aaron
^ permalink raw reply [flat|nested] 3+ messages in thread
* [ECOS] Re: ECOS Hitachi SH port
[not found] ` < 199811192212.OAA09240@hermes.gordian.com >
@ 1998-11-20 11:38 ` Stephan Austermuehle
1998-11-20 15:38 ` [ECOS] " Mark Clayton
1 sibling, 0 replies; 3+ messages in thread
From: Stephan Austermuehle @ 1998-11-20 11:38 UTC (permalink / raw)
To: ecos-discuss
Hello,
On Thu, 19 Nov 1998, Aaron Passey wrote:
> so I thought I would try it instead. If noboby is doing a port, I'll be
> glad to do it but I have been pretty busy in my real job so I may not
> finish it all that quickly.
I am planning to port eCos to the Hitachi SH architecture but I haven't
started yet. My problem is my lack of time...
Stephan
^ permalink raw reply [flat|nested] 3+ messages in thread
* [ECOS] RE: ECOS Hitachi SH port
[not found] ` < 199811192212.OAA09240@hermes.gordian.com >
1998-11-20 11:38 ` [ECOS] " Stephan Austermuehle
@ 1998-11-20 15:38 ` Mark Clayton
1 sibling, 0 replies; 3+ messages in thread
From: Mark Clayton @ 1998-11-20 15:38 UTC (permalink / raw)
To: Aaron Passey; +Cc: ecos-discuss
I'd like to volunteer some time to this. I can't commit to a whole
lot of time, but I'd like to help out where I can. I too was going
to try rtems, but I like eCos better. I have an SH-2 eval board I
want to experiment with. Doing this port should be educational.
Regards,
Mark Clayton
On 19-Nov-98 Aaron Passey wrote:
>
> Has Cygnus or anyone else started writing a Hitachi SH port of
> eCos? For the past few days, I have been looking at eCos to run on a
> board
> that I designed that has a Hitachi sh7032 processor on it. I was
> planning
> to use rtems but it seems that eCos is much simpler and better
> documented
> so I thought I would try it instead. If noboby is doing a port, I'll be
> glad to do it but I have been pretty busy in my real job so I may not
> finish it all that quickly.
>
> BTW, I am impressed by the eCos archetecture. It seems to be very
> easy to port to other processors and platforms. I hope it takes off and
> becomes very popular.
>
> Aaron
----------------------------------
E-Mail: Mark Clayton <clayton@shore.net>
Date: 20-Nov-98
Time: 18:41:17
----------------------------------
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~1998-11-20 15:38 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
1998-11-19 14:12 ECOS Hitachi SH port Aaron Passey
[not found] ` < 199811192212.OAA09240@hermes.gordian.com >
1998-11-20 11:38 ` [ECOS] " Stephan Austermuehle
1998-11-20 15:38 ` [ECOS] " Mark Clayton
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).