* [ECOS] I have modified GRG(IXP425 based) for wrv54g(IXP425). Not communicating with network
@ 2008-03-06 17:29 Ajit Mittal
0 siblings, 0 replies; only message in thread
From: Ajit Mittal @ 2008-03-06 17:29 UTC (permalink / raw)
To: Stefan Sommerfeld; +Cc: ecos-discuss
I have downloaded the redboot sources for IXP425 based router and use
the grg board as base.
For porting to my board(linksys wrv54g) I have only modified the Flash
size and the RAM size.
I am getting redboot prompt.
Also gets this while booting which shows that eth port is fine.
Trying NPE-B...success. Using NPE-B with PHY 1
But it is not communicating with the network. How to troubleshoot?
Thanks
Ajit
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2008-03-06 17:29 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-03-06 17:29 [ECOS] I have modified GRG(IXP425 based) for wrv54g(IXP425). Not communicating with network Ajit Mittal
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).