[ECOS] building arm ROM without GDB stubs

[ECOS] building arm ROM without GDB stubs

[Dave Airlie]

Using Cygwin / Windows Configtool I can genearate an .ecc file with no
conflicts but when I compile I get:

rm-elf-gcc -c  -I//D/ecos/fj1_install/include
-I//R/devel/ecos-010112/packages/hal/common/current
-I//R/devel/ecos-010112/packages/hal/common/current/src
-I//R/devel/ecos-010112/packages/hal/common/current/tests
-I. -I//R/devel/ecos-010112/packages/hal/common/current/src/
-mcpu=arm7tdmi -Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef
-Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sections -fno-rtti
-fno-exceptions -fvtable-gc -finit-priority -Wp,-MD,src/hal_if.tmp -o
src/hal_common_hal_if.o
//R/devel/ecos-010112/packages/hal/common/current/src/hal_if.c
//R/devel/ecos-010112/packages/hal/common/current/src/hal_if.c:142: #error
" no RESET_ENTRY"
make[1]: *** [src/hal_if.o.d] Error 1
make[1]: Leaving directory `/d/ecos/fj1_build/hal/common/current'
make: *** [build] Error 2

If I add GDB stubs in HAL to my ROM image I can build a library
successfully, I am sure I've done this before has something changed?

I'm using snapshot from 12 January...

Dave.

-- 
      David Airlie, Software Engineer, Parthus Technologies plc.,
       Mary Rosse Centre, National Tech Park, Limerick, Ireland.
   t: +353-61-508116 / f: +353-61-508101 / David.Airlie@parthus.com

Re: [ECOS] building arm ROM without GDB stubs

[Jesper Skov]

>>>>> "Dave" == Dave Airlie <airlied@parthus.com> writes:

Dave> #error " no RESET_ENTRY" make[1]: *** [src/hal_if.o.d] Error 1
Dave> make[1]: Leaving directory
Dave> `/d/ecos/fj1_build/hal/common/current' make: *** [build] Error 2

You don't say which platform. But look in the plf_stub.h header file
in the platform HAL - the reset macros are at the end. Move them below
the #ifdef INCLUDE_STUBS  conditional compilation.

Jesper

Re: [ECOS] building arm ROM without GDB stubs

[Dave Airlie]

sorry .. ARM7 PID ...

Dave.

On 15 Jan 2001, Jesper Skov wrote:

> >>>>> "Dave" == Dave Airlie <airlied@parthus.com> writes:
> 
> Dave> #error " no RESET_ENTRY" make[1]: *** [src/hal_if.o.d] Error 1
> Dave> make[1]: Leaving directory
> Dave> `/d/ecos/fj1_build/hal/common/current' make: *** [build] Error 2
> 
> You don't say which platform. But look in the plf_stub.h header file
> in the platform HAL - the reset macros are at the end. Move them below
> the #ifdef INCLUDE_STUBS  conditional compilation.
> 
> Jesper
> 

-- 
      David Airlie, Software Engineer, Parthus Technologies plc.,
       Mary Rosse Centre, National Tech Park, Limerick, Ireland.
   t: +353-61-508116 / f: +353-61-508101 / David.Airlie@parthus.com

Re: [ECOS] building arm ROM without GDB stubs

[Jesper Skov]

>>>>> "Dave" == Dave Airlie <airlied@parthus.com> writes:

Dave> sorry .. ARM7 PID ...

>>  You don't say which platform. But look in the plf_stub.h header
>> file in the platform HAL - the reset macros are at the end. Move
>> them below the #ifdef INCLUDE_STUBS conditional compilation.

Hm, they already are on the PID - at least in the CVS repo.

OK, I met the same problem, and my solution was the below - not very
nice, but isn't too messy. The real fix is to move the RESET macros
to a different header file.

In hal_stub.h, move this:

#ifdef CYGBLD_HAL_PLATFORM_STUB_H
#include CYGBLD_HAL_PLATFORM_STUB_H
#else
#include <cyg/hal/plf_stub.h>
#endif


above the #ifdef CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS check.


Jesper