[ECOS] Conflict Problem while configuring eCOS

[ECOS] Conflict Problem while configuring eCOS

[HuangQiang]

Hi all:


I am trying to build eCOS configuration with TCP/IP support for ARME7T.  I
encountered 1 unresolved conflict.

Template: ARME7T
Type: default
package added:  common ethernet support, networking.

when I try to save the configuration the conflict comes out:

****************************************************************************
********************************************************
Item                                Conflict                Property
CYGPKG_NET              Unsatisfied           Requires
CYGBLD_ISO_BSDTYPES_HEADER ==" <sys/bsdtypts.h>"

Proposed solution:

Item                                                                 Value
CYGBLD_ISO_BSDTYPES_HEADER          Enabled, <sys/bsdtypes.h>
****************************************************************************
********************************************************
then I click continue to solve the problem and try to save the
configuration. but I still be told there is one conflict and do I want to
save anyway?  And during building process lots of error will occur. Can't
the conflict be resolved automatically by the eCOS configuration tools? Or I
should resolve the problem by myself?

Thanks a lot!



Mr Huang Qiang
Postgraduate Student
Room318 B-Block
Department Of Electrical Engineering And Electronics
University Of Liverpool
Brownlow Hill
Liverpool L69,3GJ
UK

Personal website at: http://www.liv.ac.uk/~jameshq

Re: [ECOS] Conflict Problem while configuring eCOS

[Julian Smart]

Hi,

There was a problem with the original Configtool whereby constraints weren't always satisfied properly; please try either the updated config tool v2 at:

ftp://sources.redhat.com/pub/ecos/ct2/configtool-2.08-setup.exe

or this zipfile containing an updated config tool v1 and ecosconfig CLUI binaries here:

ftp://sources.redhat.com/pub/ecos/anoncvs/ct-update-011025.zip

Please install the latter over your existing Configtool v1 files.

Regards,

Julian

At 11:58 AM 11/12/01 +0000, HuangQiang wrote:
 >Hi all:
 >
 >
 >I am trying to build eCOS configuration with TCP/IP support for ARME7T.  I
 >encountered 1 unresolved conflict.
 >
 >Template: ARME7T
 >Type: default
 >package added:  common ethernet support, networking.
 >
 >when I try to save the configuration the conflict comes out:
 >
 >****************************************************************************
 >********************************************************
 >Item                                Conflict                Property
 >CYGPKG_NET              Unsatisfied           Requires
 >CYGBLD_ISO_BSDTYPES_HEADER ==" <sys/bsdtypts.h>"
 >
 >Proposed solution:
 >
 >Item                                                                 Value
 >CYGBLD_ISO_BSDTYPES_HEADER          Enabled, <sys/bsdtypes.h>
 >****************************************************************************
 >********************************************************
 >then I click continue to solve the problem and try to save the
 >configuration. but I still be told there is one conflict and do I want to
 >save anyway?  And during building process lots of error will occur. Can't
 >the conflict be resolved automatically by the eCOS configuration tools? Or I
 >should resolve the problem by myself?
 >
 >Thanks a lot!
 >
 >
 >
 >Mr Huang Qiang
 >Postgraduate Student
 >Room318 B-Block
 >Department Of Electrical Engineering And Electronics
 >University Of Liverpool
 >Brownlow Hill
 >Liverpool L69,3GJ
 >UK
 >
 >Personal website at: http://www.liv.ac.uk/~jameshq

-- 
Red Hat UK Ltd, Unit 200 Rustat House, 62 Clifton Road, Cambridge, UK. CB1 7EG Tel: +44 (1223) 271063

Re: [ECOS] Conflict Problem while configuring eCOS

[Jesper Skov]

>>>>> "HuangQiang" == HuangQiang  <jameshq@liverpool.ac.uk> writes:

HuangQiang> Hi all: I am trying to build eCOS configuration with
HuangQiang> TCP/IP support for ARME7T.  I encountered 1 unresolved
HuangQiang> conflict.

HuangQiang> Template: ARME7T Type: default package added: common
HuangQiang> ethernet support, networking.

Start from the 'net' template instead.

Jesper