public inbox for ecos-maintainers@sourceware.org
 help / color / mirror / Atom feed
* Re: [ECOS] Problem with little-endian RedBoot for GRG board
       [not found] ` <20040901122752.E40B678C2E@deneb.localdomain>
@ 2004-09-01 13:14   ` Gary Thomas
  2004-09-01 13:41     ` Mark Salter
  0 siblings, 1 reply; 2+ messages in thread
From: Gary Thomas @ 2004-09-01 13:14 UTC (permalink / raw)
  To: Mark Salter; +Cc: eCos Maintainers

On Wed, 2004-09-01 at 06:27, Mark Salter wrote:
> >>>>> =?big5?B?V2lsbGlhbSBDaGVuICizr6n6rHUp?=  writes:
> 
> > Hi all,
> > 	I'm trying to run the little-endian RedBoot on GRG board.
> > I downloaded RedBoot 1.94 Pre-Built Binaries (includes NPE Ethernet support) from Intel, in that contains both big-endian and little-endian RedBoot binaries.
> > It runs successfully when i update the big-endian RedBoot binary to my GRG board, but it's fail to run when i update the little-endian binary.
> > I've tried to install the little-endian binary to GRG board by using flash programmer and updating from RedBoot and both case are failed.
> > If any one has experience about running little-endian RedBoot on GRG board ?
> 
> If it is not running at all, then I suspect that you are programming
> the flash with a reversed byte order image. The toolchain will produce
> a little-endian image for a little-endian RedBoot. However, the GRG
> (and IXDP425) require the image programmed into flash to be big-endian.
> So, you need to take the little-endian redboot.bin and swap the byte
> order of all the 32-bit words before programming into flash. Another
> problem I have seen is that a number of GRG boards use A-step cpu
> which does not fully support little-endian. In that case, everything
> works except the NPE support.
> 
> BTW, look for the GRG and IXDP425 little-endian support to be merged
> into CVS this week...

That's encouraging :-)  Have you any word on the Copyright transfer?

-- 
Gary Thomas <gary@mlbassoc.com>
MLB Associates

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [ECOS] Problem with little-endian RedBoot for GRG board
  2004-09-01 13:14   ` [ECOS] Problem with little-endian RedBoot for GRG board Gary Thomas
@ 2004-09-01 13:41     ` Mark Salter
  0 siblings, 0 replies; 2+ messages in thread
From: Mark Salter @ 2004-09-01 13:41 UTC (permalink / raw)
  To: gary; +Cc: ecos-maintainers

>>>>> Gary Thomas writes:

> On Wed, 2004-09-01 at 06:27, Mark Salter wrote:
>> BTW, look for the GRG and IXDP425 little-endian support to be merged
>> into CVS this week...

> That's encouraging :-)  Have you any word on the Copyright transfer?

Sorry, I'm out of the loop on that. I thought for sure it was going
to happen three months ago. Not sure what the holdup is.

--Mark



^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2004-09-01 13:41 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <19270553E4E629468D00357B1541AE67325402@earth.moxa.com.tw>
     [not found] ` <20040901122752.E40B678C2E@deneb.localdomain>
2004-09-01 13:14   ` [ECOS] Problem with little-endian RedBoot for GRG board Gary Thomas
2004-09-01 13:41     ` Mark Salter

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).