* hardware.html help!
@ 2006-02-19 21:48 Andrew Lunn
2006-02-19 22:16 ` Andrew Lunn
0 siblings, 1 reply; 5+ messages in thread
From: Andrew Lunn @ 2006-02-19 21:48 UTC (permalink / raw)
To: eCos Maintainers
Hi folks
Probably one for Jifl
I've broken the "Supported Hardware" page,
http://ecos.sourceware.org/hardware.html.
There is an obvious cut/paste error in board-tablerow.html
<td><!--#if expr="$platurl" --><a href="<!--#echo var="platurl" -->" target="_top"><!--#endif -->
<!--#echo var="plat" --><!--#if expr="$procurl" --></a><!--#endif --></td>
the procurl should be platurl. This is causing extra </a> tokens. I
"fixed" this error and committed the change and it all went pear
shaped. So i reversed the patch but it stayed pear shaped!
Any ideas what i have broken?
Why was i looking at this? For some reason the AT91JTST is being
listed three times when two of these should be the phycore and the
sam7s. I was trying to work out what caused this when i spotted the
problem above. If anybody can say what is causing this tripple entry
it would be great to know.
Thanks
Andrew
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: hardware.html help!
2006-02-19 21:48 hardware.html help! Andrew Lunn
@ 2006-02-19 22:16 ` Andrew Lunn
2006-02-20 1:23 ` Jonathan Larmour
0 siblings, 1 reply; 5+ messages in thread
From: Andrew Lunn @ 2006-02-19 22:16 UTC (permalink / raw)
To: Andrew Lunn; +Cc: eCos Maintainers
On Sun, Feb 19, 2006 at 10:48:41PM +0100, Andrew Lunn wrote:
> Hi folks
>
> Probably one for Jifl
>
> I've broken the "Supported Hardware" page,
> http://ecos.sourceware.org/hardware.html.
>
> There is an obvious cut/paste error in board-tablerow.html
>
> <td><!--#if expr="$platurl" --><a href="<!--#echo var="platurl" -->" target="_top"><!--#endif -->
> <!--#echo var="plat" --><!--#if expr="$procurl" --></a><!--#endif --></td>
>
> the procurl should be platurl. This is causing extra </a> tokens. I
> "fixed" this error and committed the change and it all went pear
> shaped. So i reversed the patch but it stayed pear shaped!
>
> Any ideas what i have broken?
I think this is to do with the execute bit having to be set for server
side includes to work. Could somebody with logon to the server take a
look at the permissions on the files.
Thanks
Andrew
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: hardware.html help!
2006-02-19 22:16 ` Andrew Lunn
@ 2006-02-20 1:23 ` Jonathan Larmour
2006-02-20 8:40 ` Andrew Lunn
0 siblings, 1 reply; 5+ messages in thread
From: Jonathan Larmour @ 2006-02-20 1:23 UTC (permalink / raw)
To: Andrew Lunn; +Cc: Andrew Lunn, eCos Maintainers
Andrew Lunn wrote:
> On Sun, Feb 19, 2006 at 10:48:41PM +0100, Andrew Lunn wrote:
>
>>Hi folks
>>
>>Probably one for Jifl
>>
>>I've broken the "Supported Hardware" page,
>>http://ecos.sourceware.org/hardware.html.
>>
>>There is an obvious cut/paste error in board-tablerow.html
>>
>> <td><!--#if expr="$platurl" --><a href="<!--#echo var="platurl" -->" target="_top"><!--#endif -->
>> <!--#echo var="plat" --><!--#if expr="$procurl" --></a><!--#endif --></td>
>>
>>the procurl should be platurl. This is causing extra </a> tokens. I
>>"fixed" this error and committed the change and it all went pear
>>shaped. So i reversed the patch but it stayed pear shaped!
>>
>>Any ideas what i have broken?
>
>
> I think this is to do with the execute bit having to be set for server
> side includes to work. Could somebody with logon to the server take a
> look at the permissions on the files.
Indeed that's what it was on a number of files, although there was a
little quoting mistake in boards/inc/at91phycore.html that I fixed too.
Unfortunately I believe you have to set the permissions correctly the
first time a file is "cvs add"ed, otherwise it can only be fixed with
local shell access to the CVS repository.
Anyway all sorted, hopefully quickly enough!
Jifl
--
eCosCentric http://www.eCosCentric.com/ The eCos and RedBoot experts
------["The best things in life aren't things."]------ Opinions==mine
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: hardware.html help!
2006-02-20 1:23 ` Jonathan Larmour
@ 2006-02-20 8:40 ` Andrew Lunn
2006-02-20 13:02 ` Jonathan Larmour
0 siblings, 1 reply; 5+ messages in thread
From: Andrew Lunn @ 2006-02-20 8:40 UTC (permalink / raw)
To: Jonathan Larmour; +Cc: Andrew Lunn, eCos Maintainers
> Unfortunately I believe you have to set the permissions correctly the
> first time a file is "cvs add"ed, otherwise it can only be fixed with
> local shell access to the CVS repository.
I don't think this can be correct. I just did a cvs commit to
board-tablerow.html and that broke it.
I have another change i would like to commit:
Index: boardtext.html
===================================================================
RCS file: /cvs/ecos/htdocs/boards/boardtext.html,v
retrieving revision 1.10
diff -u -r1.10 boardtext.html
--- boardtext.html 16 Jun 2004 00:26:29 -0000 1.10
+++ boardtext.html 20 Feb 2006 08:39:00 -0000
@@ -76,6 +76,9 @@
<!--#if expr="$watchdogsupport = 1" -->
<li>Watchdog
<!--#endif -->
+<!--#if expr="$spisupport = 1" -->
+<li>SPI
+<!--#endif -->
</ul>
</p>
<!--#else -->
Are you at your keyboard at the moment to fix it if this commit breaks
things?
Andrew
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2006-02-20 13:02 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-02-19 21:48 hardware.html help! Andrew Lunn
2006-02-19 22:16 ` Andrew Lunn
2006-02-20 1:23 ` Jonathan Larmour
2006-02-20 8:40 ` Andrew Lunn
2006-02-20 13:02 ` Jonathan Larmour
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).