From: Tobias Burnus <tobias@codesourcery.com>
To: Jakub Jelinek <jakub@redhat.com>, <gcc-patches@gcc.gnu.org>
Cc: fortran <fortran@gcc.gnu.org>
Subject: [Patch] OpenMP/Fortran: Add support for enter clause on declare target (was: [committed] openmp: Add support for enter clause on declare target)
Date: Fri, 27 May 2022 16:52:17 +0200 [thread overview]
Message-ID: <651ae4c2-9440-b8df-e8af-b14491d45937@codesourcery.com> (raw)
In-Reply-To: <YpCt2rJGuydcFlA4@tucnak>
[-- Attachment #1: Type: text/plain, Size: 976 bytes --]
This patch adds the Fortran support to the just-committed C/C++ support for the 'enter' clause.
The 'TO'/'ENTER' usage is first stored in a linked list – and
then as attribute to the symbol. I am not sure how to handle it best.
I did went for adding an ENTER_LIST but kept only using the single attribute.
Result: In one diagnostic, I use 'TO or ENTER clause' in the other,
I can properly use 'TO' or 'ENTER' clause.
This could be kept as is, but to save memory it would be possible
to drop the ENTER_LIST – or, to improve diagnostic, we could try harder
(e.g. by re-walking the list or by another gfc_attribute). Preferences?
If not, I would go for the attached middle way.
Tobias
-----------------
Siemens Electronic Design Automation GmbH; Anschrift: Arnulfstraße 201, 80634 München; Gesellschaft mit beschränkter Haftung; Geschäftsführer: Thomas Heurung, Frank Thürauf; Sitz der Gesellschaft: München; Registergericht München, HRB 106955
[-- Attachment #2: declare-target-enter-f90.diff --]
[-- Type: text/x-patch, Size: 15449 bytes --]
OpenMP/Fortran: Add support for enter clause on declare target
Fortran version to C/C++ commit r13-797-g0ccba4ed8571c18c7015413441e971
gcc/fortran/ChangeLog:
* dump-parse-tree.cc (show_omp_clauses): Handle OMP_LIST_ENTER.
* gfortran.h: Add OMP_LIST_ENTER.
* openmp.cc (enum omp_mask2, OMP_DECLARE_TARGET_CLAUSES): Add
OMP_CLAUSE_ENTER.
(gfc_match_omp_clauses, gfc_match_omp_declare_target,
resolve_omp_clauses): Handle 'enter' clause.
libgomp/ChangeLog:
* libgomp.texi (OpenMP 5.2): Mark 'enter' clause as supported.
* testsuite/libgomp.fortran/declare-target-1.f90: Extend to test
explicit 'to' and 'enter' clause.
* testsuite/libgomp.fortran/declare-target-2.f90: Update accordingly.
gcc/testsuite/ChangeLog:
* gfortran.dg/gomp/declare-target-2.f90: Add 'enter' clause test.
* gfortran.dg/gomp/declare-target-4.f90: Likewise.
gcc/fortran/dump-parse-tree.cc | 1 +
gcc/fortran/gfortran.h | 1 +
gcc/fortran/openmp.cc | 59 +++++++++++++++-------
.../gfortran.dg/gomp/declare-target-2.f90 | 18 +++++--
.../gfortran.dg/gomp/declare-target-4.f90 | 9 +++-
libgomp/libgomp.texi | 2 +-
.../testsuite/libgomp.fortran/declare-target-1.f90 | 4 +-
.../testsuite/libgomp.fortran/declare-target-2.f90 | 10 +++-
8 files changed, 76 insertions(+), 28 deletions(-)
diff --git a/gcc/fortran/dump-parse-tree.cc b/gcc/fortran/dump-parse-tree.cc
index 4e8986bd599..e3affb8bc48 100644
--- a/gcc/fortran/dump-parse-tree.cc
+++ b/gcc/fortran/dump-parse-tree.cc
@@ -1679,6 +1679,7 @@ show_omp_clauses (gfc_omp_clauses *omp_clauses)
case OMP_LIST_IN_REDUCTION: type = "IN_REDUCTION"; break;
case OMP_LIST_TASK_REDUCTION: type = "TASK_REDUCTION"; break;
case OMP_LIST_DEVICE_RESIDENT: type = "DEVICE_RESIDENT"; break;
+ case OMP_LIST_ENTER: type = "ENTER"; break;
case OMP_LIST_LINK: type = "LINK"; break;
case OMP_LIST_USE_DEVICE: type = "USE_DEVICE"; break;
case OMP_LIST_CACHE: type = "CACHE"; break;
diff --git a/gcc/fortran/gfortran.h b/gcc/fortran/gfortran.h
index 5d970bc1df0..0bac8657790 100644
--- a/gcc/fortran/gfortran.h
+++ b/gcc/fortran/gfortran.h
@@ -1395,6 +1395,7 @@ enum
OMP_LIST_NONTEMPORAL,
OMP_LIST_ALLOCATE,
OMP_LIST_HAS_DEVICE_ADDR,
+ OMP_LIST_ENTER,
OMP_LIST_NUM /* Must be the last. */
};
diff --git a/gcc/fortran/openmp.cc b/gcc/fortran/openmp.cc
index efa62b64f2b..66c30ebea51 100644
--- a/gcc/fortran/openmp.cc
+++ b/gcc/fortran/openmp.cc
@@ -986,6 +986,7 @@ enum omp_mask2
OMP_CLAUSE_ATTACH,
OMP_CLAUSE_NOHOST,
OMP_CLAUSE_HAS_DEVICE_ADDR, /* OpenMP 5.1 */
+ OMP_CLAUSE_ENTER, /* OpenMP 5.2 */
/* This must come last. */
OMP_MASK2_LAST
};
@@ -2101,6 +2102,16 @@ gfc_match_omp_clauses (gfc_omp_clauses **cp, const omp_mask mask,
continue;
}
break;
+ case 'e':
+ if ((mask & OMP_CLAUSE_ENTER))
+ {
+ m = gfc_match_omp_to_link ("enter (", &c->lists[OMP_LIST_ENTER]);
+ if (m == MATCH_ERROR)
+ goto error;
+ if (m == MATCH_YES)
+ continue;
+ }
+ break;
case 'f':
if ((mask & OMP_CLAUSE_FAIL)
&& (m = gfc_match_dupl_check (c->fail == OMP_MEMORDER_UNSET,
@@ -2921,8 +2932,12 @@ gfc_match_omp_clauses (gfc_omp_clauses **cp, const omp_mask mask,
continue;
if ((mask & OMP_CLAUSE_TO) && (mask & OMP_CLAUSE_LINK))
{
- if (gfc_match_omp_to_link ("to (", &c->lists[OMP_LIST_TO])
- == MATCH_YES)
+ /* Declare target: 'to' is an alias for 'enter';
+ 'to' is deprecated since 5.2. */
+ m = gfc_match_omp_to_link ("to (", &c->lists[OMP_LIST_TO]);
+ if (m == MATCH_ERROR)
+ goto error;
+ if (m == MATCH_YES)
continue;
}
else if ((mask & OMP_CLAUSE_TO)
@@ -3724,7 +3739,8 @@ cleanup:
#define OMP_ORDERED_CLAUSES \
(omp_mask (OMP_CLAUSE_THREADS) | OMP_CLAUSE_SIMD)
#define OMP_DECLARE_TARGET_CLAUSES \
- (omp_mask (OMP_CLAUSE_TO) | OMP_CLAUSE_LINK | OMP_CLAUSE_DEVICE_TYPE)
+ (omp_mask (OMP_CLAUSE_ENTER) | OMP_CLAUSE_LINK | OMP_CLAUSE_DEVICE_TYPE \
+ | OMP_CLAUSE_TO)
#define OMP_ATOMIC_CLAUSES \
(omp_mask (OMP_CLAUSE_ATOMIC) | OMP_CLAUSE_CAPTURE | OMP_CLAUSE_HINT \
| OMP_CLAUSE_MEMORDER | OMP_CLAUSE_COMPARE | OMP_CLAUSE_FAIL \
@@ -4530,7 +4546,7 @@ gfc_match_omp_declare_target (void)
{
c = gfc_get_omp_clauses ();
gfc_current_locus = old_loc;
- m = gfc_match_omp_to_link (" (", &c->lists[OMP_LIST_TO]);
+ m = gfc_match_omp_to_link (" (", &c->lists[OMP_LIST_ENTER]);
if (m != MATCH_YES)
goto syntax;
if (gfc_match_omp_eos () != MATCH_YES)
@@ -4544,16 +4560,20 @@ gfc_match_omp_declare_target (void)
gfc_buffer_error (false);
- for (list = OMP_LIST_TO; list != OMP_LIST_NUM;
- list = (list == OMP_LIST_TO ? OMP_LIST_LINK : OMP_LIST_NUM))
+ for (list = OMP_LIST_ENTER; list != OMP_LIST_NUM;
+ list = (list == OMP_LIST_ENTER
+ ? OMP_LIST_TO
+ : (list == OMP_LIST_TO ? OMP_LIST_LINK : OMP_LIST_NUM)))
for (n = c->lists[list]; n; n = n->next)
if (n->sym)
n->sym->mark = 0;
else if (n->u.common->head)
n->u.common->head->mark = 0;
- for (list = OMP_LIST_TO; list != OMP_LIST_NUM;
- list = (list == OMP_LIST_TO ? OMP_LIST_LINK : OMP_LIST_NUM))
+ for (list = OMP_LIST_ENTER; list != OMP_LIST_NUM;
+ list = (list == OMP_LIST_ENTER
+ ? OMP_LIST_TO
+ : (list == OMP_LIST_TO ? OMP_LIST_LINK : OMP_LIST_NUM)))
for (n = c->lists[list]; n; n = n->next)
if (n->sym)
{
@@ -4564,14 +4584,14 @@ gfc_match_omp_declare_target (void)
&& n->sym->attr.omp_declare_target_link
&& list != OMP_LIST_LINK)
gfc_error_now ("OMP DECLARE TARGET variable at %L previously "
- "mentioned in LINK clause and later in TO clause",
- &n->where);
+ "mentioned in LINK clause and later in %s clause",
+ &n->where, list == OMP_LIST_TO ? "TO" : "ENTER");
else if (n->sym->attr.omp_declare_target
&& !n->sym->attr.omp_declare_target_link
&& list == OMP_LIST_LINK)
gfc_error_now ("OMP DECLARE TARGET variable at %L previously "
- "mentioned in TO clause and later in LINK clause",
- &n->where);
+ "mentioned in TO or ENTER clause and later in "
+ "LINK clause", &n->where);
else if (n->sym->mark)
gfc_error_now ("Variable at %L mentioned multiple times in "
"clauses of the same OMP DECLARE TARGET directive",
@@ -4598,14 +4618,14 @@ gfc_match_omp_declare_target (void)
&& n->u.common->omp_declare_target_link
&& list != OMP_LIST_LINK)
gfc_error_now ("OMP DECLARE TARGET COMMON at %L previously "
- "mentioned in LINK clause and later in TO clause",
- &n->where);
+ "mentioned in LINK clause and later in %s clause",
+ &n->where, list == OMP_LIST_TO ? "TO" : "ENTER");
else if (n->u.common->omp_declare_target
&& !n->u.common->omp_declare_target_link
&& list == OMP_LIST_LINK)
gfc_error_now ("OMP DECLARE TARGET COMMON at %L previously "
- "mentioned in TO clause and later in LINK clause",
- &n->where);
+ "mentioned in TO or ENTER clause and later in "
+ "LINK clause", &n->where);
else if (n->u.common->head && n->u.common->head->mark)
gfc_error_now ("COMMON at %L mentioned multiple times in "
"clauses of the same OMP DECLARE TARGET directive",
@@ -4639,7 +4659,10 @@ gfc_match_omp_declare_target (void)
s->attr.omp_device_type = c->device_type;
}
}
- if (c->device_type && !c->lists[OMP_LIST_TO] && !c->lists[OMP_LIST_LINK])
+ if (c->device_type
+ && !c->lists[OMP_LIST_ENTER]
+ && !c->lists[OMP_LIST_TO]
+ && !c->lists[OMP_LIST_LINK])
gfc_warning_now (0, "OMP DECLARE TARGET directive at %L with only "
"DEVICE_TYPE clause is ignored", &old_loc);
@@ -6331,7 +6354,7 @@ resolve_omp_clauses (gfc_code *code, gfc_omp_clauses *omp_clauses,
"IN_REDUCTION", "TASK_REDUCTION",
"DEVICE_RESIDENT", "LINK", "USE_DEVICE",
"CACHE", "IS_DEVICE_PTR", "USE_DEVICE_PTR", "USE_DEVICE_ADDR",
- "NONTEMPORAL", "ALLOCATE", "HAS_DEVICE_ADDR" };
+ "NONTEMPORAL", "ALLOCATE", "HAS_DEVICE_ADDR", "ENTER" };
STATIC_ASSERT (ARRAY_SIZE (clause_names) == OMP_LIST_NUM);
if (omp_clauses == NULL)
diff --git a/gcc/testsuite/gfortran.dg/gomp/declare-target-2.f90 b/gcc/testsuite/gfortran.dg/gomp/declare-target-2.f90
index 2217eab07e5..7ac25c84483 100644
--- a/gcc/testsuite/gfortran.dg/gomp/declare-target-2.f90
+++ b/gcc/testsuite/gfortran.dg/gomp/declare-target-2.f90
@@ -1,9 +1,9 @@
! { dg-do compile }
module declare_target_2
- !$omp declare target to (a) link (a) ! { dg-error "TO clause and later in LINK" }
+ !$omp declare target to (a) link (a) ! { dg-error "TO or ENTER clause and later in LINK" }
!$omp declare target (b)
- !$omp declare target link (b) ! { dg-error "TO clause and later in LINK" }
+ !$omp declare target link (b) ! { dg-error "TO or ENTER clause and later in LINK" }
!$omp declare target link (f)
!$omp declare target to (f) ! { dg-error "LINK clause and later in TO" }
!$omp declare target(c, c) ! { dg-error "mentioned multiple times in clauses of the same" }
@@ -39,9 +39,9 @@ subroutine foo ! { dg-error "attribute conflicts" }
!$omp declare target to (/c2/)
!$omp declare target (/c2/)
!$omp declare target to(/c2/)
- !$omp declare target link(/c2/) ! { dg-error "TO clause and later in LINK" }
+ !$omp declare target link(/c2/) ! { dg-error "TO or ENTER clause and later in LINK" }
!$omp declare target link(/c3/)
- !$omp declare target (/c3/) ! { dg-error "LINK clause and later in TO" }
+ !$omp declare target (/c3/) ! { dg-error "LINK clause and later in ENTER" }
!$omp declare target (/c4/, /c4/) ! { dg-error "mentioned multiple times in clauses of the same" }
!$omp declare target to (/c4/) to(/c4/) ! { dg-error "mentioned multiple times in clauses of the same" }
!$omp declare target link (/c5/)
@@ -49,3 +49,13 @@ subroutine foo ! { dg-error "attribute conflicts" }
!$omp declare target link(/c5/)link(/c5/) ! { dg-error "mentioned multiple times in clauses of the same" }
!$omp declare target link(/c5/,/c5/) ! { dg-error "mentioned multiple times in clauses of the same" }
end subroutine
+
+module declare_target_3
+ !$omp declare target enter (a) link (a) ! { dg-error "TO or ENTER clause and later in LINK" }
+ !$omp declare target link(b) enter(b) ! { dg-error "TO or ENTER clause and later in LINK" }
+ !$omp declare target to (c) enter (c) ! { dg-error "mentioned multiple times in clauses of the same" }
+ !$omp declare target enter (d) to (d) ! { dg-error "mentioned multiple times in clauses of the same" }
+ !$omp declare target enter (e) enter (e) ! { dg-error "mentioned multiple times in clauses of the same" }
+ integer, save :: a, b, c, d, e
+end
+
diff --git a/gcc/testsuite/gfortran.dg/gomp/declare-target-4.f90 b/gcc/testsuite/gfortran.dg/gomp/declare-target-4.f90
index 8947b887534..4f5de4bd8c7 100644
--- a/gcc/testsuite/gfortran.dg/gomp/declare-target-4.f90
+++ b/gcc/testsuite/gfortran.dg/gomp/declare-target-4.f90
@@ -21,6 +21,10 @@ subroutine f5
!$omp declare target device_type (nohost) to (f5)
end subroutine
+subroutine f6
+ !$omp declare target enter (f6) device_type (any)
+end subroutine
+
module mymod
! device_type is ignored for variables in OpenMP 5.0
! but TR8 and later apply those rules to variables as well
@@ -69,13 +73,14 @@ module m2
public :: m, n, o, p, q, r, s, t, u, v, w, x
end module m2
-! { dg-final { scan-tree-dump-times "omp declare target" 7 "original" } }
-! { dg-final { scan-tree-dump-times "__attribute__\\(\\(omp declare target \\(device_type\\(" 7 "original" } }
+! { dg-final { scan-tree-dump-times "omp declare target" 8 "original" } }
+! { dg-final { scan-tree-dump-times "__attribute__\\(\\(omp declare target \\(device_type\\(" 8 "original" } }
! { dg-final { scan-tree-dump-not "__attribute__\\(\\(omp declare target \[^\n\r\]*\[\n\r\]void f1" "original" } }
! { dg-final { scan-tree-dump-times "__attribute__\\(\\(omp declare target \\(device_type\\(any\\)\\)\\)\\)\[\n\r]__attribute__\[^\n\r]+\[\n\r]void f2" 1 "original" } }
! { dg-final { scan-tree-dump-times "__attribute__\\(\\(omp declare target \\(device_type\\(any\\)\\)\\)\\)\[\n\r]__attribute__\[^\n\r]+\[\n\r\]void f3" 1 "original" } }
! { dg-final { scan-tree-dump-times "__attribute__\\(\\(omp declare target \\(device_type\\(host\\)\\)\\)\\)\[\n\r]__attribute__\[^\n\r]+\[\n\r\]void f4" 1 "original" } }
! { dg-final { scan-tree-dump-times "__attribute__\\(\\(omp declare target \\(device_type\\(nohost\\)\\)\\)\\)\[\n\r]__attribute__\[^\n\r]+\[\n\r\]void f5" 1 "original" } }
+! { dg-final { scan-tree-dump-times "__attribute__\\(\\(omp declare target \\(device_type\\(any\\)\\)\\)\\)\[\n\r]__attribute__\[^\n\r]+\[\n\r]void f6" 1 "original" } }
! { dg-final { scan-tree-dump-times "__attribute__\\(\\(omp declare target \\(device_type\\(any\\)\\)\\)\\)\[\n\r]__attribute__\[^\n\r]+\[\n\r\]void s1" 1 "original" } }
! { dg-final { scan-tree-dump-times "__attribute__\\(\\(omp declare target \\(device_type\\(nohost\\)\\)\\)\\)\[\n\r]__attribute__\[^\n\r]+\[\n\r\]void s2" 1 "original" } }
! { dg-final { scan-tree-dump-times "__attribute__\\(\\(omp declare target \\(device_type\\(host\\)\\)\\)\\)\[\n\r]__attribute__\[^\n\r]+\[\n\r\]void s3" 1 "original" } }
diff --git a/libgomp/libgomp.texi b/libgomp/libgomp.texi
index 56aab4494ad..ff02ccd4969 100644
--- a/libgomp/libgomp.texi
+++ b/libgomp/libgomp.texi
@@ -368,7 +368,7 @@ The OpenMP 4.5 specification is fully supported.
@item If a matching mapped list item is not found in the data environment, the
pointer retains its original value @tab N @tab
@item New @code{enter} clause as alias for @code{to} on declare target directive
- @tab N @tab
+ @tab Y @tab
@item Deprecation of @code{to} clause on declare target directive @tab N @tab
@item Extended list of directives permitted in Fortran pure procedures
@tab N @tab
diff --git a/libgomp/testsuite/libgomp.fortran/declare-target-1.f90 b/libgomp/testsuite/libgomp.fortran/declare-target-1.f90
index fd9c26fde95..d9abf685a54 100644
--- a/libgomp/testsuite/libgomp.fortran/declare-target-1.f90
+++ b/libgomp/testsuite/libgomp.fortran/declare-target-1.f90
@@ -2,8 +2,10 @@
! { dg-additional-sources declare-target-2.f90 }
module declare_target_1_mod
- integer :: var_x
+ integer :: var_x, var_y, var_z
!$omp declare target(var_x)
+ !$omp declare target to(var_y)
+ !$omp declare target enter(var_z)
end module declare_target_1_mod
interface
diff --git a/libgomp/testsuite/libgomp.fortran/declare-target-2.f90 b/libgomp/testsuite/libgomp.fortran/declare-target-2.f90
index 85fc68c6ede..2210fc5a52f 100644
--- a/libgomp/testsuite/libgomp.fortran/declare-target-2.f90
+++ b/libgomp/testsuite/libgomp.fortran/declare-target-2.f90
@@ -7,12 +7,18 @@ subroutine foo
use declare_target_1_mod
var_x = 10
- !$omp target update to(var_x)
+ var_y = 20
+ var_z = 30
+ !$omp target update to(var_x, var_y, var_z)
!$omp target
var_x = var_x * 2;
+ var_y = var_y * 3;
+ var_z = var_z * 4;
!$omp end target
- !$omp target update from(var_x)
+ !$omp target update from(var_x, var_y, var_z)
if (var_x /= 20) stop 1
+ if (var_y /= 20*3) stop 2
+ if (var_z /= 30*4) stop 3
end subroutine foo
next parent reply other threads:[~2022-05-27 14:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <YpCt2rJGuydcFlA4@tucnak>
2022-05-27 14:52 ` Tobias Burnus [this message]
2022-05-27 15:20 ` Jakub Jelinek
2022-05-27 15:44 ` Jakub Jelinek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=651ae4c2-9440-b8df-e8af-b14491d45937@codesourcery.com \
--to=tobias@codesourcery.com \
--cc=fortran@gcc.gnu.org \
--cc=gcc-patches@gcc.gnu.org \
--cc=jakub@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).