* Patch to improve consistency in GAS
@ 1997-01-08 22:03 Robert Lipe
0 siblings, 0 replies; only message in thread
From: Robert Lipe @ 1997-01-08 22:03 UTC (permalink / raw)
To: gas2
Please apply this patch to GAS. Since this is my code, I feel pretty
good about the relative "safety" of this move. It allows the .note
section to be generated for building under ELF while not bringing a bunch
of ELF-isms into obj-coff.
It should be considered independently from other work in the assembler
emulation stuff.
Thank you.
RJL
Wed Jan 8 23:24:05 CST 1997 Robert Lipe <robertl@dgii.com>
* config/tc-i386.c (sco_id): Moved from here
config/obj-elf.c (sco_id): to here. Adding the
identifier really is an SCO ELF specific thing, not
just a SCO x86 specific thing.
*** gas.orig/config/tc-i386.c Tue Dec 17 03:05:30 1996
--- gas/config/tc-i386.c Wed Jan 8 23:08:22 1997
***************
*** 3073,3171 ****
#endif /* BFD_ASSEMBLER? */
\f
- #ifdef SCO_ELF
-
- /* Heavily plagarized from obj_elf_version. The idea is to emit the
- SCO specific identifier in the .notes section to satisfy the SCO
- linker.
-
- This looks more complicated than it really is. As opposed to the
- "obvious" solution, this should handle the cross dev cases
- correctly. (i.e, hosting on a 64 bit big endian processor, but
- generating SCO Elf code) Efficiency isn't a concern, as there
- should be exactly one of these sections per object module.
-
- SCO OpenServer 5 identifies it's ELF modules with a standard ELF
- .note section.
-
- int_32 namesz = 4 ; Name size
- int_32 descsz = 12 ; Descriptive information
- int_32 type = 1 ;
- char name[4] = "SCO" ; Originator name ALWAYS SCO + NULL
- int_32 version = (major ver # << 16) | version of tools ;
- int_32 source = (tool_id << 16 ) | 1 ;
- int_32 info = 0 ; These are set by the SCO tools, but we
- don't know enough about the source
- environment to set them. SCO ld currently
- ignores them, and recommends we set them
- to zero. */
-
- #define SCO_MAJOR_VERSION 0x1
- #define SCO_MINOR_VERSION 0x1
-
- void
- sco_id ()
- {
- char *name;
- unsigned int c;
- char ch;
- char *p;
- asection *seg = now_seg;
- subsegT subseg = now_subseg;
- Elf_Internal_Note i_note;
- Elf_External_Note e_note;
- asection *note_secp = (asection *) NULL;
- int i, len;
-
- /* create the .note section */
-
- note_secp = subseg_new (".note", 0);
- bfd_set_section_flags (stdoutput,
- note_secp,
- SEC_HAS_CONTENTS | SEC_READONLY);
-
- /* process the version string */
-
- i_note.namesz = 4;
- i_note.descsz = 12; /* 12 descriptive bytes */
- i_note.type = NT_VERSION; /* Contains a version string */
-
- p = frag_more (sizeof (i_note.namesz));
- md_number_to_chars (p, (valueT) i_note.namesz, 4);
-
- p = frag_more (sizeof (i_note.descsz));
- md_number_to_chars (p, (valueT) i_note.descsz, 4);
-
- p = frag_more (sizeof (i_note.type));
- md_number_to_chars (p, (valueT) i_note.type, 4);
-
- p = frag_more (4);
- strcpy (p, "SCO");
-
- /* Note: this is the version number of the ELF we're representing */
- p = frag_more (4);
- md_number_to_chars (p, (SCO_MAJOR_VERSION << 16) | (SCO_MINOR_VERSION), 4);
-
- /* Here, we pick a magic number for ourselves (yes, I "registered"
- it with SCO. The bottom bit shows that we are compat with the
- SCO ABI. */
- p = frag_more (4);
- md_number_to_chars (p, 0x4c520000 | 0x0001, 4);
-
- /* If we knew (or cared) what the source language options were, we'd
- fill them in here. SCO has given us permission to ignore these
- and just set them to zero. */
- p = frag_more (4);
- md_number_to_chars (p, 0x0000, 4);
-
- frag_align (2, 0);
-
- /* We probably can't restore the current segment, for there likely
- isn't one yet... */
- if (seg && subseg)
- subseg_set (seg, subseg);
- }
-
- #endif /* SCO_ELF */
-
/* end of tc-i386.c */
--- 3096,3099 ----
*** gas.orig/config/obj-elf.c Tue Dec 17 03:05:25 1996
--- gas/config/obj-elf.c Wed Jan 8 23:08:47 1997
***************
*** 1284,1289 ****
--- 1284,1386 ----
#endif /* NEED_ECOFF_DEBUG */
}
+ #ifdef SCO_ELF
+
+ /* Heavily plagarized from obj_elf_version. The idea is to emit the
+ SCO specific identifier in the .notes section to satisfy the SCO
+ linker.
+
+ This looks more complicated than it really is. As opposed to the
+ "obvious" solution, this should handle the cross dev cases
+ correctly. (i.e, hosting on a 64 bit big endian processor, but
+ generating SCO Elf code) Efficiency isn't a concern, as there
+ should be exactly one of these sections per object module.
+
+ SCO OpenServer 5 identifies it's ELF modules with a standard ELF
+ .note section.
+
+ int_32 namesz = 4 ; Name size
+ int_32 descsz = 12 ; Descriptive information
+ int_32 type = 1 ;
+ char name[4] = "SCO" ; Originator name ALWAYS SCO + NULL
+ int_32 version = (major ver # << 16) | version of tools ;
+ int_32 source = (tool_id << 16 ) | 1 ;
+ int_32 info = 0 ; These are set by the SCO tools, but we
+ don't know enough about the source
+ environment to set them. SCO ld currently
+ ignores them, and recommends we set them
+ to zero. */
+
+ #define SCO_MAJOR_VERSION 0x1
+ #define SCO_MINOR_VERSION 0x1
+
+ void
+ sco_id ()
+ {
+
+ char *name;
+ unsigned int c;
+ char ch;
+ char *p;
+ asection *seg = now_seg;
+ subsegT subseg = now_subseg;
+ Elf_Internal_Note i_note;
+ Elf_External_Note e_note;
+ asection *note_secp = (asection *) NULL;
+ int i, len;
+
+ /* create the .note section */
+
+ note_secp = subseg_new (".note", 0);
+ bfd_set_section_flags (stdoutput,
+ note_secp,
+ SEC_HAS_CONTENTS | SEC_READONLY);
+
+ /* process the version string */
+
+ i_note.namesz = 4;
+ i_note.descsz = 12; /* 12 descriptive bytes */
+ i_note.type = NT_VERSION; /* Contains a version string */
+
+ p = frag_more (sizeof (i_note.namesz));
+ md_number_to_chars (p, (valueT) i_note.namesz, 4);
+
+ p = frag_more (sizeof (i_note.descsz));
+ md_number_to_chars (p, (valueT) i_note.descsz, 4);
+
+ p = frag_more (sizeof (i_note.type));
+ md_number_to_chars (p, (valueT) i_note.type, 4);
+
+ p = frag_more (4);
+ strcpy (p, "SCO");
+
+ /* Note: this is the version number of the ELF we're representing */
+ p = frag_more (4);
+ md_number_to_chars (p, (SCO_MAJOR_VERSION << 16) | (SCO_MINOR_VERSION), 4);
+
+ /* Here, we pick a magic number for ourselves (yes, I "registered"
+ it with SCO. The bottom bit shows that we are compat with the
+ SCO ABI. */
+ p = frag_more (4);
+ md_number_to_chars (p, 0x4c520000 | 0x0001, 4);
+
+ /* If we knew (or cared) what the source language options were, we'd
+ fill them in here. SCO has given us permission to ignore these
+ and just set them to zero. */
+ p = frag_more (4);
+ md_number_to_chars (p, 0x0000, 4);
+
+ frag_align (2, 0);
+
+ /* We probably can't restore the current segment, for there likely
+ isn't one yet... */
+ if (seg && subseg)
+ subseg_set (seg, subseg);
+
+ }
+
+ #endif /* SCO_ELF */
+
const struct format_ops elf_format_ops =
{
bfd_target_elf_flavour,
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~1997-01-08 22:03 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
1997-01-08 22:03 Patch to improve consistency in GAS Robert Lipe
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).