public inbox for gcc-cvs@sourceware.org
help / color / mirror / Atom feed
* [gcc r12-6106] x86: PR target/103773: Fix wrong-code with -Oz from pop to memory.
@ 2021-12-23 12:36 Roger Sayle
0 siblings, 0 replies; only message in thread
From: Roger Sayle @ 2021-12-23 12:36 UTC (permalink / raw)
To: gcc-cvs
https://gcc.gnu.org/g:ef26c151c14a87177d46fd3d725e7f82e040e89f
commit r12-6106-gef26c151c14a87177d46fd3d725e7f82e040e89f
Author: Roger Sayle <roger@nextmovesoftware.com>
Date: Thu Dec 23 12:33:07 2021 +0000
x86: PR target/103773: Fix wrong-code with -Oz from pop to memory.
This is a fix to PR target/103773 where -Oz shouldn't use push/pop
on x86 to shrink writing small integer constants to memory.
Instead clang uses "andl $0, mem" for writing zero, and "orl $-1, mem"
when writing -1 to memory when using -Oz. This patch implements this
via peephole2 where we can confirm that its ok to clobber the flags.
2021-12-23 Roger Sayle <roger@nextmovesoftware.com>
Uroš Bizjak <ubizjak@gmail.com>
gcc/ChangeLog
PR target/103773
* config/i386/i386.md (*mov<mode>_and): New define_insn for
writing a zero to memory using AND.
(*mov<mode>_or): Extend to allow memory destination and HImode.
(*movdi_internal): Remove -Oz push/pop optimization from here.
(*movsi_internal): Likewise.
(peephole2): Perform -Oz push/pop optimization here, only for
register destinations, values other than zero, and in functions
that don't used the red zone.
(peephole2): With -Oz, convert writes of 0 or -1 to memory into
their clobber forms, i.e. *mov<mode>_and and *mov<mode>_or resp.
gcc/testsuite/ChangeLog
PR target/103773
* gcc.target/i386/pr103773-2.c: New test case.
* gcc.target/i386/pr103773.c: New test case.
Diff:
---
gcc/config/i386/i386.md | 62 +++++++++++++++++++++---------
gcc/testsuite/gcc.target/i386/pr103773-2.c | 19 +++++++++
gcc/testsuite/gcc.target/i386/pr103773.c | 12 ++++++
3 files changed, 75 insertions(+), 18 deletions(-)
diff --git a/gcc/config/i386/i386.md b/gcc/config/i386/i386.md
index 58b10643fcb..284b9507466 100644
--- a/gcc/config/i386/i386.md
+++ b/gcc/config/i386/i386.md
@@ -2028,9 +2028,19 @@
(set_attr "mode" "SI")
(set_attr "length_immediate" "0")])
+(define_insn "*mov<mode>_and"
+ [(set (match_operand:SWI248 0 "memory_operand" "=m")
+ (match_operand:SWI248 1 "const0_operand"))
+ (clobber (reg:CC FLAGS_REG))]
+ "reload_completed"
+ "and{<imodesuffix>}\t{%1, %0|%0, %1}"
+ [(set_attr "type" "alu1")
+ (set_attr "mode" "<MODE>")
+ (set_attr "length_immediate" "1")])
+
(define_insn "*mov<mode>_or"
- [(set (match_operand:SWI48 0 "register_operand" "=r")
- (match_operand:SWI48 1 "constm1_operand"))
+ [(set (match_operand:SWI248 0 "nonimmediate_operand" "=rm")
+ (match_operand:SWI248 1 "constm1_operand"))
(clobber (reg:CC FLAGS_REG))]
"reload_completed"
"or{<imodesuffix>}\t{%1, %0|%0, %1}"
@@ -2218,14 +2228,7 @@
case TYPE_IMOV:
gcc_assert (!flag_pic || LEGITIMATE_PIC_OPERAND_P (operands[1]));
if (get_attr_mode (insn) == MODE_SI)
- {
- if (optimize_size > 1
- && TARGET_64BIT
- && CONST_INT_P (operands[1])
- && IN_RANGE (INTVAL (operands[1]), -128, 127))
- return "push{q}\t%1\n\tpop{q}\t%0";
- return "mov{l}\t{%k1, %k0|%k0, %k1}";
- }
+ return "mov{l}\t{%k1, %k0|%k0, %k1}";
else if (which_alternative == 4)
return "movabs{q}\t{%1, %0|%0, %1}";
else if (ix86_use_lea_for_mov (insn, operands))
@@ -2443,14 +2446,6 @@
gcc_assert (!flag_pic || LEGITIMATE_PIC_OPERAND_P (operands[1]));
if (ix86_use_lea_for_mov (insn, operands))
return "lea{l}\t{%E1, %0|%0, %E1}";
- else if (optimize_size > 1
- && CONST_INT_P (operands[1])
- && IN_RANGE (INTVAL (operands[1]), -128, 127))
- {
- if (TARGET_64BIT)
- return "push{q}\t%1\n\tpop{q}\t%q0";
- return "push{l}\t%1\n\tpop{l}\t%0";
- }
else
return "mov{l}\t{%1, %0|%0, %1}";
@@ -2514,6 +2509,37 @@
]
(symbol_ref "true")))])
+;; With -Oz, transform mov $imm,reg to the shorter push $imm; pop reg.
+(define_peephole2
+ [(set (match_operand:SWI248 0 "general_reg_operand")
+ (match_operand:SWI248 1 "const_int_operand"))]
+ "optimize_insn_for_size_p () && optimize_size > 1
+ && operands[1] != const0_rtx
+ && IN_RANGE (INTVAL (operands[1]), -128, 127)
+ && !ix86_red_zone_used"
+ [(set (match_dup 2) (match_dup 1))
+ (set (match_dup 0) (match_dup 3))]
+{
+ if (GET_MODE (operands[0]) != word_mode)
+ operands[0] = gen_rtx_REG (word_mode, REGNO (operands[0]));
+
+ operands[2] = gen_rtx_MEM (word_mode,
+ gen_rtx_PRE_DEC (Pmode, stack_pointer_rtx));
+ operands[3] = gen_rtx_MEM (word_mode,
+ gen_rtx_POST_INC (Pmode, stack_pointer_rtx));
+})
+
+;; With -Oz, transform mov $0,mem to the shorter and $0,mem.
+;; Likewise, transform mov $-1,mem to the shorter or $-1,mem.
+(define_peephole2
+ [(set (match_operand:SWI248 0 "memory_operand")
+ (match_operand:SWI248 1 "const_int_operand"))]
+ "(operands[1] == const0_rtx || operands[1] == constm1_rtx)
+ && optimize_insn_for_size_p () && optimize_size > 1
+ && peep2_regno_dead_p (0, FLAGS_REG)"
+ [(parallel [(set (match_dup 0) (match_dup 1))
+ (clobber (reg:CC FLAGS_REG))])])
+
(define_insn "*movhi_internal"
[(set (match_operand:HI 0 "nonimmediate_operand"
"=r,r,r,m ,*k,*k ,r ,m ,*k ,?r,?*v,*v,*v,*v,m")
diff --git a/gcc/testsuite/gcc.target/i386/pr103773-2.c b/gcc/testsuite/gcc.target/i386/pr103773-2.c
new file mode 100644
index 00000000000..9dafebdafbf
--- /dev/null
+++ b/gcc/testsuite/gcc.target/i386/pr103773-2.c
@@ -0,0 +1,19 @@
+/* { dg-do compile } */
+/* { dg-options "-Oz" } */
+short s;
+int i;
+long long l;
+
+void s0() { s = 0; }
+void sm1() { s = -1; }
+void i0() { i = 0; }
+void im1() { i = -1; }
+void l0() { l = 0; }
+void lm1() { l = -1; }
+
+/* { dg-final { scan-assembler-not "\tmov\[wlq\]\t\\\$0," } } */
+/* { dg-final { scan-assembler-not "\tmov\[wlq\]\t\\\$-1," } } */
+/* { dg-final { scan-assembler "\tandw\t\\\$0," } } */
+/* { dg-final { scan-assembler "\torw\t\\\$-1," } } */
+/* { dg-final { scan-assembler "\torl\t\\\$-1," } } */
+
diff --git a/gcc/testsuite/gcc.target/i386/pr103773.c b/gcc/testsuite/gcc.target/i386/pr103773.c
new file mode 100644
index 00000000000..1e4b8ce903c
--- /dev/null
+++ b/gcc/testsuite/gcc.target/i386/pr103773.c
@@ -0,0 +1,12 @@
+/* { dg-do run } */
+/* { dg-options "-Oz" } */
+
+unsigned long long x;
+
+int main (void)
+{
+ __builtin_memset (&x, 0xff, 4);
+ if (x != 0xffffffff)
+ __builtin_abort ();
+ return 0;
+}
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2021-12-23 12:36 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-23 12:36 [gcc r12-6106] x86: PR target/103773: Fix wrong-code with -Oz from pop to memory Roger Sayle
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).