[gcc r10-10780] Darwin, config: Revise host config fragment.

[gcc r10-10780] Darwin, config: Revise host config fragment.

[Iain D Sandoe]

https://gcc.gnu.org/g:107b1618fca7aa81cb73f17cdd22c055ecdcefb8

commit r10-10780-g107b1618fca7aa81cb73f17cdd22c055ecdcefb8
Author: Iain Sandoe <iain@sandoe.co.uk>
Date:   Sat Jul 3 15:42:16 2021 +0100

    Darwin, config: Revise host config fragment.
    
    There were two uses for the Darwin host config fragment:
    
    The first is to arrange for targets that support mdynamic-no-pic
    to be built with that enabled (since it makes a significant
    difference to the compiler performance).  We can be more specific
    in the application of this, since it only applies to 32b hosts
    plus powerpc64-darwin9.
    
    The second was to work around a tool bug where -fno-PIE was not
    propagated to the link stage.  This second use is redundant,
    since the buggy toolchain cannot bootstrap current GCC sources
    anyway.
    
    This makes the host fragment more specific and reduces the number
    of toolchains for which it is included which reduces clutter in
    configure lines.
    
    Signed-off-by: Iain Sandoe <iain@sandoe.co.uk>
    
    config/ChangeLog:
    
            * mh-darwin: Make this specific to handling the
            mdynamic-no-pic case.
    
    ChangeLog:
    
            * configure: Regenerate.
            * configure.ac: Adjust cases for which it is necessary to
            include the Darwin host config fragment.
    
    (cherry picked from commit 54258e22b0846aaa6bd3265f592feb161eecda75)

Diff:
---
 config/mh-darwin | 57 ++++++++++++++++++++++++++++++++------------------------
 configure        |  2 +-
 configure.ac     |  2 +-
 3 files changed, 35 insertions(+), 26 deletions(-)

diff --git a/config/mh-darwin b/config/mh-darwin
index 148b73038c3..fb2bb5ad1d9 100644
--- a/config/mh-darwin
+++ b/config/mh-darwin
@@ -1,29 +1,38 @@
 # The -mdynamic-no-pic ensures that the compiler executable is built without
-# position-independent-code -- the usual default on Darwin. This fix speeds
-# compiles by 3-5%.  Don't add it if the compiler doesn't also support
-# -mno-dynamic-no-pic to undo it.
-DARWIN_MDYNAMIC_NO_PIC := \
-`case ${host} in i?86-*-darwin* | powerpc-*-darwin*) \
-   $(CC) -S -xc /dev/null -o /dev/null -mno-dynamic-no-pic 2>/dev/null \
-   && echo -mdynamic-no-pic ;; esac`
-DARWIN_GCC_MDYNAMIC_NO_PIC := \
-`case ${host} in i?86-*-darwin* | powerpc-*-darwin*) \
-   $(CC) -S -xc /dev/null -o /dev/null -mno-dynamic-no-pic 2>/dev/null \
-   || echo -mdynamic-no-pic ;; esac`
+# position-independent-code -- the usual default on Darwin. This speeds compiles
+# by 8-20% (measurements made against GCC-11).
+# However, we cannot add it unless the bootstrap compiler supports
+# -mno-dynamic-no-pic to undo it, since libiberty, at least, needs this.
 
-# ld on Darwin versions >= 10.7 defaults to PIE executables. Disable this for
-# gcc components, since it is incompatible with our pch implementation.
-DARWIN_NO_PIE := `case ${host} in *-*-darwin[1][1-9]*) echo -Wl,-no_pie ;; esac;`
+# We use Werror, since some versions of clang report unknown command line flags
+# as a warning only.
 
-BOOT_CFLAGS += $(DARWIN_MDYNAMIC_NO_PIC)
-BOOT_LDFLAGS += $(DARWIN_NO_PIE)
+# We only need to determine this for the host tool used to build stage1 (or a
+# non-bootstrapped compiler), later stages will be built by GCC which supports
+# the required flags.
 
-# Similarly, for cross-compilation.
-STAGE1_CFLAGS += $(DARWIN_MDYNAMIC_NO_PIC)
-STAGE1_LDFLAGS += $(DARWIN_NO_PIE)
+BOOTSTRAP_TOOL_CAN_USE_MDYNAMIC_NO_PIC := $(shell \
+  $(CC) -S -xc /dev/null -o /dev/null -Werror -mno-dynamic-no-pic 2>/dev/null \
+  && echo true)
 
-# Without -mno-dynamic-no-pic support, add -mdynamic-no-pic just to later
-# stages when we know it is built with gcc.
-STAGE2_CFLAGS += $(DARWIN_GCC_MDYNAMIC_NO_PIC)
-STAGE3_CFLAGS += $(DARWIN_GCC_MDYNAMIC_NO_PIC)
-STAGE4_CFLAGS += $(DARWIN_GCC_MDYNAMIC_NO_PIC)
+@if gcc-bootstrap
+ifeq (${BOOTSTRAP_TOOL_CAN_USE_MDYNAMIC_NO_PIC},true)
+STAGE1_CFLAGS += -mdynamic-no-pic
+else
+STAGE1_CFLAGS += -fPIC
+endif
+# Add -mdynamic-no-pic to later stages when we know it is built with GCC.
+BOOT_CFLAGS += -mdynamic-no-pic
+@endif gcc-bootstrap
+
+@unless gcc-bootstrap
+ifeq (${BOOTSTRAP_TOOL_CAN_USE_MDYNAMIC_NO_PIC},true)
+# FIXME: we should also enable this for cross and non-bootstrap builds but
+# that needs amendment to libcc1.
+# CFLAGS += -mdynamic-no-pic
+# CXXFLAGS += -mdynamic-no-pic
+else
+CFLAGS += -fPIC
+CXXFLAGS += -fPIC
+endif
+@endunless gcc-bootstrap
diff --git a/configure b/configure
index f2ec106a86e..3d566041069 100755
--- a/configure
+++ b/configure
@@ -4077,7 +4077,7 @@ fi
   hppa*-*)
     host_makefile_frag="config/mh-pa"
     ;;
-  *-*-darwin*)
+  i?86-*-darwin[89]* | i?86-*-darwin1[0-7]* | powerpc*-*-darwin*)
     host_makefile_frag="config/mh-darwin"
     ;;
   powerpc-*-aix*)
diff --git a/configure.ac b/configure.ac
index 115db3f402a..561c89f56e1 100644
--- a/configure.ac
+++ b/configure.ac
@@ -1333,7 +1333,7 @@ case "${host}" in
   hppa*-*)	
     host_makefile_frag="config/mh-pa"
     ;;
-  *-*-darwin*)
+  i?86-*-darwin[[89]]* | i?86-*-darwin1[[0-7]]* | powerpc*-*-darwin*)
     host_makefile_frag="config/mh-darwin"
     ;;
   powerpc-*-aix*)