* Re: ezmlm response
[not found] <1573034147.76289.ezmlm@gcc.gnu.org>
@ 2019-11-06 9:56 ` CNZhangQuan
0 siblings, 0 replies; 25+ messages in thread
From: CNZhangQuan @ 2019-11-06 9:56 UTC (permalink / raw)
To: gcc-help
On Wed, Nov 6, 2019 at 5:55 PM <gcc-help@gcc.gnu.org> wrote:
> Hi! This is the ezmlm program. I'm managing the
> gcc@gcc.gnu.org mailing list.
>
> Acknowledgment: The address
>
> cnzhangquan@gmail.com
>
> was not on the gcc mailing list when I received
> your request and is not a subscriber of this list.
>
> If you unsubscribe, but continue to receive mail, you're subscribed
> under a different address than you currently use. Please look at the
> header for:
>
> 'Return-Path: <gcc-return-1234-user=host.dom@gcc.gnu.org>'
>
> The unsubscribe address for this user would be:
> 'gcc-unsubscribe-user=host.dom@gcc.gnu.org'.
> Just mail to that address, substituting user=host.dom for the real
> values, reply to the confirmation request, and you should receive a message
> that you're off the list.
>
> For some mail programs, you need to make the headers visible to
> see the return path:
>
> For Eudora 4.0, click on the "Blah blah ..." button.
> For PMMail, click on "Window->Show entire message/header".
>
> If this still doesn't work, I'm sorry to say that I can't help you.
> Please FORWARD a list message together with a note about what you're
> trying to achieve and a list of addresses that you might be subscribed
> under to my owner:
>
> gcc-owner@gcc.gnu.org
>
> who will take care of it. My owner is a little bit slower than I am,
> so please be patient.
>
>
> --- Administrative commands for the gcc list ---
>
> I can handle administrative requests automatically. Please
> do not send them to the list address! Instead, send
> your message to the correct command address:
>
> To subscribe to the list, send a message to:
> <gcc-subscribe@gcc.gnu.org>
>
> To remove your address from the list, send a message to:
> <gcc-unsubscribe@gcc.gnu.org>
>
> Send mail to the following for info and FAQ for this list:
> <gcc-info@gcc.gnu.org>
> <gcc-faq@gcc.gnu.org>
>
> Similar addresses exist for the digest list:
> <gcc-digest-subscribe@gcc.gnu.org>
> <gcc-digest-unsubscribe@gcc.gnu.org>
>
> To get messages 123 through 145 (a maximum of 100 per request), mail:
> <gcc-get.123_145@gcc.gnu.org>
>
> To get an index with subject and author for messages 123-456 , mail:
> <gcc-index.123_456@gcc.gnu.org>
>
> They are always returned as sets of 100, max 2000 per request,
> so you'll actually get 100-499.
>
> To receive all messages with the same subject as message 12345,
> send an empty message to:
> <gcc-thread.12345@gcc.gnu.org>
>
> The messages do not really need to be empty, but I will ignore
> their content. Only the ADDRESS you send to is important.
>
> You can start a subscription for an alternate address,
> for example "john@host.domain", just add a hyphen and your
> address (with '=' instead of '@') after the command word:
> <gcc-subscribe-john=host.domain@gcc.gnu.org>
>
> To stop subscription for this address, mail:
> <gcc-unsubscribe-john=host.domain@gcc.gnu.org>
>
> In both cases, I'll send a confirmation message to that address. When
> you receive it, simply reply to it to complete your subscription.
>
> If despite following these instructions, you do not get the
> desired results, please contact my owner at
> gcc-owner@gcc.gnu.org. Please be patient, my owner is a
> lot slower than I am ;-)
>
> --- Enclosed is a copy of the request I received.
>
> Return-Path: <net_robber@timectrl.net>
> Received: (qmail 76284 invoked by uid 89); 6 Nov 2019 09:55:46 -0000
> Authentication-Results: sourceware.org; auth=none
> X-Virus-Checked: by ClamAV 0.100.3 on sourceware.org
> X-Virus-Found: No
> X-Spam-SWARE-Status: No, score=-106.6 required=5.0
> tests=AWL,BAYES_00,FREEMAIL_FROM,GIT_PATCH_1,GIT_PATCH_2,HTML_MESSAGE,RCVD_IN_DNSWL_NONE,SPF_PASS,USER_IN_ALL_SPAM_TO
> autolearn=ham version=3.3.1 spammy=gcc-thread.12345@gcc.gnu.org,
> gccthread12345gccgnuorg, U*gcc-thread.12345, sk:gcc-thr
> X-Spam-Status: No, score=-106.6 required=5.0
> tests=AWL,BAYES_00,FREEMAIL_FROM,GIT_PATCH_1,GIT_PATCH_2,HTML_MESSAGE,RCVD_IN_DNSWL_NONE,SPF_PASS,USER_IN_ALL_SPAM_TO
> autolearn=ham version=3.3.1
> X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on sourceware.org
> X-Spam-Level:
> X-HELO: mail-pf1-f177.google.com
> Received: from mail-pf1-f177.google.com (HELO mail-pf1-f177.google.com)
> (209.85.210.177)
> by sourceware.org (qpsmtpd/0.93/v0.84-503-g423c35a) with ESMTP; Wed, 06
> Nov 2019 09:55:44 +0000
> Received: by mail-pf1-f177.google.com with SMTP id n13so6747560pff.1
> for <gcc-uc.1573034047.heakfaekenkdmgjdjeik-cnzhangquan=
> gmail.com@gcc.gnu.org>; Wed, 06 Nov 2019 01:55:44 -0800 (PST)
> DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
> d=gmail.com; s=20161025;
>
> h=mime-version:references:in-reply-to:from:date:message-id:subject:to;
> bh=ZDY3RNanhNu6w5Xzdk8Fzm+snga11DNDf5mOMO92Ayg=;
>
> b=hXfLBWSSRLVFm64YOmOtFAXhhGK1FCxknFTtQEeUC18ujuLmrnIX0Kse/Ilq5YWJyl
>
> cUWhZXE2qjAWCYkqjrtT9Pp8Burip0J1sVyyyCSsX3ojwQBqeAL2BB+wBPE167QaH3wh
>
> K4ohifi+kPGNPK60vdSPlxx93PuceyxVfNHCeGrXgM3jjr1J7Iu3NyRb2+CA7/HedRKe
>
> ImoeoloQcHI3ow45Vf8eB5+LMsKbYisAdfzcp1zHhq7MLFlIJ+esF3eY53s2Jzg+UIDT
>
> 41ncpENPQsA4XMgjunGnfGZ8/aP80cf9kqhPfMg2vQ0C6pZ5Sqgkvs4zcm2BuQeaJ5Me
> BIlg==
> X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
> d=1e100.net; s=20161025;
> h=x-gm-message-state:mime-version:references:in-reply-to:from:date
> :message-id:subject:to;
> bh=ZDY3RNanhNu6w5Xzdk8Fzm+snga11DNDf5mOMO92Ayg=;
>
> b=AqvUykHpsbZvExTRfCwIYmjygEeBu2E8K8AAQaoGvN2yv9HZQ/eSZkdUBSNYDHqgTM
>
> /GSxZyHBmvfU8fWHNTzwzrCFYAsmIYBFNvjL3JkSvBXPLDB2Cf+q1+SZyXHMzF+FCoyb
>
> h95V8/gsl6fhJez9Z21XsQygWrRXFT9I+XG1T7SZG/U6Sw1glh6BRiYf9G31gnxmz375
>
> s8o2zzH1TXVtvthpYG4/t2tpjfSMOqbpcdwUipoFK1ROrRFM1i+TxUHqh8boRC1uyXN0
>
> Dh9tZdQ9ronZCebdNlvg0miHI38CvaNMi5714fG8C4DGrgw/kmkYhpekbRkfC8/9W8/g
> wtjg==
> X-Gm-Message-State:
> APjAAAUK46yS05pfGBSTcvCDODc2wTD+fHNQPrcjan8lAL2LnSLpnv0w
> 9f525xfCt0bW7ucBi7a647yf/r/fa/hjXkKF4VMFcKjTC7g=
> X-Google-Smtp-Source:
> APXvYqyGi8RH/JRVv9ihmcimiUAEPb2KrpCTRQxeKIx380jiRQ2GqXVGmVYwDixjlTKwP8hMS+eLgMu2YrH9AbKJk3A=
> X-Received: by 2002:a63:4819:: with SMTP id
> v25mr1811305pga.165.1573034142519;
> Wed, 06 Nov 2019 01:55:42 -0800 (PST)
> MIME-Version: 1.0
> References: <1573034047.74447.ezmlm@gcc.gnu.org>
> In-Reply-To: <1573034047.74447.ezmlm@gcc.gnu.org>
> From: CNZhangQuan <cnzhangquan@gmail.com>
> Date: Wed, 6 Nov 2019 17:55:26 +0800
> Message-ID: <
> CACdxSLmNtMGOOrrbO-_qEO78Otg1JBYZ9hbsGnLCa2OE1HJcbA@mail.gmail.com>
> Subject: Re: confirm unsubscribe from gcc@gcc.gnu.org
> To: gcc-uc.1573034047.heakfaekenkdmgjdjeik-cnzhangquan=
> gmail.com@gcc.gnu.org
> Content-Type: multipart/alternative;
> boundary="00000000000048eb1a0596aa8d07"
>
> --00000000000048eb1a0596aa8d07
> Content-Type: text/plain; charset="UTF-8"
>
> On Wed, Nov 6, 2019 at 5:54 PM <gcc-help@gcc.gnu.org> wrote:
>
> > Hi! This is the ezmlm program. I'm managing the
> > gcc@gcc.gnu.org mailing list.
> >
> > To confirm that you would like
> >
> > cnzhangquan@gmail.com
> >
> > removed from the gcc mailing list, please send an empty reply
> > to this address:
> >
> > gcc-uc.1573034047.heakfaekenkdmgjdjeik-cnzhangquan=
> > gmail.com@gcc.gnu.org
> >
> > Usually, this happens when you just hit the "reply" button.
> > If this does not work, simply copy the address and paste it into
> > the "To:" field of a new message.
> >
> > I haven't checked whether your address is currently on the mailing list.
> > To see what address you used to subscribe, look at the messages you are
> > receiving from the mailing list. Each message has your address hidden
> > inside its return path; for example, mary@xdd.ff.com receives messages
> > with return path: <gcc-return-<number>-mary=xdd.ff.com@gcc.gnu.org.
> >
> > Some mail programs are broken and cannot handle long addresses. If you
> > cannot reply to this request, instead send a message to
> > <gcc-request@gcc.gnu.org> and put the entire address listed above
> > into the "Subject:" line.
> >
> >
> > --- Administrative commands for the gcc list ---
> >
> > I can handle administrative requests automatically. Please
> > do not send them to the list address! Instead, send
> > your message to the correct command address:
> >
> > To subscribe to the list, send a message to:
> > <gcc-subscribe@gcc.gnu.org>
> >
> > To remove your address from the list, send a message to:
> > <gcc-unsubscribe@gcc.gnu.org>
> >
> > Send mail to the following for info and FAQ for this list:
> > <gcc-info@gcc.gnu.org>
> > <gcc-faq@gcc.gnu.org>
> >
> > Similar addresses exist for the digest list:
> > <gcc-digest-subscribe@gcc.gnu.org>
> > <gcc-digest-unsubscribe@gcc.gnu.org>
> >
> > To get messages 123 through 145 (a maximum of 100 per request), mail:
> > <gcc-get.123_145@gcc.gnu.org>
> >
> > To get an index with subject and author for messages 123-456 , mail:
> > <gcc-index.123_456@gcc.gnu.org>
> >
> > They are always returned as sets of 100, max 2000 per request,
> > so you'll actually get 100-499.
> >
> > To receive all messages with the same subject as message 12345,
> > send an empty message to:
> > <gcc-thread.12345@gcc.gnu.org>
> >
> > The messages do not really need to be empty, but I will ignore
> > their content. Only the ADDRESS you send to is important.
> >
> > You can start a subscription for an alternate address,
> > for example "john@host.domain", just add a hyphen and your
> > address (with '=' instead of '@') after the command word:
> > <gcc-subscribe-john=host.domain@gcc.gnu.org>
> >
> > To stop subscription for this address, mail:
> > <gcc-unsubscribe-john=host.domain@gcc.gnu.org>
> >
> > In both cases, I'll send a confirmation message to that address. When
> > you receive it, simply reply to it to complete your subscription.
> >
> > If despite following these instructions, you do not get the
> > desired results, please contact my owner at
> > gcc-owner@gcc.gnu.org. Please be patient, my owner is a
> > lot slower than I am ;-)
> >
> > --- Enclosed is a copy of the request I received.
> >
> > Return-Path: <anonymous@sourceware.org>
> > Received: (qmail 74432 invoked by uid 48); 6 Nov 2019 09:54:07 -0000
> > Message-ID: <20191106095407.74430.qmail@sourceware.org>
> > From: anonymous@sourceware.org
> > Date: Wed, 06 Nov 2019 09:54:07 +0000
> > To: gcc-unsubscribe-cnzhangquan=gmail.com@sourceware.org
> > User-Agent: Heirloom mailx 12.4 7/29/08
> > MIME-Version: 1.0
> > Content-Type: text/plain; charset=us-ascii
> > Content-Transfer-Encoding: 7bit
> >
> >
> >
>
> --00000000000048eb1a0596aa8d07
> Content-Type: text/html; charset="UTF-8"
> Content-Transfer-Encoding: quoted-printable
>
> <div dir=3D"ltr"><br></div><br><div class=3D"gmail_quote"><div dir=3D"ltr"
> =
> class=3D"gmail_attr">On Wed, Nov 6, 2019 at 5:54 PM <<a href=3D"mailto:
> g=
> cc-help@gcc.gnu.org">gcc-help@gcc.gnu.org</a>>
> wrote:<br></div><blockquo=
> te class=3D"gmail_quote" style=3D"margin:0px 0px 0px 0.8ex;border-left:1px
> =
> solid rgb(204,204,204);padding-left:1ex">Hi! This is the ezmlm program.
> I&#=
> 39;m managing the<br>
> <a href=3D"mailto:gcc@gcc.gnu.org" target=3D"_blank">gcc@gcc.gnu.org</a>
> ma=
> iling list.<br>
> <br>
> To confirm that you would like<br>
> <br>
> =C2=A0 =C2=A0<a href=3D"mailto:cnzhangquan@gmail.com"
> target=3D"_blank">cnz=
> hangquan@gmail.com</a><br>
> <br>
> removed from the gcc mailing list, please send an empty reply <br>
> to this address:<br>
> <br>
> =C2=A0 =C2=A0gcc-uc.1573034047.heakfaekenkdmgjdjeik-cnzhangquan=3D<a href=
> =3D"mailto:gmail.com@gcc.gnu.org" target=3D"_blank">gmail.com@gcc.gnu.org
> </=
> a><br>
> <br>
> Usually, this happens when you just hit the "reply" button.<br>
> If this does not work, simply copy the address and paste it into<br>
> the "To:" field of a new message.<br>
> <br>
> I haven't checked whether your address is currently on the mailing
> list=
> .<br>
> To see what address you used to subscribe, look at the messages you are<br>
> receiving from the mailing list. Each message has your address hidden<br>
> inside its return path; for example, <a href=3D"mailto:mary@xdd.ff.com"
> tar=
> get=3D"_blank">mary@xdd.ff.com</a> receives messages<br>
> with return path: <gcc-return-<number>-mary=3D<a href=3D"mailto:
> xd=
> d.ff.com@gcc.gnu.org" target=3D"_blank">xdd.ff.com@gcc.gnu.org</a>.<br>
> <br>
> Some mail programs are broken and cannot handle long addresses. If you<br>
> cannot reply to this request, instead send a message to<br>
> <<a href=3D"mailto:gcc-request@gcc.gnu.org"
> target=3D"_blank">gcc-reques=
> t@gcc.gnu.org</a>> and put the entire address listed above<br>
> into the "Subject:" line.<br>
> <br>
> <br>
> --- Administrative commands for the gcc list ---<br>
> <br>
> I can handle administrative requests automatically. Please<br>
> do not send them to the list address! Instead, send<br>
> your message to the correct command address:<br>
> <br>
> To subscribe to the list, send a message to:<br>
> =C2=A0 =C2=A0<<a href=3D"mailto:gcc-subscribe@gcc.gnu.org"
> target=3D"_bl=
> ank">gcc-subscribe@gcc.gnu.org</a>><br>
> <br>
> To remove your address from the list, send a message to:<br>
> =C2=A0 =C2=A0<<a href=3D"mailto:gcc-unsubscribe@gcc.gnu.org"
> target=3D"_=
> blank">gcc-unsubscribe@gcc.gnu.org</a>><br>
> <br>
> Send mail to the following for info and FAQ for this list:<br>
> =C2=A0 =C2=A0<<a href=3D"mailto:gcc-info@gcc.gnu.org"
> target=3D"_blank">=
> gcc-info@gcc.gnu.org</a>><br>
> =C2=A0 =C2=A0<<a href=3D"mailto:gcc-faq@gcc.gnu.org"
> target=3D"_blank">g=
> cc-faq@gcc.gnu.org</a>><br>
> <br>
> Similar addresses exist for the digest list:<br>
> =C2=A0 =C2=A0<<a href=3D"mailto:gcc-digest-subscribe@gcc.gnu.org"
> target=
> =3D"_blank">gcc-digest-subscribe@gcc.gnu.org</a>><br>
> =C2=A0 =C2=A0<<a href=3D"mailto:gcc-digest-unsubscribe@gcc.gnu.org"
> targ=
> et=3D"_blank">gcc-digest-unsubscribe@gcc.gnu.org</a>><br>
> <br>
> To get messages 123 through 145 (a maximum of 100 per request), mail:<br>
> =C2=A0 =C2=A0<<a href=3D"mailto:gcc-get.123_145@gcc.gnu.org"
> target=3D"_=
> blank">gcc-get.123_145@gcc.gnu.org</a>><br>
> <br>
> To get an index with subject and author for messages 123-456 , mail:<br>
> =C2=A0 =C2=A0<<a href=3D"mailto:gcc-index.123_456@gcc.gnu.org"
> target=3D=
> "_blank">gcc-index.123_456@gcc.gnu.org</a>><br>
> <br>
> They are always returned as sets of 100, max 2000 per request,<br>
> so you'll actually get 100-499.<br>
> <br>
> To receive all messages with the same subject as message 12345,<br>
> send an empty message to:<br>
> =C2=A0 =C2=A0<<a href=3D"mailto:gcc-thread.12345@gcc.gnu.org"
> target=3D"=
> _blank">gcc-thread.12345@gcc.gnu.org</a>><br>
> <br>
> The messages do not really need to be empty, but I will ignore<br>
> their content. Only the ADDRESS you send to is important.<br>
> <br>
> You can start a subscription for an alternate address,<br>
> for example "john@host.domain", just add a hyphen and your<br>
> address (with '=3D' instead of '@') after the command
> word:=
> <br>
> <gcc-subscribe-john=3D<a href=3D"mailto:host.domain@gcc.gnu.org"
> target=
> =3D"_blank">host.domain@gcc.gnu.org</a>><br>
> <br>
> To stop subscription for this address, mail:<br>
> <gcc-unsubscribe-john=3D<a href=3D"mailto:host.domain@gcc.gnu.org"
> targe=
> t=3D"_blank">host.domain@gcc.gnu.org</a>><br>
> <br>
> In both cases, I'll send a confirmation message to that address.
> When<b=
> r>
> you receive it, simply reply to it to complete your subscription.<br>
> <br>
> If despite following these instructions, you do not get the<br>
> desired results, please contact my owner at<br>
> <a href=3D"mailto:gcc-owner@gcc.gnu.org" target=3D"_blank">
> gcc-owner@gcc.gn=
> u.org</a>. Please be patient, my owner is a<br>
> lot slower than I am ;-)<br>
> <br>
> --- Enclosed is a copy of the request I received.<br>
> <br>
> Return-Path: <<a href=3D"mailto:anonymous@sourceware.org"
> target=3D"_bla=
> nk">anonymous@sourceware.org</a>><br>
> Received: (qmail 74432 invoked by uid 48); 6 Nov 2019 09:54:07 -0000<br>
> Message-ID: <<a href=3D"mailto:
> 20191106095407.74430.qmail@sourceware.org=
> " target=3D"_blank">20191106095407.74430.qmail@sourceware.org</a>><br>
> From: <a href=3D"mailto:anonymous@sourceware.org"
> target=3D"_blank">anonymo=
> us@sourceware.org</a><br>
> Date: Wed, 06 Nov 2019 09:54:07 +0000<br>
> To: gcc-unsubscribe-cnzhangquan=3D<a href=3D"mailto:
> gmail.com@sourceware.or=
> g" target=3D"_blank">gmail.com@sourceware.org</a><br>
> User-Agent: Heirloom mailx 12.4 7/29/08<br>
> MIME-Version: 1.0<br>
> Content-Type: text/plain; charset=3Dus-ascii<br>
> Content-Transfer-Encoding: 7bit<br>
> <br>
> <br>
> </blockquote></div>
>
> --00000000000048eb1a0596aa8d07--
>
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: ezmlm response
@ 2018-10-17 8:39 jfb
0 siblings, 0 replies; 25+ messages in thread
From: jfb @ 2018-10-17 8:39 UTC (permalink / raw)
To: gcc-help
JF Bastien isn't at Google anymore.
For matters pertaining to Google, please contact: bradnelson@google.com
For personal matters, JF can be reached at: temporary-redirect@jfbastien.com
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: ezmlm response
[not found] <1375946192.24898.ezmlm@gcc.gnu.org>
@ 2013-08-08 7:18 ` zhaobin xv
0 siblings, 0 replies; 25+ messages in thread
From: zhaobin xv @ 2013-08-08 7:18 UTC (permalink / raw)
To: gcc-help
Hi
In linux/arch/arm/boot/
compressed/head.S:
#ifndef __ARM_ARCH_2__
/*
* Booting from Angel - need to enter SVC mode and disable
* FIQs/IRQs (numeric definitions from angel arm.h source).
* We only do this if we were in user mode on entry.
*/
mrs r2, cpsr @ get current mode
tst r2, #3 @ not user?
bne not_angel
mov r0, #0x17 @ angel_SWIreason_EnterSVC
swi 0x123456 @ angel_SWI_ARM
I don't know what the"__ARM_ARCH_2__" mean?
"__ARM_ARCH_2__" is definded by gcc or definded byarmlinux?
where does it come from? what does it want to do?
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: ezmlm response
[not found] ` <1065199263.3f7da69fd525d@www.nexusmail.uwaterloo.ca>
@ 2003-10-06 19:36 ` y2bismil
0 siblings, 0 replies; 25+ messages in thread
From: y2bismil @ 2003-10-06 19:36 UTC (permalink / raw)
To: gcc-help
Hi all,
I'm not sure if this should be directed to a cygwin group, so let me know if u
think that's best. I'm getting the following error:
usr/include/cygwin/if.h:79: 'caddr_t' is used as a type, but is not defined as
a type.
Now, from what I've read, simply declaring c_addr_t as a char* should solve the
problem. I've searched the include dirs and could not find a definition of
caddr_t anywhere. Anyone know where this declaration normally occurs?
Thanks,
Yamin
----------------------------------------
This mail sent through www.mywaterloo.ca
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: ezmlm response
[not found] <1025311624.26082.ezmlm@gcc.gnu.org>
@ 2002-06-28 18:01 ` sun
0 siblings, 0 replies; 25+ messages in thread
From: sun @ 2002-06-28 18:01 UTC (permalink / raw)
To: gcc-help
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: ezmlm response
@ 2002-05-16 14:38 Gabriel Dos Reis
0 siblings, 0 replies; 25+ messages in thread
From: Gabriel Dos Reis @ 2002-05-16 14:38 UTC (permalink / raw)
To: gcc-help
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: ezmlm response
@ 2001-12-16 18:36 joseph.wk.lau
0 siblings, 0 replies; 25+ messages in thread
From: joseph.wk.lau @ 2001-12-16 18:36 UTC (permalink / raw)
To: gcc-help
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: ezmlm response
@ 2001-08-23 9:00 Marcus A Martin
0 siblings, 0 replies; 25+ messages in thread
From: Marcus A Martin @ 2001-08-23 9:00 UTC (permalink / raw)
To: gcc-help
8/23/2001 11:59:58 AM, gcc-help@gcc.gnu.org wrote:
>Hi! This is the ezmlm program. I'm managing the
>gcc@gcc.gnu.org mailing list.
>
>Acknowledgment: The address
>
> shalidor@cfl.rr.com
>
>was not on the gcc mailing list when I received
>your request and is not a subscriber of this list.
>
>If you unsubscribe, but continue to receive mail, you're subscribed
>under a different address than you currently use. Please look at the
>header for:
>
>'Return-Path: <gcc-return-1234-user=host.dom@gcc.gnu.org>'
>
>The unsubscribe address for this user would be:
>'gcc-unsubscribe-user=host.dom@gcc.gnu.org'.
>Just mail to that address, substituting user=host.dom for the real
>values, reply to the confirmation request, and you should receive a message
>that you're off the list.
>
>For some mail programs, you need to make the headers visible to
>see the return path:
>
>For Eudora 4.0, click on the "Blah blah ..." button.
>For PMMail, click on "Window->Show entire message/header".
>
>If this still doesn't work, I'm sorry to say that I can't help you.
>Please FORWARD a list message together with a note about what you're
>trying to achieve and a list of addresses that you might be subscribed
>under to my owner:
>
> gcc-owner@gcc.gnu.org
>
>who will take care of it. My owner is a little bit slower than I am,
>so please be patient.
>
>
>--- Administrative commands for the gcc list ---
>
>I can handle administrative requests automatically. Please
>do not send them to the list address! Instead, send
>your message to the correct command address:
>
>To subscribe to the list, send a message to:
> <gcc-subscribe@gcc.gnu.org>
>
>To remove your address from the list, send a message to:
> <gcc-unsubscribe@gcc.gnu.org>
>
>Send mail to the following for info and FAQ for this list:
> <gcc-info@gcc.gnu.org>
> <gcc-faq@gcc.gnu.org>
>
>Similar addresses exist for the digest list:
> <gcc-digest-subscribe@gcc.gnu.org>
> <gcc-digest-unsubscribe@gcc.gnu.org>
>
>To get messages 123 through 145 (a maximum of 100 per request), mail:
> <gcc-get.123_145@gcc.gnu.org>
>
>To get an index with subject and author for messages 123-456 , mail:
> <gcc-index.123_456@gcc.gnu.org>
>
>They are always returned as sets of 100, max 2000 per request,
>so you'll actually get 100-499.
>
>To receive all messages with the same subject as message 12345,
>send an empty message to:
> <gcc-thread.12345@gcc.gnu.org>
>
>The messages do not really need to be empty, but I will ignore
>their content. Only the ADDRESS you send to is important.
>
>You can start a subscription for an alternate address,
>for example "john@host.domain", just add a hyphen and your
>address (with '=' instead of '@') after the command word:
><gcc-subscribe-john=host.domain@gcc.gnu.org>
>
>To stop subscription for this address, mail:
><gcc-unsubscribe-john=host.domain@gcc.gnu.org>
>
>In both cases, I'll send a confirmation message to that address. When
>you receive it, simply reply to it to complete your subscription.
>
>If despite following these instructions, you do not get the
>desired results, please contact my owner at
>gcc-owner@gcc.gnu.org. Please be patient, my owner is a
>lot slower than I am ;-)
>
>--- Enclosed is a copy of the request I received.
>
>Return-Path: <shalidor@cfl.rr.com>
>Received: (qmail 32243 invoked from network); 23 Aug 2001 15:59:58 -0000
>Received: from unknown (HELO orllnx02.orl.rbd.com) (208.61.212.238)
> by sourceware.cygnus.com with SMTP; 23 Aug 2001 15:59:58 -0000
>Received: (qmail 31978 invoked from network); 23 Aug 2001 15:59:57 -0000
>Received: from unknown (HELO developer) (208.61.212.243)
> by orllnx01.orl.rbd.com with SMTP; 23 Aug 2001 15:59:57 -0000
>Date: Thu, 23 Aug 2001 11:56:34 -0400
>To: gcc-uc.998582360.dindamoaicfjcjdmanko-shalidor=cfl.rr.com@gcc.gnu.org
>From: Marcus A Martin <shalidor@cfl.rr.com>
>Subject: Re: confirm unsubscribe from gcc@gcc.gnu.org
>Reply-To: shalidor@cfl.rr.com
>X-Mailer: Opera 5.12 build 932
>X-Priority: 3 (Normal)
>Mime-Version: 1.0
>Content-Type: text/plain; charset="us-ascii"
>
>8/23/2001 11:59:20 AM, gcc-help@gcc.gnu.org wrote:
>
>>Hi! This is the ezmlm program. I'm managing the
>>gcc@gcc.gnu.org mailing list.
>>
>>To confirm that you would like
>>
>> shalidor@cfl.rr.com
>>
>>removed from the gcc mailing list, please send an empty reply
>>to this address:
>>
>> gcc-uc.998582360.dindamoaicfjcjdmanko-shalidor=cfl.rr.com@gcc.gnu.org
>>
>>Usually, this happens when you just hit the "reply" button.
>>If this does not work, simply copy the address and paste it into
>>the "To:" field of a new message.
>>
>>I haven't checked whether your address is currently on the mailing list.
>>To see what address you used to subscribe, look at the messages you are
>>receiving from the mailing list. Each message has your address hidden
>>inside its return path; for example, mary@xdd.ff.com receives messages
>>with return path: <gcc-return-<number>-mary=xdd.ff.com@gcc.gnu.org.
>>
>>Some mail programs are broken and cannot handle long addresses. If you
>>cannot reply to this request, instead send a message to
>><gcc-request@gcc.gnu.org> and put the entire address listed above
>>into the "Subject:" line.
>>
>>
>>--- Administrative commands for the gcc list ---
>>
>>I can handle administrative requests automatically. Please
>>do not send them to the list address! Instead, send
>>your message to the correct command address:
>>
>>To subscribe to the list, send a message to:
>> <gcc-subscribe@gcc.gnu.org>
>>
>>To remove your address from the list, send a message to:
>> <gcc-unsubscribe@gcc.gnu.org>
>>
>>Send mail to the following for info and FAQ for this list:
>> <gcc-info@gcc.gnu.org>
>> <gcc-faq@gcc.gnu.org>
>>
>>Similar addresses exist for the digest list:
>> <gcc-digest-subscribe@gcc.gnu.org>
>> <gcc-digest-unsubscribe@gcc.gnu.org>
>>
>>To get messages 123 through 145 (a maximum of 100 per request), mail:
>> <gcc-get.123_145@gcc.gnu.org>
>>
>>To get an index with subject and author for messages 123-456 , mail:
>> <gcc-index.123_456@gcc.gnu.org>
>>
>>They are always returned as sets of 100, max 2000 per request,
>>so you'll actually get 100-499.
>>
>>To receive all messages with the same subject as message 12345,
>>send an empty message to:
>> <gcc-thread.12345@gcc.gnu.org>
>>
>>The messages do not really need to be empty, but I will ignore
>>their content. Only the ADDRESS you send to is important.
>>
>>You can start a subscription for an alternate address,
>>for example "john@host.domain", just add a hyphen and your
>>address (with '=' instead of '@') after the command word:
>><gcc-subscribe-john=host.domain@gcc.gnu.org>
>>
>>To stop subscription for this address, mail:
>><gcc-unsubscribe-john=host.domain@gcc.gnu.org>
>>
>>In both cases, I'll send a confirmation message to that address. When
>>you receive it, simply reply to it to complete your subscription.
>>
>>If despite following these instructions, you do not get the
>>desired results, please contact my owner at
>>gcc-owner@gcc.gnu.org. Please be patient, my owner is a
>>lot slower than I am ;-)
>>
>>--- Enclosed is a copy of the request I received.
>>
>>Return-Path: <anonymous@gcc.gnu.org>
>>Received: (qmail 31973 invoked by uid 61); 23 Aug 2001 15:59:20 -0000
>>Date: 23 Aug 2001 15:59:20 -0000
>>Message-ID: <20010823155920.31972.qmail@sourceware.cygnus.com>
>>From: anonymous@gcc.gnu.org
>>To: gcc-unsubscribe-shalidor=cfl.rr.com@gcc.gnu.org
>>
>>
>>
>
>
>
>
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: ezmlm response
[not found] <982836759.12385.ezmlm@gcc.gnu.org>
@ 2001-02-22 4:25 ` Herman Pool
0 siblings, 0 replies; 25+ messages in thread
From: Herman Pool @ 2001-02-22 4:25 UTC (permalink / raw)
To: gcc-help
Herman Pool
Rotaform Database Services
tel: +31 (0)320 286488
----- Original Message -----
From: <gcc-help@gcc.gnu.org>
To: <h.pool@rotaform.nl>
Sent: Thursday, February 22, 2001 11:12 AM
Subject: ezmlm response
> Hi! This is the ezmlm program. I'm managing the
> gcc@gcc.gnu.org mailing list.
>
> Acknowledgment: The address
>
> h.pool@rotaform.nl
>
> was not on the gcc mailing list when I received
> your request and is not a subscriber of this list.
>
> If you unsubscribe, but continue to receive mail, you're subscribed
> under a different address than you currently use. Please look at the
> header for:
>
> 'Return-Path: <gcc-return-1234-user=host.dom@gcc.gnu.org>'
>
> The unsubscribe address for this user would be:
> 'gcc-unsubscribe-user=host.dom@gcc.gnu.org'.
> Just mail to that address, substituting user=host.dom for the real
> values, reply to the confirmation request, and you should receive a
message
> that you're off the list.
>
> For some mail programs, you need to make the headers visible to
> see the return path:
>
> For Eudora 4.0, click on the "Blah blah ..." button.
> For PMMail, click on "Window->Show entire message/header".
>
> If this still doesn't work, I'm sorry to say that I can't help you.
> Please FORWARD a list message together with a note about what you're
> trying to achieve and a list of addresses that you might be subscribed
> under to my owner:
>
> gcc-owner@gcc.gnu.org
>
> who will take care of it. My owner is a little bit slower than I am,
> so please be patient.
>
>
> --- Administrative commands for the gcc list ---
>
> I can handle administrative requests automatically. Please
> do not send them to the list address! Instead, send
> your message to the correct command address:
>
> To subscribe to the list, send a message to:
> <gcc-subscribe@gcc.gnu.org>
>
> To remove your address from the list, send a message to:
> <gcc-unsubscribe@gcc.gnu.org>
>
> Send mail to the following for info and FAQ for this list:
> <gcc-info@gcc.gnu.org>
> <gcc-faq@gcc.gnu.org>
>
> Similar addresses exist for the digest list:
> <gcc-digest-subscribe@gcc.gnu.org>
> <gcc-digest-unsubscribe@gcc.gnu.org>
>
> To get messages 123 through 145 (a maximum of 100 per request), mail:
> <gcc-get.123_145@gcc.gnu.org>
>
> To get an index with subject and author for messages 123-456 , mail:
> <gcc-index.123_456@gcc.gnu.org>
>
> They are always returned as sets of 100, max 2000 per request,
> so you'll actually get 100-499.
>
> To receive all messages with the same subject as message 12345,
> send an empty message to:
> <gcc-thread.12345@gcc.gnu.org>
>
> The messages do not really need to be empty, but I will ignore
> their content. Only the ADDRESS you send to is important.
>
> You can start a subscription for an alternate address,
> for example "john@host.domain", just add a hyphen and your
> address (with '=' instead of '@') after the command word:
> <gcc-subscribe-john=host.domain@gcc.gnu.org>
>
> To stop subscription for this address, mail:
> <gcc-unsubscribe-john=host.domain@gcc.gnu.org>
>
> In both cases, I'll send a confirmation message to that address. When
> you receive it, simply reply to it to complete your subscription.
>
> If despite following these instructions, you do not get the
> desired results, please contact my owner at
> gcc-owner@gcc.gnu.org. Please be patient, my owner is a
> lot slower than I am ;-)
>
> --- Enclosed is a copy of the request I received.
>
> Return-Path: <h.pool@rotaform.nl>
> Received: (qmail 12379 invoked from network); 22 Feb 2001 10:12:38 -0000
> Received: from rotai4.rotaform.nl (HELO rotai7.rotaform.nl) (195.108.85.4)
> by sourceware.cygnus.com with SMTP; 22 Feb 2001 10:12:38 -0000
> Received: from dbs088 ([192.168.10.93]) by rotai7.rotaform.nl
> (Netscape Messaging Server 3.5) with SMTP id 230
> for
<gcc-uc.982832866.eeccgemafkflbkogjmig-h.pool=rotaform.nl@gcc.gnu.org>;
> Thu, 22 Feb 2001 11:11:59 +0100
> Message-ID: <00d301c09cae$cfc01b10$5d0aa8c0@dbs088>
> From: "Herman Pool" <h.pool@rotaform.nl>
> To:
> <gcc-uc.982832866.eeccgemafkflbkogjmig-h.pool=rotaform.nl@gcc.gnu.org>
> Subject:
> Date: Thu, 22 Feb 2001 10:06:58 +0100
> MIME-Version: 1.0
> Content-Type: multipart/alternative;
> boundary="----=_NextPart_000_00D0_01C09CB7.3162CA40"
> X-Priority: 3
> X-MSMail-Priority: Normal
> X-Mailer: Microsoft Outlook Express 5.00.2314.1300
> X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2314.1300
>
> This is a multi-part message in MIME format.
>
> ------=_NextPart_000_00D0_01C09CB7.3162CA40
> Content-Type: text/plain;
> charset="iso-8859-1"
> Content-Transfer-Encoding: quoted-printable
>
>
>
> ------=_NextPart_000_00D0_01C09CB7.3162CA40
> Content-Type: text/html;
> charset="iso-8859-1"
> Content-Transfer-Encoding: quoted-printable
>
> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
> <HTML><HEAD>
> <META content=3D"text/html; charset=3Diso-8859-1" =
> http-equiv=3DContent-Type>
> <META content=3D"MSHTML 5.00.2314.1000" name=3DGENERATOR>
> <STYLE></STYLE>
> </HEAD>
> <BODY bgColor=3D#ffffff> </BODY></HTML>
>
> ------=_NextPart_000_00D0_01C09CB7.3162CA40--
>
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: ezmlm response
[not found] <973655870.5734.ezmlm@gcc.gnu.org>
@ 2000-11-08 16:24 ` Pablo Hörtner
0 siblings, 0 replies; 25+ messages in thread
From: Pablo Hörtner @ 2000-11-08 16:24 UTC (permalink / raw)
To: gcc-help
----- Original Message -----
From: <gcc-help@gcc.gnu.org>
To: <pablo.hoertner@web.de>
Sent: Wednesday, November 08, 2000 4:57 AM
Subject: ezmlm response
> Hi! This is the ezmlm program. I'm managing the
> gcc@gcc.gnu.org mailing list.
>
> Acknowledgment: The address
>
> pablo.hoertner@web.de
>
> was not on the gcc mailing list when I received
> your request and is not a subscriber of this list.
>
> If you unsubscribe, but continue to receive mail, you're subscribed
> under a different address than you currently use. Please look at the
> header for:
>
> 'Return-Path: <gcc-return-1234-user=host.dom@gcc.gnu.org>'
>
> The unsubscribe address for this user would be:
> 'gcc-unsubscribe-user=host.dom@gcc.gnu.org'.
> Just mail to that address, substituting user=host.dom for the real
> values, reply to the confirmation request, and you should receive a
message
> that you're off the list.
>
> For some mail programs, you need to make the headers visible to
> see the return path:
>
> For Eudora 4.0, click on the "Blah blah ..." button.
> For PMMail, click on "Window->Show entire message/header".
>
> If this still doesn't work, I'm sorry to say that I can't help you.
> Please FORWARD a list message together with a note about what you're
> trying to achieve and a list of addresses that you might be subscribed
> under to my owner:
>
> gcc-owner@gcc.gnu.org
>
> who will take care of it. My owner is a little bit slower than I am,
> so please be patient.
>
>
> --- Administrative commands for the gcc list ---
>
> I can handle administrative requests automatically. Please
> do not send them to the list address! Instead, send
> your message to the correct command address:
>
> To subscribe to the list, send a message to:
> <gcc-subscribe@gcc.gnu.org>
>
> To remove your address from the list, send a message to:
> <gcc-unsubscribe@gcc.gnu.org>
>
> Send mail to the following for info and FAQ for this list:
> <gcc-info@gcc.gnu.org>
> <gcc-faq@gcc.gnu.org>
>
> Similar addresses exist for the digest list:
> <gcc-digest-subscribe@gcc.gnu.org>
> <gcc-digest-unsubscribe@gcc.gnu.org>
>
> To get messages 123 through 145 (a maximum of 100 per request), mail:
> <gcc-get.123_145@gcc.gnu.org>
>
> To get an index with subject and author for messages 123-456 , mail:
> <gcc-index.123_456@gcc.gnu.org>
>
> They are always returned as sets of 100, max 2000 per request,
> so you'll actually get 100-499.
>
> To receive all messages with the same subject as message 12345,
> send an empty message to:
> <gcc-thread.12345@gcc.gnu.org>
>
> The messages do not really need to be empty, but I will ignore
> their content. Only the ADDRESS you send to is important.
>
> You can start a subscription for an alternate address,
> for example "john@host.domain", just add a hyphen and your
> address (with '=' instead of '@') after the command word:
> <gcc-subscribe-john=host.domain@gcc.gnu.org>
>
> To stop subscription for this address, mail:
> <gcc-unsubscribe-john=host.domain@gcc.gnu.org>
>
> In both cases, I'll send a confirmation message to that address. When
> you receive it, simply reply to it to complete your subscription.
>
> If despite following these instructions, you do not get the
> desired results, please contact my owner at
> gcc-owner@gcc.gnu.org. Please be patient, my owner is a
> lot slower than I am ;-)
>
> --- Enclosed is a copy of the request I received.
>
> Return-Path: <pablo.hoertner@web.de>
> Received: (qmail 5725 invoked from network); 8 Nov 2000 03:57:47 -0000
> Received: from pop3.web.de (HELO smtp.web.de) (212.227.116.81)
> by sourceware.cygnus.com with SMTP; 8 Nov 2000 03:57:47 -0000
> Received: from pablo1 by smtp.web.de with smtp
> (freemail 4.2.1.0 #10) id m13tMMp-005CBlC; Wed, 8 Nov 2000 04:57 +0100
> Message-ID: <00d001c04938$078c3800$1ec398d4@pablo1>
> From: =?iso-8859-1?Q?Pablo_H=F6rtner?= <pablo.hoertner@web.de>
> To:
<gcc-uc.973585639.gkbdfomgookhhhebjkih-pablo.hoertner=web.de@gcc.gnu.org>
> Subject:
> Date: Wed, 8 Nov 2000 00:25:59 +0100
> MIME-Version: 1.0
> Content-Type: text/plain;
> charset="iso-8859-1"
> Content-Transfer-Encoding: 7bit
> X-Priority: 3
> X-MSMail-Priority: Normal
> X-Mailer: Microsoft Outlook Express 5.50.4133.2400
> Disposition-Notification-To: =?iso-8859-1?Q?Pablo_H=F6rtner?=
<pablo.hoertner@web.de>
> X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400
>
>
>
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: ezmlm response
2000-09-16 22:38 ` Sunjay Bhatnagar
@ 2000-09-17 16:38 ` Alexandre Oliva
0 siblings, 0 replies; 25+ messages in thread
From: Alexandre Oliva @ 2000-09-17 16:38 UTC (permalink / raw)
To: Sunjay Bhatnagar; +Cc: gcc-help
On Sep 17, 2000, Sunjay Bhatnagar <sanjay@ncra.tifr.res.in> wrote:
> I wrote to you asking if my mail reached
> egcs-bugs@sourceware.cygnus.com, and you wrote that you did not see
> it. Could you please explain what's going on?
The e-mail address @sourceware.cygnus.com is wrong. The mailing list
has moved. Use gcc-bugs@gcc.gnu.org.
--
Alexandre Oliva Enjoy Guarana', see http://www.ic.unicamp.br/~oliva/
Red Hat GCC Developer aoliva@{cygnus.com, redhat.com}
CS PhD student at IC-Unicamp oliva@{lsd.ic.unicamp.br, gnu.org}
Free Software Evangelist *Please* write to mailing lists, not to me
^ permalink raw reply [flat|nested] 25+ messages in thread
* ezmlm response
[not found] <969168460.8561.ezmlm@gcc.gnu.org>
@ 2000-09-16 22:38 ` Sunjay Bhatnagar
2000-09-17 16:38 ` Alexandre Oliva
0 siblings, 1 reply; 25+ messages in thread
From: Sunjay Bhatnagar @ 2000-09-16 22:38 UTC (permalink / raw)
To: gcc-help
Hi,
Everytime I mail to egcs-bugs@sourceware.cygnus.com I get this
message.
I wrote to you asking if my mail reached
egcs-bugs@sourceware.cygnus.com, and you wrote that you did not see
it. Could you please explain what's going on? I just want to submit
a GCC bug report and not get onto and of the gcc-help lines (your last
mail said (rather cryptically!) that I need not get on to gcc-help...)
but then why am I getting (automatic) reply from gcc@gcc.gnu.org.
More over the reply talks about all gcc related mailing list except
egcs-bugs list.
I am attaching the ENTIRE reply that I got in responce of my mail to
egcs-bugs@sourceware.cygnus.com which also is part of the reply and
attached herewith.
Regards,
sanjay
gcc-help@gcc.gnu.org writes:
>Hi! This is the ezmlm program. I'm managing the
>gcc@gcc.gnu.org mailing list.
>
>This is a generic help message. The message I received wasn't sent to
>any of my command addresses.
>
>
>--- Administrative commands for the gcc list ---
>
>I can handle administrative requests automatically. Please
>do not send them to the list address! Instead, send
>your message to the correct command address:
>
>To subscribe to the list, send a message to:
> <gcc-subscribe@gcc.gnu.org>
>
>To remove your address from the list, send a message to:
> <gcc-unsubscribe@gcc.gnu.org>
>
>Send mail to the following for info and FAQ for this list:
> <gcc-info@gcc.gnu.org>
> <gcc-faq@gcc.gnu.org>
>
>Similar addresses exist for the digest list:
> <gcc-digest-subscribe@gcc.gnu.org>
> <gcc-digest-unsubscribe@gcc.gnu.org>
>
>To get messages 123 through 145 (a maximum of 100 per request), mail:
> <gcc-get.123_145@gcc.gnu.org>
>
>To get an index with subject and author for messages 123-456 , mail:
> <gcc-index.123_456@gcc.gnu.org>
>
>They are always returned as sets of 100, max 2000 per request,
>so you'll actually get 100-499.
>
>To receive all messages with the same subject as message 12345,
>send an empty message to:
> <gcc-thread.12345@gcc.gnu.org>
>
>The messages do not really need to be empty, but I will ignore
>their content. Only the ADDRESS you send to is important.
>
>You can start a subscription for an alternate address,
>for example "john@host.domain", just add a hyphen and your
>address (with '=' instead of '@') after the command word:
><gcc-subscribe-john=host.domain@gcc.gnu.org>
>
>To stop subscription for this address, mail:
><gcc-unsubscribe-john=host.domain@gcc.gnu.org>
>
>In both cases, I'll send a confirmation message to that address. When
>you receive it, simply reply to it to complete your subscription.
>
>If despite following these instructions, you do not get the
>desired results, please contact my owner at
>gcc-owner@gcc.gnu.org. Please be patient, my owner is a
>lot slower than I am ;-)
>
>--- Enclosed is a copy of the request I received.
>
>Return-Path: <sanjay@ncra.tifr.res.in>
>Received: (qmail 8550 invoked from network); 17 Sep 2000 05:27:19 -0000
>Received: from tula.ncra.tifr.res.in (158.144.12.2)
> by sourceware.cygnus.com with SMTP; 17 Sep 2000 05:27:19 -0000
>Received: (from sanjay@localhost) by tula.ncra.tifr.res.in (950413.SGI.8.6.12/950213.SGI.AUTOCF) id KAA11833; Sun, 17 Sep 2000 10:56:13 +0530
>Date: Sun, 17 Sep 2000 10:56:13 +0530
>Message-Id: <200009170526.KAA11833@tula.ncra.tifr.res.in>
>From: Sunjay Bhatnagar <sanjay@ncra.tifr.res.in>
>To: egcs-bugs@sourceware.cygnus.com, sanjay@ncra.tifr.res.in
>Subject: Bug report - compiled code gives seg. fault
>
>
>Hi,
>
>I have a simple code which allocates static memory. The code is as
>follows (file "xxx.c"):
>
> #include <stdio.h>
> #include <string.h>
> #include <math.h>
> #include <stdlib.h>
>
> #define MAX_DATA_LEN 60000
> #define MAX_COLUMN_NOS 120
>
> int main(int argc, char **argv)
> {
> char line[2001], *strptr;
> float data[MAX_DATA_LEN][MAX_COLUMN_NOS];
> float dat[MAX_DATA_LEN];
>
> float mean, rms, err, max, min;
> float sigma_max = 3.0, thresh;
>
> return 0;
> }
>
>
>The output of "gcc -E xxx.c >| xxx.e" is attached at the end of this
>message with blank lines removed from the output.
>
>Details of the problem:
>----------------------
>
>(1) OS Used: RedHat 6.2 distribution of GNU/Linux
>
>(2) Compiler used:
>
> Reading specs from /usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/specs
> gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)
>
>(3) Symptoms of the problem:
>
> (a) The compiled program gives a segmentation fault
>
> (b) If the code is compiled with -O2, there is no segementation
> fault
>
> (c) If MAX_DATA_LEN in the above code is reduced to about 1700 or
> so (exact number not know but reducing helps is known), the
> problem disappears
>
> (d) It's reported that this problem does not appear on Mandrake's
> latest distribution of GNU/Linux using the same version of GCC
>
> (e) If sigma_max in the above code is not initialized during it's
> decleration is, the problem disappears
>
> (f) If sigma_max is made static, the problem disappears
>
>
>Could some one tell me if this is a bug in GCC of there is something
>else that's wrong?
>
>
>Regards,
>sanjay
>
>
>-----------------------------Exploded code--------------------------
># 1 "xxx.c"
># 1 "/usr/include/stdio.h" 1 3
># 1 "/usr/include/features.h" 1 3
># 138 "/usr/include/features.h" 3
># 196 "/usr/include/features.h" 3
># 1 "/usr/include/sys/cdefs.h" 1 3
># 71 "/usr/include/sys/cdefs.h" 3
># 103 "/usr/include/sys/cdefs.h" 3
># 250 "/usr/include/features.h" 2 3
># 1 "/usr/include/gnu/stubs.h" 1 3
># 278 "/usr/include/features.h" 2 3
># 27 "/usr/include/stdio.h" 2 3
># 1 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 1 3
># 19 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 61 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 131 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
>typedef unsigned int size_t;
># 271 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 283 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 317 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 33 "/usr/include/stdio.h" 2 3
># 1 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stdarg.h" 1 3
>typedef void *__gnuc_va_list;
># 116 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stdarg.h" 3
># 202 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stdarg.h" 3
># 38 "/usr/include/stdio.h" 2 3
># 1 "/usr/include/bits/types.h" 1 3
># 1 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 1 3
># 19 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 61 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 131 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 188 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 271 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 283 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 317 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 29 "/usr/include/bits/types.h" 2 3
>typedef unsigned char __u_char;
>typedef unsigned short __u_short;
>typedef unsigned int __u_int;
>typedef unsigned long __u_long;
>__extension__ typedef unsigned long long int __u_quad_t;
>__extension__ typedef long long int __quad_t;
># 48 "/usr/include/bits/types.h" 3
>typedef signed char __int8_t;
>typedef unsigned char __uint8_t;
>typedef signed short int __int16_t;
>typedef unsigned short int __uint16_t;
>typedef signed int __int32_t;
>typedef unsigned int __uint32_t;
>__extension__ typedef signed long long int __int64_t;
>__extension__ typedef unsigned long long int __uint64_t;
>typedef __quad_t *__qaddr_t;
>typedef __u_quad_t __dev_t;
>typedef __u_int __uid_t;
>typedef __u_int __gid_t;
>typedef __u_long __ino_t;
>typedef __u_int __mode_t;
>typedef __u_int __nlink_t;
>typedef long int __off_t;
>typedef __quad_t __loff_t;
>typedef int __pid_t;
>typedef int __ssize_t;
>typedef long int __rlim_t;
>typedef __quad_t __rlim64_t;
>typedef __u_int __id_t;
>typedef struct
> {
> int __val[2];
> } __fsid_t;
>typedef int __daddr_t;
>typedef char *__caddr_t;
>typedef long int __time_t;
>typedef long int __swblk_t;
>\f
>typedef long int __clock_t;
>typedef unsigned long int __fd_mask;
>typedef struct
> {
> __fd_mask __fds_bits[1024 / (8 * sizeof (__fd_mask)) ];
> } __fd_set;
>typedef int __key_t;
>typedef unsigned short int __ipc_pid_t;
>typedef long int __blkcnt_t;
>typedef __quad_t __blkcnt64_t;
>typedef __u_long __fsblkcnt_t;
>typedef __u_quad_t __fsblkcnt64_t;
>typedef __u_long __fsfilcnt_t;
>typedef __u_quad_t __fsfilcnt64_t;
>typedef __u_long __ino64_t;
>typedef __loff_t __off64_t;
>typedef long int __t_scalar_t;
>typedef unsigned long int __t_uscalar_t;
>typedef int __intptr_t;
># 40 "/usr/include/stdio.h" 2 3
>typedef struct _IO_FILE FILE;
># 1 "/usr/include/libio.h" 1 3
># 1 "/usr/include/_G_config.h" 1 3
># 1 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 1 3
># 19 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 61 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 131 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 188 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
>typedef long int wchar_t;
>typedef unsigned int wint_t;
># 317 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 14 "/usr/include/_G_config.h" 2 3
>typedef int _G_int16_t __attribute__ ((__mode__ (__HI__)));
>typedef int _G_int32_t __attribute__ ((__mode__ (__SI__)));
>typedef unsigned int _G_uint16_t __attribute__ ((__mode__ (__HI__)));
>typedef unsigned int _G_uint32_t __attribute__ ((__mode__ (__SI__)));
># 30 "/usr/include/libio.h" 2 3
># 1 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stdarg.h" 1 3
># 116 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stdarg.h" 3
># 202 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stdarg.h" 3
># 48 "/usr/include/libio.h" 2 3
># 67 "/usr/include/libio.h" 3
># 98 "/usr/include/libio.h" 3
>struct _IO_jump_t; struct _IO_FILE;
>typedef void _IO_lock_t;
>struct _IO_marker {
> struct _IO_marker *_next;
> struct _IO_FILE *_sbuf;
> int _pos;
># 186 "/usr/include/libio.h" 3
>};
>struct _IO_FILE {
> int _flags;
> char* _IO_read_ptr;
> char* _IO_read_end;
> char* _IO_read_base;
> char* _IO_write_base;
> char* _IO_write_ptr;
> char* _IO_write_end;
> char* _IO_buf_base;
> char* _IO_buf_end;
> char *_IO_save_base;
> char *_IO_backup_base;
> char *_IO_save_end;
> struct _IO_marker *_markers;
> struct _IO_FILE *_chain;
> int _fileno;
> int _blksize;
> __off_t _old_offset;
> unsigned short _cur_column;
> signed char _vtable_offset;
> char _shortbuf[1];
> _IO_lock_t *_lock;
> __off64_t _offset;
> int _unused2[16];
>};
>typedef struct _IO_FILE _IO_FILE;
>struct _IO_FILE_plus;
>extern struct _IO_FILE_plus _IO_2_1_stdin_;
>extern struct _IO_FILE_plus _IO_2_1_stdout_;
>extern struct _IO_FILE_plus _IO_2_1_stderr_;
>typedef __ssize_t __io_read_fn (void * __cookie, char *__buf,
> size_t __nbytes) ;
>typedef __ssize_t __io_write_fn (void * __cookie, __const char *__buf,
> size_t __n) ;
>typedef int __io_seek_fn (void * __cookie, __off_t __pos, int __w) ;
>typedef int __io_close_fn (void * __cookie) ;
># 311 "/usr/include/libio.h" 3
>extern int __underflow (_IO_FILE *) ;
>extern int __uflow (_IO_FILE *) ;
>extern int __overflow (_IO_FILE *, int) ;
>extern int _IO_getc (_IO_FILE *__fp) ;
>extern int _IO_putc (int __c, _IO_FILE *__fp) ;
>extern int _IO_feof (_IO_FILE *__fp) ;
>extern int _IO_ferror (_IO_FILE *__fp) ;
>extern int _IO_peekc_locked (_IO_FILE *__fp) ;
>extern void _IO_flockfile (_IO_FILE *) ;
>extern void _IO_funlockfile (_IO_FILE *) ;
>extern int _IO_ftrylockfile (_IO_FILE *) ;
>extern int _IO_vfscanf (_IO_FILE * , const char * ,
> __gnuc_va_list , int * ) ;
>extern int _IO_vfprintf (_IO_FILE * , const char * ,
> __gnuc_va_list ) ;
>extern __ssize_t _IO_padn (_IO_FILE *, int, __ssize_t ) ;
>extern size_t _IO_sgetn (_IO_FILE *, void *, size_t ) ;
>extern __off64_t _IO_seekoff (_IO_FILE *, __off64_t , int, int) ;
>extern __off64_t _IO_seekpos (_IO_FILE *, __off64_t , int) ;
>extern void _IO_free_backup_area (_IO_FILE *) ;
># 57 "/usr/include/stdio.h" 2 3
>typedef __off_t fpos_t;
># 1 "/usr/include/bits/stdio_lim.h" 1 3
># 110 "/usr/include/stdio.h" 2 3
>extern FILE *stdin;
>extern FILE *stdout;
>extern FILE *stderr;
>extern int remove (__const char *__filename) ;
>extern int rename (__const char *__old, __const char *__new) ;
>extern FILE *tmpfile (void) ;
>extern char *tmpnam (char *__s) ;
>extern char *tmpnam_r (char *__s) ;
>extern char *tempnam (__const char *__dir, __const char *__pfx) ;
>extern int fclose (FILE *__stream) ;
>extern int fflush (FILE *__stream) ;
>extern int fflush_unlocked (FILE *__stream) ;
>extern FILE *fopen (__const char * __filename,
> __const char * __modes) ;
>extern FILE *freopen (__const char * __filename,
> __const char * __modes,
> FILE * __stream) ;
># 201 "/usr/include/stdio.h" 3
>extern FILE *fdopen (int __fd, __const char *__modes) ;
># 227 "/usr/include/stdio.h" 3
>extern void setbuf (FILE * __stream, char * __buf) ;
>extern int setvbuf (FILE * __stream, char * __buf,
> int __modes, size_t __n) ;
>extern void setbuffer (FILE * __stream, char * __buf,
> size_t __size) ;
>extern void setlinebuf (FILE *__stream) ;
>extern int fprintf (FILE * __stream,
> __const char * __format, ...) ;
>extern int printf (__const char * __format, ...) ;
>extern int sprintf (char * __s,
> __const char * __format, ...) ;
>extern int vfprintf (FILE * __s,
> __const char * __format,
> __gnuc_va_list __arg) ;
>extern int vprintf (__const char * __format,
> __gnuc_va_list __arg) ;
>extern int vsprintf (char * __s,
> __const char * __format,
> __gnuc_va_list __arg) ;
>extern int snprintf (char * __s, size_t __maxlen,
> __const char * __format, ...)
> __attribute__ ((__format__ (__printf__, 3, 4)));
>extern int __vsnprintf (char * __s, size_t __maxlen,
> __const char * __format,
> __gnuc_va_list __arg)
> __attribute__ ((__format__ (__printf__, 3, 0)));
>extern int vsnprintf (char * __s, size_t __maxlen,
> __const char * __format,
> __gnuc_va_list __arg)
> __attribute__ ((__format__ (__printf__, 3, 0)));
># 306 "/usr/include/stdio.h" 3
>extern int fscanf (FILE * __stream,
> __const char * __format, ...) ;
>extern int scanf (__const char * __format, ...) ;
>extern int sscanf (__const char * __s,
> __const char * __format, ...) ;
># 334 "/usr/include/stdio.h" 3
>extern int fgetc (FILE *__stream) ;
>extern int getc (FILE *__stream) ;
>extern int getchar (void) ;
>extern int getc_unlocked (FILE *__stream) ;
>extern int getchar_unlocked (void) ;
>extern int fgetc_unlocked (FILE *__stream) ;
>extern int fputc (int __c, FILE *__stream) ;
>extern int putc (int __c, FILE *__stream) ;
>extern int putchar (int __c) ;
>extern int fputc_unlocked (int __c, FILE *__stream) ;
>extern int putc_unlocked (int __c, FILE *__stream) ;
>extern int putchar_unlocked (int __c) ;
>extern int getw (FILE *__stream) ;
>extern int putw (int __w, FILE *__stream) ;
>extern char *fgets (char * __s, int __n,
> FILE * __stream) ;
>extern char *gets (char *__s) ;
># 424 "/usr/include/stdio.h" 3
>extern int fputs (__const char * __s,
> FILE * __stream) ;
>extern int puts (__const char *__s) ;
>extern int ungetc (int __c, FILE *__stream) ;
>extern size_t fread (void * __ptr, size_t __size,
> size_t __n, FILE * __stream) ;
>extern size_t fwrite (__const void * __ptr, size_t __size,
> size_t __n, FILE * __s) ;
>extern size_t fread_unlocked (void * __ptr, size_t __size,
> size_t __n, FILE * __stream) ;
>extern size_t fwrite_unlocked (__const void * __ptr,
> size_t __size, size_t __n,
> FILE * __stream) ;
>extern int fseek (FILE *__stream, long int __off, int __whence) ;
>extern long int ftell (FILE *__stream) ;
>extern void rewind (FILE *__stream) ;
>typedef __off_t off_t;
>extern int fgetpos (FILE * __stream,
> fpos_t * __pos) ;
>extern int fsetpos (FILE *__stream, __const fpos_t *__pos) ;
># 523 "/usr/include/stdio.h" 3
># 533 "/usr/include/stdio.h" 3
>extern void clearerr (FILE *__stream) ;
>extern int feof (FILE *__stream) ;
>extern int ferror (FILE *__stream) ;
>extern void clearerr_unlocked (FILE *__stream) ;
>extern int feof_unlocked (FILE *__stream) ;
>extern int ferror_unlocked (FILE *__stream) ;
>extern void perror (__const char *__s) ;
>extern int sys_nerr;
>extern __const char *__const sys_errlist[];
>extern int fileno (FILE *__stream) ;
>extern int fileno_unlocked (FILE *__stream) ;
>extern FILE *popen (__const char *__command, __const char *__modes) ;
>extern int pclose (FILE *__stream) ;
>extern char *ctermid (char *__s) ;
># 607 "/usr/include/stdio.h" 3
>extern void flockfile (FILE *__stream) ;
>extern int ftrylockfile (FILE *__stream) ;
>extern void funlockfile (FILE *__stream) ;
># 1 "xxx.c" 2
># 1 "/usr/include/string.h" 1 3
># 1 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 1 3
># 19 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 61 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 131 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 188 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 271 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 283 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 317 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 33 "/usr/include/string.h" 2 3
>extern void * memcpy (void * __dest,
> __const void * __src, size_t __n) ;
>extern void * memmove (void * __dest, __const void * __src,
> size_t __n) ;
>extern void * memccpy (void * __dest, __const void * __src,
> int __c, size_t __n) ;
>extern void * memset (void * __s, int __c, size_t __n) ;
>extern int memcmp (__const void * __s1, __const void * __s2,
> size_t __n) ;
>extern void * memchr (__const void * __s, int __c, size_t __n) ;
>extern char *strcpy (char * __dest,
> __const char * __src) ;
>extern char *strncpy (char * __dest,
> __const char * __src, size_t __n) ;
>extern char *strcat (char * __dest,
> __const char * __src) ;
>extern char *strncat (char * __dest,
> __const char * __src, size_t __n) ;
>extern int strcmp (__const char *__s1, __const char *__s2) ;
>extern int strncmp (__const char *__s1, __const char *__s2, size_t __n) ;
>extern int strcoll (__const char *__s1, __const char *__s2) ;
>extern size_t strxfrm (char * __dest,
> __const char * __src, size_t __n) ;
># 107 "/usr/include/string.h" 3
>extern char *__strdup (__const char *__s) ;
>extern char *strdup (__const char *__s) ;
># 143 "/usr/include/string.h" 3
>extern char *strchr (__const char *__s, int __c) ;
>extern char *strrchr (__const char *__s, int __c) ;
>extern size_t strcspn (__const char *__s, __const char *__reject) ;
>extern size_t strspn (__const char *__s, __const char *__accept) ;
>extern char *strpbrk (__const char *__s, __const char *__accept) ;
>extern char *strstr (__const char *__haystack, __const char *__needle) ;
>extern char *strtok (char * __s,
> __const char * __delim) ;
>extern char *__strtok_r (char * __s,
> __const char * __delim,
> char ** __save_ptr) ;
>extern char *strtok_r (char * __s,
> __const char * __delim,
> char ** __save_ptr) ;
># 203 "/usr/include/string.h" 3
>extern size_t strlen (__const char *__s) ;
>extern char *strerror (int __errnum) ;
>extern char *__strerror_r (int __errnum, char *__buf, size_t __buflen) ;
>extern char *strerror_r (int __errnum, char *__buf, size_t __buflen) ;
>extern void __bzero (void * __s, size_t __n) ;
>extern void bcopy (__const void * __src, void * __dest, size_t __n) ;
>extern void bzero (void * __s, size_t __n) ;
>extern int bcmp (__const void * __s1, __const void * __s2, size_t __n) ;
>extern char *index (__const char *__s, int __c) ;
>extern char *rindex (__const char *__s, int __c) ;
>extern int __ffs (int __i) __attribute__ ((const));
>extern int ffs (int __i) __attribute__ ((const));
>extern int __strcasecmp (__const char *__s1, __const char *__s2) ;
>extern int strcasecmp (__const char *__s1, __const char *__s2) ;
>extern int strncasecmp (__const char *__s1, __const char *__s2,
> size_t __n) ;
># 277 "/usr/include/string.h" 3
>extern char *strsep (char ** __stringp,
> __const char * __delim) ;
># 319 "/usr/include/string.h" 3
># 347 "/usr/include/string.h" 3
># 2 "xxx.c" 2
># 1 "/usr/include/math.h" 1 3
># 1 "/usr/include/bits/huge_val.h" 1 3
># 68 "/usr/include/bits/huge_val.h" 3
># 33 "/usr/include/math.h" 2 3
># 1 "/usr/include/bits/mathdef.h" 1 3
># 47 "/usr/include/bits/mathdef.h" 3
># 40 "/usr/include/math.h" 2 3
># 1 "/usr/include/bits/mathcalls.h" 1 3
>extern double acos (double __x) ; extern double __acos (double __x) ;
>extern double asin (double __x) ; extern double __asin (double __x) ;
>extern double atan (double __x) ; extern double __atan (double __x) ;
>extern double atan2 (double __y, double __x) ; extern double __atan2 (double __y, double __x) ;
>extern double cos (double __x) ; extern double __cos (double __x) ;
>extern double sin (double __x) ; extern double __sin (double __x) ;
>extern double tan (double __x) ; extern double __tan (double __x) ;
>extern double cosh (double __x) ; extern double __cosh (double __x) ;
>extern double sinh (double __x) ; extern double __sinh (double __x) ;
>extern double tanh (double __x) ; extern double __tanh (double __x) ;
>extern double acosh (double __x) ; extern double __acosh (double __x) ;
>extern double asinh (double __x) ; extern double __asinh (double __x) ;
>extern double atanh (double __x) ; extern double __atanh (double __x) ;
>extern double exp (double __x) ; extern double __exp (double __x) ;
>extern double frexp (double __x, int *__exponent) ; extern double __frexp (double __x, int *__exponent) ;
>extern double ldexp (double __x, int __exponent) ; extern double __ldexp (double __x, int __exponent) ;
>extern double log (double __x) ; extern double __log (double __x) ;
>extern double log10 (double __x) ; extern double __log10 (double __x) ;
>extern double modf (double __x, double *__iptr) ; extern double __modf (double __x, double *__iptr) ;
>extern double expm1 (double __x) ; extern double __expm1 (double __x) ;
>extern double log1p (double __x) ; extern double __log1p (double __x) ;
>extern double logb (double __x) ; extern double __logb (double __x) ;
>extern double pow (double __x, double __y) ; extern double __pow (double __x, double __y) ;
>extern double sqrt (double __x) ; extern double __sqrt (double __x) ;
>extern double hypot (double __x, double __y) ; extern double __hypot (double __x, double __y) ;
>extern double cbrt (double __x) ; extern double __cbrt (double __x) ;
>extern double ceil (double __x) ; extern double __ceil (double __x) ;
>extern double fabs (double __x) __attribute__ ( (__const__) ); extern double __fabs (double __x) __attribute__ ( (__const__) ) ;
>extern double floor (double __x) ; extern double __floor (double __x) ;
>extern double fmod (double __x, double __y) ; extern double __fmod (double __x, double __y) ;
>extern int __isinf (double __value) __attribute__ ((__const__));
>extern int __finite (double __value) __attribute__ ((__const__));
>extern int isinf (double __value) __attribute__ ((__const__));
>extern int finite (double __value) __attribute__ ((__const__));
>extern double infnan (int __error) __attribute__ ( (__const__) ); extern double __infnan (int __error) __attribute__ ( (__const__) ) ;
>extern double drem (double __x, double __y) ; extern double __drem (double __x, double __y) ;
>extern double significand (double __x) ; extern double __significand (double __x) ;
>extern double copysign (double __x, double __y) __attribute__ ( (__const__) ); extern double __copysign (double __x, double __y) __attribute__ ( (__const__) ) ;
>extern int __isnan (double __value) __attribute__ ((__const__));
>extern int isnan (double __value) __attribute__ ((__const__));
>extern double j0 (double ) ; extern double __j0 (double ) ;
>extern double j1 (double ) ; extern double __j1 (double ) ;
>extern double jn (int, double ) ; extern double __jn (int, double ) ;
>extern double y0 (double ) ; extern double __y0 (double ) ;
>extern double y1 (double ) ; extern double __y1 (double ) ;
>extern double yn (int, double ) ; extern double __yn (int, double ) ;
>extern double erf (double ) ; extern double __erf (double ) ;
>extern double erfc (double ) ; extern double __erfc (double ) ;
>extern double lgamma (double ) ; extern double __lgamma (double ) ;
>extern double tgamma (double ) ; extern double __tgamma (double ) ;
>extern double gamma (double ) ; extern double __gamma (double ) ;
>extern double lgamma_r (double , int *__signgamp) ; extern double __lgamma_r (double , int *__signgamp) ;
>extern double rint (double __x) ; extern double __rint (double __x) ;
>extern double nextafter (double __x, double __y) __attribute__ ( (__const__) ); extern double __nextafter (double __x, double __y) __attribute__ ( (__const__) ) ;
>extern double remainder (double __x, double __y) ; extern double __remainder (double __x, double __y) ;
>extern double scalb (double __x, double __n) ; extern double __scalb (double __x, double __n) ;
>extern double scalbn (double __x, int __n) ; extern double __scalbn (double __x, int __n) ;
>extern int ilogb (double __x) ; extern int __ilogb (double __x) ;
># 336 "/usr/include/bits/mathcalls.h" 3
># 63 "/usr/include/math.h" 2 3
># 1 "/usr/include/bits/mathcalls.h" 1 3
>extern float acosf (float __x) ; extern float __acosf (float __x) ;
>extern float asinf (float __x) ; extern float __asinf (float __x) ;
>extern float atanf (float __x) ; extern float __atanf (float __x) ;
>extern float atan2f (float __y, float __x) ; extern float __atan2f (float __y, float __x) ;
>extern float cosf (float __x) ; extern float __cosf (float __x) ;
>extern float sinf (float __x) ; extern float __sinf (float __x) ;
>extern float tanf (float __x) ; extern float __tanf (float __x) ;
>extern float coshf (float __x) ; extern float __coshf (float __x) ;
>extern float sinhf (float __x) ; extern float __sinhf (float __x) ;
>extern float tanhf (float __x) ; extern float __tanhf (float __x) ;
>extern float acoshf (float __x) ; extern float __acoshf (float __x) ;
>extern float asinhf (float __x) ; extern float __asinhf (float __x) ;
>extern float atanhf (float __x) ; extern float __atanhf (float __x) ;
>extern float expf (float __x) ; extern float __expf (float __x) ;
>extern float frexpf (float __x, int *__exponent) ; extern float __frexpf (float __x, int *__exponent) ;
>extern float ldexpf (float __x, int __exponent) ; extern float __ldexpf (float __x, int __exponent) ;
>extern float logf (float __x) ; extern float __logf (float __x) ;
>extern float log10f (float __x) ; extern float __log10f (float __x) ;
>extern float modff (float __x, float *__iptr) ; extern float __modff (float __x, float *__iptr) ;
>extern float expm1f (float __x) ; extern float __expm1f (float __x) ;
>extern float log1pf (float __x) ; extern float __log1pf (float __x) ;
>extern float logbf (float __x) ; extern float __logbf (float __x) ;
>extern float powf (float __x, float __y) ; extern float __powf (float __x, float __y) ;
>extern float sqrtf (float __x) ; extern float __sqrtf (float __x) ;
>extern float hypotf (float __x, float __y) ; extern float __hypotf (float __x, float __y) ;
>extern float cbrtf (float __x) ; extern float __cbrtf (float __x) ;
>extern float ceilf (float __x) ; extern float __ceilf (float __x) ;
>extern float fabsf (float __x) __attribute__ ( (__const__) ); extern float __fabsf (float __x) __attribute__ ( (__const__) ) ;
>extern float floorf (float __x) ; extern float __floorf (float __x) ;
>extern float fmodf (float __x, float __y) ; extern float __fmodf (float __x, float __y) ;
>extern int __isinff (float __value) __attribute__ ((__const__));
>extern int __finitef (float __value) __attribute__ ((__const__));
>extern int isinff (float __value) __attribute__ ((__const__));
>extern int finitef (float __value) __attribute__ ((__const__));
>extern float infnanf (int __error) __attribute__ ( (__const__) ); extern float __infnanf (int __error) __attribute__ ( (__const__) ) ;
>extern float dremf (float __x, float __y) ; extern float __dremf (float __x, float __y) ;
>extern float significandf (float __x) ; extern float __significandf (float __x) ;
>extern float copysignf (float __x, float __y) __attribute__ ( (__const__) ); extern float __copysignf (float __x, float __y) __attribute__ ( (__const__) ) ;
>extern int __isnanf (float __value) __attribute__ ((__const__));
>extern int isnanf (float __value) __attribute__ ((__const__));
>extern float j0f (float ) ; extern float __j0f (float ) ;
>extern float j1f (float ) ; extern float __j1f (float ) ;
>extern float jnf (int, float ) ; extern float __jnf (int, float ) ;
>extern float y0f (float ) ; extern float __y0f (float ) ;
>extern float y1f (float ) ; extern float __y1f (float ) ;
>extern float ynf (int, float ) ; extern float __ynf (int, float ) ;
>extern float erff (float ) ; extern float __erff (float ) ;
>extern float erfcf (float ) ; extern float __erfcf (float ) ;
>extern float lgammaf (float ) ; extern float __lgammaf (float ) ;
>extern float tgammaf (float ) ; extern float __tgammaf (float ) ;
>extern float gammaf (float ) ; extern float __gammaf (float ) ;
>extern float lgammaf_r (float , int *__signgamp) ; extern float __lgammaf_r (float , int *__signgamp) ;
>extern float rintf (float __x) ; extern float __rintf (float __x) ;
>extern float nextafterf (float __x, float __y) __attribute__ ( (__const__) ); extern float __nextafterf (float __x, float __y) __attribute__ ( (__const__) ) ;
>extern float remainderf (float __x, float __y) ; extern float __remainderf (float __x, float __y) ;
>extern float scalbf (float __x, float __n) ; extern float __scalbf (float __x, float __n) ;
>extern float scalbnf (float __x, int __n) ; extern float __scalbnf (float __x, int __n) ;
>extern int ilogbf (float __x) ; extern int __ilogbf (float __x) ;
># 336 "/usr/include/bits/mathcalls.h" 3
># 82 "/usr/include/math.h" 2 3
># 1 "/usr/include/bits/mathcalls.h" 1 3
>extern long double acosl (long double __x) ; extern long double __acosl (long double __x) ;
>extern long double asinl (long double __x) ; extern long double __asinl (long double __x) ;
>extern long double atanl (long double __x) ; extern long double __atanl (long double __x) ;
>extern long double atan2l (long double __y, long double __x) ; extern long double __atan2l (long double __y, long double __x) ;
>extern long double cosl (long double __x) ; extern long double __cosl (long double __x) ;
>extern long double sinl (long double __x) ; extern long double __sinl (long double __x) ;
>extern long double tanl (long double __x) ; extern long double __tanl (long double __x) ;
>extern long double coshl (long double __x) ; extern long double __coshl (long double __x) ;
>extern long double sinhl (long double __x) ; extern long double __sinhl (long double __x) ;
>extern long double tanhl (long double __x) ; extern long double __tanhl (long double __x) ;
>extern long double acoshl (long double __x) ; extern long double __acoshl (long double __x) ;
>extern long double asinhl (long double __x) ; extern long double __asinhl (long double __x) ;
>extern long double atanhl (long double __x) ; extern long double __atanhl (long double __x) ;
>extern long double expl (long double __x) ; extern long double __expl (long double __x) ;
>extern long double frexpl (long double __x, int *__exponent) ; extern long double __frexpl (long double __x, int *__exponent) ;
>extern long double ldexpl (long double __x, int __exponent) ; extern long double __ldexpl (long double __x, int __exponent) ;
>extern long double logl (long double __x) ; extern long double __logl (long double __x) ;
>extern long double log10l (long double __x) ; extern long double __log10l (long double __x) ;
>extern long double modfl (long double __x, long double *__iptr) ; extern long double __modfl (long double __x, long double *__iptr) ;
>extern long double expm1l (long double __x) ; extern long double __expm1l (long double __x) ;
>extern long double log1pl (long double __x) ; extern long double __log1pl (long double __x) ;
>extern long double logbl (long double __x) ; extern long double __logbl (long double __x) ;
>extern long double powl (long double __x, long double __y) ; extern long double __powl (long double __x, long double __y) ;
>extern long double sqrtl (long double __x) ; extern long double __sqrtl (long double __x) ;
>extern long double hypotl (long double __x, long double __y) ; extern long double __hypotl (long double __x, long double __y) ;
>extern long double cbrtl (long double __x) ; extern long double __cbrtl (long double __x) ;
>extern long double ceill (long double __x) ; extern long double __ceill (long double __x) ;
>extern long double fabsl (long double __x) __attribute__ ( (__const__) ); extern long double __fabsl (long double __x) __attribute__ ( (__const__) ) ;
>extern long double floorl (long double __x) ; extern long double __floorl (long double __x) ;
>extern long double fmodl (long double __x, long double __y) ; extern long double __fmodl (long double __x, long double __y) ;
>extern int __isinfl (long double __value) __attribute__ ((__const__));
>extern int __finitel (long double __value) __attribute__ ((__const__));
>extern int isinfl (long double __value) __attribute__ ((__const__));
>extern int finitel (long double __value) __attribute__ ((__const__));
>extern long double infnanl (int __error) __attribute__ ( (__const__) ); extern long double __infnanl (int __error) __attribute__ ( (__const__) ) ;
>extern long double dreml (long double __x, long double __y) ; extern long double __dreml (long double __x, long double __y) ;
>extern long double significandl (long double __x) ; extern long double __significandl (long double __x) ;
>extern long double copysignl (long double __x, long double __y) __attribute__ ( (__const__) ); extern long double __copysignl (long double __x, long double __y) __attribute__ ( (__const__) ) ;
>extern int __isnanl (long double __value) __attribute__ ((__const__));
>extern int isnanl (long double __value) __attribute__ ((__const__));
>extern long double j0l (long double ) ; extern long double __j0l (long double ) ;
>extern long double j1l (long double ) ; extern long double __j1l (long double ) ;
>extern long double jnl (int, long double ) ; extern long double __jnl (int, long double ) ;
>extern long double y0l (long double ) ; extern long double __y0l (long double ) ;
>extern long double y1l (long double ) ; extern long double __y1l (long double ) ;
>extern long double ynl (int, long double ) ; extern long double __ynl (int, long double ) ;
>extern long double erfl (long double ) ; extern long double __erfl (long double ) ;
>extern long double erfcl (long double ) ; extern long double __erfcl (long double ) ;
>extern long double lgammal (long double ) ; extern long double __lgammal (long double ) ;
>extern long double tgammal (long double ) ; extern long double __tgammal (long double ) ;
>extern long double gammal (long double ) ; extern long double __gammal (long double ) ;
>extern long double lgammal_r (long double , int *__signgamp) ; extern long double __lgammal_r (long double , int *__signgamp) ;
>extern long double rintl (long double __x) ; extern long double __rintl (long double __x) ;
>extern long double nextafterl (long double __x, long double __y) __attribute__ ( (__const__) ); extern long double __nextafterl (long double __x, long double __y) __attribute__ ( (__const__) ) ;
>extern long double remainderl (long double __x, long double __y) ; extern long double __remainderl (long double __x, long double __y) ;
>extern long double scalbl (long double __x, long double __n) ; extern long double __scalbl (long double __x, long double __n) ;
>extern long double scalbnl (long double __x, int __n) ; extern long double __scalbnl (long double __x, int __n) ;
>extern int ilogbl (long double __x) ; extern int __ilogbl (long double __x) ;
># 336 "/usr/include/bits/mathcalls.h" 3
># 99 "/usr/include/math.h" 2 3
>extern int signgam;
># 232 "/usr/include/math.h" 3
>typedef enum
>{
> _IEEE_ = -1,
> _SVID_,
> _XOPEN_,
> _POSIX_,
> _ISOC_
>} _LIB_VERSION_TYPE;
>extern _LIB_VERSION_TYPE _LIB_VERSION;
>struct exception
> {
> int type;
> char *name;
> double arg1;
> double arg2;
> double retval;
> };
>extern int matherr (struct exception *__exc) ;
># 1 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/float.h" 1 3
>union __convert_long_double {
> unsigned __convert_long_double_i[4];
> long double __convert_long_double_d;
>};
># 289 "/usr/include/math.h" 2 3
># 299 "/usr/include/math.h" 3
># 336 "/usr/include/math.h" 3
># 407 "/usr/include/math.h" 3
># 3 "xxx.c" 2
># 1 "/usr/include/stdlib.h" 1 3
># 1 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 1 3
># 19 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 61 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 131 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 188 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 269 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 283 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 317 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 33 "/usr/include/stdlib.h" 2 3
>typedef struct
> {
> int quot;
> int rem;
> } div_t;
>typedef struct
> {
> long int quot;
> long int rem;
> } ldiv_t;
># 65 "/usr/include/stdlib.h" 3
>extern size_t __ctype_get_mb_cur_max (void) ;
>extern double atof (__const char *__nptr) ;
>extern int atoi (__const char *__nptr) ;
>extern long int atol (__const char *__nptr) ;
>__extension__ extern long long int atoll (__const char *__nptr) ;
>extern double strtod (__const char * __nptr,
> char ** __endptr) ;
>extern long int strtol (__const char * __nptr,
> char ** __endptr, int __base) ;
>extern unsigned long int strtoul (__const char * __nptr,
> char ** __endptr,
> int __base) ;
>__extension__
>extern long long int strtoq (__const char * __nptr,
> char ** __endptr, int __base) ;
>__extension__
>extern unsigned long long int strtouq (__const char * __nptr,
> char ** __endptr,
> int __base) ;
>__extension__
>extern long long int strtoll (__const char * __nptr,
> char ** __endptr, int __base) ;
>__extension__
>extern unsigned long long int strtoull (__const char * __nptr,
> char ** __endptr,
> int __base) ;
># 190 "/usr/include/stdlib.h" 3
>extern double __strtod_internal (__const char * __nptr,
> char ** __endptr,
> int __group) ;
>extern float __strtof_internal (__const char * __nptr,
> char ** __endptr, int __group) ;
>extern long double __strtold_internal (__const char *
> __nptr,
> char ** __endptr,
> int __group) ;
>extern long int __strtol_internal (__const char * __nptr,
> char ** __endptr,
> int __base, int __group) ;
>extern unsigned long int __strtoul_internal (__const char *
> __nptr,
> char ** __endptr,
> int __base, int __group) ;
>__extension__
>extern long long int __strtoll_internal (__const char * __nptr,
> char ** __endptr,
> int __base, int __group) ;
>__extension__
>extern unsigned long long int __strtoull_internal (__const char *
> __nptr,
> char **
> __endptr,
> int __base,
> int __group) ;
># 326 "/usr/include/stdlib.h" 3
>extern char *l64a (long int __n) ;
>extern long int a64l (__const char *__s) ;
># 1 "/usr/include/sys/types.h" 1 3
>typedef __u_char u_char;
>typedef __u_short u_short;
>typedef __u_int u_int;
>typedef __u_long u_long;
>typedef __quad_t quad_t;
>typedef __u_quad_t u_quad_t;
>typedef __fsid_t fsid_t;
>typedef __loff_t loff_t;
>typedef __ino_t ino_t;
>typedef __dev_t dev_t;
>typedef __gid_t gid_t;
>typedef __mode_t mode_t;
>typedef __nlink_t nlink_t;
>typedef __uid_t uid_t;
>typedef __pid_t pid_t;
>typedef __id_t id_t;
>typedef __ssize_t ssize_t;
>typedef __daddr_t daddr_t;
>typedef __caddr_t caddr_t;
>typedef __key_t key_t;
># 1 "/usr/include/time.h" 1 3
># 51 "/usr/include/time.h" 3
># 62 "/usr/include/time.h" 3
>typedef __time_t time_t;
># 89 "/usr/include/time.h" 3
># 279 "/usr/include/time.h" 3
># 122 "/usr/include/sys/types.h" 2 3
># 1 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 1 3
># 19 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 61 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 131 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 188 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 271 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 283 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 317 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 125 "/usr/include/sys/types.h" 2 3
>typedef unsigned long int ulong;
>typedef unsigned short int ushort;
>typedef unsigned int uint;
># 159 "/usr/include/sys/types.h" 3
>typedef int int8_t __attribute__ ((__mode__ ( __QI__ ))) ;
>typedef int int16_t __attribute__ ((__mode__ ( __HI__ ))) ;
>typedef int int32_t __attribute__ ((__mode__ ( __SI__ ))) ;
>typedef int int64_t __attribute__ ((__mode__ ( __DI__ ))) ;
>typedef unsigned int u_int8_t __attribute__ ((__mode__ ( __QI__ ))) ;
>typedef unsigned int u_int16_t __attribute__ ((__mode__ ( __HI__ ))) ;
>typedef unsigned int u_int32_t __attribute__ ((__mode__ ( __SI__ ))) ;
>typedef unsigned int u_int64_t __attribute__ ((__mode__ ( __DI__ ))) ;
>typedef int register_t __attribute__ ((__mode__ (__word__)));
># 1 "/usr/include/endian.h" 1 3
># 1 "/usr/include/bits/endian.h" 1 3
># 35 "/usr/include/endian.h" 2 3
># 191 "/usr/include/sys/types.h" 2 3
># 1 "/usr/include/sys/select.h" 1 3
># 1 "/usr/include/bits/select.h" 1 3
># 36 "/usr/include/bits/select.h" 3
># 56 "/usr/include/bits/select.h" 3
># 72 "/usr/include/bits/select.h" 3
># 31 "/usr/include/sys/select.h" 2 3
># 1 "/usr/include/bits/sigset.h" 1 3
>typedef int __sig_atomic_t;
>typedef struct
> {
> unsigned long int __val[(1024 / (8 * sizeof (unsigned long int))) ];
> } __sigset_t;
># 125 "/usr/include/bits/sigset.h" 3
># 34 "/usr/include/sys/select.h" 2 3
># 1 "/usr/include/time.h" 1 3
># 51 "/usr/include/time.h" 3
># 62 "/usr/include/time.h" 3
># 73 "/usr/include/time.h" 3
>struct timespec
> {
> long int tv_sec;
> long int tv_nsec;
> };
># 279 "/usr/include/time.h" 3
># 38 "/usr/include/sys/select.h" 2 3
>struct timeval;
>typedef __fd_mask fd_mask;
>typedef __fd_set fd_set;
>extern int __select (int __nfds, __fd_set *__readfds,
> __fd_set *__writefds, __fd_set *__exceptfds,
> struct timeval *__timeout) ;
>extern int select (int __nfds, __fd_set *__readfds,
> __fd_set *__writefds, __fd_set *__exceptfds,
> struct timeval *__timeout) ;
># 91 "/usr/include/sys/select.h" 3
># 194 "/usr/include/sys/types.h" 2 3
># 1 "/usr/include/sys/sysmacros.h" 1 3
># 47 "/usr/include/sys/sysmacros.h" 3
># 197 "/usr/include/sys/types.h" 2 3
>typedef __blkcnt_t blkcnt_t;
>typedef __fsblkcnt_t fsblkcnt_t;
>typedef __fsfilcnt_t fsfilcnt_t;
># 339 "/usr/include/stdlib.h" 2 3
>extern int32_t random (void) ;
>extern void srandom (unsigned int __seed) ;
>extern void * initstate (unsigned int __seed, void * __statebuf,
> size_t __statelen) ;
>extern void * setstate (void * __statebuf) ;
>struct random_data
> {
> int32_t *fptr;
> int32_t *rptr;
> int32_t *state;
> int rand_type;
> int rand_deg;
> int rand_sep;
> int32_t *end_ptr;
> };
>extern int random_r (struct random_data * __buf,
> int32_t * __result) ;
>extern int srandom_r (unsigned int __seed, struct random_data *__buf) ;
>extern int initstate_r (unsigned int __seed,
> void * __statebuf,
> size_t __statelen,
> struct random_data * __buf) ;
>extern int setstate_r (void * __statebuf,
> struct random_data * __buf) ;
>extern int rand (void) ;
>extern void srand (unsigned int __seed) ;
>extern int rand_r (unsigned int *__seed) ;
>extern double drand48 (void) ;
>extern double erand48 (unsigned short int __xsubi[3]) ;
>extern long int lrand48 (void) ;
>extern long int nrand48 (unsigned short int __xsubi[3]) ;
>extern long int mrand48 (void) ;
>extern long int jrand48 (unsigned short int __xsubi[3]) ;
>extern void srand48 (long int __seedval) ;
>extern unsigned short int *seed48 (unsigned short int __seed16v[3]) ;
>extern void lcong48 (unsigned short int __param[7]) ;
>struct drand48_data
> {
> unsigned short int x[3];
> unsigned short int a[3];
> unsigned short int c;
> unsigned short int old_x[3];
> int init;
> };
>extern int drand48_r (struct drand48_data * __buffer,
> double * __result) ;
>extern int erand48_r (unsigned short int __xsubi[3],
> struct drand48_data * __buffer,
> double * __result) ;
>extern int lrand48_r (struct drand48_data * __buffer,
> long int * __result) ;
>extern int nrand48_r (unsigned short int __xsubi[3],
> struct drand48_data * __buffer,
> long int * __result) ;
>extern int mrand48_r (struct drand48_data * __buffer,
> long int * __result) ;
>extern int jrand48_r (unsigned short int __xsubi[3],
> struct drand48_data * __buffer,
> long int * __result) ;
>extern int srand48_r (long int __seedval, struct drand48_data *__buffer) ;
>extern int seed48_r (unsigned short int __seed16v[3],
> struct drand48_data *__buffer) ;
>extern int lcong48_r (unsigned short int __param[7],
> struct drand48_data *__buffer) ;
>extern void * malloc (size_t __size) ;
>extern void * calloc (size_t __nmemb, size_t __size) ;
>extern void * realloc (void * __ptr, size_t __size) ;
>extern void free (void * __ptr) ;
>extern void cfree (void * __ptr) ;
># 1 "/usr/include/alloca.h" 1 3
># 1 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 1 3
># 19 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 61 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 131 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 188 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 271 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 283 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 317 "/usr/lib/gcc-lib/i386-redhat-linux/egcs-2.91.66/include/stddef.h" 3
># 25 "/usr/include/alloca.h" 2 3
>extern void * alloca (size_t __size) ;
># 492 "/usr/include/stdlib.h" 2 3
>extern void * valloc (size_t __size) ;
>extern void abort (void) __attribute__ ((__noreturn__));
>extern int atexit (void (*__func) (void)) ;
>extern int __on_exit (void (*__func) (int __status, void * __arg),
> void * __arg) ;
>extern int on_exit (void (*__func) (int __status, void * __arg),
> void * __arg) ;
>extern void exit (int __status) __attribute__ ((__noreturn__));
>extern char *getenv (__const char *__name) ;
>extern char *__secure_getenv (__const char *__name) ;
>extern int putenv (char *__string) ;
>extern int setenv (__const char *__name, __const char *__value,
> int __replace) ;
>extern void unsetenv (__const char *__name) ;
>extern int clearenv (void) ;
>extern char *mktemp (char *__template) ;
>extern int mkstemp (char *__template) ;
>extern int system (__const char *__command) ;
>extern char *realpath (__const char * __name,
> char * __resolved) ;
>typedef int (*__compar_fn_t) (__const void * , __const void * ) ;
>extern void * bsearch (__const void * __key, __const void * __base,
> size_t __nmemb, size_t __size,
> __compar_fn_t __compar) ;
>extern void qsort (void * __base, size_t __nmemb, size_t __size,
> __compar_fn_t __compar) ;
>extern int abs (int __x) __attribute__ ((__const__));
>extern long int labs (long int __x) __attribute__ ((__const__));
>extern div_t div (int __numer, int __denom) __attribute__ ((__const__));
>extern ldiv_t ldiv (long int __numer, long int __denom)
> __attribute__ ((__const__));
>extern char *ecvt (double __value, int __ndigit, int * __decpt,
> int * __sign) ;
>extern char *fcvt (double __value, int __ndigit, int * __decpt,
> int * __sign) ;
>extern char *gcvt (double __value, int __ndigit, char *__buf) ;
>extern char *qecvt (long double __value, int __ndigit,
> int * __decpt, int * __sign) ;
>extern char *qfcvt (long double __value, int __ndigit,
> int * __decpt, int * __sign) ;
>extern char *qgcvt (long double __value, int __ndigit, char *__buf) ;
>extern int ecvt_r (double __value, int __ndigit, int * __decpt,
> int * __sign, char * __buf,
> size_t __len) ;
>extern int fcvt_r (double __value, int __ndigit, int * __decpt,
> int * __sign, char * __buf,
> size_t __len) ;
>extern int qecvt_r (long double __value, int __ndigit,
> int * __decpt, int * __sign,
> char * __buf, size_t __len) ;
>extern int qfcvt_r (long double __value, int __ndigit,
> int * __decpt, int * __sign,
> char * __buf, size_t __len) ;
>extern int mblen (__const char *__s, size_t __n) ;
>extern int mbtowc (wchar_t * __pwc,
> __const char * __s, size_t __n) ;
>extern int wctomb (char *__s, wchar_t __wchar) ;
>extern size_t mbstowcs (wchar_t * __pwcs,
> __const char * __s, size_t __n) ;
>extern size_t wcstombs (char * __s,
> __const wchar_t * __pwcs, size_t __n) ;
>extern int rpmatch (__const char *__response) ;
># 732 "/usr/include/stdlib.h" 3
># 756 "/usr/include/stdlib.h" 3
># 766 "/usr/include/stdlib.h" 3
># 4 "xxx.c" 2
>int main(int argc, char **argv)
>{
> char line[2001], *strptr;
> float data[60000 ][120 ];
> float dat[60000 ];
> float mean, rms, err, max, min;
> float sigma_max = 3.0, thresh;
> return 0;
>}
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: ezmlm response
2000-09-16 9:33 ` Sunjay Bhatnagar
@ 2000-09-16 10:02 ` Alexandre Oliva
0 siblings, 0 replies; 25+ messages in thread
From: Alexandre Oliva @ 2000-09-16 10:02 UTC (permalink / raw)
To: Sunjay Bhatnagar; +Cc: gcc-help
On Sep 16, 2000, Sunjay Bhatnagar <sanjay@ncra.tifr.res.in> wrote:
> (1) Has my message reached egcs-bugs@sourceware.cygnus.com?
I don't recall having read it.
> (2) What else do I need to do?
Write to gcc-help@gcc.gnu.org.
> (3) I am not interested in subscribing to gcc related mailing lists.
You don't have to
--
Alexandre Oliva Enjoy Guarana', see http://www.ic.unicamp.br/~oliva/
Red Hat GCC Developer aoliva@{cygnus.com, redhat.com}
CS PhD student at IC-Unicamp oliva@{lsd.ic.unicamp.br, gnu.org}
Free Software Evangelist *Please* write to mailing lists, not to me
^ permalink raw reply [flat|nested] 25+ messages in thread
* ezmlm response
[not found] <969120121.16497.ezmlm@gcc.gnu.org>
@ 2000-09-16 9:33 ` Sunjay Bhatnagar
2000-09-16 10:02 ` Alexandre Oliva
0 siblings, 1 reply; 25+ messages in thread
From: Sunjay Bhatnagar @ 2000-09-16 9:33 UTC (permalink / raw)
To: gcc-help
I sent a mail to egcs-bugs@sourceware.cygnus.com for reporting a
possible bug in GCC and I got this response (I have removed the copy
of my mail to egcs-bugs@sourceware.cygnus.com from the end of the
included message). It's confusing!
(1) Has my message reached egcs-bugs@sourceware.cygnus.com?
(2) What else do I need to do?
(3) I am not interested in subscribing to gcc related mailing lists.
Regards,
sanjay
gcc-help@gcc.gnu.org writes:
>Hi! This is the ezmlm program. I'm managing the
>gcc@gcc.gnu.org mailing list.
>
>This is a generic help message. The message I received wasn't sent to
>any of my command addresses.
>
>
>--- Administrative commands for the gcc list ---
>
>I can handle administrative requests automatically. Please
>do not send them to the list address! Instead, send
>your message to the correct command address:
>
>To subscribe to the list, send a message to:
> <gcc-subscribe@gcc.gnu.org>
>
>To remove your address from the list, send a message to:
> <gcc-unsubscribe@gcc.gnu.org>
>
>Send mail to the following for info and FAQ for this list:
> <gcc-info@gcc.gnu.org>
> <gcc-faq@gcc.gnu.org>
>
>Similar addresses exist for the digest list:
> <gcc-digest-subscribe@gcc.gnu.org>
> <gcc-digest-unsubscribe@gcc.gnu.org>
>
>To get messages 123 through 145 (a maximum of 100 per request), mail:
> <gcc-get.123_145@gcc.gnu.org>
>
>To get an index with subject and author for messages 123-456 , mail:
> <gcc-index.123_456@gcc.gnu.org>
>
>They are always returned as sets of 100, max 2000 per request,
>so you'll actually get 100-499.
>
>To receive all messages with the same subject as message 12345,
>send an empty message to:
> <gcc-thread.12345@gcc.gnu.org>
>
>The messages do not really need to be empty, but I will ignore
>their content. Only the ADDRESS you send to is important.
>
>You can start a subscription for an alternate address,
>for example "john@host.domain", just add a hyphen and your
>address (with '=' instead of '@') after the command word:
><gcc-subscribe-john=host.domain@gcc.gnu.org>
>
>To stop subscription for this address, mail:
><gcc-unsubscribe-john=host.domain@gcc.gnu.org>
>
>In both cases, I'll send a confirmation message to that address. When
>you receive it, simply reply to it to complete your subscription.
>
>If despite following these instructions, you do not get the
>desired results, please contact my owner at
>gcc-owner@gcc.gnu.org. Please be patient, my owner is a
>lot slower than I am ;-)
>
>--- Enclosed is a copy of the request I received.
>
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: ezmlm response
[not found] <962872247.23185.ezmlm@gcc.gnu.org>
@ 2000-07-07 3:01 ` Matthias Riese
0 siblings, 0 replies; 25+ messages in thread
From: Matthias Riese @ 2000-07-07 3:01 UTC (permalink / raw)
To: gcc-help
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: ezmlm response
[not found] <962871834.22205.ezmlm@gcc.gnu.org>
@ 2000-07-07 3:01 ` Matthias Riese
0 siblings, 0 replies; 25+ messages in thread
From: Matthias Riese @ 2000-07-07 3:01 UTC (permalink / raw)
To: gcc-help
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: ezmlm response
[not found] <962872250.23201.ezmlm@gcc.gnu.org>
@ 2000-07-07 3:01 ` Matthias Riese
0 siblings, 0 replies; 25+ messages in thread
From: Matthias Riese @ 2000-07-07 3:01 UTC (permalink / raw)
To: gcc-help
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: ezmlm response
1999-10-13 16:30 ` Hironymus D'Souza [4052]
@ 1999-10-31 13:57 ` Hironymus D'Souza [4052]
0 siblings, 0 replies; 25+ messages in thread
From: Hironymus D'Souza [4052] @ 1999-10-31 13:57 UTC (permalink / raw)
To: gcc-help
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: ezmlm response
[not found] <939856305.8483.ezmlm@gcc.gnu.org>
@ 1999-10-13 16:30 ` Hironymus D'Souza [4052]
1999-10-31 13:57 ` Hironymus D'Souza [4052]
0 siblings, 1 reply; 25+ messages in thread
From: Hironymus D'Souza [4052] @ 1999-10-13 16:30 UTC (permalink / raw)
To: gcc-help
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: ezmlm response
1999-09-07 8:23 ` Luigi Cirillo
1999-09-30 23:56 ` Luigi Cirillo
@ 1999-10-01 0:00 ` Luigi Cirillo
1 sibling, 0 replies; 25+ messages in thread
From: Luigi Cirillo @ 1999-10-01 0:00 UTC (permalink / raw)
To: gcc-help
On Tue, 07 Sep 1999, you wrote:
> Hi! This is the ezmlm program. I'm managing the
> gcc@gcc.gnu.org mailing list.
>
> This is a generic help message. The message I received wasn't sent to
> any of my command addresses.
>
>
> --- Administrative commands for the gcc list ---
>
> I can handle administrative requests automatically. Please
> do not send them to the list address! Instead, send
> your message to the correct command address:
>
> To subscribe to the list, send a message to:
> <gcc-subscribe@gcc.gnu.org>
>
> To remove your address from the list, send a message to:
> <gcc-unsubscribe@gcc.gnu.org>
>
> Send mail to the following for info and FAQ for this list:
> <gcc-info@gcc.gnu.org>
> <gcc-faq@gcc.gnu.org>
>
> Similar addresses exist for the digest list:
> <gcc-digest-subscribe@gcc.gnu.org>
> <gcc-digest-unsubscribe@gcc.gnu.org>
>
> To get messages 123 through 145 (a maximum of 100 per request), mail:
> <gcc-get.123_145@gcc.gnu.org>
>
> To get an index with subject and author for messages 123-456 , mail:
> <gcc-index.123_456@gcc.gnu.org>
>
> They are always returned as sets of 100, max 2000 per request,
> so you'll actually get 100-499.
>
> To receive all messages with the same subject as message 12345,
> send an empty message to:
> <gcc-thread.12345@gcc.gnu.org>
>
> The messages do not really need to be empty, but I will ignore
> their content. Only the ADDRESS you send to is important.
>
> You can start a subscription for an alternate address,
> for example "john@host.domain", just add a hyphen and your
> address (with '=' instead of '@') after the command word:
> <gcc-subscribe-john=host.domain@gcc.gnu.org>
>
> To stop subscription for this address, mail:
> <gcc-unsubscribe-john=host.domain@gcc.gnu.org>
>
> In both cases, I'll send a confirmation message to that address. When
> you receive it, simply reply to it to complete your subscription.
>
> If despite following these instructions, you do not get the
> desired results, please contact my owner at
> gcc-owner@gcc.gnu.org. Please be patient, my owner is a
> lot slower than I am ;-)
>
> --- Enclosed is a copy of the request I received.
>
> Return-Path: <cirillo@pegaso.corecom.it>
> Received: (qmail 28607 invoked from network); 7 Sep 1999 15:13:05 -0000
> Received: from pegaso.corecom.it (root@131.175.40.4)
> by egcs.cygnus.com with SMTP; 7 Sep 1999 15:13:05 -0000
> Received: from pegaso.corecom.it (IDENT:cirillo@pegaso.corecom.it [131.175.40.4])
> by pegaso.corecom.it (8.9.3/8.9.3) with SMTP id RAA07787
> for <gcc-subsribe@gcc.gnu.org>; Tue, 7 Sep 1999 17:14:59 +0200
> From: Luigi Cirillo <cirillo@pegaso.corecom.it>
> Organization: CoreCom
> To: gcc-subsribe@gcc.gnu.org
> Date: Tue, 7 Sep 1999 17:14:14 +0200
> X-Mailer: KMail [version 1.0.20]
> Content-Type: text/plain
> MIME-Version: 1.0
> Message-Id: <99090717145901.07751@pegaso.corecom.it>
> Content-Transfer-Encoding: 8bit
^ permalink raw reply [flat|nested] 25+ messages in thread
* RE: ezmlm response
1999-09-16 17:57 Wei Liu
1999-09-30 23:56 ` Wei Liu
@ 1999-10-01 0:00 ` Wei Liu
1 sibling, 0 replies; 25+ messages in thread
From: Wei Liu @ 1999-10-01 0:00 UTC (permalink / raw)
To: gcc-help
> -----Original Message-----
> From: gcc-help@gcc.gnu.org [SMTP:gcc-help@gcc.gnu.org]
> Sent: Friday, September 17, 1999 8:54 AM
> To: digest-subscribe
> Subject: ezmlm response
>
>
> Hi! This is the ezmlm program. I'm managing the
> gcc@gcc.gnu.org mailing list.
>
> This is a generic help message. The message I received wasn't sent to
> any of my command addresses.
>
>
> --- Administrative commands for the gcc list ---
>
> I can handle administrative requests automatically. Please
> do not send them to the list address! Instead, send
> your message to the correct command address:
>
> To subscribe to the list, send a message to:
> <gcc-subscribe@gcc.gnu.org>
>
> To remove your address from the list, send a message to:
> <gcc-unsubscribe@gcc.gnu.org>
>
> Send mail to the following for info and FAQ for this list:
> <gcc-info@gcc.gnu.org>
> <gcc-faq@gcc.gnu.org>
>
> Similar addresses exist for the digest list:
> <gcc-digest-subscribe@gcc.gnu.org>
> <gcc-digest-unsubscribe@gcc.gnu.org>
>
> To get messages 123 through 145 (a maximum of 100 per request), mail:
> <gcc-get.123_145@gcc.gnu.org>
>
> To get an index with subject and author for messages 123-456 , mail:
> <gcc-index.123_456@gcc.gnu.org>
>
> They are always returned as sets of 100, max 2000 per request,
> so you'll actually get 100-499.
>
> To receive all messages with the same subject as message 12345,
> send an empty message to:
> <gcc-thread.12345@gcc.gnu.org>
>
> The messages do not really need to be empty, but I will ignore
> their content. Only the ADDRESS you send to is important.
>
> You can start a subscription for an alternate address,
> for example "john@host.domain", just add a hyphen and your
> address (with '=' instead of '@') after the command word:
> <gcc-subscribe-john=host.domain@gcc.gnu.org>
>
> To stop subscription for this address, mail:
> <gcc-unsubscribe-john=host.domain@gcc.gnu.org>
>
> In both cases, I'll send a confirmation message to that address. When
> you receive it, simply reply to it to complete your subscription.
>
> If despite following these instructions, you do not get the
> desired results, please contact my owner at
> gcc-owner@gcc.gnu.org. Please be patient, my owner is a
> lot slower than I am ;-)
>
> --- Enclosed is a copy of the request I received.
>
> Return-Path: <liuwei3@asiainfo.com>
> Received: (qmail 20597 invoked from network); 17 Sep 1999 00:54:05 -0000
> Received: from unknown (HELO bjaimail.asiainfo.com) (210.72.231.6)
> by egcs.cygnus.com with SMTP; 17 Sep 1999 00:54:05 -0000
> Received: by bjaimail.asiainfo.com with Internet Mail Service (5.5.2448.0)
> id <S7JV25QS>; Fri, 17 Sep 1999 08:50:11 +0800
> Message-ID:
> <C7EE44B7882ED21191CD00A0C98A0DBF25A1D8@aibjnts3.sw.asiainfo.com>
> From: Wei Liu <liuwei3@asiainfo.com>
> To: gcc-patchs-digest-subscribe@gcc.gnu.org
> Subject:
> Date: Fri, 17 Sep 1999 08:52:47 +0800
> MIME-Version: 1.0
> X-Mailer: Internet Mail Service (5.5.2448.0)
> Content-Type: text/plain
>
>
^ permalink raw reply [flat|nested] 25+ messages in thread
* RE: ezmlm response
1999-09-16 17:57 Wei Liu
@ 1999-09-30 23:56 ` Wei Liu
1999-10-01 0:00 ` Wei Liu
1 sibling, 0 replies; 25+ messages in thread
From: Wei Liu @ 1999-09-30 23:56 UTC (permalink / raw)
To: gcc-help
> -----Original Message-----
> From: gcc-help@gcc.gnu.org [SMTP:gcc-help@gcc.gnu.org]
> Sent: Friday, September 17, 1999 8:54 AM
> To: digest-subscribe
> Subject: ezmlm response
>
>
> Hi! This is the ezmlm program. I'm managing the
> gcc@gcc.gnu.org mailing list.
>
> This is a generic help message. The message I received wasn't sent to
> any of my command addresses.
>
>
> --- Administrative commands for the gcc list ---
>
> I can handle administrative requests automatically. Please
> do not send them to the list address! Instead, send
> your message to the correct command address:
>
> To subscribe to the list, send a message to:
> <gcc-subscribe@gcc.gnu.org>
>
> To remove your address from the list, send a message to:
> <gcc-unsubscribe@gcc.gnu.org>
>
> Send mail to the following for info and FAQ for this list:
> <gcc-info@gcc.gnu.org>
> <gcc-faq@gcc.gnu.org>
>
> Similar addresses exist for the digest list:
> <gcc-digest-subscribe@gcc.gnu.org>
> <gcc-digest-unsubscribe@gcc.gnu.org>
>
> To get messages 123 through 145 (a maximum of 100 per request), mail:
> <gcc-get.123_145@gcc.gnu.org>
>
> To get an index with subject and author for messages 123-456 , mail:
> <gcc-index.123_456@gcc.gnu.org>
>
> They are always returned as sets of 100, max 2000 per request,
> so you'll actually get 100-499.
>
> To receive all messages with the same subject as message 12345,
> send an empty message to:
> <gcc-thread.12345@gcc.gnu.org>
>
> The messages do not really need to be empty, but I will ignore
> their content. Only the ADDRESS you send to is important.
>
> You can start a subscription for an alternate address,
> for example "john@host.domain", just add a hyphen and your
> address (with '=' instead of '@') after the command word:
> <gcc-subscribe-john=host.domain@gcc.gnu.org>
>
> To stop subscription for this address, mail:
> <gcc-unsubscribe-john=host.domain@gcc.gnu.org>
>
> In both cases, I'll send a confirmation message to that address. When
> you receive it, simply reply to it to complete your subscription.
>
> If despite following these instructions, you do not get the
> desired results, please contact my owner at
> gcc-owner@gcc.gnu.org. Please be patient, my owner is a
> lot slower than I am ;-)
>
> --- Enclosed is a copy of the request I received.
>
> Return-Path: <liuwei3@asiainfo.com>
> Received: (qmail 20597 invoked from network); 17 Sep 1999 00:54:05 -0000
> Received: from unknown (HELO bjaimail.asiainfo.com) (210.72.231.6)
> by egcs.cygnus.com with SMTP; 17 Sep 1999 00:54:05 -0000
> Received: by bjaimail.asiainfo.com with Internet Mail Service (5.5.2448.0)
> id <S7JV25QS>; Fri, 17 Sep 1999 08:50:11 +0800
> Message-ID:
> <C7EE44B7882ED21191CD00A0C98A0DBF25A1D8@aibjnts3.sw.asiainfo.com>
> From: Wei Liu <liuwei3@asiainfo.com>
> To: gcc-patchs-digest-subscribe@gcc.gnu.org
> Subject:
> Date: Fri, 17 Sep 1999 08:52:47 +0800
> MIME-Version: 1.0
> X-Mailer: Internet Mail Service (5.5.2448.0)
> Content-Type: text/plain
>
>
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: ezmlm response
1999-09-07 8:23 ` Luigi Cirillo
@ 1999-09-30 23:56 ` Luigi Cirillo
1999-10-01 0:00 ` Luigi Cirillo
1 sibling, 0 replies; 25+ messages in thread
From: Luigi Cirillo @ 1999-09-30 23:56 UTC (permalink / raw)
To: gcc-help
On Tue, 07 Sep 1999, you wrote:
> Hi! This is the ezmlm program. I'm managing the
> gcc@gcc.gnu.org mailing list.
>
> This is a generic help message. The message I received wasn't sent to
> any of my command addresses.
>
>
> --- Administrative commands for the gcc list ---
>
> I can handle administrative requests automatically. Please
> do not send them to the list address! Instead, send
> your message to the correct command address:
>
> To subscribe to the list, send a message to:
> <gcc-subscribe@gcc.gnu.org>
>
> To remove your address from the list, send a message to:
> <gcc-unsubscribe@gcc.gnu.org>
>
> Send mail to the following for info and FAQ for this list:
> <gcc-info@gcc.gnu.org>
> <gcc-faq@gcc.gnu.org>
>
> Similar addresses exist for the digest list:
> <gcc-digest-subscribe@gcc.gnu.org>
> <gcc-digest-unsubscribe@gcc.gnu.org>
>
> To get messages 123 through 145 (a maximum of 100 per request), mail:
> <gcc-get.123_145@gcc.gnu.org>
>
> To get an index with subject and author for messages 123-456 , mail:
> <gcc-index.123_456@gcc.gnu.org>
>
> They are always returned as sets of 100, max 2000 per request,
> so you'll actually get 100-499.
>
> To receive all messages with the same subject as message 12345,
> send an empty message to:
> <gcc-thread.12345@gcc.gnu.org>
>
> The messages do not really need to be empty, but I will ignore
> their content. Only the ADDRESS you send to is important.
>
> You can start a subscription for an alternate address,
> for example "john@host.domain", just add a hyphen and your
> address (with '=' instead of '@') after the command word:
> <gcc-subscribe-john=host.domain@gcc.gnu.org>
>
> To stop subscription for this address, mail:
> <gcc-unsubscribe-john=host.domain@gcc.gnu.org>
>
> In both cases, I'll send a confirmation message to that address. When
> you receive it, simply reply to it to complete your subscription.
>
> If despite following these instructions, you do not get the
> desired results, please contact my owner at
> gcc-owner@gcc.gnu.org. Please be patient, my owner is a
> lot slower than I am ;-)
>
> --- Enclosed is a copy of the request I received.
>
> Return-Path: <cirillo@pegaso.corecom.it>
> Received: (qmail 28607 invoked from network); 7 Sep 1999 15:13:05 -0000
> Received: from pegaso.corecom.it (root@131.175.40.4)
> by egcs.cygnus.com with SMTP; 7 Sep 1999 15:13:05 -0000
> Received: from pegaso.corecom.it (IDENT:cirillo@pegaso.corecom.it [131.175.40.4])
> by pegaso.corecom.it (8.9.3/8.9.3) with SMTP id RAA07787
> for <gcc-subsribe@gcc.gnu.org>; Tue, 7 Sep 1999 17:14:59 +0200
> From: Luigi Cirillo <cirillo@pegaso.corecom.it>
> Organization: CoreCom
> To: gcc-subsribe@gcc.gnu.org
> Date: Tue, 7 Sep 1999 17:14:14 +0200
> X-Mailer: KMail [version 1.0.20]
> Content-Type: text/plain
> MIME-Version: 1.0
> Message-Id: <99090717145901.07751@pegaso.corecom.it>
> Content-Transfer-Encoding: 8bit
^ permalink raw reply [flat|nested] 25+ messages in thread
* RE: ezmlm response
@ 1999-09-16 17:57 Wei Liu
1999-09-30 23:56 ` Wei Liu
1999-10-01 0:00 ` Wei Liu
0 siblings, 2 replies; 25+ messages in thread
From: Wei Liu @ 1999-09-16 17:57 UTC (permalink / raw)
To: gcc-help
> -----Original Message-----
> From: gcc-help@gcc.gnu.org [SMTP:gcc-help@gcc.gnu.org]
> Sent: Friday, September 17, 1999 8:54 AM
> To: digest-subscribe
> Subject: ezmlm response
>
>
> Hi! This is the ezmlm program. I'm managing the
> gcc@gcc.gnu.org mailing list.
>
> This is a generic help message. The message I received wasn't sent to
> any of my command addresses.
>
>
> --- Administrative commands for the gcc list ---
>
> I can handle administrative requests automatically. Please
> do not send them to the list address! Instead, send
> your message to the correct command address:
>
> To subscribe to the list, send a message to:
> <gcc-subscribe@gcc.gnu.org>
>
> To remove your address from the list, send a message to:
> <gcc-unsubscribe@gcc.gnu.org>
>
> Send mail to the following for info and FAQ for this list:
> <gcc-info@gcc.gnu.org>
> <gcc-faq@gcc.gnu.org>
>
> Similar addresses exist for the digest list:
> <gcc-digest-subscribe@gcc.gnu.org>
> <gcc-digest-unsubscribe@gcc.gnu.org>
>
> To get messages 123 through 145 (a maximum of 100 per request), mail:
> <gcc-get.123_145@gcc.gnu.org>
>
> To get an index with subject and author for messages 123-456 , mail:
> <gcc-index.123_456@gcc.gnu.org>
>
> They are always returned as sets of 100, max 2000 per request,
> so you'll actually get 100-499.
>
> To receive all messages with the same subject as message 12345,
> send an empty message to:
> <gcc-thread.12345@gcc.gnu.org>
>
> The messages do not really need to be empty, but I will ignore
> their content. Only the ADDRESS you send to is important.
>
> You can start a subscription for an alternate address,
> for example "john@host.domain", just add a hyphen and your
> address (with '=' instead of '@') after the command word:
> <gcc-subscribe-john=host.domain@gcc.gnu.org>
>
> To stop subscription for this address, mail:
> <gcc-unsubscribe-john=host.domain@gcc.gnu.org>
>
> In both cases, I'll send a confirmation message to that address. When
> you receive it, simply reply to it to complete your subscription.
>
> If despite following these instructions, you do not get the
> desired results, please contact my owner at
> gcc-owner@gcc.gnu.org. Please be patient, my owner is a
> lot slower than I am ;-)
>
> --- Enclosed is a copy of the request I received.
>
> Return-Path: <liuwei3@asiainfo.com>
> Received: (qmail 20597 invoked from network); 17 Sep 1999 00:54:05 -0000
> Received: from unknown (HELO bjaimail.asiainfo.com) (210.72.231.6)
> by egcs.cygnus.com with SMTP; 17 Sep 1999 00:54:05 -0000
> Received: by bjaimail.asiainfo.com with Internet Mail Service (5.5.2448.0)
> id <S7JV25QS>; Fri, 17 Sep 1999 08:50:11 +0800
> Message-ID:
> <C7EE44B7882ED21191CD00A0C98A0DBF25A1D8@aibjnts3.sw.asiainfo.com>
> From: Wei Liu <liuwei3@asiainfo.com>
> To: gcc-patchs-digest-subscribe@gcc.gnu.org
> Subject:
> Date: Fri, 17 Sep 1999 08:52:47 +0800
> MIME-Version: 1.0
> X-Mailer: Internet Mail Service (5.5.2448.0)
> Content-Type: text/plain
>
>
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: ezmlm response
[not found] <936717190.28617.ezmlm@gcc.gnu.org>
@ 1999-09-07 8:23 ` Luigi Cirillo
1999-09-30 23:56 ` Luigi Cirillo
1999-10-01 0:00 ` Luigi Cirillo
0 siblings, 2 replies; 25+ messages in thread
From: Luigi Cirillo @ 1999-09-07 8:23 UTC (permalink / raw)
To: gcc-help
On Tue, 07 Sep 1999, you wrote:
> Hi! This is the ezmlm program. I'm managing the
> gcc@gcc.gnu.org mailing list.
>
> This is a generic help message. The message I received wasn't sent to
> any of my command addresses.
>
>
> --- Administrative commands for the gcc list ---
>
> I can handle administrative requests automatically. Please
> do not send them to the list address! Instead, send
> your message to the correct command address:
>
> To subscribe to the list, send a message to:
> <gcc-subscribe@gcc.gnu.org>
>
> To remove your address from the list, send a message to:
> <gcc-unsubscribe@gcc.gnu.org>
>
> Send mail to the following for info and FAQ for this list:
> <gcc-info@gcc.gnu.org>
> <gcc-faq@gcc.gnu.org>
>
> Similar addresses exist for the digest list:
> <gcc-digest-subscribe@gcc.gnu.org>
> <gcc-digest-unsubscribe@gcc.gnu.org>
>
> To get messages 123 through 145 (a maximum of 100 per request), mail:
> <gcc-get.123_145@gcc.gnu.org>
>
> To get an index with subject and author for messages 123-456 , mail:
> <gcc-index.123_456@gcc.gnu.org>
>
> They are always returned as sets of 100, max 2000 per request,
> so you'll actually get 100-499.
>
> To receive all messages with the same subject as message 12345,
> send an empty message to:
> <gcc-thread.12345@gcc.gnu.org>
>
> The messages do not really need to be empty, but I will ignore
> their content. Only the ADDRESS you send to is important.
>
> You can start a subscription for an alternate address,
> for example "john@host.domain", just add a hyphen and your
> address (with '=' instead of '@') after the command word:
> <gcc-subscribe-john=host.domain@gcc.gnu.org>
>
> To stop subscription for this address, mail:
> <gcc-unsubscribe-john=host.domain@gcc.gnu.org>
>
> In both cases, I'll send a confirmation message to that address. When
> you receive it, simply reply to it to complete your subscription.
>
> If despite following these instructions, you do not get the
> desired results, please contact my owner at
> gcc-owner@gcc.gnu.org. Please be patient, my owner is a
> lot slower than I am ;-)
>
> --- Enclosed is a copy of the request I received.
>
> Return-Path: <cirillo@pegaso.corecom.it>
> Received: (qmail 28607 invoked from network); 7 Sep 1999 15:13:05 -0000
> Received: from pegaso.corecom.it (root@131.175.40.4)
> by egcs.cygnus.com with SMTP; 7 Sep 1999 15:13:05 -0000
> Received: from pegaso.corecom.it (IDENT:cirillo@pegaso.corecom.it [131.175.40.4])
> by pegaso.corecom.it (8.9.3/8.9.3) with SMTP id RAA07787
> for <gcc-subsribe@gcc.gnu.org>; Tue, 7 Sep 1999 17:14:59 +0200
> From: Luigi Cirillo <cirillo@pegaso.corecom.it>
> Organization: CoreCom
> To: gcc-subsribe@gcc.gnu.org
> Date: Tue, 7 Sep 1999 17:14:14 +0200
> X-Mailer: KMail [version 1.0.20]
> Content-Type: text/plain
> MIME-Version: 1.0
> Message-Id: <99090717145901.07751@pegaso.corecom.it>
> Content-Transfer-Encoding: 8bit
^ permalink raw reply [flat|nested] 25+ messages in thread
end of thread, other threads:[~2019-11-06 9:56 UTC | newest]
Thread overview: 25+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <1573034147.76289.ezmlm@gcc.gnu.org>
2019-11-06 9:56 ` ezmlm response CNZhangQuan
2018-10-17 8:39 jfb
[not found] <1375946192.24898.ezmlm@gcc.gnu.org>
2013-08-08 7:18 ` zhaobin xv
[not found] <1065198819.5368.ezmlm@gcc.gnu.org>
[not found] ` <1065199263.3f7da69fd525d@www.nexusmail.uwaterloo.ca>
2003-10-06 19:36 ` y2bismil
[not found] <1025311624.26082.ezmlm@gcc.gnu.org>
2002-06-28 18:01 ` sun
-- strict thread matches above, loose matches on Subject: below --
2002-05-16 14:38 Gabriel Dos Reis
2001-12-16 18:36 joseph.wk.lau
2001-08-23 9:00 Marcus A Martin
[not found] <982836759.12385.ezmlm@gcc.gnu.org>
2001-02-22 4:25 ` Herman Pool
[not found] <973655870.5734.ezmlm@gcc.gnu.org>
2000-11-08 16:24 ` Pablo Hörtner
[not found] <969168460.8561.ezmlm@gcc.gnu.org>
2000-09-16 22:38 ` Sunjay Bhatnagar
2000-09-17 16:38 ` Alexandre Oliva
[not found] <969120121.16497.ezmlm@gcc.gnu.org>
2000-09-16 9:33 ` Sunjay Bhatnagar
2000-09-16 10:02 ` Alexandre Oliva
[not found] <962871834.22205.ezmlm@gcc.gnu.org>
2000-07-07 3:01 ` Matthias Riese
[not found] <962872247.23185.ezmlm@gcc.gnu.org>
2000-07-07 3:01 ` Matthias Riese
[not found] <962872250.23201.ezmlm@gcc.gnu.org>
2000-07-07 3:01 ` Matthias Riese
[not found] <939856305.8483.ezmlm@gcc.gnu.org>
1999-10-13 16:30 ` Hironymus D'Souza [4052]
1999-10-31 13:57 ` Hironymus D'Souza [4052]
1999-09-16 17:57 Wei Liu
1999-09-30 23:56 ` Wei Liu
1999-10-01 0:00 ` Wei Liu
[not found] <936717190.28617.ezmlm@gcc.gnu.org>
1999-09-07 8:23 ` Luigi Cirillo
1999-09-30 23:56 ` Luigi Cirillo
1999-10-01 0:00 ` Luigi Cirillo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).