* [Committed] Use QImode for offsets in zero_extract/sign_extract in i386.md (take #2)
@ 2023-07-29 16:13 Roger Sayle
0 siblings, 0 replies; only message in thread
From: Roger Sayle @ 2023-07-29 16:13 UTC (permalink / raw)
To: gcc-patches
[-- Attachment #1: Type: text/plain, Size: 2233 bytes --]
This patch reattempts to change the ZERO_EXTRACTs and SIGN_EXTRACTs
in i386.md to consistently use QImode for bit offsets (i.e. third and fourth
operands), matching the use of QImode for bit counts in shifts and rotates.
This iteration corrects the "ne:QI" vs "eq:QI" mistake in the previous
version, which was responsible for PR 110787 and PR 110790 and so was
rapidly reverted last weekend. New test cases have been added to check
the correct behaviour.
This patch has been tested on x86_64-pc-linux-gnu with and without
--enable-languages="all", with make bootstrap and make -k check, both
with and without --target_board=unix{-m32} with no new failures.
Committed to mainline as an obvious fix to the previously approved
patch. Sorry again for the temporary inconvenience, and thanks to
Rainer Orth for identifying/confirming the problematic patch.
2023-07-29 Roger Sayle <roger@nextmovesoftware.com>
gcc/ChangeLog
PR target/110790
* config/i386/i386.md (extv<mode>): Use QImode for offsets.
(extzv<mode>): Likewise.
(insv<mode>): Likewise.
(*testqi_ext_3): Likewise.
(*btr<mode>_2): Likewise.
(define_split): Likewise.
(*btsq_imm): Likewise.
(*btrq_imm): Likewise.
(*btcq_imm): Likewise.
(define_peephole2 x3): Likewise.
(*bt<mode>): Likewise
(*bt<mode>_mask): New define_insn_and_split.
(*jcc_bt<mode>): Use QImode for offsets.
(*jcc_bt<mode>_1): Delete obsolete pattern.
(*jcc_bt<mode>_mask): Use QImode offsets.
(*jcc_bt<mode>_mask_1): Likewise.
(define_split): Likewise.
(*bt<mode>_setcqi): Likewise.
(*bt<mode>_setncqi): Likewise.
(*bt<mode>_setnc<mode>): Likewise.
(*bt<mode>_setncqi_2): Likewise.
(*bt<mode>_setc<mode>_mask): New define_insn_and_split.
(bmi2_bzhi_<mode>3): Use QImode offsets.
(*bmi2_bzhi_<mode>3): Likewise.
(*bmi2_bzhi_<mode>3_1): Likewise.
(*bmi2_bzhi_<mode>3_1_ccz): Likewise.
(@tbm_bextri_<mode>): Likewise.
gcc/testsuite/ChangeLog
PR target/110790
* gcc.target/i386/pr110790-1.c: New test case.
* gcc.target/i386/pr110790-2.c: Likewise.
[-- Attachment #2: patchqi2.txt --]
[-- Type: text/plain, Size: 18494 bytes --]
diff --git a/gcc/config/i386/i386.md b/gcc/config/i386/i386.md
index 4db210c..efac228 100644
--- a/gcc/config/i386/i386.md
+++ b/gcc/config/i386/i386.md
@@ -3312,8 +3312,8 @@
(define_expand "extv<mode>"
[(set (match_operand:SWI24 0 "register_operand")
(sign_extract:SWI24 (match_operand:SWI24 1 "register_operand")
- (match_operand:SI 2 "const_int_operand")
- (match_operand:SI 3 "const_int_operand")))]
+ (match_operand:QI 2 "const_int_operand")
+ (match_operand:QI 3 "const_int_operand")))]
""
{
/* Handle extractions from %ah et al. */
@@ -3340,8 +3340,8 @@
(define_expand "extzv<mode>"
[(set (match_operand:SWI248 0 "register_operand")
(zero_extract:SWI248 (match_operand:SWI248 1 "register_operand")
- (match_operand:SI 2 "const_int_operand")
- (match_operand:SI 3 "const_int_operand")))]
+ (match_operand:QI 2 "const_int_operand")
+ (match_operand:QI 3 "const_int_operand")))]
""
{
if (ix86_expand_pextr (operands))
@@ -3428,8 +3428,8 @@
(define_expand "insv<mode>"
[(set (zero_extract:SWI248 (match_operand:SWI248 0 "register_operand")
- (match_operand:SI 1 "const_int_operand")
- (match_operand:SI 2 "const_int_operand"))
+ (match_operand:QI 1 "const_int_operand")
+ (match_operand:QI 2 "const_int_operand"))
(match_operand:SWI248 3 "register_operand"))]
""
{
@@ -10788,8 +10788,8 @@
(match_operator 1 "compare_operator"
[(zero_extract:SWI248
(match_operand 2 "int_nonimmediate_operand" "rm")
- (match_operand 3 "const_int_operand")
- (match_operand 4 "const_int_operand"))
+ (match_operand:QI 3 "const_int_operand")
+ (match_operand:QI 4 "const_int_operand"))
(const_int 0)]))]
"/* Ensure that resulting mask is zero or sign extended operand. */
INTVAL (operands[4]) >= 0
@@ -15965,7 +15965,7 @@
[(set (zero_extract:HI
(match_operand:SWI12 0 "nonimmediate_operand")
(const_int 1)
- (zero_extend:SI (match_operand:QI 1 "register_operand")))
+ (match_operand:QI 1 "register_operand"))
(const_int 0))
(clobber (reg:CC FLAGS_REG))]
"TARGET_USE_BT && ix86_pre_reload_split ()"
@@ -15989,7 +15989,7 @@
[(set (zero_extract:HI
(match_operand:SWI12 0 "register_operand")
(const_int 1)
- (zero_extend:SI (match_operand:QI 1 "register_operand")))
+ (match_operand:QI 1 "register_operand"))
(const_int 0))
(clobber (reg:CC FLAGS_REG))]
"TARGET_USE_BT && ix86_pre_reload_split ()"
@@ -16016,7 +16016,7 @@
(define_insn "*btsq_imm"
[(set (zero_extract:DI (match_operand:DI 0 "nonimmediate_operand" "+rm")
(const_int 1)
- (match_operand 1 "const_0_to_63_operand"))
+ (match_operand:QI 1 "const_0_to_63_operand"))
(const_int 1))
(clobber (reg:CC FLAGS_REG))]
"TARGET_64BIT && (TARGET_USE_BT || reload_completed)"
@@ -16029,7 +16029,7 @@
(define_insn "*btrq_imm"
[(set (zero_extract:DI (match_operand:DI 0 "nonimmediate_operand" "+rm")
(const_int 1)
- (match_operand 1 "const_0_to_63_operand"))
+ (match_operand:QI 1 "const_0_to_63_operand"))
(const_int 0))
(clobber (reg:CC FLAGS_REG))]
"TARGET_64BIT && (TARGET_USE_BT || reload_completed)"
@@ -16042,7 +16042,7 @@
(define_insn "*btcq_imm"
[(set (zero_extract:DI (match_operand:DI 0 "nonimmediate_operand" "+rm")
(const_int 1)
- (match_operand 1 "const_0_to_63_operand"))
+ (match_operand:QI 1 "const_0_to_63_operand"))
(not:DI (zero_extract:DI (match_dup 0) (const_int 1) (match_dup 1))))
(clobber (reg:CC FLAGS_REG))]
"TARGET_64BIT && (TARGET_USE_BT || reload_completed)"
@@ -16059,7 +16059,7 @@
(parallel [(set (zero_extract:DI
(match_operand:DI 0 "nonimmediate_operand")
(const_int 1)
- (match_operand 1 "const_0_to_63_operand"))
+ (match_operand:QI 1 "const_0_to_63_operand"))
(const_int 1))
(clobber (reg:CC FLAGS_REG))])]
"TARGET_64BIT && !TARGET_USE_BT"
@@ -16083,7 +16083,7 @@
(parallel [(set (zero_extract:DI
(match_operand:DI 0 "nonimmediate_operand")
(const_int 1)
- (match_operand 1 "const_0_to_63_operand"))
+ (match_operand:QI 1 "const_0_to_63_operand"))
(const_int 0))
(clobber (reg:CC FLAGS_REG))])]
"TARGET_64BIT && !TARGET_USE_BT"
@@ -16107,7 +16107,7 @@
(parallel [(set (zero_extract:DI
(match_operand:DI 0 "nonimmediate_operand")
(const_int 1)
- (match_operand 1 "const_0_to_63_operand"))
+ (match_operand:QI 1 "const_0_to_63_operand"))
(not:DI (zero_extract:DI
(match_dup 0) (const_int 1) (match_dup 1))))
(clobber (reg:CC FLAGS_REG))])]
@@ -16135,14 +16135,14 @@
(zero_extract:SWI48
(match_operand:SWI48 0 "nonimmediate_operand" "r,m")
(const_int 1)
- (match_operand:SI 1 "nonmemory_operand" "r<S>,<S>"))
+ (match_operand:QI 1 "nonmemory_operand" "q<S>,<S>"))
(const_int 0)))]
""
{
switch (get_attr_mode (insn))
{
case MODE_SI:
- return "bt{l}\t{%1, %k0|%k0, %1}";
+ return "bt{l}\t{%k1, %k0|%k0, %k1}";
case MODE_DI:
return "bt{q}\t{%q1, %0|%0, %q1}";
@@ -16160,13 +16160,36 @@
(const_string "SI")
(const_string "<MODE>")))])
+(define_insn_and_split "*bt<SWI48:mode>_mask"
+ [(set (reg:CCC FLAGS_REG)
+ (compare:CCC
+ (zero_extract:SWI48
+ (match_operand:SWI48 0 "nonimmediate_operand" "r,m")
+ (const_int 1)
+ (subreg:QI
+ (and:SWI248
+ (match_operand:SWI248 1 "register_operand")
+ (match_operand 2 "const_int_operand")) 0))
+ (const_int 0)))]
+ "TARGET_USE_BT
+ && (INTVAL (operands[2]) & (GET_MODE_BITSIZE (<SWI48:MODE>mode)-1))
+ == GET_MODE_BITSIZE (<SWI48:MODE>mode)-1
+ && ix86_pre_reload_split ()"
+ "#"
+ "&& 1"
+ [(set (reg:CCC FLAGS_REG)
+ (compare:CCC
+ (zero_extract:SWI48 (match_dup 0) (const_int 1) (match_dup 1))
+ (const_int 0)))]
+ "operands[1] = gen_lowpart (QImode, operands[1]);")
+
(define_insn_and_split "*jcc_bt<mode>"
[(set (pc)
(if_then_else (match_operator 0 "bt_comparison_operator"
[(zero_extract:SWI48
(match_operand:SWI48 1 "nonimmediate_operand")
(const_int 1)
- (match_operand:SI 2 "nonmemory_operand"))
+ (match_operand:QI 2 "nonmemory_operand"))
(const_int 0)])
(label_ref (match_operand 3))
(pc)))
@@ -16196,39 +16219,6 @@
PUT_CODE (operands[0], reverse_condition (GET_CODE (operands[0])));
})
-(define_insn_and_split "*jcc_bt<mode>_1"
- [(set (pc)
- (if_then_else (match_operator 0 "bt_comparison_operator"
- [(zero_extract:SWI48
- (match_operand:SWI48 1 "register_operand")
- (const_int 1)
- (zero_extend:SI
- (match_operand:QI 2 "register_operand")))
- (const_int 0)])
- (label_ref (match_operand 3))
- (pc)))
- (clobber (reg:CC FLAGS_REG))]
- "(TARGET_USE_BT || optimize_function_for_size_p (cfun))
- && ix86_pre_reload_split ()"
- "#"
- "&& 1"
- [(set (reg:CCC FLAGS_REG)
- (compare:CCC
- (zero_extract:SWI48
- (match_dup 1)
- (const_int 1)
- (match_dup 2))
- (const_int 0)))
- (set (pc)
- (if_then_else (match_op_dup 0 [(reg:CCC FLAGS_REG) (const_int 0)])
- (label_ref (match_dup 3))
- (pc)))]
-{
- operands[2] = lowpart_subreg (SImode, operands[2], QImode);
- operands[0] = shallow_copy_rtx (operands[0]);
- PUT_CODE (operands[0], reverse_condition (GET_CODE (operands[0])));
-})
-
;; Avoid useless masking of bit offset operand.
(define_insn_and_split "*jcc_bt<mode>_mask"
[(set (pc)
@@ -16236,8 +16226,8 @@
[(zero_extract:SWI48
(match_operand:SWI48 1 "register_operand")
(const_int 1)
- (and:SI
- (match_operand:SI 2 "register_operand")
+ (and:QI
+ (match_operand:QI 2 "register_operand")
(match_operand 3 "const_int_operand")))])
(label_ref (match_operand 4))
(pc)))
@@ -16264,23 +16254,23 @@
PUT_CODE (operands[0], reverse_condition (GET_CODE (operands[0])));
})
-(define_insn_and_split "*jcc_bt<mode>_mask_1"
+;; Avoid useless masking of bit offset operand.
+(define_insn_and_split "*jcc_bt<SWI48:mode>_mask_1"
[(set (pc)
- (if_then_else (match_operator 0 "bt_comparison_operator"
+ (if_then_else (match_operator 0 "bt_comparison_operator"
[(zero_extract:SWI48
(match_operand:SWI48 1 "register_operand")
(const_int 1)
- (zero_extend:SI
- (subreg:QI
- (and
- (match_operand 2 "int248_register_operand")
- (match_operand 3 "const_int_operand")) 0)))])
+ (subreg:QI
+ (and:SWI248
+ (match_operand:SWI248 2 "register_operand")
+ (match_operand 3 "const_int_operand")) 0))])
(label_ref (match_operand 4))
(pc)))
(clobber (reg:CC FLAGS_REG))]
"(TARGET_USE_BT || optimize_function_for_size_p (cfun))
- && (INTVAL (operands[3]) & (GET_MODE_BITSIZE (<MODE>mode)-1))
- == GET_MODE_BITSIZE (<MODE>mode)-1
+ && (INTVAL (operands[3]) & (GET_MODE_BITSIZE (<SWI48:MODE>mode)-1))
+ == GET_MODE_BITSIZE (<SWI48:MODE>mode)-1
&& ix86_pre_reload_split ()"
"#"
"&& 1"
@@ -16296,10 +16286,9 @@
(label_ref (match_dup 4))
(pc)))]
{
- operands[2] = force_reg (GET_MODE (operands[2]), operands[2]);
- operands[2] = gen_lowpart (SImode, operands[2]);
operands[0] = shallow_copy_rtx (operands[0]);
PUT_CODE (operands[0], reverse_condition (GET_CODE (operands[0])));
+ operands[2] = gen_lowpart (QImode, operands[2]);
})
;; Help combine recognize bt followed by cmov
@@ -16310,7 +16299,7 @@
[(zero_extract:SWI48
(match_operand:SWI48 1 "register_operand")
(const_int 1)
- (zero_extend:SI (match_operand:QI 2 "register_operand")))
+ (match_operand:QI 2 "register_operand"))
(const_int 0)])
(match_operand:SWI248 3 "nonimmediate_operand")
(match_operand:SWI248 4 "nonimmediate_operand")))]
@@ -16328,7 +16317,6 @@
{
if (GET_CODE (operands[5]) == EQ)
std::swap (operands[3], operands[4]);
- operands[2] = lowpart_subreg (SImode, operands[2], QImode);
})
;; Help combine recognize bt followed by setc
@@ -16337,7 +16325,7 @@
(zero_extract:SWI48
(match_operand:SWI48 1 "register_operand")
(const_int 1)
- (zero_extend:SI (match_operand:QI 2 "register_operand"))))
+ (match_operand:QI 2 "register_operand")))
(clobber (reg:CC FLAGS_REG))]
"TARGET_USE_BT && ix86_pre_reload_split ()"
"#"
@@ -16347,8 +16335,7 @@
(zero_extract:SWI48 (match_dup 1) (const_int 1) (match_dup 2))
(const_int 0)))
(set (match_dup 0)
- (eq:QI (reg:CCC FLAGS_REG) (const_int 0)))]
- "operands[2] = lowpart_subreg (SImode, operands[2], QImode);")
+ (eq:QI (reg:CCC FLAGS_REG) (const_int 0)))])
;; Help combine recognize bt followed by setnc
(define_insn_and_split "*bt<mode>_setncqi"
@@ -16368,8 +16355,7 @@
(zero_extract:SWI48 (match_dup 1) (const_int 1) (match_dup 2))
(const_int 0)))
(set (match_dup 0)
- (ne:QI (reg:CCC FLAGS_REG) (const_int 0)))]
- "operands[2] = lowpart_subreg (SImode, operands[2], QImode);")
+ (ne:QI (reg:CCC FLAGS_REG) (const_int 0)))])
(define_insn_and_split "*bt<mode>_setnc<mode>"
[(set (match_operand:SWI48 0 "register_operand")
@@ -16389,10 +16375,7 @@
(set (match_dup 3)
(ne:QI (reg:CCC FLAGS_REG) (const_int 0)))
(set (match_dup 0) (zero_extend:SWI48 (match_dup 3)))]
-{
- operands[2] = lowpart_subreg (SImode, operands[2], QImode);
- operands[3] = gen_reg_rtx (QImode);
-})
+ "operands[3] = gen_reg_rtx (QImode);")
;; Help combine recognize bt followed by setnc (PR target/110588)
(define_insn_and_split "*bt<mode>_setncqi_2"
@@ -16401,7 +16384,7 @@
(zero_extract:SWI48
(match_operand:SWI48 1 "register_operand")
(const_int 1)
- (zero_extend:SI (match_operand:QI 2 "register_operand")))
+ (match_operand:QI 2 "register_operand"))
(const_int 0)))
(clobber (reg:CC FLAGS_REG))]
"TARGET_USE_BT && ix86_pre_reload_split ()"
@@ -16412,8 +16395,36 @@
(zero_extract:SWI48 (match_dup 1) (const_int 1) (match_dup 2))
(const_int 0)))
(set (match_dup 0)
- (ne:QI (reg:CCC FLAGS_REG) (const_int 0)))]
- "operands[2] = lowpart_subreg (SImode, operands[2], QImode);")
+ (ne:QI (reg:CCC FLAGS_REG) (const_int 0)))])
+
+;; Help combine recognize bt followed by setc
+(define_insn_and_split "*bt<mode>_setc<mode>_mask"
+ [(set (match_operand:SWI48 0 "register_operand")
+ (zero_extract:SWI48
+ (match_operand:SWI48 1 "register_operand")
+ (const_int 1)
+ (subreg:QI
+ (and:SWI48
+ (match_operand:SWI48 2 "register_operand")
+ (match_operand 3 "const_int_operand")) 0)))
+ (clobber (reg:CC FLAGS_REG))]
+ "TARGET_USE_BT
+ && (INTVAL (operands[3]) & (GET_MODE_BITSIZE (<MODE>mode)-1))
+ == GET_MODE_BITSIZE (<MODE>mode)-1
+ && ix86_pre_reload_split ()"
+ "#"
+ "&& 1"
+ [(set (reg:CCC FLAGS_REG)
+ (compare:CCC
+ (zero_extract:SWI48 (match_dup 1) (const_int 1) (match_dup 2))
+ (const_int 0)))
+ (set (match_dup 3)
+ (eq:QI (reg:CCC FLAGS_REG) (const_int 0)))
+ (set (match_dup 0) (zero_extend:SWI48 (match_dup 3)))]
+{
+ operands[2] = gen_lowpart (QImode, operands[2]);
+ operands[3] = gen_reg_rtx (QImode);
+})
\f
;; Store-flag instructions.
@@ -18708,46 +18719,29 @@
[(parallel
[(set (match_operand:SWI48 0 "register_operand")
(if_then_else:SWI48
- (ne:QI (and:SWI48 (match_operand:SWI48 2 "register_operand")
- (const_int 255))
+ (ne:QI (match_operand:QI 2 "register_operand")
(const_int 0))
(zero_extract:SWI48
(match_operand:SWI48 1 "nonimmediate_operand")
- (umin:SWI48 (and:SWI48 (match_dup 2) (const_int 255))
- (match_dup 3))
+ (umin:QI (match_dup 2) (match_dup 3))
(const_int 0))
(const_int 0)))
(clobber (reg:CC FLAGS_REG))])]
"TARGET_BMI2"
- "operands[3] = GEN_INT (<MODE_SIZE> * BITS_PER_UNIT);")
+{
+ operands[2] = gen_lowpart (QImode, operands[2]);
+ operands[3] = GEN_INT (<MODE_SIZE> * BITS_PER_UNIT);
+})
(define_insn "*bmi2_bzhi_<mode>3"
[(set (match_operand:SWI48 0 "register_operand" "=r")
(if_then_else:SWI48
- (ne:QI (and:SWI48 (match_operand:SWI48 2 "register_operand" "r")
- (const_int 255))
+ (ne:QI (match_operand:QI 2 "register_operand" "q")
(const_int 0))
(zero_extract:SWI48
(match_operand:SWI48 1 "nonimmediate_operand" "rm")
- (umin:SWI48 (and:SWI48 (match_dup 2) (const_int 255))
- (match_operand:SWI48 3 "const_int_operand"))
- (const_int 0))
- (const_int 0)))
- (clobber (reg:CC FLAGS_REG))]
- "TARGET_BMI2 && INTVAL (operands[3]) == <MODE_SIZE> * BITS_PER_UNIT"
- "bzhi\t{%2, %1, %0|%0, %1, %2}"
- [(set_attr "type" "bitmanip")
- (set_attr "prefix" "vex")
- (set_attr "mode" "<MODE>")])
-
-(define_insn "*bmi2_bzhi_<mode>3_1"
- [(set (match_operand:SWI48 0 "register_operand" "=r")
- (if_then_else:SWI48
- (ne:QI (match_operand:QI 2 "register_operand" "r") (const_int 0))
- (zero_extract:SWI48
- (match_operand:SWI48 1 "nonimmediate_operand" "rm")
- (umin:SWI48 (zero_extend:SWI48 (match_dup 2))
- (match_operand:SWI48 3 "const_int_operand"))
+ (umin:QI (match_dup 2)
+ (match_operand:QI 3 "const_int_operand"))
(const_int 0))
(const_int 0)))
(clobber (reg:CC FLAGS_REG))]
@@ -18764,8 +18758,8 @@
(ne:QI (match_operand:QI 2 "register_operand" "r") (const_int 0))
(zero_extract:SWI48
(match_operand:SWI48 1 "nonimmediate_operand" "rm")
- (umin:SWI48 (zero_extend:SWI48 (match_dup 2))
- (match_operand:SWI48 3 "const_int_operand"))
+ (umin:QI (match_dup 2)
+ (match_operand:QI 3 "const_int_operand"))
(const_int 0))
(const_int 0))
(const_int 0)))
@@ -18864,8 +18858,8 @@
[(set (match_operand:SWI48 0 "register_operand" "=r")
(zero_extract:SWI48
(match_operand:SWI48 1 "nonimmediate_operand" "rm")
- (match_operand 2 "const_0_to_255_operand")
- (match_operand 3 "const_0_to_255_operand")))
+ (match_operand:QI 2 "const_0_to_255_operand")
+ (match_operand:QI 3 "const_0_to_255_operand")))
(clobber (reg:CC FLAGS_REG))]
"TARGET_TBM"
{
diff --git a/gcc/testsuite/gcc.target/i386/pr110790-1.c b/gcc/testsuite/gcc.target/i386/pr110790-1.c
new file mode 100644
index 0000000..71733c3
--- /dev/null
+++ b/gcc/testsuite/gcc.target/i386/pr110790-1.c
@@ -0,0 +1,33 @@
+/* { dg-do run } */
+/* { dg-options "-O2" } */
+typedef unsigned long int mp_limb_t;
+typedef const mp_limb_t * mp_srcptr;
+
+__attribute__((noipa))
+int
+refmpn_tstbit_bad (mp_srcptr ptr, unsigned long bit)
+{
+ return (((ptr)[(bit)/(32 - 0)] & (((mp_limb_t) 1L) << ((bit)%(32 - 0)))) != 0);
+}
+
+__attribute__((noipa, optimize(0)))
+int
+refmpn_tstbit_good (mp_srcptr ptr, unsigned long bit)
+{
+ return (((ptr)[(bit)/(32 - 0)] & (((mp_limb_t) 1L) << ((bit)%(32 - 0)))) != 0);
+}
+
+__attribute__((noipa))
+int
+refmpn_tstbit (mp_srcptr ptr, unsigned long bit)
+{
+ if (refmpn_tstbit_bad (ptr, bit) != refmpn_tstbit_good (ptr, bit)) {
+ __builtin_trap();
+ }
+ return refmpn_tstbit_bad (ptr, bit);
+}
+
+int main(){
+ unsigned long num[] = { 0x3801ff9f, 0x0, 0x0, 0x0 };
+ refmpn_tstbit(num, 0);
+}
diff --git a/gcc/testsuite/gcc.target/i386/pr110790-2.c b/gcc/testsuite/gcc.target/i386/pr110790-2.c
new file mode 100644
index 0000000..8b9d650
--- /dev/null
+++ b/gcc/testsuite/gcc.target/i386/pr110790-2.c
@@ -0,0 +1,13 @@
+/* { dg-do compile } */
+/* { dg-options "-O2" } */
+typedef unsigned long int mp_limb_t;
+typedef const mp_limb_t * mp_srcptr;
+
+int
+refmpn_tstbit_bad (mp_srcptr ptr, unsigned long bit)
+{
+ return (((ptr)[(bit)/(32 - 0)] & (((mp_limb_t) 1L) << ((bit)%(32 - 0)))) != 0);
+}
+
+/* { dg-final { scan-assembler "bt\[ql\]" } } */
+/* { dg-final { scan-assembler "setc" } } */
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2023-07-29 16:13 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-07-29 16:13 [Committed] Use QImode for offsets in zero_extract/sign_extract in i386.md (take #2) Roger Sayle
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).