* [PATCH] VECT: Add MASK_LEN_STRIDED_LOAD/MASK_LEN_STRIDED_STORE into loop vectorizer
@ 2023-11-14 3:46 Juzhe-Zhong
2023-11-16 7:22 ` juzhe.zhong
0 siblings, 1 reply; 2+ messages in thread
From: Juzhe-Zhong @ 2023-11-14 3:46 UTC (permalink / raw)
To: gcc-patches; +Cc: richard.sandiford, rguenther, Juzhe-Zhong
This patch support generating MASK_LEN_STRIDED_LOAD/MASK_LEN_STRIDED_STORE IR
for invariant stride memory access.
It's a special optimization for targets like RVV.
RVV has both indexed load/store and stride load/store.
In RVV, we always have gather/scatter and strided optab at the same time.
E.g.
void foo (int *__restrict a,
int * __restrict b, int n, int *__restrict indice)
{
for (int i = 0; i < n; i++)
a[indice[i]] = b[indice[i]] + a[i];
}
Such vector codes, RVV is using indexed load/store for gather/scatter.
E.g.
void foo (int *__restrict a,
int * __restrict b, int n, int m)
{
for (int i = 0; i < n; i++)
a[i] = b[i * m] + a[i];
}
Such vector codes, RVV is using stride load/store instructions.
We only need to support direct mask_len_stride_xxx optab for invariant stride.
gcc/ChangeLog:
* tree-vect-stmts.cc (vect_get_strided_load_store_ops): Add MASK_LEN_STRIDED_LOAD/MASK_LEN_STRIDED_STORE.
(vectorizable_store): Ditto.
(vectorizable_load): Ditto.
---
gcc/tree-vect-stmts.cc | 47 ++++++++++++++++++++++++++++++++++--------
1 file changed, 38 insertions(+), 9 deletions(-)
diff --git a/gcc/tree-vect-stmts.cc b/gcc/tree-vect-stmts.cc
index ee89f47c468..9c65b688510 100644
--- a/gcc/tree-vect-stmts.cc
+++ b/gcc/tree-vect-stmts.cc
@@ -2863,6 +2863,17 @@ vect_get_strided_load_store_ops (stmt_vec_info stmt_info,
*dataref_bump = cse_and_gimplify_to_preheader (loop_vinfo, bump);
}
+ /* Target supports strided load/store use DR_STEP as stride for VEC_OFFSET
+ directly instead of build VEC_OFFSET with VEC_SERIES. */
+ internal_fn ifn
+ = DR_IS_READ (dr) ? IFN_MASK_LEN_STRIDED_LOAD : IFN_MASK_LEN_STRIDED_STORE;
+ if (direct_internal_fn_supported_p (ifn, vectype, OPTIMIZE_FOR_SPEED))
+ {
+ *vec_offset = cse_and_gimplify_to_preheader (loop_vinfo,
+ unshare_expr (DR_STEP (dr)));
+ return;
+ }
+
/* The offset given in GS_INFO can have pointer type, so use the element
type of the vector instead. */
tree offset_type = TREE_TYPE (gs_info->offset_vectype);
@@ -9012,10 +9023,20 @@ vectorizable_store (vec_info *vinfo,
gcall *call;
if (final_len && final_mask)
- call = gimple_build_call_internal
- (IFN_MASK_LEN_SCATTER_STORE, 7, dataref_ptr,
- vec_offset, scale, vec_oprnd, final_mask,
- final_len, bias);
+ {
+ if (VECTOR_TYPE_P (TREE_TYPE (vec_offset)))
+ call = gimple_build_call_internal (
+ IFN_MASK_LEN_SCATTER_STORE, 7, dataref_ptr,
+ vec_offset, scale, vec_oprnd, final_mask, final_len,
+ bias);
+ else
+ /* non-vector type offset means that target prefers to
+ use MASK_LEN_STRIDED_STORE instead of
+ MASK_LEN_GATHER_STORE with direct stride argument. */
+ call = gimple_build_call_internal (
+ IFN_MASK_LEN_STRIDED_STORE, 6, dataref_ptr,
+ vec_offset, vec_oprnd, final_mask, final_len, bias);
+ }
else if (final_mask)
call = gimple_build_call_internal
(IFN_MASK_SCATTER_STORE, 5, dataref_ptr,
@@ -10956,11 +10977,19 @@ vectorizable_load (vec_info *vinfo,
gcall *call;
if (final_len && final_mask)
- call
- = gimple_build_call_internal (IFN_MASK_LEN_GATHER_LOAD, 7,
- dataref_ptr, vec_offset,
- scale, zero, final_mask,
- final_len, bias);
+ {
+ if (VECTOR_TYPE_P (TREE_TYPE (vec_offset)))
+ call = gimple_build_call_internal (
+ IFN_MASK_LEN_GATHER_LOAD, 7, dataref_ptr, vec_offset,
+ scale, zero, final_mask, final_len, bias);
+ else
+ /* non-vector type offset means that target prefers to
+ use MASK_LEN_STRIDED_LOAD instead of
+ MASK_LEN_GATHER_LOAD with direct stride argument. */
+ call = gimple_build_call_internal (
+ IFN_MASK_LEN_STRIDED_LOAD, 6, dataref_ptr, vec_offset,
+ zero, final_mask, final_len, bias);
+ }
else if (final_mask)
call = gimple_build_call_internal (IFN_MASK_GATHER_LOAD, 5,
dataref_ptr, vec_offset,
--
2.36.3
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] VECT: Add MASK_LEN_STRIDED_LOAD/MASK_LEN_STRIDED_STORE into loop vectorizer
2023-11-14 3:46 [PATCH] VECT: Add MASK_LEN_STRIDED_LOAD/MASK_LEN_STRIDED_STORE into loop vectorizer Juzhe-Zhong
@ 2023-11-16 7:22 ` juzhe.zhong
0 siblings, 0 replies; 2+ messages in thread
From: juzhe.zhong @ 2023-11-16 7:22 UTC (permalink / raw)
To: 钟居哲, gcc-patches; +Cc: richard.sandiford, rguenther
[-- Attachment #1: Type: text/plain, Size: 4350 bytes --]
Just finished X86 bootstrap && regtest no regression
And tested on aarch64 no regression.
juzhe.zhong@rivai.ai
From: Juzhe-Zhong
Date: 2023-11-14 11:46
To: gcc-patches
CC: richard.sandiford; rguenther; Juzhe-Zhong
Subject: [PATCH] VECT: Add MASK_LEN_STRIDED_LOAD/MASK_LEN_STRIDED_STORE into loop vectorizer
This patch support generating MASK_LEN_STRIDED_LOAD/MASK_LEN_STRIDED_STORE IR
for invariant stride memory access.
It's a special optimization for targets like RVV.
RVV has both indexed load/store and stride load/store.
In RVV, we always have gather/scatter and strided optab at the same time.
E.g.
void foo (int *__restrict a,
int * __restrict b, int n, int *__restrict indice)
{
for (int i = 0; i < n; i++)
a[indice[i]] = b[indice[i]] + a[i];
}
Such vector codes, RVV is using indexed load/store for gather/scatter.
E.g.
void foo (int *__restrict a,
int * __restrict b, int n, int m)
{
for (int i = 0; i < n; i++)
a[i] = b[i * m] + a[i];
}
Such vector codes, RVV is using stride load/store instructions.
We only need to support direct mask_len_stride_xxx optab for invariant stride.
gcc/ChangeLog:
* tree-vect-stmts.cc (vect_get_strided_load_store_ops): Add MASK_LEN_STRIDED_LOAD/MASK_LEN_STRIDED_STORE.
(vectorizable_store): Ditto.
(vectorizable_load): Ditto.
---
gcc/tree-vect-stmts.cc | 47 ++++++++++++++++++++++++++++++++++--------
1 file changed, 38 insertions(+), 9 deletions(-)
diff --git a/gcc/tree-vect-stmts.cc b/gcc/tree-vect-stmts.cc
index ee89f47c468..9c65b688510 100644
--- a/gcc/tree-vect-stmts.cc
+++ b/gcc/tree-vect-stmts.cc
@@ -2863,6 +2863,17 @@ vect_get_strided_load_store_ops (stmt_vec_info stmt_info,
*dataref_bump = cse_and_gimplify_to_preheader (loop_vinfo, bump);
}
+ /* Target supports strided load/store use DR_STEP as stride for VEC_OFFSET
+ directly instead of build VEC_OFFSET with VEC_SERIES. */
+ internal_fn ifn
+ = DR_IS_READ (dr) ? IFN_MASK_LEN_STRIDED_LOAD : IFN_MASK_LEN_STRIDED_STORE;
+ if (direct_internal_fn_supported_p (ifn, vectype, OPTIMIZE_FOR_SPEED))
+ {
+ *vec_offset = cse_and_gimplify_to_preheader (loop_vinfo,
+ unshare_expr (DR_STEP (dr)));
+ return;
+ }
+
/* The offset given in GS_INFO can have pointer type, so use the element
type of the vector instead. */
tree offset_type = TREE_TYPE (gs_info->offset_vectype);
@@ -9012,10 +9023,20 @@ vectorizable_store (vec_info *vinfo,
gcall *call;
if (final_len && final_mask)
- call = gimple_build_call_internal
- (IFN_MASK_LEN_SCATTER_STORE, 7, dataref_ptr,
- vec_offset, scale, vec_oprnd, final_mask,
- final_len, bias);
+ {
+ if (VECTOR_TYPE_P (TREE_TYPE (vec_offset)))
+ call = gimple_build_call_internal (
+ IFN_MASK_LEN_SCATTER_STORE, 7, dataref_ptr,
+ vec_offset, scale, vec_oprnd, final_mask, final_len,
+ bias);
+ else
+ /* non-vector type offset means that target prefers to
+ use MASK_LEN_STRIDED_STORE instead of
+ MASK_LEN_GATHER_STORE with direct stride argument. */
+ call = gimple_build_call_internal (
+ IFN_MASK_LEN_STRIDED_STORE, 6, dataref_ptr,
+ vec_offset, vec_oprnd, final_mask, final_len, bias);
+ }
else if (final_mask)
call = gimple_build_call_internal
(IFN_MASK_SCATTER_STORE, 5, dataref_ptr,
@@ -10956,11 +10977,19 @@ vectorizable_load (vec_info *vinfo,
gcall *call;
if (final_len && final_mask)
- call
- = gimple_build_call_internal (IFN_MASK_LEN_GATHER_LOAD, 7,
- dataref_ptr, vec_offset,
- scale, zero, final_mask,
- final_len, bias);
+ {
+ if (VECTOR_TYPE_P (TREE_TYPE (vec_offset)))
+ call = gimple_build_call_internal (
+ IFN_MASK_LEN_GATHER_LOAD, 7, dataref_ptr, vec_offset,
+ scale, zero, final_mask, final_len, bias);
+ else
+ /* non-vector type offset means that target prefers to
+ use MASK_LEN_STRIDED_LOAD instead of
+ MASK_LEN_GATHER_LOAD with direct stride argument. */
+ call = gimple_build_call_internal (
+ IFN_MASK_LEN_STRIDED_LOAD, 6, dataref_ptr, vec_offset,
+ zero, final_mask, final_len, bias);
+ }
else if (final_mask)
call = gimple_build_call_internal (IFN_MASK_GATHER_LOAD, 5,
dataref_ptr, vec_offset,
--
2.36.3
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-11-16 7:22 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-11-14 3:46 [PATCH] VECT: Add MASK_LEN_STRIDED_LOAD/MASK_LEN_STRIDED_STORE into loop vectorizer Juzhe-Zhong
2023-11-16 7:22 ` juzhe.zhong
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).