* [PATCH v2] rs6000: fmr gets used instead of faster xxlor [PR93571]
@ 2023-02-25 9:50 Ajit Agarwal
2023-06-12 8:43 ` [PING] " Ajit Agarwal
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Ajit Agarwal @ 2023-02-25 9:50 UTC (permalink / raw)
To: gcc-patches; +Cc: Segher Boessenkool, bergner
Hello All:
Here is the patch that uses xxlor instead of fmr where possible.
Performance results shows that fmr is better in power9 and
power10 architectures whereas xxlor is better in power7 and
power 8 architectures. fmr is the only option before p7.
Bootstrapped and regtested on powerpc64-linux-gnu
Thanks & Regards
Ajit
rs6000: Use xxlor instead of fmr where possible
Replaces fmr with xxlor instruction for power7 and power8
architectures whereas for power9 and power10 keep fmr
instruction.
Perf measurement results:
Power9 fmr: 201,847,661 cycles.
Power9 xxlor: 201,877,78 cycles.
Power8 fmr: 200,901,043 cycles.
Power8 xxlor: 201,020,518 cycles.
Power7 fmr: 201,059,524 cycles.
Power7 xxlor: 201,042,851 cycles.
2023-02-25 Ajit Kumar Agarwal <aagarwa1@linux.ibm.com>
gcc/ChangeLog:
* config/rs6000/rs6000.md (*movdf_hardfloat64): Use xxlor for power7
and power8 and fmr for power9 and power10.
---
gcc/config/rs6000/rs6000.md | 44 +++++++++++++++++++++++--------------
1 file changed, 28 insertions(+), 16 deletions(-)
diff --git a/gcc/config/rs6000/rs6000.md b/gcc/config/rs6000/rs6000.md
index 81bffb04ceb..e101f7f5fc1 100644
--- a/gcc/config/rs6000/rs6000.md
+++ b/gcc/config/rs6000/rs6000.md
@@ -354,7 +354,7 @@ (define_attr "cpu"
(const (symbol_ref "(enum attr_cpu) rs6000_tune")))
;; The ISA we implement.
-(define_attr "isa" "any,p5,p6,p7,p7v,p8v,p9,p9v,p9kf,p9tf,p10"
+(define_attr "isa" "any,p5,p6,p7,p7v,p8v,p7p8v,p9,p9v,p9kf,p9tf,p10"
(const_string "any"))
;; Is this alternative enabled for the current CPU/ISA/etc.?
@@ -402,6 +402,11 @@ (define_attr "enabled" ""
(and (eq_attr "isa" "p10")
(match_test "TARGET_POWER10"))
(const_int 1)
+
+ (and (eq_attr "isa" "p7p8v")
+ (match_test "TARGET_VSX && !TARGET_P9_VECTOR"))
+ (const_int 1)
+
] (const_int 0)))
;; If this instruction is microcoded on the CELL processor
@@ -8436,27 +8441,29 @@ (define_insn "*mov<mode>_softfloat32"
(define_insn "*mov<mode>_hardfloat64"
[(set (match_operand:FMOVE64 0 "nonimmediate_operand"
- "=m, d, d, <f64_p9>, wY,
- <f64_av>, Z, <f64_vsx>, <f64_vsx>, !r,
+ "=m, d, <f64_vsx>, <f64_p9>, wY,
+ <f64_av>, Z, wa, <f64_vsx>, !r,
YZ, r, !r, *c*l, !r,
- *h, r, <f64_dm>, wa")
+ *h, r, <f64_dm>, d, wn,
+ wa")
(match_operand:FMOVE64 1 "input_operand"
- "d, m, d, wY, <f64_p9>,
- Z, <f64_av>, <f64_vsx>, <zero_fp>, <zero_fp>,
+ "d, m, <f64_vsx>, wY, <f64_p9>,
+ Z, <f64_av>, wa, <zero_fp>, <zero_fp>,
r, YZ, r, r, *h,
- 0, <f64_dm>, r, eP"))]
+ 0, <f64_dm>, r, d, wn,
+ eP"))]
"TARGET_POWERPC64 && TARGET_HARD_FLOAT
&& (gpc_reg_operand (operands[0], <MODE>mode)
|| gpc_reg_operand (operands[1], <MODE>mode))"
"@
stfd%U0%X0 %1,%0
lfd%U1%X1 %0,%1
- fmr %0,%1
+ xxlor %x0,%x1,%x1
lxsd %0,%1
stxsd %1,%0
lxsdx %x0,%y1
stxsdx %x1,%y0
- xxlor %x0,%x1,%x1
+ fmr %0,%1
xxlxor %x0,%x0,%x0
li %0,0
std%U0%X0 %1,%0
@@ -8467,23 +8474,28 @@ (define_insn "*mov<mode>_hardfloat64"
nop
mfvsrd %0,%x1
mtvsrd %x0,%1
+ fmr %0,%1
+ fmr %0,%1
#"
[(set_attr "type"
- "fpstore, fpload, fpsimple, fpload, fpstore,
+ "fpstore, fpload, veclogical, fpload, fpstore,
fpload, fpstore, veclogical, veclogical, integer,
store, load, *, mtjmpr, mfjmpr,
- *, mfvsr, mtvsr, vecperm")
+ *, mfvsr, mtvsr, fpsimple, fpsimple,
+ vecperm")
(set_attr "size" "64")
(set_attr "isa"
- "*, *, *, p9v, p9v,
- p7v, p7v, *, *, *,
- *, *, *, *, *,
- *, p8v, p8v, p10")
+ "*, *, p7p8v, p9v, p9v,
+ p7v, p7v, *, *, *,
+ *, *, *, *, *,
+ *, p8v, p8v, *, *,
+ p10")
(set_attr "prefixed"
"*, *, *, *, *,
*, *, *, *, *,
*, *, *, *, *,
- *, *, *, *")])
+ *, *, *, *, *,
+ *")])
;; STD LD MR MT<SPR> MF<SPR> G-const
;; H-const F-const Special
--
2.31.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PING] [PATCH v2] rs6000: fmr gets used instead of faster xxlor [PR93571]
2023-02-25 9:50 [PATCH v2] rs6000: fmr gets used instead of faster xxlor [PR93571] Ajit Agarwal
@ 2023-06-12 8:43 ` Ajit Agarwal
2023-06-12 12:51 ` Segher Boessenkool
2023-06-14 6:59 ` Surya Kumari Jangala
2 siblings, 0 replies; 4+ messages in thread
From: Ajit Agarwal @ 2023-06-12 8:43 UTC (permalink / raw)
To: gcc-patches; +Cc: Segher Boessenkool, bergner
Hello Segher:
Please review and let me know your feedback to submit in trunk.
Thanks & Regards
Ajit
On 25/02/23 3:20 pm, Ajit Agarwal via Gcc-patches wrote:
> Hello All:
>
> Here is the patch that uses xxlor instead of fmr where possible.
> Performance results shows that fmr is better in power9 and
> power10 architectures whereas xxlor is better in power7 and
> power 8 architectures. fmr is the only option before p7.
>
> Bootstrapped and regtested on powerpc64-linux-gnu
>
> Thanks & Regards
> Ajit
>
> rs6000: Use xxlor instead of fmr where possible
>
> Replaces fmr with xxlor instruction for power7 and power8
> architectures whereas for power9 and power10 keep fmr
> instruction.
>
> Perf measurement results:
>
> Power9 fmr: 201,847,661 cycles.
> Power9 xxlor: 201,877,78 cycles.
> Power8 fmr: 200,901,043 cycles.
> Power8 xxlor: 201,020,518 cycles.
> Power7 fmr: 201,059,524 cycles.
> Power7 xxlor: 201,042,851 cycles.
>
> 2023-02-25 Ajit Kumar Agarwal <aagarwa1@linux.ibm.com>
>
> gcc/ChangeLog:
>
> * config/rs6000/rs6000.md (*movdf_hardfloat64): Use xxlor for power7
> and power8 and fmr for power9 and power10.
> ---
> gcc/config/rs6000/rs6000.md | 44 +++++++++++++++++++++++--------------
> 1 file changed, 28 insertions(+), 16 deletions(-)
>
> diff --git a/gcc/config/rs6000/rs6000.md b/gcc/config/rs6000/rs6000.md
> index 81bffb04ceb..e101f7f5fc1 100644
> --- a/gcc/config/rs6000/rs6000.md
> +++ b/gcc/config/rs6000/rs6000.md
> @@ -354,7 +354,7 @@ (define_attr "cpu"
> (const (symbol_ref "(enum attr_cpu) rs6000_tune")))
>
> ;; The ISA we implement.
> -(define_attr "isa" "any,p5,p6,p7,p7v,p8v,p9,p9v,p9kf,p9tf,p10"
> +(define_attr "isa" "any,p5,p6,p7,p7v,p8v,p7p8v,p9,p9v,p9kf,p9tf,p10"
> (const_string "any"))
>
> ;; Is this alternative enabled for the current CPU/ISA/etc.?
> @@ -402,6 +402,11 @@ (define_attr "enabled" ""
> (and (eq_attr "isa" "p10")
> (match_test "TARGET_POWER10"))
> (const_int 1)
> +
> + (and (eq_attr "isa" "p7p8v")
> + (match_test "TARGET_VSX && !TARGET_P9_VECTOR"))
> + (const_int 1)
> +
> ] (const_int 0)))
>
> ;; If this instruction is microcoded on the CELL processor
> @@ -8436,27 +8441,29 @@ (define_insn "*mov<mode>_softfloat32"
>
> (define_insn "*mov<mode>_hardfloat64"
> [(set (match_operand:FMOVE64 0 "nonimmediate_operand"
> - "=m, d, d, <f64_p9>, wY,
> - <f64_av>, Z, <f64_vsx>, <f64_vsx>, !r,
> + "=m, d, <f64_vsx>, <f64_p9>, wY,
> + <f64_av>, Z, wa, <f64_vsx>, !r,
> YZ, r, !r, *c*l, !r,
> - *h, r, <f64_dm>, wa")
> + *h, r, <f64_dm>, d, wn,
> + wa")
> (match_operand:FMOVE64 1 "input_operand"
> - "d, m, d, wY, <f64_p9>,
> - Z, <f64_av>, <f64_vsx>, <zero_fp>, <zero_fp>,
> + "d, m, <f64_vsx>, wY, <f64_p9>,
> + Z, <f64_av>, wa, <zero_fp>, <zero_fp>,
> r, YZ, r, r, *h,
> - 0, <f64_dm>, r, eP"))]
> + 0, <f64_dm>, r, d, wn,
> + eP"))]
> "TARGET_POWERPC64 && TARGET_HARD_FLOAT
> && (gpc_reg_operand (operands[0], <MODE>mode)
> || gpc_reg_operand (operands[1], <MODE>mode))"
> "@
> stfd%U0%X0 %1,%0
> lfd%U1%X1 %0,%1
> - fmr %0,%1
> + xxlor %x0,%x1,%x1
> lxsd %0,%1
> stxsd %1,%0
> lxsdx %x0,%y1
> stxsdx %x1,%y0
> - xxlor %x0,%x1,%x1
> + fmr %0,%1
> xxlxor %x0,%x0,%x0
> li %0,0
> std%U0%X0 %1,%0
> @@ -8467,23 +8474,28 @@ (define_insn "*mov<mode>_hardfloat64"
> nop
> mfvsrd %0,%x1
> mtvsrd %x0,%1
> + fmr %0,%1
> + fmr %0,%1
> #"
> [(set_attr "type"
> - "fpstore, fpload, fpsimple, fpload, fpstore,
> + "fpstore, fpload, veclogical, fpload, fpstore,
> fpload, fpstore, veclogical, veclogical, integer,
> store, load, *, mtjmpr, mfjmpr,
> - *, mfvsr, mtvsr, vecperm")
> + *, mfvsr, mtvsr, fpsimple, fpsimple,
> + vecperm")
> (set_attr "size" "64")
> (set_attr "isa"
> - "*, *, *, p9v, p9v,
> - p7v, p7v, *, *, *,
> - *, *, *, *, *,
> - *, p8v, p8v, p10")
> + "*, *, p7p8v, p9v, p9v,
> + p7v, p7v, *, *, *,
> + *, *, *, *, *,
> + *, p8v, p8v, *, *,
> + p10")
> (set_attr "prefixed"
> "*, *, *, *, *,
> *, *, *, *, *,
> *, *, *, *, *,
> - *, *, *, *")])
> + *, *, *, *, *,
> + *")])
>
> ;; STD LD MR MT<SPR> MF<SPR> G-const
> ;; H-const F-const Special
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2] rs6000: fmr gets used instead of faster xxlor [PR93571]
2023-02-25 9:50 [PATCH v2] rs6000: fmr gets used instead of faster xxlor [PR93571] Ajit Agarwal
2023-06-12 8:43 ` [PING] " Ajit Agarwal
@ 2023-06-12 12:51 ` Segher Boessenkool
2023-06-14 6:59 ` Surya Kumari Jangala
2 siblings, 0 replies; 4+ messages in thread
From: Segher Boessenkool @ 2023-06-12 12:51 UTC (permalink / raw)
To: Ajit Agarwal; +Cc: gcc-patches, bergner
Hi!
On Sat, Feb 25, 2023 at 03:20:33PM +0530, Ajit Agarwal wrote:
> Here is the patch that uses xxlor instead of fmr where possible.
> Performance results shows that fmr is better in power9 and
> power10 architectures whereas xxlor is better in power7 and
> power 8 architectures. fmr is the only option before p7.
> ;; The ISA we implement.
> -(define_attr "isa" "any,p5,p6,p7,p7v,p8v,p9,p9v,p9kf,p9tf,p10"
> +(define_attr "isa" "any,p5,p6,p7,p7v,p8v,p7p8v,p9,p9v,p9kf,p9tf,p10"
> (const_string "any"))
This isn't really about what insn we *can* use here.
> + (and (eq_attr "isa" "p7p8v")
> + (match_test "TARGET_VSX && !TARGET_P9_VECTOR"))
> + (const_int 1)
What is needed here is test the *tune* setting. For example if someone
uses -mcpu=power8 -mtune=power9 (this is a setting that is really used,
or was a few years ago anyway) you *do* want fmr insns generated.
So don't do this via the isa attribute at all, just add some insn
condition (testing the tune setting)?
Segher
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2] rs6000: fmr gets used instead of faster xxlor [PR93571]
2023-02-25 9:50 [PATCH v2] rs6000: fmr gets used instead of faster xxlor [PR93571] Ajit Agarwal
2023-06-12 8:43 ` [PING] " Ajit Agarwal
2023-06-12 12:51 ` Segher Boessenkool
@ 2023-06-14 6:59 ` Surya Kumari Jangala
2 siblings, 0 replies; 4+ messages in thread
From: Surya Kumari Jangala @ 2023-06-14 6:59 UTC (permalink / raw)
To: Ajit Agarwal, gcc-patches; +Cc: Segher Boessenkool, bergner
On 25/02/23 3:20 pm, Ajit Agarwal via Gcc-patches wrote:
> Hello All:
>
> Here is the patch that uses xxlor instead of fmr where possible.
> Performance results shows that fmr is better in power9 and
> power10 architectures whereas xxlor is better in power7 and
> power 8 architectures. fmr is the only option before p7.
>
> Bootstrapped and regtested on powerpc64-linux-gnu
>
> Thanks & Regards
> Ajit
>
> rs6000: Use xxlor instead of fmr where possible
>
> Replaces fmr with xxlor instruction for power7 and power8
> architectures whereas for power9 and power10 keep fmr
> instruction.
>
> Perf measurement results:
>
> Power9 fmr: 201,847,661 cycles.
> Power9 xxlor: 201,877,78 cycles.
> Power8 fmr: 200,901,043 cycles.
> Power8 xxlor: 201,020,518 cycles.
'fmr' is better than 'xxlor' for power8 according to the above numbers. Should we then replace fmr with xxlor?
-Surya
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2023-06-14 6:59 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-02-25 9:50 [PATCH v2] rs6000: fmr gets used instead of faster xxlor [PR93571] Ajit Agarwal
2023-06-12 8:43 ` [PING] " Ajit Agarwal
2023-06-12 12:51 ` Segher Boessenkool
2023-06-14 6:59 ` Surya Kumari Jangala
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).