[PATCH v2] rs6000: Fix __builtin_altivec_vcmpne{b,h,w} implementation

[PATCH v2] rs6000: Fix __builtin_altivec_vcmpne{b,h,w} implementation

[Carl Love]

GCC maintainers:

Ver 2:  Re-worked the test vec-cmpne.c to create a compile only test
verify the instruction generation and a runnable test to verify the
built-in functionality.  Retested the patch on Power 8 LE/BE, Power 9LE/BE and Power 10 LE with no regressions.

The following patch cleans up the definition for the
__builtin_altivec_vcmpne{b,h,w}.  The current implementation implies
that the built-in is only supported on Power 9 since it is defined
under the Power 9 stanza.  However the built-in has no ISA restrictions
as stated in the Power Vector Intrinsic Programming Reference document.
The current built-in works because the built-in gets replaced during
GIMPLE folding by a simple not-equal operator so it doesn't get
expanded and checked for Power 9 code generation.

This patch moves the definition to the Altivec stanza in the built-in
definition file to make it clear the built-ins are valid for Power 8,
Power 9 and beyond.  

The patch has been tested on Power 8 LE/BE, Power 9 LE/BE and Power 10
LE with no regressions.

Please let me know if the patch is acceptable for mainline.  Thanks.

                      Carl 

------------------------------------------------
rs6000: Fix __builtin_altivec_vcmpne{b,h,w} implementation

The current built-in definitions for vcmpneb, vcmpneh, vcmpnew are defined
under the Power 9 section of r66000-builtins.  This implies they are only
supported on Power 9 and above when in fact they are defined and work with
Altivec as well with the appropriate Altivec instruction generation.

The vec_cmpne builtin should generate the vcmpequ{b,h,w} instruction with
Altivec enabled and generate the vcmpne{b,h,w} on Power 9 and newer
processors.

This patch moves the definitions to the Altivec stanza to make it clear
the built-ins are supported for all Altivec processors.  The patch
enables the vcmpequ{b,h,w} instruction to be generated on Altivec and
the vcmpne{b,h,w} instruction to be generated on Power 9 and beyond.

There is existing test coverage for the vec_cmpne built-in for
vector bool char, vector bool short, vector bool int,
vector bool long long in builtins-3-p9.c and p8vector-builtin-2.c.
Coverage for vector signed int, vector unsigned int is in
p8vector-builtin-2.c.

Test vec-cmpne.c is updated to check the generation of the vcmpequ{b,h,w}
instructions for Altivec.  A new test vec-cmpne-runnable.c is added to
verify the built-ins work as expected.

Patch has been tested on Power 8 LE/BE, Power 9 LE/BE and Power 10 LE
with no regressions.

gcc/ChangeLog:

	* config/rs6000/rs6000-builtins.def (vcmpneb, vcmpneh, vcmpnew):
	Move definitions to Altivec stanza.
	* config/rs6000/altivec.md (vcmpneb, vcmpneh, vcmpnew): New
	define_expand.

gcc/testsuite/ChangeLog:

	* gcc.target/powerpc/vec-cmpne-runnable.c: New execution test.
	* gcc.target/powerpc/vec-cmpne.c (define_test_functions,
	execute_test_functions) moved to vec-cmpne.h.  Added
	scan-assembler-times for vcmpequb, vcmpequh, vcmpequw.
	* gcc.target/powerpc/vec-cmpne.h: New include file for vec-cmpne.c
	and vec-cmpne-runnable.c. Split define_test_functions definition
	into define_test_functions and define_init_verify_functions.
---
 gcc/config/rs6000/altivec.md                  |  12 ++
 gcc/config/rs6000/rs6000-builtins.def         |  18 +--
 .../gcc.target/powerpc/vec-cmpne-runnable.c   |  36 ++++++
 gcc/testsuite/gcc.target/powerpc/vec-cmpne.c  | 110 ++----------------
 gcc/testsuite/gcc.target/powerpc/vec-cmpne.h  |  86 ++++++++++++++
 5 files changed, 151 insertions(+), 111 deletions(-)
 create mode 100644 gcc/testsuite/gcc.target/powerpc/vec-cmpne-runnable.c
 create mode 100644 gcc/testsuite/gcc.target/powerpc/vec-cmpne.h

diff --git a/gcc/config/rs6000/altivec.md b/gcc/config/rs6000/altivec.md
index ad1224e0b57..31f65aa1b7a 100644
--- a/gcc/config/rs6000/altivec.md
+++ b/gcc/config/rs6000/altivec.md
@@ -2631,6 +2631,18 @@ (define_insn "altivec_vcmpequt_p"
   "vcmpequq. %0,%1,%2"
   [(set_attr "type" "veccmpfx")])
 
+;; Expand for builtin vcmpne{b,h,w}
+(define_expand "altivec_vcmpne_<mode>"
+  [(set (match_operand:VSX_EXTRACT_I 3 "altivec_register_operand" "=v")
+	(eq:VSX_EXTRACT_I (match_operand:VSX_EXTRACT_I 1 "altivec_register_operand" "v")
+			  (match_operand:VSX_EXTRACT_I 2 "altivec_register_operand" "v")))
+   (set (match_operand:VSX_EXTRACT_I 0 "altivec_register_operand" "=v")
+        (not:VSX_EXTRACT_I (match_dup 3)))]
+  "TARGET_ALTIVEC"
+  {
+    operands[3] = gen_reg_rtx (GET_MODE (operands[0]));
+  });
+
 (define_insn "*altivec_vcmpgts<VI_char>_p"
   [(set (reg:CC CR6_REGNO)
 	(unspec:CC [(gt:CC (match_operand:VI2 1 "register_operand" "v")
diff --git a/gcc/config/rs6000/rs6000-builtins.def b/gcc/config/rs6000/rs6000-builtins.def
index 638d0bc72ca..6b06fa8b34d 100644
--- a/gcc/config/rs6000/rs6000-builtins.def
+++ b/gcc/config/rs6000/rs6000-builtins.def
@@ -641,6 +641,15 @@
   const int __builtin_altivec_vcmpgtuw_p (int, vsi, vsi);
     VCMPGTUW_P vector_gtu_v4si_p {pred}
 
+  const vsc __builtin_altivec_vcmpneb (vsc, vsc);
+    VCMPNEB altivec_vcmpne_v16qi {}
+
+  const vss __builtin_altivec_vcmpneh (vss, vss);
+    VCMPNEH altivec_vcmpne_v8hi {}
+
+  const vsi __builtin_altivec_vcmpnew (vsi, vsi);
+    VCMPNEW altivec_vcmpne_v4si {}
+
   const vsi __builtin_altivec_vctsxs (vf, const int<5>);
     VCTSXS altivec_vctsxs {}
 
@@ -2599,9 +2608,6 @@
   const signed int __builtin_altivec_vcmpaew_p (vsi, vsi);
     VCMPAEW_P vector_ae_v4si_p {}
 
-  const vsc __builtin_altivec_vcmpneb (vsc, vsc);
-    VCMPNEB vcmpneb {}
-
   const signed int __builtin_altivec_vcmpneb_p (vsc, vsc);
     VCMPNEB_P vector_ne_v16qi_p {}
 
@@ -2614,15 +2620,9 @@
   const signed int __builtin_altivec_vcmpnefp_p (vf, vf);
     VCMPNEFP_P vector_ne_v4sf_p {}
 
-  const vss __builtin_altivec_vcmpneh (vss, vss);
-    VCMPNEH vcmpneh {}
-
   const signed int __builtin_altivec_vcmpneh_p (vss, vss);
     VCMPNEH_P vector_ne_v8hi_p {}
 
-  const vsi __builtin_altivec_vcmpnew (vsi, vsi);
-    VCMPNEW vcmpnew {}
-
   const signed int __builtin_altivec_vcmpnew_p (vsi, vsi);
     VCMPNEW_P vector_ne_v4si_p {}
 
diff --git a/gcc/testsuite/gcc.target/powerpc/vec-cmpne-runnable.c b/gcc/testsuite/gcc.target/powerpc/vec-cmpne-runnable.c
new file mode 100644
index 00000000000..be038639a6c
--- /dev/null
+++ b/gcc/testsuite/gcc.target/powerpc/vec-cmpne-runnable.c
@@ -0,0 +1,36 @@
+/* { dg-do run } */
+/* { dg-require-effective-target powerpc_altivec_ok } */
+/* { dg-options "-mvsx -O3 " } */
+
+/* Test that the vec_cmpne builtin works as expected.  */
+
+#include "vec-cmpne.h"
+
+define_test_functions (int, signed int, signed int, si);
+define_test_functions (int, unsigned int, unsigned int, ui);
+define_test_functions (short, signed short, signed short, ss);
+define_test_functions (short, unsigned short, unsigned short, us);
+define_test_functions (char, signed char, signed char, sc);
+define_test_functions (char, unsigned char, unsigned char, uc);
+define_test_functions (int, signed int, float, ff);
+
+define_init_verify_functions (int, signed int, signed int, si);
+define_init_verify_functions (int, unsigned int, unsigned int, ui);
+define_init_verify_functions (short, signed short, signed short, ss);
+define_init_verify_functions (short, unsigned short, unsigned short, us);
+define_init_verify_functions (char, signed char, signed char, sc);
+define_init_verify_functions (char, unsigned char, unsigned char, uc);
+define_init_verify_functions (int, signed int, float, ff);
+
+int main ()
+{
+  execute_test_functions (int, signed int, signed int, si);
+  execute_test_functions (int, unsigned int, unsigned int, ui);
+  execute_test_functions (short, signed short, signed short, ss);
+  execute_test_functions (short, unsigned short, unsigned short, us);
+  execute_test_functions (char, signed char, signed char, sc);
+  execute_test_functions (char, unsigned char, unsigned char, uc);
+  execute_test_functions (int, signed int, float, ff);
+
+  return 0;
+}
diff --git a/gcc/testsuite/gcc.target/powerpc/vec-cmpne.c b/gcc/testsuite/gcc.target/powerpc/vec-cmpne.c
index edba9dece66..8ceddd5cc3f 100644
--- a/gcc/testsuite/gcc.target/powerpc/vec-cmpne.c
+++ b/gcc/testsuite/gcc.target/powerpc/vec-cmpne.c
@@ -1,94 +1,11 @@
-/* { dg-do run } */
-/* { dg-require-effective-target powerpc_vsx_ok } */
+/* { dg-do compile } */
+/* { dg-require-effective-target powerpc_altivec_ok } */
 /* { dg-options "-mvsx -O3" } */
 
-/* Test that the vec_cmpne builtin works as expected.  */
-
-#include "altivec.h"
-
-#define N 4096
-
-void abort ();
-
-#define define_test_functions(VBTYPE, RTYPE, STYPE, NAME) \
-\
-RTYPE result_ne_##NAME[N] __attribute__((aligned(16))); \
-RTYPE result_eq_##NAME[N] __attribute__((aligned(16))); \
-STYPE operand1_##NAME[N] __attribute__((aligned(16))); \
-STYPE operand2_##NAME[N] __attribute__((aligned(16))); \
-RTYPE expected_##NAME[N] __attribute__((aligned(16))); \
-\
-__attribute__((noinline)) void vector_tests_##NAME () \
-{ \
-  vector STYPE v1_##NAME, v2_##NAME; \
-  vector bool VBTYPE tmp_##NAME; \
-  int i; \
-  for (i = 0; i < N; i+=16/sizeof (STYPE)) \
-    { \
-      /* result_ne = operand1!=operand2.  */ \
-      v1_##NAME = vec_vsx_ld (0, (const vector STYPE*)&operand1_##NAME[i]); \
-      v2_##NAME = vec_vsx_ld (0, (const vector STYPE*)&operand2_##NAME[i]); \
-\
-      tmp_##NAME = vec_cmpeq (v1_##NAME, v2_##NAME); \
-      vec_vsx_st (tmp_##NAME, 0, &result_eq_##NAME[i]); \
-\
-      tmp_##NAME = vec_cmpne (v1_##NAME, v2_##NAME); \
-      vec_vsx_st (tmp_##NAME, 0, &result_ne_##NAME[i]); \
-    } \
-} \
-\
-__attribute__((noinline)) void init_##NAME () \
-{ \
-  int i; \
-  for (i = 0; i < N; ++i) \
-    { \
-      result_ne_##NAME[i] = 7; \
-      result_eq_##NAME[i] = 15; \
-      if (i%3 == 0) \
-	{ \
-	  /* op1 < op2.  */ \
-	  operand1_##NAME[i] = 1; \
-	  operand2_##NAME[i] = 2; \
-	} \
-      else if (i%3 == 1) \
-	{ \
-	  /* op1 > op2.  */ \
-	  operand1_##NAME[i] = 2; \
-	  operand2_##NAME[i] = 1; \
-	} \
-      else if (i%3 == 2) \
-	{ \
-	  /* op1 == op2.  */ \
-	  operand1_##NAME[i] = 3; \
-	  operand2_##NAME[i] = 3; \
-	} \
-      /* For vector comparisons: "For each element of the result_ne, the \
-	  value of each bit is 1 if the corresponding elements of ARG1 and \
-	  ARG2 are equal." {or whatever the comparison is} "Otherwise, the \
-	  value of each bit is 0."  */ \
-    expected_##NAME[i] = -1 * (RTYPE)(operand1_##NAME[i] != operand2_##NAME[i]); \
-  } \
-} \
-\
-__attribute__((noinline)) void verify_results_##NAME () \
-{ \
-  int i; \
-  for (i = 0; i < N; ++i) \
-    { \
-      if ( ((result_ne_##NAME[i] != expected_##NAME[i]) || \
-	    (result_ne_##NAME[i] == result_eq_##NAME[i]))) \
-	abort (); \
-    } \
-}
-
-
-#define execute_test_functions(VBTYPE, RTYPE, STYPE, NAME) \
-{ \
-  init_##NAME (); \
-  vector_tests_##NAME (); \
-  verify_results_##NAME (); \
-}
+/* Test that the vec_cmpne builtin generates the expected Altive
+   instructions.  */
 
+#include "vec-cmpne.h"
 
 define_test_functions (int, signed int, signed int, si);
 define_test_functions (int, unsigned int, unsigned int, ui);
@@ -98,17 +15,6 @@ define_test_functions (char, signed char, signed char, sc);
 define_test_functions (char, unsigned char, unsigned char, uc);
 define_test_functions (int, signed int, float, ff);
 
-int main ()
-{
-  execute_test_functions (int, signed int, signed int, si);
-  execute_test_functions (int, unsigned int, unsigned int, ui);
-  execute_test_functions (short, signed short, signed short, ss);
-  execute_test_functions (short, unsigned short, unsigned short, us);
-  execute_test_functions (char, signed char, signed char, sc);
-  execute_test_functions (char, unsigned char, unsigned char, uc);
-  execute_test_functions (int, signed int, float, ff);
-
-  return 0;
-}
-
-
+/* { dg-final { scan-assembler-times {\mvcmpequb\M}  4 } } */
+/* { dg-final { scan-assembler-times {\mvcmpequh\M}  4 } } */
+/* { dg-final { scan-assembler-times {\mvcmpequw\M}  4 } } */
diff --git a/gcc/testsuite/gcc.target/powerpc/vec-cmpne.h b/gcc/testsuite/gcc.target/powerpc/vec-cmpne.h
new file mode 100644
index 00000000000..45c34d31d0e
--- /dev/null
+++ b/gcc/testsuite/gcc.target/powerpc/vec-cmpne.h
@@ -0,0 +1,86 @@
+#include "altivec.h"
+
+#define N 4096
+
+void abort ();
+
+#define define_test_functions(VBTYPE, RTYPE, STYPE, NAME) \
+\
+RTYPE result_ne_##NAME[N] __attribute__((aligned(16))); \
+RTYPE result_eq_##NAME[N] __attribute__((aligned(16))); \
+STYPE operand1_##NAME[N] __attribute__((aligned(16))); \
+STYPE operand2_##NAME[N] __attribute__((aligned(16))); \
+RTYPE expected_##NAME[N] __attribute__((aligned(16))); \
+\
+__attribute__((noinline)) void vector_tests_##NAME () \
+{ \
+  vector STYPE v1_##NAME, v2_##NAME; \
+  vector bool VBTYPE tmp_##NAME; \
+  int i; \
+  for (i = 0; i < N; i+=16/sizeof (STYPE)) \
+    { \
+      /* result_ne = operand1!=operand2.  */ \
+      v1_##NAME = vec_vsx_ld (0, (const vector STYPE*)&operand1_##NAME[i]); \
+      v2_##NAME = vec_vsx_ld (0, (const vector STYPE*)&operand2_##NAME[i]); \
+\
+      tmp_##NAME = vec_cmpeq (v1_##NAME, v2_##NAME); \
+      vec_vsx_st (tmp_##NAME, 0, &result_eq_##NAME[i]); \
+\
+      tmp_##NAME = vec_cmpne (v1_##NAME, v2_##NAME); \
+      vec_vsx_st (tmp_##NAME, 0, &result_ne_##NAME[i]); \
+    } \
+} \
+
+#define define_init_verify_functions(VBTYPE, RTYPE, STYPE, NAME) \
+__attribute__((noinline)) void init_##NAME () \
+{ \
+  int i; \
+  for (i = 0; i < N; ++i) \
+    { \
+      result_ne_##NAME[i] = 7; \
+      result_eq_##NAME[i] = 15; \
+      if (i%3 == 0) \
+	{ \
+	  /* op1 < op2.  */ \
+	  operand1_##NAME[i] = 1; \
+	  operand2_##NAME[i] = 2; \
+	} \
+      else if (i%3 == 1) \
+	{ \
+	  /* op1 > op2.  */ \
+	  operand1_##NAME[i] = 2; \
+	  operand2_##NAME[i] = 1; \
+	} \
+      else if (i%3 == 2) \
+	{ \
+	  /* op1 == op2.  */ \
+	  operand1_##NAME[i] = 3; \
+	  operand2_##NAME[i] = 3; \
+	} \
+      /* For vector comparisons: "For each element of the result_ne, the \
+	  value of each bit is 1 if the corresponding elements of ARG1 and \
+	  ARG2 are equal." {or whatever the comparison is} "Otherwise, the \
+	  value of each bit is 0."  */ \
+    expected_##NAME[i] = -1 * (RTYPE)(operand1_##NAME[i] != operand2_##NAME[i]); \
+  } \
+} \
+\
+__attribute__((noinline)) void verify_results_##NAME () \
+{ \
+  int i; \
+  for (i = 0; i < N; ++i) \
+    { \
+      if ( ((result_ne_##NAME[i] != expected_##NAME[i]) || \
+	    (result_ne_##NAME[i] == result_eq_##NAME[i]))) \
+	abort (); \
+    } \
+}
+
+
+#define execute_test_functions(VBTYPE, RTYPE, STYPE, NAME) \
+{ \
+  init_##NAME (); \
+  vector_tests_##NAME (); \
+  verify_results_##NAME (); \
+}
+
-- 
2.37.2

Re: [PATCH v2] rs6000: Fix __builtin_altivec_vcmpne{b,h,w} implementation

[Kewen.Lin]

Hi Carl,

Sorry for the late review.

on 2023/8/2 02:29, Carl Love wrote:
> 
> GCC maintainers:
> 
> Ver 2:  Re-worked the test vec-cmpne.c to create a compile only test
> verify the instruction generation and a runnable test to verify the
> built-in functionality.  Retested the patch on Power 8 LE/BE, Power 9LE/BE and Power 10 LE with no regressions.
> 
> The following patch cleans up the definition for the
> __builtin_altivec_vcmpne{b,h,w}.  The current implementation implies
> that the built-in is only supported on Power 9 since it is defined
> under the Power 9 stanza.  However the built-in has no ISA restrictions
> as stated in the Power Vector Intrinsic Programming Reference document.
> The current built-in works because the built-in gets replaced during
> GIMPLE folding by a simple not-equal operator so it doesn't get
> expanded and checked for Power 9 code generation.
> 
> This patch moves the definition to the Altivec stanza in the built-in
> definition file to make it clear the built-ins are valid for Power 8,
> Power 9 and beyond.  
> 
> The patch has been tested on Power 8 LE/BE, Power 9 LE/BE and Power 10
> LE with no regressions.
> 
> Please let me know if the patch is acceptable for mainline.  Thanks.
> 
>                       Carl 
> 
> ------------------------------------------------
> rs6000: Fix __builtin_altivec_vcmpne{b,h,w} implementation
> 
> The current built-in definitions for vcmpneb, vcmpneh, vcmpnew are defined
> under the Power 9 section of r66000-builtins.  This implies they are only
> supported on Power 9 and above when in fact they are defined and work with
> Altivec as well with the appropriate Altivec instruction generation.
> 
> The vec_cmpne builtin should generate the vcmpequ{b,h,w} instruction with
> Altivec enabled and generate the vcmpne{b,h,w} on Power 9 and newer
> processors.
> 
> This patch moves the definitions to the Altivec stanza to make it clear
> the built-ins are supported for all Altivec processors.  The patch
> enables the vcmpequ{b,h,w} instruction to be generated on Altivec and
> the vcmpne{b,h,w} instruction to be generated on Power 9 and beyond.

But as you noted above, the current built-ins work as expected, that is
to generate with vcmpequ{b,h,w} on altivec but not Power9 while generate
with vcmpne{b,h,w} on Power9.  So I think we shouldn't say it's enabled
by this patch.  Instead it's to remove the confusion.

> 
> There is existing test coverage for the vec_cmpne built-in for
> vector bool char, vector bool short, vector bool int,
> vector bool long long in builtins-3-p9.c and p8vector-builtin-2.c.
> Coverage for vector signed int, vector unsigned int is in
> p8vector-builtin-2.c.
> 
> Test vec-cmpne.c is updated to check the generation of the vcmpequ{b,h,w}
> instructions for Altivec.  A new test vec-cmpne-runnable.c is added to
> verify the built-ins work as expected.
> 
> Patch has been tested on Power 8 LE/BE, Power 9 LE/BE and Power 10 LE
> with no regressions.
> 
> gcc/ChangeLog:
> 
> 	* config/rs6000/rs6000-builtins.def (vcmpneb, vcmpneh, vcmpnew):
> 	Move definitions to Altivec stanza.
> 	* config/rs6000/altivec.md (vcmpneb, vcmpneh, vcmpnew): New
> 	define_expand.
> 
> gcc/testsuite/ChangeLog:
> 
> 	* gcc.target/powerpc/vec-cmpne-runnable.c: New execution test.
> 	* gcc.target/powerpc/vec-cmpne.c (define_test_functions,
> 	execute_test_functions) moved to vec-cmpne.h.  Added
> 	scan-assembler-times for vcmpequb, vcmpequh, vcmpequw.
> 	* gcc.target/powerpc/vec-cmpne.h: New include file for vec-cmpne.c
> 	and vec-cmpne-runnable.c. Split define_test_functions definition
> 	into define_test_functions and define_init_verify_functions.
> ---
>  gcc/config/rs6000/altivec.md                  |  12 ++
>  gcc/config/rs6000/rs6000-builtins.def         |  18 +--
>  .../gcc.target/powerpc/vec-cmpne-runnable.c   |  36 ++++++
>  gcc/testsuite/gcc.target/powerpc/vec-cmpne.c  | 110 ++----------------
>  gcc/testsuite/gcc.target/powerpc/vec-cmpne.h  |  86 ++++++++++++++
>  5 files changed, 151 insertions(+), 111 deletions(-)
>  create mode 100644 gcc/testsuite/gcc.target/powerpc/vec-cmpne-runnable.c
>  create mode 100644 gcc/testsuite/gcc.target/powerpc/vec-cmpne.h
> 
> diff --git a/gcc/config/rs6000/altivec.md b/gcc/config/rs6000/altivec.md
> index ad1224e0b57..31f65aa1b7a 100644
> --- a/gcc/config/rs6000/altivec.md
> +++ b/gcc/config/rs6000/altivec.md
> @@ -2631,6 +2631,18 @@ (define_insn "altivec_vcmpequt_p"
>    "vcmpequq. %0,%1,%2"
>    [(set_attr "type" "veccmpfx")])
>  
> +;; Expand for builtin vcmpne{b,h,w}
> +(define_expand "altivec_vcmpne_<mode>"
> +  [(set (match_operand:VSX_EXTRACT_I 3 "altivec_register_operand" "=v")
> +	(eq:VSX_EXTRACT_I (match_operand:VSX_EXTRACT_I 1 "altivec_register_operand" "v")
> +			  (match_operand:VSX_EXTRACT_I 2 "altivec_register_operand" "v")))
> +   (set (match_operand:VSX_EXTRACT_I 0 "altivec_register_operand" "=v")
> +        (not:VSX_EXTRACT_I (match_dup 3)))]
> +  "TARGET_ALTIVEC"
> +  {
> +    operands[3] = gen_reg_rtx (GET_MODE (operands[0]));
> +  });
> +
>  (define_insn "*altivec_vcmpgts<VI_char>_p"
>    [(set (reg:CC CR6_REGNO)
>  	(unspec:CC [(gt:CC (match_operand:VI2 1 "register_operand" "v")
> diff --git a/gcc/config/rs6000/rs6000-builtins.def b/gcc/config/rs6000/rs6000-builtins.def
> index 638d0bc72ca..6b06fa8b34d 100644
> --- a/gcc/config/rs6000/rs6000-builtins.def
> +++ b/gcc/config/rs6000/rs6000-builtins.def
> @@ -641,6 +641,15 @@
>    const int __builtin_altivec_vcmpgtuw_p (int, vsi, vsi);
>      VCMPGTUW_P vector_gtu_v4si_p {pred}
>  
> +  const vsc __builtin_altivec_vcmpneb (vsc, vsc);
> +    VCMPNEB altivec_vcmpne_v16qi {}
> +
> +  const vss __builtin_altivec_vcmpneh (vss, vss);
> +    VCMPNEH altivec_vcmpne_v8hi {}
> +
> +  const vsi __builtin_altivec_vcmpnew (vsi, vsi);
> +    VCMPNEW altivec_vcmpne_v4si {}
> +
>    const vsi __builtin_altivec_vctsxs (vf, const int<5>);
>      VCTSXS altivec_vctsxs {}
>  
> @@ -2599,9 +2608,6 @@
>    const signed int __builtin_altivec_vcmpaew_p (vsi, vsi);
>      VCMPAEW_P vector_ae_v4si_p {}
>  
> -  const vsc __builtin_altivec_vcmpneb (vsc, vsc);
> -    VCMPNEB vcmpneb {}
> -
>    const signed int __builtin_altivec_vcmpneb_p (vsc, vsc);
>      VCMPNEB_P vector_ne_v16qi_p {}
>  
> @@ -2614,15 +2620,9 @@
>    const signed int __builtin_altivec_vcmpnefp_p (vf, vf);
>      VCMPNEFP_P vector_ne_v4sf_p {}
>  
> -  const vss __builtin_altivec_vcmpneh (vss, vss);
> -    VCMPNEH vcmpneh {}
> -
>    const signed int __builtin_altivec_vcmpneh_p (vss, vss);
>      VCMPNEH_P vector_ne_v8hi_p {}
>  
> -  const vsi __builtin_altivec_vcmpnew (vsi, vsi);
> -    VCMPNEW vcmpnew {}
> -
>    const signed int __builtin_altivec_vcmpnew_p (vsi, vsi);
>      VCMPNEW_P vector_ne_v4si_p {}
>  
> diff --git a/gcc/testsuite/gcc.target/powerpc/vec-cmpne-runnable.c b/gcc/testsuite/gcc.target/powerpc/vec-cmpne-runnable.c
> new file mode 100644
> index 00000000000..be038639a6c
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/powerpc/vec-cmpne-runnable.c
> @@ -0,0 +1,36 @@
> +/* { dg-do run } */
> +/* { dg-require-effective-target powerpc_altivec_ok } */

This is for running, please check for vmx_hw.

> +/* { dg-options "-mvsx -O3 " } */

Nit: s/-mvsx/-maltivec/, s/-O3/-O2/.

> +
> +/* Test that the vec_cmpne builtin works as expected.  */
> +
> +#include "vec-cmpne.h"
> +
> +define_test_functions (int, signed int, signed int, si);
> +define_test_functions (int, unsigned int, unsigned int, ui);
> +define_test_functions (short, signed short, signed short, ss);
> +define_test_functions (short, unsigned short, unsigned short, us);
> +define_test_functions (char, signed char, signed char, sc);
> +define_test_functions (char, unsigned char, unsigned char, uc);
> +define_test_functions (int, signed int, float, ff);
> +
> +define_init_verify_functions (int, signed int, signed int, si);
> +define_init_verify_functions (int, unsigned int, unsigned int, ui);
> +define_init_verify_functions (short, signed short, signed short, ss);
> +define_init_verify_functions (short, unsigned short, unsigned short, us);
> +define_init_verify_functions (char, signed char, signed char, sc);
> +define_init_verify_functions (char, unsigned char, unsigned char, uc);
> +define_init_verify_functions (int, signed int, float, ff);
> +
> +int main ()
> +{
> +  execute_test_functions (int, signed int, signed int, si);
> +  execute_test_functions (int, unsigned int, unsigned int, ui);
> +  execute_test_functions (short, signed short, signed short, ss);
> +  execute_test_functions (short, unsigned short, unsigned short, us);
> +  execute_test_functions (char, signed char, signed char, sc);
> +  execute_test_functions (char, unsigned char, unsigned char, uc);
> +  execute_test_functions (int, signed int, float, ff);
> +
> +  return 0;
> +}
> diff --git a/gcc/testsuite/gcc.target/powerpc/vec-cmpne.c b/gcc/testsuite/gcc.target/powerpc/vec-cmpne.c
> index edba9dece66..8ceddd5cc3f 100644
> --- a/gcc/testsuite/gcc.target/powerpc/vec-cmpne.c
> +++ b/gcc/testsuite/gcc.target/powerpc/vec-cmpne.c
> @@ -1,94 +1,11 @@
> -/* { dg-do run } */
> -/* { dg-require-effective-target powerpc_vsx_ok } */
> +/* { dg-do compile } */
> +/* { dg-require-effective-target powerpc_altivec_ok } */
>  /* { dg-options "-mvsx -O3" } */

Nit: s/-mvsx/-maltivec/, s/-O3/-O2/.

>  
> -/* Test that the vec_cmpne builtin works as expected.  */
> -
> -#include "altivec.h"
> -
> -#define N 4096
> -
> -void abort ();
> -
> -#define define_test_functions(VBTYPE, RTYPE, STYPE, NAME) \
> -\
> -RTYPE result_ne_##NAME[N] __attribute__((aligned(16))); \
> -RTYPE result_eq_##NAME[N] __attribute__((aligned(16))); \
> -STYPE operand1_##NAME[N] __attribute__((aligned(16))); \
> -STYPE operand2_##NAME[N] __attribute__((aligned(16))); \
> -RTYPE expected_##NAME[N] __attribute__((aligned(16))); \
> -\
> -__attribute__((noinline)) void vector_tests_##NAME () \
> -{ \
> -  vector STYPE v1_##NAME, v2_##NAME; \
> -  vector bool VBTYPE tmp_##NAME; \
> -  int i; \
> -  for (i = 0; i < N; i+=16/sizeof (STYPE)) \
> -    { \
> -      /* result_ne = operand1!=operand2.  */ \
> -      v1_##NAME = vec_vsx_ld (0, (const vector STYPE*)&operand1_##NAME[i]); \
> -      v2_##NAME = vec_vsx_ld (0, (const vector STYPE*)&operand2_##NAME[i]); \
> -\
> -      tmp_##NAME = vec_cmpeq (v1_##NAME, v2_##NAME); \
> -      vec_vsx_st (tmp_##NAME, 0, &result_eq_##NAME[i]); \
> -\
> -      tmp_##NAME = vec_cmpne (v1_##NAME, v2_##NAME); \
> -      vec_vsx_st (tmp_##NAME, 0, &result_ne_##NAME[i]); \
> -    } \
> -} \
> -\
> -__attribute__((noinline)) void init_##NAME () \
> -{ \
> -  int i; \
> -  for (i = 0; i < N; ++i) \
> -    { \
> -      result_ne_##NAME[i] = 7; \
> -      result_eq_##NAME[i] = 15; \
> -      if (i%3 == 0) \
> -	{ \
> -	  /* op1 < op2.  */ \
> -	  operand1_##NAME[i] = 1; \
> -	  operand2_##NAME[i] = 2; \
> -	} \
> -      else if (i%3 == 1) \
> -	{ \
> -	  /* op1 > op2.  */ \
> -	  operand1_##NAME[i] = 2; \
> -	  operand2_##NAME[i] = 1; \
> -	} \
> -      else if (i%3 == 2) \
> -	{ \
> -	  /* op1 == op2.  */ \
> -	  operand1_##NAME[i] = 3; \
> -	  operand2_##NAME[i] = 3; \
> -	} \
> -      /* For vector comparisons: "For each element of the result_ne, the \
> -	  value of each bit is 1 if the corresponding elements of ARG1 and \
> -	  ARG2 are equal." {or whatever the comparison is} "Otherwise, the \
> -	  value of each bit is 0."  */ \
> -    expected_##NAME[i] = -1 * (RTYPE)(operand1_##NAME[i] != operand2_##NAME[i]); \
> -  } \
> -} \
> -\
> -__attribute__((noinline)) void verify_results_##NAME () \
> -{ \
> -  int i; \
> -  for (i = 0; i < N; ++i) \
> -    { \
> -      if ( ((result_ne_##NAME[i] != expected_##NAME[i]) || \
> -	    (result_ne_##NAME[i] == result_eq_##NAME[i]))) \
> -	abort (); \
> -    } \
> -}
> -
> -
> -#define execute_test_functions(VBTYPE, RTYPE, STYPE, NAME) \
> -{ \
> -  init_##NAME (); \
> -  vector_tests_##NAME (); \
> -  verify_results_##NAME (); \
> -}
> +/* Test that the vec_cmpne builtin generates the expected Altive
> +   instructions.  */
>  
> +#include "vec-cmpne.h"
>  
>  define_test_functions (int, signed int, signed int, si);
>  define_test_functions (int, unsigned int, unsigned int, ui);
> @@ -98,17 +15,6 @@ define_test_functions (char, signed char, signed char, sc);
>  define_test_functions (char, unsigned char, unsigned char, uc);
>  define_test_functions (int, signed int, float, ff);
>  
> -int main ()
> -{
> -  execute_test_functions (int, signed int, signed int, si);
> -  execute_test_functions (int, unsigned int, unsigned int, ui);
> -  execute_test_functions (short, signed short, signed short, ss);
> -  execute_test_functions (short, unsigned short, unsigned short, us);
> -  execute_test_functions (char, signed char, signed char, sc);
> -  execute_test_functions (char, unsigned char, unsigned char, uc);
> -  execute_test_functions (int, signed int, float, ff);
> -
> -  return 0;
> -}
> -
> -
> +/* { dg-final { scan-assembler-times {\mvcmpequb\M}  4 } } */
> +/* { dg-final { scan-assembler-times {\mvcmpequh\M}  4 } } */
> +/* { dg-final { scan-assembler-times {\mvcmpequw\M}  4 } } */

Nit: There are two (signed and unsigned) for each int, short and char,
but we get four for each, it's due to the related loop is unrolled
by two, I think we can disable unrolling for this to make it robust
with something such as:

--- vec-cmpne.h.orig        2023-08-02 22:31:05.150798846 -0500
+++ vec-cmpne.h 2023-08-02 22:29:44.921109862 -0500
@@ -4,6 +4,9 @@

 void abort ();

+#define PRAGMA(X) _Pragma (#X)
+#define UNROLL0 PRAGMA (GCC unroll 0)
+
 #define define_test_functions(VBTYPE, RTYPE, STYPE, NAME) \
 \
 RTYPE result_ne_##NAME[N] __attribute__((aligned(16))); \
@@ -17,6 +20,7 @@
   vector STYPE v1_##NAME, v2_##NAME; \
   vector bool VBTYPE tmp_##NAME; \
   int i; \
+  UNROLL0 \
   for (i = 0; i < N; i+=16/sizeof (STYPE)) \
     { \
       /* result_ne = operand1!=operand2.  */ \

----------------

Then the above scan-assembler-times should be all with 2.

The other look good to me, thanks!

BR,
Kewen

> diff --git a/gcc/testsuite/gcc.target/powerpc/vec-cmpne.h b/gcc/testsuite/gcc.target/powerpc/vec-cmpne.h
> new file mode 100644
> index 00000000000..45c34d31d0e
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/powerpc/vec-cmpne.h
> @@ -0,0 +1,86 @@
> +#include "altivec.h"
> +
> +#define N 4096
> +
> +void abort ();
> +
> +#define define_test_functions(VBTYPE, RTYPE, STYPE, NAME) \
> +\
> +RTYPE result_ne_##NAME[N] __attribute__((aligned(16))); \
> +RTYPE result_eq_##NAME[N] __attribute__((aligned(16))); \
> +STYPE operand1_##NAME[N] __attribute__((aligned(16))); \
> +STYPE operand2_##NAME[N] __attribute__((aligned(16))); \
> +RTYPE expected_##NAME[N] __attribute__((aligned(16))); \
> +\
> +__attribute__((noinline)) void vector_tests_##NAME () \
> +{ \
> +  vector STYPE v1_##NAME, v2_##NAME; \
> +  vector bool VBTYPE tmp_##NAME; \
> +  int i; \
> +  for (i = 0; i < N; i+=16/sizeof (STYPE)) \
> +    { \
> +      /* result_ne = operand1!=operand2.  */ \
> +      v1_##NAME = vec_vsx_ld (0, (const vector STYPE*)&operand1_##NAME[i]); \
> +      v2_##NAME = vec_vsx_ld (0, (const vector STYPE*)&operand2_##NAME[i]); \
> +\
> +      tmp_##NAME = vec_cmpeq (v1_##NAME, v2_##NAME); \
> +      vec_vsx_st (tmp_##NAME, 0, &result_eq_##NAME[i]); \
> +\
> +      tmp_##NAME = vec_cmpne (v1_##NAME, v2_##NAME); \
> +      vec_vsx_st (tmp_##NAME, 0, &result_ne_##NAME[i]); \
> +    } \
> +} \
> +
> +#define define_init_verify_functions(VBTYPE, RTYPE, STYPE, NAME) \
> +__attribute__((noinline)) void init_##NAME () \
> +{ \
> +  int i; \
> +  for (i = 0; i < N; ++i) \
> +    { \
> +      result_ne_##NAME[i] = 7; \
> +      result_eq_##NAME[i] = 15; \
> +      if (i%3 == 0) \
> +	{ \
> +	  /* op1 < op2.  */ \
> +	  operand1_##NAME[i] = 1; \
> +	  operand2_##NAME[i] = 2; \
> +	} \
> +      else if (i%3 == 1) \
> +	{ \
> +	  /* op1 > op2.  */ \
> +	  operand1_##NAME[i] = 2; \
> +	  operand2_##NAME[i] = 1; \
> +	} \
> +      else if (i%3 == 2) \
> +	{ \
> +	  /* op1 == op2.  */ \
> +	  operand1_##NAME[i] = 3; \
> +	  operand2_##NAME[i] = 3; \
> +	} \
> +      /* For vector comparisons: "For each element of the result_ne, the \
> +	  value of each bit is 1 if the corresponding elements of ARG1 and \
> +	  ARG2 are equal." {or whatever the comparison is} "Otherwise, the \
> +	  value of each bit is 0."  */ \
> +    expected_##NAME[i] = -1 * (RTYPE)(operand1_##NAME[i] != operand2_##NAME[i]); \
> +  } \
> +} \
> +\
> +__attribute__((noinline)) void verify_results_##NAME () \
> +{ \
> +  int i; \
> +  for (i = 0; i < N; ++i) \
> +    { \
> +      if ( ((result_ne_##NAME[i] != expected_##NAME[i]) || \
> +	    (result_ne_##NAME[i] == result_eq_##NAME[i]))) \
> +	abort (); \
> +    } \
> +}
> +
> +
> +#define execute_test_functions(VBTYPE, RTYPE, STYPE, NAME) \
> +{ \
> +  init_##NAME (); \
> +  vector_tests_##NAME (); \
> +  verify_results_##NAME (); \
> +}
> +

Re: [PATCH v2] rs6000: Fix __builtin_altivec_vcmpne{b,h,w} implementation

[Carl Love]

On Mon, 2023-08-07 at 17:18 +0800, Kewen.Lin wrote:
> Hi Carl,
> 
> Sorry for the late review.
> 
> on 2023/8/2 02:29, Carl Love wrote:
> > GCC maintainers:
> > 
> > Ver 2:  Re-worked the test vec-cmpne.c to create a compile only
> > test
> > verify the instruction generation and a runnable test to verify the
> > built-in functionality.  Retested the patch on Power 8 LE/BE, Power
> > 9LE/BE and Power 10 LE with no regressions.
> > 
> > The following patch cleans up the definition for the
> > __builtin_altivec_vcmpne{b,h,w}.  The current implementation
> > implies
> > that the built-in is only supported on Power 9 since it is defined
> > under the Power 9 stanza.  However the built-in has no ISA
> > restrictions
> > as stated in the Power Vector Intrinsic Programming Reference
> > document.
> > The current built-in works because the built-in gets replaced
> > during
> > GIMPLE folding by a simple not-equal operator so it doesn't get
> > expanded and checked for Power 9 code generation.
> > 
> > This patch moves the definition to the Altivec stanza in the built-
> > in
> > definition file to make it clear the built-ins are valid for Power
> > 8,
> > Power 9 and beyond.  
> > 
> > The patch has been tested on Power 8 LE/BE, Power 9 LE/BE and Power
> > 10
> > LE with no regressions.
> > 
> > Please let me know if the patch is acceptable for
> > mainline.  Thanks.
> > 
> >                       Carl 
> > 
> > ------------------------------------------------
> > rs6000: Fix __builtin_altivec_vcmpne{b,h,w} implementation
> > 
> > The current built-in definitions for vcmpneb, vcmpneh, vcmpnew are
> > defined
> > under the Power 9 section of r66000-builtins.  This implies they
> > are only
> > supported on Power 9 and above when in fact they are defined and
> > work with
> > Altivec as well with the appropriate Altivec instruction
> > generation.
> > 
> > The vec_cmpne builtin should generate the vcmpequ{b,h,w}
> > instruction with
> > Altivec enabled and generate the vcmpne{b,h,w} on Power 9 and newer
> > processors.
> > 
> > This patch moves the definitions to the Altivec stanza to make it
> > clear
> > the built-ins are supported for all Altivec processors.  The patch
> > enables the vcmpequ{b,h,w} instruction to be generated on Altivec
> > and
> > the vcmpne{b,h,w} instruction to be generated on Power 9 and
> > beyond.
> 
> But as you noted above, the current built-ins work as expected, that
> is
> to generate with vcmpequ{b,h,w} on altivec but not Power9 while
> generate
> with vcmpne{b,h,w} on Power9.  So I think we shouldn't say it's
> enabled
> by this patch.  Instead it's to remove the confusion.

OK, changed.
> 
> > There is existing test coverage for the vec_cmpne built-in for
> > vector bool char, vector bool short, vector bool int,
> > vector bool long long in builtins-3-p9.c and p8vector-builtin-2.c.
> > Coverage for vector signed int, vector unsigned int is in
> > p8vector-builtin-2.c.
> > 
> > Test vec-cmpne.c is updated to check the generation of the
> > vcmpequ{b,h,w}
> > instructions for Altivec.  A new test vec-cmpne-runnable.c is added
> > to
> > verify the built-ins work as expected.
> > 
> > Patch has been tested on Power 8 LE/BE, Power 9 LE/BE and Power 10
> > LE
> > with no regressions.
> > 
> > gcc/ChangeLog:
> > 
> > 	* config/rs6000/rs6000-builtins.def (vcmpneb, vcmpneh,
> > vcmpnew):
> > 	Move definitions to Altivec stanza.
> > 	* config/rs6000/altivec.md (vcmpneb, vcmpneh, vcmpnew): New
> > 	define_expand.
> > 
> > gcc/testsuite/ChangeLog:
> > 
> > 	* gcc.target/powerpc/vec-cmpne-runnable.c: New execution test.
> > 	* gcc.target/powerpc/vec-cmpne.c (define_test_functions,
> > 	execute_test_functions) moved to vec-cmpne.h.  Added
> > 	scan-assembler-times for vcmpequb, vcmpequh, vcmpequw.
> > 	* gcc.target/powerpc/vec-cmpne.h: New include file for vec-
> > cmpne.c
> > 	and vec-cmpne-runnable.c. Split define_test_functions
> > definition
> > 	into define_test_functions and define_init_verify_functions.
> > ---
> >  gcc/config/rs6000/altivec.md                  |  12 ++
> >  gcc/config/rs6000/rs6000-builtins.def         |  18 +--
> >  .../gcc.target/powerpc/vec-cmpne-runnable.c   |  36 ++++++
> >  gcc/testsuite/gcc.target/powerpc/vec-cmpne.c  | 110 ++----------
> > ------
> >  gcc/testsuite/gcc.target/powerpc/vec-cmpne.h  |  86 ++++++++++++++
> >  5 files changed, 151 insertions(+), 111 deletions(-)
> >  create mode 100644 gcc/testsuite/gcc.target/powerpc/vec-cmpne-
> > runnable.c
> >  create mode 100644 gcc/testsuite/gcc.target/powerpc/vec-cmpne.h
> > 
> > diff --git a/gcc/config/rs6000/altivec.md
> > b/gcc/config/rs6000/altivec.md
> > index ad1224e0b57..31f65aa1b7a 100644
> > --- a/gcc/config/rs6000/altivec.md
> > +++ b/gcc/config/rs6000/altivec.md
> > @@ -2631,6 +2631,18 @@ (define_insn "altivec_vcmpequt_p"
> >    "vcmpequq. %0,%1,%2"
> >    [(set_attr "type" "veccmpfx")])
> >  
> > +;; Expand for builtin vcmpne{b,h,w}
> > +(define_expand "altivec_vcmpne_<mode>"
> > +  [(set (match_operand:VSX_EXTRACT_I 3 "altivec_register_operand"
> > "=v")
> > +	(eq:VSX_EXTRACT_I (match_operand:VSX_EXTRACT_I 1
> > "altivec_register_operand" "v")
> > +			  (match_operand:VSX_EXTRACT_I 2
> > "altivec_register_operand" "v")))
> > +   (set (match_operand:VSX_EXTRACT_I 0 "altivec_register_operand"
> > "=v")
> > +        (not:VSX_EXTRACT_I (match_dup 3)))]
> > +  "TARGET_ALTIVEC"
> > +  {
> > +    operands[3] = gen_reg_rtx (GET_MODE (operands[0]));
> > +  });
> > +
> >  (define_insn "*altivec_vcmpgts<VI_char>_p"
> >    [(set (reg:CC CR6_REGNO)
> >  	(unspec:CC [(gt:CC (match_operand:VI2 1 "register_operand" "v")
> > diff --git a/gcc/config/rs6000/rs6000-builtins.def
> > b/gcc/config/rs6000/rs6000-builtins.def
> > index 638d0bc72ca..6b06fa8b34d 100644
> > --- a/gcc/config/rs6000/rs6000-builtins.def
> > +++ b/gcc/config/rs6000/rs6000-builtins.def
> > @@ -641,6 +641,15 @@
> >    const int __builtin_altivec_vcmpgtuw_p (int, vsi, vsi);
> >      VCMPGTUW_P vector_gtu_v4si_p {pred}
> >  
> > +  const vsc __builtin_altivec_vcmpneb (vsc, vsc);
> > +    VCMPNEB altivec_vcmpne_v16qi {}
> > +
> > +  const vss __builtin_altivec_vcmpneh (vss, vss);
> > +    VCMPNEH altivec_vcmpne_v8hi {}
> > +
> > +  const vsi __builtin_altivec_vcmpnew (vsi, vsi);
> > +    VCMPNEW altivec_vcmpne_v4si {}
> > +
> >    const vsi __builtin_altivec_vctsxs (vf, const int<5>);
> >      VCTSXS altivec_vctsxs {}
> >  
> > @@ -2599,9 +2608,6 @@
> >    const signed int __builtin_altivec_vcmpaew_p (vsi, vsi);
> >      VCMPAEW_P vector_ae_v4si_p {}
> >  
> > -  const vsc __builtin_altivec_vcmpneb (vsc, vsc);
> > -    VCMPNEB vcmpneb {}
> > -
> >    const signed int __builtin_altivec_vcmpneb_p (vsc, vsc);
> >      VCMPNEB_P vector_ne_v16qi_p {}
> >  
> > @@ -2614,15 +2620,9 @@
> >    const signed int __builtin_altivec_vcmpnefp_p (vf, vf);
> >      VCMPNEFP_P vector_ne_v4sf_p {}
> >  
> > -  const vss __builtin_altivec_vcmpneh (vss, vss);
> > -    VCMPNEH vcmpneh {}
> > -
> >    const signed int __builtin_altivec_vcmpneh_p (vss, vss);
> >      VCMPNEH_P vector_ne_v8hi_p {}
> >  
> > -  const vsi __builtin_altivec_vcmpnew (vsi, vsi);
> > -    VCMPNEW vcmpnew {}
> > -
> >    const signed int __builtin_altivec_vcmpnew_p (vsi, vsi);
> >      VCMPNEW_P vector_ne_v4si_p {}
> >  
> > diff --git a/gcc/testsuite/gcc.target/powerpc/vec-cmpne-runnable.c
> > b/gcc/testsuite/gcc.target/powerpc/vec-cmpne-runnable.c
> > new file mode 100644
> > index 00000000000..be038639a6c
> > --- /dev/null
> > +++ b/gcc/testsuite/gcc.target/powerpc/vec-cmpne-runnable.c
> > @@ -0,0 +1,36 @@
> > +/* { dg-do run } */
> > +/* { dg-require-effective-target powerpc_altivec_ok } */
> 
> This is for running, please check for vmx_hw.
> 
> > +/* { dg-options "-mvsx -O3 " } */
> 
> Nit: s/-mvsx/-maltivec/, s/-O3/-O2/.

OK, fixed both issues.
> 
> > +
> > +/* Test that the vec_cmpne builtin works as expected.  */
> > +
> > +#include "vec-cmpne.h"
> > +
> > +define_test_functions (int, signed int, signed int, si);
> > +define_test_functions (int, unsigned int, unsigned int, ui);
> > +define_test_functions (short, signed short, signed short, ss);
> > +define_test_functions (short, unsigned short, unsigned short, us);
> > +define_test_functions (char, signed char, signed char, sc);
> > +define_test_functions (char, unsigned char, unsigned char, uc);
> > +define_test_functions (int, signed int, float, ff);
> > +
> > +define_init_verify_functions (int, signed int, signed int, si);
> > +define_init_verify_functions (int, unsigned int, unsigned int,
> > ui);
> > +define_init_verify_functions (short, signed short, signed short,
> > ss);
> > +define_init_verify_functions (short, unsigned short, unsigned
> > short, us);
> > +define_init_verify_functions (char, signed char, signed char, sc);
> > +define_init_verify_functions (char, unsigned char, unsigned char,
> > uc);
> > +define_init_verify_functions (int, signed int, float, ff);
> > +
> > +int main ()
> > +{
> > +  execute_test_functions (int, signed int, signed int, si);
> > +  execute_test_functions (int, unsigned int, unsigned int, ui);
> > +  execute_test_functions (short, signed short, signed short, ss);
> > +  execute_test_functions (short, unsigned short, unsigned short,
> > us);
> > +  execute_test_functions (char, signed char, signed char, sc);
> > +  execute_test_functions (char, unsigned char, unsigned char, uc);
> > +  execute_test_functions (int, signed int, float, ff);
> > +
> > +  return 0;
> > +}
> > diff --git a/gcc/testsuite/gcc.target/powerpc/vec-cmpne.c
> > b/gcc/testsuite/gcc.target/powerpc/vec-cmpne.c
> > index edba9dece66..8ceddd5cc3f 100644
> > --- a/gcc/testsuite/gcc.target/powerpc/vec-cmpne.c
> > +++ b/gcc/testsuite/gcc.target/powerpc/vec-cmpne.c
> > @@ -1,94 +1,11 @@
> > -/* { dg-do run } */
> > -/* { dg-require-effective-target powerpc_vsx_ok } */
> > +/* { dg-do compile } */
> > +/* { dg-require-effective-target powerpc_altivec_ok } */
> >  /* { dg-options "-mvsx -O3" } */
> 
> Nit: s/-mvsx/-maltivec/, s/-O3/-O2/.

Fixed.
> 
> >  
> > -/* Test that the vec_cmpne builtin works as expected.  */
> > -
> > -#include "altivec.h"
> > -
> > -#define N 4096
> > -
> > -void abort ();
> > -
> > -#define define_test_functions(VBTYPE, RTYPE, STYPE, NAME) \
> > -\
> > -RTYPE result_ne_##NAME[N] __attribute__((aligned(16))); \
> > -RTYPE result_eq_##NAME[N] __attribute__((aligned(16))); \
> > -STYPE operand1_##NAME[N] __attribute__((aligned(16))); \
> > -STYPE operand2_##NAME[N] __attribute__((aligned(16))); \
> > -RTYPE expected_##NAME[N] __attribute__((aligned(16))); \
> > -\
> > -__attribute__((noinline)) void vector_tests_##NAME () \
> > -{ \
> > -  vector STYPE v1_##NAME, v2_##NAME; \
> > -  vector bool VBTYPE tmp_##NAME; \
> > -  int i; \
> > -  for (i = 0; i < N; i+=16/sizeof (STYPE)) \
> > -    { \
> > -      /* result_ne = operand1!=operand2.  */ \
> > -      v1_##NAME = vec_vsx_ld (0, (const vector
> > STYPE*)&operand1_##NAME[i]); \
> > -      v2_##NAME = vec_vsx_ld (0, (const vector
> > STYPE*)&operand2_##NAME[i]); \
> > -\
> > -      tmp_##NAME = vec_cmpeq (v1_##NAME, v2_##NAME); \
> > -      vec_vsx_st (tmp_##NAME, 0, &result_eq_##NAME[i]); \
> > -\
> > -      tmp_##NAME = vec_cmpne (v1_##NAME, v2_##NAME); \
> > -      vec_vsx_st (tmp_##NAME, 0, &result_ne_##NAME[i]); \
> > -    } \
> > -} \
> > -\
> > -__attribute__((noinline)) void init_##NAME () \
> > -{ \
> > -  int i; \
> > -  for (i = 0; i < N; ++i) \
> > -    { \
> > -      result_ne_##NAME[i] = 7; \
> > -      result_eq_##NAME[i] = 15; \
> > -      if (i%3 == 0) \
> > -	{ \
> > -	  /* op1 < op2.  */ \
> > -	  operand1_##NAME[i] = 1; \
> > -	  operand2_##NAME[i] = 2; \
> > -	} \
> > -      else if (i%3 == 1) \
> > -	{ \
> > -	  /* op1 > op2.  */ \
> > -	  operand1_##NAME[i] = 2; \
> > -	  operand2_##NAME[i] = 1; \
> > -	} \
> > -      else if (i%3 == 2) \
> > -	{ \
> > -	  /* op1 == op2.  */ \
> > -	  operand1_##NAME[i] = 3; \
> > -	  operand2_##NAME[i] = 3; \
> > -	} \
> > -      /* For vector comparisons: "For each element of the
> > result_ne, the \
> > -	  value of each bit is 1 if the corresponding elements of ARG1
> > and \
> > -	  ARG2 are equal." {or whatever the comparison is} "Otherwise,
> > the \
> > -	  value of each bit is 0."  */ \
> > -    expected_##NAME[i] = -1 * (RTYPE)(operand1_##NAME[i] !=
> > operand2_##NAME[i]); \
> > -  } \
> > -} \
> > -\
> > -__attribute__((noinline)) void verify_results_##NAME () \
> > -{ \
> > -  int i; \
> > -  for (i = 0; i < N; ++i) \
> > -    { \
> > -      if ( ((result_ne_##NAME[i] != expected_##NAME[i]) || \
> > -	    (result_ne_##NAME[i] == result_eq_##NAME[i]))) \
> > -	abort (); \
> > -    } \
> > -}
> > -
> > -
> > -#define execute_test_functions(VBTYPE, RTYPE, STYPE, NAME) \
> > -{ \
> > -  init_##NAME (); \
> > -  vector_tests_##NAME (); \
> > -  verify_results_##NAME (); \
> > -}
> > +/* Test that the vec_cmpne builtin generates the expected Altive
> > +   instructions.  */
> >  
> > +#include "vec-cmpne.h"
> >  
> >  define_test_functions (int, signed int, signed int, si);
> >  define_test_functions (int, unsigned int, unsigned int, ui);
> > @@ -98,17 +15,6 @@ define_test_functions (char, signed char, signed
> > char, sc);
> >  define_test_functions (char, unsigned char, unsigned char, uc);
> >  define_test_functions (int, signed int, float, ff);
> >  
> > -int main ()
> > -{
> > -  execute_test_functions (int, signed int, signed int, si);
> > -  execute_test_functions (int, unsigned int, unsigned int, ui);
> > -  execute_test_functions (short, signed short, signed short, ss);
> > -  execute_test_functions (short, unsigned short, unsigned short,
> > us);
> > -  execute_test_functions (char, signed char, signed char, sc);
> > -  execute_test_functions (char, unsigned char, unsigned char, uc);
> > -  execute_test_functions (int, signed int, float, ff);
> > -
> > -  return 0;
> > -}
> > -
> > -
> > +/* { dg-final { scan-assembler-times {\mvcmpequb\M}  4 } } */
> > +/* { dg-final { scan-assembler-times {\mvcmpequh\M}  4 } } */
> > +/* { dg-final { scan-assembler-times {\mvcmpequw\M}  4 } } */
> 
> Nit: There are two (signed and unsigned) for each int, short and
> char,
> but we get four for each, it's due to the related loop is unrolled
> by two, I think we can disable unrolling for this to make it robust
> with something such as:
> 
> --- vec-cmpne.h.orig        2023-08-02 22:31:05.150798846 -0500
> +++ vec-cmpne.h 2023-08-02 22:29:44.921109862 -0500
> @@ -4,6 +4,9 @@
> 
>  void abort ();
> 
> +#define PRAGMA(X) _Pragma (#X)
> +#define UNROLL0 PRAGMA (GCC unroll 0)
> +
>  #define define_test_functions(VBTYPE, RTYPE, STYPE, NAME) \
>  \
>  RTYPE result_ne_##NAME[N] __attribute__((aligned(16))); \
> @@ -17,6 +20,7 @@
>    vector STYPE v1_##NAME, v2_##NAME; \
>    vector bool VBTYPE tmp_##NAME; \
>    int i; \
> +  UNROLL0 \
>    for (i = 0; i < N; i+=16/sizeof (STYPE)) \
>      { \
>        /* result_ne = operand1!=operand2.  */ \
> 
> ----------------
> 
> Then the above scan-assembler-times should be all with 2.

Added the no unroll, updated the expected counts.

                  Carl