From: Pat Haugen <pthaugen@linux.ibm.com>
To: GCC Patches <gcc-patches@gcc.gnu.org>,
Segher Boessenkool <segher@kernel.crashing.org>,
Peter Bergner <bergner@linux.ibm.com>,
David Edelsohn <dje.gcc@gmail.com>,
"Kewen.Lin" <linkw@linux.ibm.com>
Subject: [PATCH V2, rs6000] Disable generation of scalar modulo instructions
Date: Tue, 18 Apr 2023 07:22:18 -0500 [thread overview]
Message-ID: <36819cc8-c948-1426-2429-7fe4f6b67c94@linux.ibm.com> (raw)
Updated from prior patch to also disable for int128.
Disable generation of scalar modulo instructions.
It was recently discovered that the scalar modulo instructions can suffer
noticeable performance issues for certain input values. This patch disables
their generation since the equivalent div/mul/sub sequence does not suffer
the same problem.
Bootstrapped and regression tested on powerpc64/powerpc64le.
Ok for master and backports after burn in?
-Pat
2023-04-18 Pat Haugen <pthaugen@linux.ibm.com>
gcc/
* config/rs6000/rs6000.h (RS6000_DISABLE_SCALAR_MODULO): New.
* config/rs6000/rs6000.md (mod<mode>3, *mod<mode>3): Disable.
(define_expand umod<mode>3): New.
(define_insn umod<mode>3): Rename to *umod<mode>3 and disable.
(umodti3, modti3): Disable.
gcc/testsuite/
* gcc.target/powerpc/clone1.c: Add xfails.
* gcc.target/powerpc/clone3.c: Likewise.
* gcc.target/powerpc/mod-1.c: Likewise.
* gcc.target/powerpc/mod-2.c: Likewise.
* gcc.target/powerpc/p10-vdivq-vmodq.c: Likewise.
diff --git a/gcc/config/rs6000/rs6000.h b/gcc/config/rs6000/rs6000.h
index 3503614efbd..1cf0a0013c0 100644
--- a/gcc/config/rs6000/rs6000.h
+++ b/gcc/config/rs6000/rs6000.h
@@ -2492,3 +2492,9 @@ while (0)
rs6000_asm_output_opcode (STREAM); \
} \
while (0)
+
+/* Disable generation of scalar modulo instructions due to performance
issues
+ with certain input values. This can be removed in the future when the
+ issues have been resolved. */
+#define RS6000_DISABLE_SCALAR_MODULO 1
+
diff --git a/gcc/config/rs6000/rs6000.md b/gcc/config/rs6000/rs6000.md
index 44f7dd509cb..4f397bc9179 100644
--- a/gcc/config/rs6000/rs6000.md
+++ b/gcc/config/rs6000/rs6000.md
@@ -3421,6 +3421,17 @@ (define_expand "mod<mode>3"
FAIL;
operands[2] = force_reg (<MODE>mode, operands[2]);
+
+ if (RS6000_DISABLE_SCALAR_MODULO)
+ {
+ temp1 = gen_reg_rtx (<MODE>mode);
+ temp2 = gen_reg_rtx (<MODE>mode);
+
+ emit_insn (gen_div<mode>3 (temp1, operands[1], operands[2]));
+ emit_insn (gen_mul<mode>3 (temp2, temp1, operands[2]));
+ emit_insn (gen_sub<mode>3 (operands[0], operands[1], temp2));
+ DONE;
+ }
}
else
{
@@ -3440,17 +3451,42 @@ (define_insn "*mod<mode>3"
[(set (match_operand:GPR 0 "gpc_reg_operand" "=&r,r")
(mod:GPR (match_operand:GPR 1 "gpc_reg_operand" "r,r")
(match_operand:GPR 2 "gpc_reg_operand" "r,r")))]
- "TARGET_MODULO"
+ "TARGET_MODULO && !RS6000_DISABLE_SCALAR_MODULO"
"mods<wd> %0,%1,%2"
[(set_attr "type" "div")
(set_attr "size" "<bits>")])
+;; This define_expand can be removed when RS6000_DISABLE_SCALAR_MODULO is
+;; removed.
+(define_expand "umod<mode>3"
+ [(set (match_operand:GPR 0 "gpc_reg_operand")
+ (umod:GPR (match_operand:GPR 1 "gpc_reg_operand")
+ (match_operand:GPR 2 "gpc_reg_operand")))]
+ ""
+{
+ rtx temp1;
+ rtx temp2;
+
+ if (!TARGET_MODULO)
+ FAIL;
-(define_insn "umod<mode>3"
+ if (RS6000_DISABLE_SCALAR_MODULO)
+ {
+ temp1 = gen_reg_rtx (<MODE>mode);
+ temp2 = gen_reg_rtx (<MODE>mode);
+
+ emit_insn (gen_udiv<mode>3 (temp1, operands[1], operands[2]));
+ emit_insn (gen_mul<mode>3 (temp2, temp1, operands[2]));
+ emit_insn (gen_sub<mode>3 (operands[0], operands[1], temp2));
+ DONE;
+ }
+})
+
+(define_insn "*umod<mode>3"
[(set (match_operand:GPR 0 "gpc_reg_operand" "=&r,r")
(umod:GPR (match_operand:GPR 1 "gpc_reg_operand" "r,r")
(match_operand:GPR 2 "gpc_reg_operand" "r,r")))]
- "TARGET_MODULO"
+ "TARGET_MODULO && !RS6000_DISABLE_SCALAR_MODULO"
"modu<wd> %0,%1,%2"
[(set_attr "type" "div")
(set_attr "size" "<bits>")])
@@ -3507,7 +3543,7 @@ (define_insn "umodti3"
[(set (match_operand:TI 0 "altivec_register_operand" "=v")
(umod:TI (match_operand:TI 1 "altivec_register_operand" "v")
(match_operand:TI 2 "altivec_register_operand" "v")))]
- "TARGET_POWER10 && TARGET_POWERPC64"
+ "TARGET_POWER10 && TARGET_POWERPC64 && !RS6000_DISABLE_SCALAR_MODULO"
"vmoduq %0,%1,%2"
[(set_attr "type" "vecdiv")
(set_attr "size" "128")])
@@ -3516,7 +3552,7 @@ (define_insn "modti3"
[(set (match_operand:TI 0 "altivec_register_operand" "=v")
(mod:TI (match_operand:TI 1 "altivec_register_operand" "v")
(match_operand:TI 2 "altivec_register_operand" "v")))]
- "TARGET_POWER10 && TARGET_POWERPC64"
+ "TARGET_POWER10 && TARGET_POWERPC64 && !RS6000_DISABLE_SCALAR_MODULO"
"vmodsq %0,%1,%2"
[(set_attr "type" "vecdiv")
(set_attr "size" "128")])
diff --git a/gcc/testsuite/gcc.target/powerpc/clone1.c
b/gcc/testsuite/gcc.target/powerpc/clone1.c
index c69fd2aa1b8..74323ca0e8c 100644
--- a/gcc/testsuite/gcc.target/powerpc/clone1.c
+++ b/gcc/testsuite/gcc.target/powerpc/clone1.c
@@ -21,6 +21,7 @@ long mod_func_or (long a, long b, long c)
return mod_func (a, b) | c;
}
-/* { dg-final { scan-assembler-times {\mdivd\M} 1 } } */
-/* { dg-final { scan-assembler-times {\mmulld\M} 1 } } */
-/* { dg-final { scan-assembler-times {\mmodsd\M} 1 } } */
+/* { Fail due to RS6000_DISABLE_SCALAR_MODULO. */
+/* { dg-final { scan-assembler-times {\mdivd\M} 1 { xfail *-*-* } } } */
+/* { dg-final { scan-assembler-times {\mmulld\M} 1 { xfail *-*-* } } } */
+/* { dg-final { scan-assembler-times {\mmodsd\M} 1 { xfail *-*-* } } } */
diff --git a/gcc/testsuite/gcc.target/powerpc/clone3.c
b/gcc/testsuite/gcc.target/powerpc/clone3.c
index 911b88b781d..d3eb4dd2378 100644
--- a/gcc/testsuite/gcc.target/powerpc/clone3.c
+++ b/gcc/testsuite/gcc.target/powerpc/clone3.c
@@ -27,7 +27,8 @@ long mod_func_or (long a, long b, long c)
return mod_func (a, b) | c;
}
-/* { dg-final { scan-assembler-times {\mdivd\M} 1 } } */
-/* { dg-final { scan-assembler-times {\mmulld\M} 1 } } */
-/* { dg-final { scan-assembler-times {\mmodsd\M} 2 } } */
+/* { Fail due to RS6000_DISABLE_SCALAR_MODULO. */
+/* { dg-final { scan-assembler-times {\mdivd\M} 1 { xfail *-*-* } } } */
+/* { dg-final { scan-assembler-times {\mmulld\M} 1 { xfail *-*-* } } } */
+/* { dg-final { scan-assembler-times {\mmodsd\M} 2 { xfail *-*-* } } } */
/* { dg-final { scan-assembler-times {\mpld\M} 1 } } */
diff --git a/gcc/testsuite/gcc.target/powerpc/mod-1.c
b/gcc/testsuite/gcc.target/powerpc/mod-1.c
index 861ba670af4..74af98f5bc3 100644
--- a/gcc/testsuite/gcc.target/powerpc/mod-1.c
+++ b/gcc/testsuite/gcc.target/powerpc/mod-1.c
@@ -7,13 +7,14 @@ long lsmod (long a, long b) { return a%b; }
unsigned int iumod (unsigned int a, unsigned int b) { return a%b; }
unsigned long lumod (unsigned long a, unsigned long b) { return a%b; }
-/* { dg-final { scan-assembler-times "modsw " 1 } } */
-/* { dg-final { scan-assembler-times "modsd " 1 } } */
-/* { dg-final { scan-assembler-times "moduw " 1 } } */
-/* { dg-final { scan-assembler-times "modud " 1 } } */
-/* { dg-final { scan-assembler-not "mullw " } } */
-/* { dg-final { scan-assembler-not "mulld " } } */
-/* { dg-final { scan-assembler-not "divw " } } */
-/* { dg-final { scan-assembler-not "divd " } } */
-/* { dg-final { scan-assembler-not "divwu " } } */
-/* { dg-final { scan-assembler-not "divdu " } } */
+/* { Fail due to RS6000_DISABLE_SCALAR_MODULO. */
+/* { dg-final { scan-assembler-times "modsw " 1 { xfail *-*-* } } } */
+/* { dg-final { scan-assembler-times "modsd " 1 { xfail *-*-* } } } */
+/* { dg-final { scan-assembler-times "moduw " 1 { xfail *-*-* } } } */
+/* { dg-final { scan-assembler-times "modud " 1 { xfail *-*-* } } } */
+/* { dg-final { scan-assembler-not "mullw " { xfail *-*-* } } } */
+/* { dg-final { scan-assembler-not "mulld " { xfail *-*-* } } } */
+/* { dg-final { scan-assembler-not "divw " { xfail *-*-* } } } */
+/* { dg-final { scan-assembler-not "divd " { xfail *-*-* } } } */
+/* { dg-final { scan-assembler-not "divwu " { xfail *-*-* } } } */
+/* { dg-final { scan-assembler-not "divdu " { xfail *-*-* } } } */
diff --git a/gcc/testsuite/gcc.target/powerpc/mod-2.c
b/gcc/testsuite/gcc.target/powerpc/mod-2.c
index 441ec5878f1..896e2e35260 100644
--- a/gcc/testsuite/gcc.target/powerpc/mod-2.c
+++ b/gcc/testsuite/gcc.target/powerpc/mod-2.c
@@ -5,8 +5,9 @@
int ismod (int a, int b) { return a%b; }
unsigned int iumod (unsigned int a, unsigned int b) { return a%b; }
-/* { dg-final { scan-assembler-times "modsw " 1 } } */
-/* { dg-final { scan-assembler-times "moduw " 1 } } */
-/* { dg-final { scan-assembler-not "mullw " } } */
-/* { dg-final { scan-assembler-not "divw " } } */
-/* { dg-final { scan-assembler-not "divwu " } } */
+/* { Fail due to RS6000_DISABLE_SCALAR_MODULO. */
+/* { dg-final { scan-assembler-times "modsw " 1 { xfail *-*-* } } } */
+/* { dg-final { scan-assembler-times "moduw " 1 { xfail *-*-* } } } */
+/* { dg-final { scan-assembler-not "mullw " { xfail *-*-* } } } */
+/* { dg-final { scan-assembler-not "divw " { xfail *-*-* } } } */
+/* { dg-final { scan-assembler-not "divwu " { xfail *-*-* } } } */
diff --git a/gcc/testsuite/gcc.target/powerpc/p10-vdivq-vmodq.c
b/gcc/testsuite/gcc.target/powerpc/p10-vdivq-vmodq.c
index 84685e5ff43..148998c8c9d 100644
--- a/gcc/testsuite/gcc.target/powerpc/p10-vdivq-vmodq.c
+++ b/gcc/testsuite/gcc.target/powerpc/p10-vdivq-vmodq.c
@@ -23,5 +23,6 @@ __int128 s_mod(__int128 a, __int128 b)
/* { dg-final { scan-assembler {\mvdivsq\M} } } */
/* { dg-final { scan-assembler {\mvdivuq\M} } } */
-/* { dg-final { scan-assembler {\mvmodsq\M} } } */
-/* { dg-final { scan-assembler {\mvmoduq\M} } } */
+/* { Fail due to RS6000_DISABLE_SCALAR_MODULO. */
+/* { dg-final { scan-assembler {\mvmodsq\M} { xfail *-*-* } } } */
+/* { dg-final { scan-assembler {\mvmoduq\M} { xfail *-*-* } } } */
next reply other threads:[~2023-04-18 12:22 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-18 12:22 Pat Haugen [this message]
2023-05-04 20:25 ` Pat Haugen
2023-05-18 17:57 ` Pat Haugen
2023-06-02 15:13 ` Pat Haugen
2023-06-05 6:10 ` Kewen.Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=36819cc8-c948-1426-2429-7fe4f6b67c94@linux.ibm.com \
--to=pthaugen@linux.ibm.com \
--cc=bergner@linux.ibm.com \
--cc=dje.gcc@gmail.com \
--cc=gcc-patches@gcc.gnu.org \
--cc=linkw@linux.ibm.com \
--cc=segher@kernel.crashing.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).