From: Philipp Tomsich <philipp.tomsich@vrull.eu>
To: Kyrylo Tkachov <Kyrylo.Tkachov@arm.com>
Cc: "gcc-patches@gcc.gnu.org" <gcc-patches@gcc.gnu.org>,
Di Zhao <di.zhao@amperecomputing.com>
Subject: Re: [PATCH v2] aarch64: disable LDP via tuning structure for -mcpu=ampere1/1a
Date: Mon, 17 Apr 2023 12:20:15 +0200 [thread overview]
Message-ID: <CAAeLtUArWKu1RNBRZ=FMZR9oE1jV6W1AABrsGvB2NUNjKY+mvw@mail.gmail.com> (raw)
In-Reply-To: <PAXPR08MB692625DCE62E445184E99259939C9@PAXPR08MB6926.eurprd08.prod.outlook.com>
[-- Attachment #1: Type: text/plain, Size: 6199 bytes --]
Applied to master, thanks!
Philipp.
On Mon, 17 Apr 2023 at 11:56, Kyrylo Tkachov <Kyrylo.Tkachov@arm.com> wrote:
>
>
> > -----Original Message-----
> > From: Philipp Tomsich <philipp.tomsich@vrull.eu>
> > Sent: Friday, April 14, 2023 7:06 PM
> > To: gcc-patches@gcc.gnu.org
> > Cc: Kyrylo Tkachov <Kyrylo.Tkachov@arm.com>; Philipp Tomsich
> > <philipp.tomsich@vrull.eu>; Di Zhao <di.zhao@amperecomputing.com>
> > Subject: [PATCH v2] aarch64: disable LDP via tuning structure for -
> > mcpu=ampere1/1a
> >
> > AmpereOne (-mcpu=ampere1) breaks LDP instructions into two uops.
> > Given the chance that this causes instructions to slip into the next
> > decoding cycle and the additional overheads when handling
> > cacheline-crossing LDP instructions, we disable the generation of LDP
> > isntructions through the tuning structure from instruction combining
> > (such as in peephole2).
> >
> > Given the code-density benefits in builtins and prologue/epilogue
> > expansion, we allow LDPs there.
> >
> > This commit:
> > * adds a new tuning option AARCH64_EXTRA_TUNE_NO_LDP_COMBINE
> > * allows -moverride=tune=... to override this
> >
> > These changes are benchmark-driven, yielding the following changes
> > (with a net-overall improvement):
> > 503.bwaves_r. -0.88%
> > 507.cactuBSSN_r 0.35%
> > 508.namd_r 3.09%
> > 510.parest_r -2.99%
> > 511.povray_r 5.54%
> > 519.lbm_r 15.83%
> > 521.wrf_r 0.56%
> > 526.blender_r 2.47%
> > 527.cam4_r 0.70%
> > 538.imagick_r 0.00%
> > 544.nab_r -0.33%
> > 549.fotonik3d_r. -0.42%
> > 554.roms_r 0.00%
> > -------------------------
> > = total 1.79%
> >
> > Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
> > Co-Authored-By: Di Zhao <di.zhao@amperecomputing.com>
>
> Ok.
> Thanks,
> Kyrill
>
> >
> > gcc/ChangeLog:
> >
> > * config/aarch64/aarch64-tuning-flags.def
> > (AARCH64_EXTRA_TUNING_OPTION):
> > Add AARCH64_EXTRA_TUNE_NO_LDP_COMBINE.
> > * config/aarch64/aarch64.cc (aarch64_operands_ok_for_ldpstp):
> > Check for the above tuning option when processing loads.
> >
> > gcc/testsuite/ChangeLog:
> >
> > * gcc.target/aarch64/ampere1-no_ldp_combine.c: New test.
> >
> > ---
> >
> > Changes in v2:
> > - apply both to -mcpu=ampere1 and -mcpu=ampere1a
> > - add TODO: tag, per discussions on the mailing list
> > - add testcase
> >
> > gcc/config/aarch64/aarch64-tuning-flags.def | 3 +++
> > gcc/config/aarch64/aarch64.cc | 18 ++++++++++++++++--
> > .../aarch64/ampere1-no_ldp_combine.c | 11 +++++++++++
> > 3 files changed, 30 insertions(+), 2 deletions(-)
> > create mode 100644 gcc/testsuite/gcc.target/aarch64/ampere1-
> > no_ldp_combine.c
> >
> > diff --git a/gcc/config/aarch64/aarch64-tuning-flags.def
> > b/gcc/config/aarch64/aarch64-tuning-flags.def
> > index 712895a5263..52112ba7c48 100644
> > --- a/gcc/config/aarch64/aarch64-tuning-flags.def
> > +++ b/gcc/config/aarch64/aarch64-tuning-flags.def
> > @@ -44,6 +44,9 @@ AARCH64_EXTRA_TUNING_OPTION
> > ("cheap_shift_extend", CHEAP_SHIFT_EXTEND)
> > /* Disallow load/store pair instructions on Q-registers. */
> > AARCH64_EXTRA_TUNING_OPTION ("no_ldp_stp_qregs",
> > NO_LDP_STP_QREGS)
> >
> > +/* Disallow load-pair instructions to be formed in combine/peephole. */
> > +AARCH64_EXTRA_TUNING_OPTION ("no_ldp_combine",
> > NO_LDP_COMBINE)
> > +
> > AARCH64_EXTRA_TUNING_OPTION ("rename_load_regs",
> > RENAME_LOAD_REGS)
> >
> > AARCH64_EXTRA_TUNING_OPTION ("cse_sve_vl_constants",
> > CSE_SVE_VL_CONSTANTS)
> > diff --git a/gcc/config/aarch64/aarch64.cc
> b/gcc/config/aarch64/aarch64.cc
> > index f4ef22ce02f..0f04ab9fba0 100644
> > --- a/gcc/config/aarch64/aarch64.cc
> > +++ b/gcc/config/aarch64/aarch64.cc
> > @@ -1933,7 +1933,7 @@ static const struct tune_params ampere1_tunings =
> > 2, /* min_div_recip_mul_df. */
> > 0, /* max_case_values. */
> > tune_params::AUTOPREFETCHER_WEAK, /* autoprefetcher_model. */
> > - (AARCH64_EXTRA_TUNE_NONE), /* tune_flags. */
> > + (AARCH64_EXTRA_TUNE_NO_LDP_COMBINE), /* tune_flags. */
> > &ere1_prefetch_tune
> > };
> >
> > @@ -1971,7 +1971,7 @@ static const struct tune_params ampere1a_tunings
> > =
> > 2, /* min_div_recip_mul_df. */
> > 0, /* max_case_values. */
> > tune_params::AUTOPREFETCHER_WEAK, /* autoprefetcher_model. */
> > - (AARCH64_EXTRA_TUNE_NONE), /* tune_flags. */
> > + (AARCH64_EXTRA_TUNE_NO_LDP_COMBINE), /* tune_flags. */
> > &ere1_prefetch_tune
> > };
> >
> > @@ -26053,6 +26053,20 @@ aarch64_operands_ok_for_ldpstp (rtx
> > *operands, bool load,
> > enum reg_class rclass_1, rclass_2;
> > rtx mem_1, mem_2, reg_1, reg_2;
> >
> > + /* Allow the tuning structure to disable LDP instruction formation
> > + from combining instructions (e.g., in peephole2).
> > + TODO: Implement fine-grained tuning control for LDP and STP:
> > + 1. control policies for load and store separately;
> > + 2. support the following policies:
> > + - default (use what is in the tuning structure)
> > + - always
> > + - never
> > + - aligned (only if the compiler can prove that the
> > + load will be aligned to 2 * element_size) */
> > + if (load && (aarch64_tune_params.extra_tuning_flags
> > + & AARCH64_EXTRA_TUNE_NO_LDP_COMBINE))
> > + return false;
> > +
> > if (load)
> > {
> > mem_1 = operands[1];
> > diff --git a/gcc/testsuite/gcc.target/aarch64/ampere1-no_ldp_combine.c
> > b/gcc/testsuite/gcc.target/aarch64/ampere1-no_ldp_combine.c
> > new file mode 100644
> > index 00000000000..bc871f4481d
> > --- /dev/null
> > +++ b/gcc/testsuite/gcc.target/aarch64/ampere1-no_ldp_combine.c
> > @@ -0,0 +1,11 @@
> > +/* { dg-options "-O3 -mtune=ampere1" } */
> > +
> > +long
> > +foo (long a[])
> > +{
> > + return a[0] + a[1];
> > +}
> > +
> > +/* We should see two ldrs instead of one ldp. */
> > +/* { dg-final { scan-assembler {\tldr\t} } } */
> > +/* { dg-final { scan-assembler-not {\tldp\t} } } */
> > --
> > 2.34.1
>
>
next prev parent reply other threads:[~2023-04-17 10:20 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-04-14 18:05 Philipp Tomsich
2023-04-17 9:56 ` Kyrylo Tkachov
2023-04-17 10:20 ` Philipp Tomsich [this message]
2023-04-17 10:22 ` Philipp Tomsich
2023-04-17 15:06 ` Kyrylo Tkachov
2023-04-17 15:49 ` Philipp Tomsich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAAeLtUArWKu1RNBRZ=FMZR9oE1jV6W1AABrsGvB2NUNjKY+mvw@mail.gmail.com' \
--to=philipp.tomsich@vrull.eu \
--cc=Kyrylo.Tkachov@arm.com \
--cc=di.zhao@amperecomputing.com \
--cc=gcc-patches@gcc.gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).