public inbox for gcc-patches@gcc.gnu.org
 help / color / mirror / Atom feed
* [PATCH] Simplify vec_unpack of uniform_vector_p constructors in match.pd.
@ 2022-05-21 15:31 Roger Sayle
  2022-05-23 10:49 ` Richard Biener
  0 siblings, 1 reply; 4+ messages in thread
From: Roger Sayle @ 2022-05-21 15:31 UTC (permalink / raw)
  To: gcc-patches

[-- Attachment #1: Type: text/plain, Size: 1157 bytes --]


This patch simplifies vec_unpack_hi_expr/vec_unpack_lo_expr of a uniform
constructor or vec_duplicate operand.  The motivation is from PR 105621
where after optimization, we're left with:

  vect_cst__21 = {c_8(D), c_8(D), c_8(D), c_8(D)};
  vect_iftmp.7_4 = [vec_unpack_hi_expr] vect_cst__21;

It turns out that there are no constant folding/simplification patterns
in match.pd, but the above can be simplified further to the equivalent:

  _20 = (long int) c_8(D);
  vect_iftmp.7_4 = [vec_duplicate_expr] _20;

which on x86-64 results in one less instruction, replacing pshufd $0
then punpackhq, with punpcklqdq.  This transformation is also useful
for helping CSE to spot that unpack_hi and unpack_lo are equivalent.

This patch has been tested on x86_64-pc-linux-gnu with make bootstrap
and make -k check with no new failures.  Ok for mainline?


2022-05-21  Roger Sayle  <roger@nextmovesoftware.com>

gcc/ChangeLog
        * match.pd (simplify vec_unpack_hi): Simplify VEC_UNPACK_*_EXPR
        of uniform vector constructors and vec_duplicate.

gcc/testsuite/ChangeLog
        * g++.dg/vect/pr105621.cc: New test case.


Thanks in advance,
Roger
--


[-- Attachment #2: patchfb3.txt --]
[-- Type: text/plain, Size: 1609 bytes --]

diff --git a/gcc/match.pd b/gcc/match.pd
index c2fed9b..753c392 100644
--- a/gcc/match.pd
+++ b/gcc/match.pd
@@ -7800,6 +7800,22 @@ and,
  (if (TREE_CODE (@0) == SSA_NAME && num_imm_uses (@0) == 2)
   (minus (mult (vec_perm @1 @1 @3) @2) @4)))
 
+/* VEC_UNPACK_LO_EXPR and friends.  */
+(for unpack (vec_unpack_lo vec_unpack_float_lo vec_unpack_fix_trunc_lo
+	     vec_unpack_hi vec_unpack_float_hi vec_unpack_fix_trunc_hi)
+     opcode (convert float fix_trunc convert float fix_trunc)
+ (simplify
+  (unpack CONSTRUCTOR@0)
+  (with { tree ctor = (TREE_CODE (@0) == SSA_NAME
+		    ? gimple_assign_rhs1 (SSA_NAME_DEF_STMT (@0)) : @0);
+	  tree elt = uniform_vector_p (ctor);
+	  tree eltype = TREE_TYPE (type); }
+   (if (elt)
+    (vec_duplicate (opcode:eltype { elt; })))))
+ (simplify
+  (unpack (vec_duplicate @0))
+  (with { tree eltype = TREE_TYPE (type); }
+   (vec_duplicate (opcode:eltype @0)))))
 
 /* Match count trailing zeroes for simplify_count_trailing_zeroes in fwprop.
    The canonical form is array[((x & -x) * C) >> SHIFT] where C is a magic
diff --git a/gcc/testsuite/g++.dg/vect/pr105621.cc b/gcc/testsuite/g++.dg/vect/pr105621.cc
new file mode 100644
index 0000000..98e8fcd
--- /dev/null
+++ b/gcc/testsuite/g++.dg/vect/pr105621.cc
@@ -0,0 +1,11 @@
+/* { dg-do compile } */
+/* { dg-options "-O2 -fdump-tree-optimized" } */
+
+bool d;
+
+void test(unsigned short a, int b, unsigned c) {
+  for (int i = 2; i < 24; i += 3)
+    d = b ? a ? c : 2086607777901731118 : 0;
+}
+
+/* { dg-final { scan-tree-dump-not "vec_unpack" "optimized" } } */

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH] Simplify vec_unpack of uniform_vector_p constructors in match.pd.
  2022-05-21 15:31 [PATCH] Simplify vec_unpack of uniform_vector_p constructors in match.pd Roger Sayle
@ 2022-05-23 10:49 ` Richard Biener
  2022-06-06  9:06   ` Richard Sandiford
  0 siblings, 1 reply; 4+ messages in thread
From: Richard Biener @ 2022-05-23 10:49 UTC (permalink / raw)
  To: Roger Sayle, Richard Sandiford; +Cc: GCC Patches

On Sat, May 21, 2022 at 5:31 PM Roger Sayle <roger@nextmovesoftware.com> wrote:
>
>
> This patch simplifies vec_unpack_hi_expr/vec_unpack_lo_expr of a uniform
> constructor or vec_duplicate operand.  The motivation is from PR 105621
> where after optimization, we're left with:
>
>   vect_cst__21 = {c_8(D), c_8(D), c_8(D), c_8(D)};
>   vect_iftmp.7_4 = [vec_unpack_hi_expr] vect_cst__21;
>
> It turns out that there are no constant folding/simplification patterns
> in match.pd, but the above can be simplified further to the equivalent:
>
>   _20 = (long int) c_8(D);
>   vect_iftmp.7_4 = [vec_duplicate_expr] _20;
>
> which on x86-64 results in one less instruction, replacing pshufd $0
> then punpackhq, with punpcklqdq.  This transformation is also useful
> for helping CSE to spot that unpack_hi and unpack_lo are equivalent.
>
> This patch has been tested on x86_64-pc-linux-gnu with make bootstrap
> and make -k check with no new failures.  Ok for mainline?

I think we need a way to query whether the target can do a VEC_DUPLICATE_EXPR.
Currently we only ever have them for VL vectors and expand via
expand_vector_broadcast which eventually simply gives up when there's no
vec_duplicate or vec_init optabs suitable.

IIRC with the VEC_PERM extension we should be able to handle
VEC_DUPLICATE via VEC_PERM?  (but we don't yet accept a scalar
input, just V1<mode>?)

I see most targets have picked up vec_duplicate but sparc, but still
we'd need to check the specific mode.  I think we can disregart
vec_init checking and only apply the transforms when vec_duplicate
is available.

Richard.

>
> 2022-05-21  Roger Sayle  <roger@nextmovesoftware.com>
>
> gcc/ChangeLog
>         * match.pd (simplify vec_unpack_hi): Simplify VEC_UNPACK_*_EXPR
>         of uniform vector constructors and vec_duplicate.
>
> gcc/testsuite/ChangeLog
>         * g++.dg/vect/pr105621.cc: New test case.
>
>
> Thanks in advance,
> Roger
> --
>

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH] Simplify vec_unpack of uniform_vector_p constructors in match.pd.
  2022-05-23 10:49 ` Richard Biener
@ 2022-06-06  9:06   ` Richard Sandiford
  2022-06-13  9:52     ` Richard Biener
  0 siblings, 1 reply; 4+ messages in thread
From: Richard Sandiford @ 2022-06-06  9:06 UTC (permalink / raw)
  To: Richard Biener; +Cc: Roger Sayle, GCC Patches

Richard Biener <richard.guenther@gmail.com> writes:
> On Sat, May 21, 2022 at 5:31 PM Roger Sayle <roger@nextmovesoftware.com> wrote:
>> This patch simplifies vec_unpack_hi_expr/vec_unpack_lo_expr of a uniform
>> constructor or vec_duplicate operand.  The motivation is from PR 105621
>> where after optimization, we're left with:
>>
>>   vect_cst__21 = {c_8(D), c_8(D), c_8(D), c_8(D)};
>>   vect_iftmp.7_4 = [vec_unpack_hi_expr] vect_cst__21;
>>
>> It turns out that there are no constant folding/simplification patterns
>> in match.pd, but the above can be simplified further to the equivalent:
>>
>>   _20 = (long int) c_8(D);
>>   vect_iftmp.7_4 = [vec_duplicate_expr] _20;
>>
>> which on x86-64 results in one less instruction, replacing pshufd $0
>> then punpackhq, with punpcklqdq.  This transformation is also useful
>> for helping CSE to spot that unpack_hi and unpack_lo are equivalent.
>>
>> This patch has been tested on x86_64-pc-linux-gnu with make bootstrap
>> and make -k check with no new failures.  Ok for mainline?
>
> I think we need a way to query whether the target can do a VEC_DUPLICATE_EXPR.
> Currently we only ever have them for VL vectors and expand via
> expand_vector_broadcast which eventually simply gives up when there's no
> vec_duplicate or vec_init optabs suitable.
>
> IIRC with the VEC_PERM extension we should be able to handle
> VEC_DUPLICATE via VEC_PERM?  (but we don't yet accept a scalar
> input, just V1<mode>?)

Yeah, should be possible.  Not sure whether it would really help though.
A VEC_PERM_EXPR with only one scalar argument could only have one sensible
permute mask[*], so there'd be a bit of false generality.

Maybe allowing scalar arguments would be more useful for 2 distinct
scalar arguments, but then I guess the question is: why stop at 2?
So if we go down the route of accepting scalars, it might be more
consistent to make VEC_PERM_EXPR support any number of operands
and use it as a replacement for CONSTRUCTOR as well.

Thanks,
Richard

[*] At least until we support “don't care” elements.  However, like I
    mentioned before, I'd personally prefer a “don't care” mask to be
    a separate operand, rather than treating something like -1 as a
    special value.  Special values like that don't really fit the
    current encoding scheme for VL constants, but a separate mask would.

    A separate don't-care mask would also work for variable permute masks.
>
> I see most targets have picked up vec_duplicate but sparc, but still
> we'd need to check the specific mode.  I think we can disregart
> vec_init checking and only apply the transforms when vec_duplicate
> is available.
>
> Richard.
>
>>
>> 2022-05-21  Roger Sayle  <roger@nextmovesoftware.com>
>>
>> gcc/ChangeLog
>>         * match.pd (simplify vec_unpack_hi): Simplify VEC_UNPACK_*_EXPR
>>         of uniform vector constructors and vec_duplicate.
>>
>> gcc/testsuite/ChangeLog
>>         * g++.dg/vect/pr105621.cc: New test case.
>>
>>
>> Thanks in advance,
>> Roger
>> --
>>

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH] Simplify vec_unpack of uniform_vector_p constructors in match.pd.
  2022-06-06  9:06   ` Richard Sandiford
@ 2022-06-13  9:52     ` Richard Biener
  0 siblings, 0 replies; 4+ messages in thread
From: Richard Biener @ 2022-06-13  9:52 UTC (permalink / raw)
  To: Richard Biener, Roger Sayle, GCC Patches, Richard Sandiford

On Mon, Jun 6, 2022 at 11:06 AM Richard Sandiford
<richard.sandiford@arm.com> wrote:
>
> Richard Biener <richard.guenther@gmail.com> writes:
> > On Sat, May 21, 2022 at 5:31 PM Roger Sayle <roger@nextmovesoftware.com> wrote:
> >> This patch simplifies vec_unpack_hi_expr/vec_unpack_lo_expr of a uniform
> >> constructor or vec_duplicate operand.  The motivation is from PR 105621
> >> where after optimization, we're left with:
> >>
> >>   vect_cst__21 = {c_8(D), c_8(D), c_8(D), c_8(D)};
> >>   vect_iftmp.7_4 = [vec_unpack_hi_expr] vect_cst__21;
> >>
> >> It turns out that there are no constant folding/simplification patterns
> >> in match.pd, but the above can be simplified further to the equivalent:
> >>
> >>   _20 = (long int) c_8(D);
> >>   vect_iftmp.7_4 = [vec_duplicate_expr] _20;
> >>
> >> which on x86-64 results in one less instruction, replacing pshufd $0
> >> then punpackhq, with punpcklqdq.  This transformation is also useful
> >> for helping CSE to spot that unpack_hi and unpack_lo are equivalent.
> >>
> >> This patch has been tested on x86_64-pc-linux-gnu with make bootstrap
> >> and make -k check with no new failures.  Ok for mainline?
> >
> > I think we need a way to query whether the target can do a VEC_DUPLICATE_EXPR.
> > Currently we only ever have them for VL vectors and expand via
> > expand_vector_broadcast which eventually simply gives up when there's no
> > vec_duplicate or vec_init optabs suitable.
> >
> > IIRC with the VEC_PERM extension we should be able to handle
> > VEC_DUPLICATE via VEC_PERM?  (but we don't yet accept a scalar
> > input, just V1<mode>?)
>
> Yeah, should be possible.  Not sure whether it would really help though.
> A VEC_PERM_EXPR with only one scalar argument could only have one sensible
> permute mask[*], so there'd be a bit of false generality.
>
> Maybe allowing scalar arguments would be more useful for 2 distinct
> scalar arguments, but then I guess the question is: why stop at 2?
> So if we go down the route of accepting scalars, it might be more
> consistent to make VEC_PERM_EXPR support any number of operands
> and use it as a replacement for CONSTRUCTOR as well.

Discussion was hijacked by the '[PATCH]AArch64 relax predicate on load
structure load
instructions' thread btw.

Roger - your eyesopen.com mail bounces, can you fix your MAINTAINERS
entry please?

Richard.

> Thanks,
> Richard
>
> [*] At least until we support “don't care” elements.  However, like I
>     mentioned before, I'd personally prefer a “don't care” mask to be
>     a separate operand, rather than treating something like -1 as a
>     special value.  Special values like that don't really fit the
>     current encoding scheme for VL constants, but a separate mask would.
>
>     A separate don't-care mask would also work for variable permute masks.
> >
> > I see most targets have picked up vec_duplicate but sparc, but still
> > we'd need to check the specific mode.  I think we can disregart
> > vec_init checking and only apply the transforms when vec_duplicate
> > is available.
> >
> > Richard.
> >
> >>
> >> 2022-05-21  Roger Sayle  <roger@nextmovesoftware.com>
> >>
> >> gcc/ChangeLog
> >>         * match.pd (simplify vec_unpack_hi): Simplify VEC_UNPACK_*_EXPR
> >>         of uniform vector constructors and vec_duplicate.
> >>
> >> gcc/testsuite/ChangeLog
> >>         * g++.dg/vect/pr105621.cc: New test case.
> >>
> >>
> >> Thanks in advance,
> >> Roger
> >> --
> >>

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2022-06-13  9:53 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-05-21 15:31 [PATCH] Simplify vec_unpack of uniform_vector_p constructors in match.pd Roger Sayle
2022-05-23 10:49 ` Richard Biener
2022-06-06  9:06   ` Richard Sandiford
2022-06-13  9:52     ` Richard Biener

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).