From: Kyrylo Tkachov <Kyrylo.Tkachov@arm.com>
To: Torbjorn SVENSSON <torbjorn.svensson@foss.st.com>,
"gcc-patches@gcc.gnu.org" <gcc-patches@gcc.gnu.org>
Subject: RE: PING^1 [PATCH] arm: Allow to override location of .gnu.sgstubs section
Date: Thu, 3 Nov 2022 09:44:33 +0000 [thread overview]
Message-ID: <PAXPR08MB6926E4E16BB4653D6D4C9E7B93389@PAXPR08MB6926.eurprd08.prod.outlook.com> (raw)
In-Reply-To: <b7b9c1da-e119-6202-d640-e23152f49c10@foss.st.com>
> -----Original Message-----
> From: Torbjorn SVENSSON <torbjorn.svensson@foss.st.com>
> Sent: Wednesday, November 2, 2022 6:19 PM
> To: gcc-patches@gcc.gnu.org
> Cc: Kyrylo Tkachov <Kyrylo.Tkachov@arm.com>
> Subject: PING^1 [PATCH] arm: Allow to override location of .gnu.sgstubs
> section
>
> Hi,
>
> Ping, https://gcc.gnu.org/pipermail/gcc-patches/2022-October/603878.html
>
Ok, thanks for pinging it.
Kyrill
> Kind regards,
> Torbjörn
>
> On 2022-10-19 11:42, Torbjörn SVENSSON wrote:
> > Depending on the DejaGNU board definition, the .gnu.sgstubs section
> > might be placed on different locations in order to suite the target.
> > With this patch, the start location of the section is overrideable
> > from the board definition with the fallback of the previously
> > hardcoded location.
> >
> > gcc/testsuite/ChangeLog:
> >
> > * gcc.target/arm/cmse/bitfield-1.c: Use overridable location.
> > * gcc.target/arm/cmse/bitfield-2.c: Likewise.
> > * gcc.target/arm/cmse/bitfield-3.c: Likewise.
> > * gcc.target/arm/cmse/cmse-20.c: Likewise.
> > * gcc.target/arm/cmse/struct-1.c: Likewise.
> > * gcc.target/arm/cmse/cmse.exp (cmse_sgstubs): New.
> >
> > Signed-off-by: Torbjörn SVENSSON <torbjorn.svensson@foss.st.com>
> > ---
> > gcc/testsuite/gcc.target/arm/cmse/bitfield-1.c | 2 +-
> > gcc/testsuite/gcc.target/arm/cmse/bitfield-2.c | 2 +-
> > gcc/testsuite/gcc.target/arm/cmse/bitfield-3.c | 2 +-
> > gcc/testsuite/gcc.target/arm/cmse/cmse-20.c | 2 +-
> > gcc/testsuite/gcc.target/arm/cmse/cmse.exp | 11 +++++++++++
> > gcc/testsuite/gcc.target/arm/cmse/struct-1.c | 2 +-
> > 6 files changed, 16 insertions(+), 5 deletions(-)
> >
> > diff --git a/gcc/testsuite/gcc.target/arm/cmse/bitfield-1.c
> b/gcc/testsuite/gcc.target/arm/cmse/bitfield-1.c
> > index 5685f744435..c1221bef29f 100644
> > --- a/gcc/testsuite/gcc.target/arm/cmse/bitfield-1.c
> > +++ b/gcc/testsuite/gcc.target/arm/cmse/bitfield-1.c
> > @@ -1,5 +1,5 @@
> > /* This test is executed only if the execution engine supports CMSE
> instructions. */
> > -/* { dg-options "--save-temps -mcmse -Wl,--section-
> start,.gnu.sgstubs=0x00400000" } */
> > +/* { dg-options "--save-temps -mcmse -Wl,--section-
> start,.gnu.sgstubs=[cmse_sgstubs]" } */
> >
> > typedef struct
> > {
> > diff --git a/gcc/testsuite/gcc.target/arm/cmse/bitfield-2.c
> b/gcc/testsuite/gcc.target/arm/cmse/bitfield-2.c
> > index 7a794d44644..79e9a3efc93 100644
> > --- a/gcc/testsuite/gcc.target/arm/cmse/bitfield-2.c
> > +++ b/gcc/testsuite/gcc.target/arm/cmse/bitfield-2.c
> > @@ -1,5 +1,5 @@
> > /* This test is executed only if the execution engine supports CMSE
> instructions. */
> > -/* { dg-options "--save-temps -mcmse -Wl,--section-
> start,.gnu.sgstubs=0x00400000" } */
> > +/* { dg-options "--save-temps -mcmse -Wl,--section-
> start,.gnu.sgstubs=[cmse_sgstubs]" } */
> >
> > typedef struct
> > {
> > diff --git a/gcc/testsuite/gcc.target/arm/cmse/bitfield-3.c
> b/gcc/testsuite/gcc.target/arm/cmse/bitfield-3.c
> > index 5875f8dff48..d621a802ee1 100644
> > --- a/gcc/testsuite/gcc.target/arm/cmse/bitfield-3.c
> > +++ b/gcc/testsuite/gcc.target/arm/cmse/bitfield-3.c
> > @@ -1,5 +1,5 @@
> > /* This test is executed only if the execution engine supports CMSE
> instructions. */
> > -/* { dg-options "--save-temps -mcmse -Wl,--section-
> start,.gnu.sgstubs=0x00400000" } */
> > +/* { dg-options "--save-temps -mcmse -Wl,--section-
> start,.gnu.sgstubs=[cmse_sgstubs]" } */
> >
> > typedef struct
> > {
> > diff --git a/gcc/testsuite/gcc.target/arm/cmse/cmse-20.c
> b/gcc/testsuite/gcc.target/arm/cmse/cmse-20.c
> > index 08e89bff637..bbea9358870 100644
> > --- a/gcc/testsuite/gcc.target/arm/cmse/cmse-20.c
> > +++ b/gcc/testsuite/gcc.target/arm/cmse/cmse-20.c
> > @@ -1,5 +1,5 @@
> > /* This test is executed only if the execution engine supports CMSE
> instructions. */
> > -/* { dg-options "--save-temps -mcmse -Wl,--section-
> start,.gnu.sgstubs=0x00400000" } */
> > +/* { dg-options "--save-temps -mcmse -Wl,--section-
> start,.gnu.sgstubs=[cmse_sgstubs]" } */
> >
> > #include <arm_cmse.h>
> > #include <stdlib.h>
> > diff --git a/gcc/testsuite/gcc.target/arm/cmse/cmse.exp
> b/gcc/testsuite/gcc.target/arm/cmse/cmse.exp
> > index 436dd71ef89..1df5d56c6d5 100644
> > --- a/gcc/testsuite/gcc.target/arm/cmse/cmse.exp
> > +++ b/gcc/testsuite/gcc.target/arm/cmse/cmse.exp
> > @@ -44,6 +44,17 @@ if {[is-effective-target arm_cmse_hw]} then {
> > set saved-lto_torture_options ${LTO_TORTURE_OPTIONS}
> > set LTO_TORTURE_OPTIONS ""
> >
> > +# Return the start address of the .gnu.sgstubs section.
> > +proc cmse_sgstubs {} {
> > + # Allow to override the location of .gnu.sgstubs section.
> > + set tboard [target_info name]
> > + if {[board_info $tboard exists cmse_sgstubs]} {
> > + return [board_info $tboard cmse_sgstubs]
> > + }
> > +
> > + return "0x00400000"
> > +}
> > +
> > # These are for both baseline and mainline.
> > gcc-dg-runtest [lsort [glob $srcdir/$subdir/*.c]] \
> > "" $DEFAULT_CFLAGS
> > diff --git a/gcc/testsuite/gcc.target/arm/cmse/struct-1.c
> b/gcc/testsuite/gcc.target/arm/cmse/struct-1.c
> > index 75a99f487e7..bebd059b13f 100644
> > --- a/gcc/testsuite/gcc.target/arm/cmse/struct-1.c
> > +++ b/gcc/testsuite/gcc.target/arm/cmse/struct-1.c
> > @@ -1,5 +1,5 @@
> > /* This test is executed only if the execution engine supports CMSE
> instructions. */
> > -/* { dg-options "--save-temps -mcmse -Wl,--section-
> start,.gnu.sgstubs=0x00400000" } */
> > +/* { dg-options "--save-temps -mcmse -Wl,--section-
> start,.gnu.sgstubs=[cmse_sgstubs]" } */
> >
> > typedef struct
> > {
next prev parent reply other threads:[~2022-11-03 9:44 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-19 9:42 Torbjörn SVENSSON
2022-10-19 9:52 ` Christophe Lyon
2022-10-19 10:07 ` Torbjorn SVENSSON
2022-11-02 18:18 ` PING^1 " Torbjorn SVENSSON
2022-11-03 9:44 ` Kyrylo Tkachov [this message]
2022-11-04 7:59 ` Torbjorn SVENSSON
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=PAXPR08MB6926E4E16BB4653D6D4C9E7B93389@PAXPR08MB6926.eurprd08.prod.outlook.com \
--to=kyrylo.tkachov@arm.com \
--cc=gcc-patches@gcc.gnu.org \
--cc=torbjorn.svensson@foss.st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).