From: WANG Xuerui <i@xen0n.name>
To: Lulu Cheng <chenglulu@loongson.cn>, gcc-patches@gcc.gnu.org
Cc: xry111@xry111.site, xuchenghua@loongson.cn,
xujiahao <xujiahao@loongson.cn>
Subject: Re: [PATCH v3] LoongArch: Add prefetch instructions.
Date: Wed, 16 Nov 2022 11:06:29 +0800 [thread overview]
Message-ID: <d937c83d-02ab-1985-c4ee-9ac9ec629c57@xen0n.name> (raw)
In-Reply-To: <20221116021027.519897-1-chenglulu@loongson.cn>
On 2022/11/16 10:10, Lulu Cheng wrote:
> v2 -> v3:
> 1. Remove preldx support.
>
> ---------------------------------------
> Enable sw prefetching at -O3 and higher.
>
> Co-Authored-By: xujiahao <xujiahao@loongson.cn>
>
> gcc/ChangeLog:
>
> * config/loongarch/constraints.md (ZD): New constraint.
> * config/loongarch/loongarch-def.c: Initial number of parallel prefetch.
> * config/loongarch/loongarch-tune.h (struct loongarch_cache):
> Define number of parallel prefetch.
> * config/loongarch/loongarch.cc (loongarch_option_override_internal):
> Set up parameters to be used in prefetching algorithm.
> * config/loongarch/loongarch.md (prefetch): New template.
> ---
> gcc/config/loongarch/constraints.md | 10 ++++++++++
> gcc/config/loongarch/loongarch-def.c | 2 ++
> gcc/config/loongarch/loongarch-tune.h | 1 +
> gcc/config/loongarch/loongarch.cc | 28 +++++++++++++++++++++++++++
> gcc/config/loongarch/loongarch.md | 14 ++++++++++++++
> 5 files changed, 55 insertions(+)
>
> diff --git a/gcc/config/loongarch/constraints.md b/gcc/config/loongarch/constraints.md
> index 43cb7b5f0f5..46f7f63ae31 100644
> --- a/gcc/config/loongarch/constraints.md
> +++ b/gcc/config/loongarch/constraints.md
> @@ -86,6 +86,10 @@
> ;; "ZB"
> ;; "An address that is held in a general-purpose register.
> ;; The offset is zero"
> +;; "ZD"
> +;; "An address operand whose address is formed by a base register
> +;; and offset that is suitable for use in instructions with the same
> +;; addressing mode as @code{preld}."
> ;; "<" "Matches a pre-dec or post-dec operand." (Global non-architectural)
> ;; ">" "Matches a pre-inc or post-inc operand." (Global non-architectural)
>
> @@ -190,3 +194,9 @@ (define_memory_constraint "ZB"
> The offset is zero"
> (and (match_code "mem")
> (match_test "REG_P (XEXP (op, 0))")))
> +
> +(define_address_constraint "ZD"
> + "An address operand whose address is formed by a base register
> + and offset that is suitable for use in instructions with the same
> + addressing mode as @code{preld}."
> + (match_test "loongarch_12bit_offset_address_p (op, mode)"))
How is this different with the "m" constraint? AFAIK preld and ld share
the same addressing mode (i.e. base register + 12-bit signed immediate
offset).
> diff --git a/gcc/config/loongarch/loongarch-def.c b/gcc/config/loongarch/loongarch-def.c
> index cbf995d81b5..80ab10a52a8 100644
> --- a/gcc/config/loongarch/loongarch-def.c
> +++ b/gcc/config/loongarch/loongarch-def.c
> @@ -62,11 +62,13 @@ loongarch_cpu_cache[N_TUNE_TYPES] = {
> .l1d_line_size = 64,
> .l1d_size = 64,
> .l2d_size = 256,
> + .simultaneous_prefetches = 4,
> },
> [CPU_LA464] = {
> .l1d_line_size = 64,
> .l1d_size = 64,
> .l2d_size = 256,
> + .simultaneous_prefetches = 4,
> },
> };
>
> diff --git a/gcc/config/loongarch/loongarch-tune.h b/gcc/config/loongarch/loongarch-tune.h
> index 6f3530f5c02..8e3eb29472b 100644
> --- a/gcc/config/loongarch/loongarch-tune.h
> +++ b/gcc/config/loongarch/loongarch-tune.h
> @@ -45,6 +45,7 @@ struct loongarch_cache {
> int l1d_line_size; /* bytes */
> int l1d_size; /* KiB */
> int l2d_size; /* kiB */
> + int simultaneous_prefetches; /* number of parallel prefetch */
nit: "prefetches" or "prefetch ops" or "int prefetch_width"?
> };
>
> #endif /* LOONGARCH_TUNE_H */
> diff --git a/gcc/config/loongarch/loongarch.cc b/gcc/config/loongarch/loongarch.cc
> index 8d5d8d965dd..8ee32c90573 100644
> --- a/gcc/config/loongarch/loongarch.cc
> +++ b/gcc/config/loongarch/loongarch.cc
> @@ -63,6 +63,7 @@ along with GCC; see the file COPYING3. If not see
> #include "context.h"
> #include "builtins.h"
> #include "rtl-iter.h"
> +#include "opts.h"
>
> /* This file should be included last. */
> #include "target-def.h"
> @@ -6100,6 +6101,33 @@ loongarch_option_override_internal (struct gcc_options *opts)
> if (loongarch_branch_cost == 0)
> loongarch_branch_cost = loongarch_cost->branch_cost;
>
> + /* Set up parameters to be used in prefetching algorithm. */
> + int simultaneous_prefetches
> + = loongarch_cpu_cache[LARCH_ACTUAL_TUNE].simultaneous_prefetches;
> +
> + SET_OPTION_IF_UNSET (opts, &global_options_set,
> + param_simultaneous_prefetches,
> + simultaneous_prefetches);
> +
> + SET_OPTION_IF_UNSET (opts, &global_options_set,
> + param_l1_cache_line_size,
> + loongarch_cpu_cache[LARCH_ACTUAL_TUNE].l1d_line_size);
> +
> + SET_OPTION_IF_UNSET (opts, &global_options_set,
> + param_l1_cache_size,
> + loongarch_cpu_cache[LARCH_ACTUAL_TUNE].l1d_size);
> +
> + SET_OPTION_IF_UNSET (opts, &global_options_set,
> + param_l2_cache_size,
> + loongarch_cpu_cache[LARCH_ACTUAL_TUNE].l2d_size);
> +
> +
> + /* Enable sw prefetching at -O3 and higher. */
> + if (opts->x_flag_prefetch_loop_arrays < 0
> + && (opts->x_optimize >= 3 || opts->x_flag_profile_use)
> + && !opts->x_optimize_size)
> + opts->x_flag_prefetch_loop_arrays = 1;
> +
> if (TARGET_DIRECT_EXTERN_ACCESS && flag_shlib)
> error ("%qs cannot be used for compiling a shared library",
> "-mdirect-extern-access");
> diff --git a/gcc/config/loongarch/loongarch.md b/gcc/config/loongarch/loongarch.md
> index 682ab961741..2fda5381904 100644
> --- a/gcc/config/loongarch/loongarch.md
> +++ b/gcc/config/loongarch/loongarch.md
> @@ -3282,6 +3282,20 @@ (define_expand "untyped_call"
> ;; ....................
> ;;
>
> +(define_insn "prefetch"
> + [(prefetch (match_operand 0 "address_operand" "ZD")
> + (match_operand 1 "const_int_operand" "n")
> + (match_operand 2 "const_int_operand" "n"))]
> + ""
> +{
> + switch (INTVAL (operands[1]))
> + {
> + case 0: return "preld\t0,%a0";
> + case 1: return "preld\t8,%a0";
> + default: gcc_unreachable ();
> + }
> +})
> +
> (define_insn "nop"
> [(const_int 0)]
> ""
next prev parent reply other threads:[~2022-11-16 3:06 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-16 2:10 Lulu Cheng
2022-11-16 3:06 ` WANG Xuerui [this message]
2022-11-16 3:19 ` Lulu Cheng
2022-11-16 16:22 ` Xi Ruoyao
2022-11-17 6:28 ` Xi Ruoyao
2022-11-23 3:08 ` [pushed][PATCH " chenglulu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d937c83d-02ab-1985-c4ee-9ac9ec629c57@xen0n.name \
--to=i@xen0n.name \
--cc=chenglulu@loongson.cn \
--cc=gcc-patches@gcc.gnu.org \
--cc=xry111@xry111.site \
--cc=xuchenghua@loongson.cn \
--cc=xujiahao@loongson.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).