* [PATCH-4, rs6000] Change ilp32 target check for some scalar-extract-sig and scalar-insert-exp test cases
@ 2023-01-04 6:17 HAO CHEN GUI
2023-04-24 5:31 ` HAO CHEN GUI
2023-05-08 6:36 ` Kewen.Lin
0 siblings, 2 replies; 3+ messages in thread
From: HAO CHEN GUI @ 2023-01-04 6:17 UTC (permalink / raw)
To: gcc-patches; +Cc: Segher Boessenkool, David, Kewen.Lin, Peter Bergner
Hi,
"ilp32" is used in these test cases to make sure test cases only run on a
32-bit environment. Unfortunately, these cases also run with
"-m32/-mpowerpc64" which causes unexpected errors. This patch changes the
target check to skip if "has_arch_ppc64" is set. So the test cases won't run
when arch_ppc64 has been set.
Bootstrapped and tested on powerpc64-linux BE and LE with no regressions.
Is this okay for trunk? Any recommendations? Thanks a lot.
Gui Haochen
ChangeLog
2023-01-03 Haochen Gui <guihaoc@linux.ibm.com>
gcc/testsuite/
* gcc.target/powerpc/bfp/scalar-extract-sig-2.c: Replace ilp32 check
with dg-skip-if has_arch_ppc64.
* gcc.target/powerpc/bfp/scalar-insert-exp-2.c: Likewise.
* gcc.target/powerpc/bfp/scalar-insert-exp-5.c: Likewise.
patch.diff
diff --git a/gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-sig-2.c b/gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-sig-2.c
index 39ee74c94dc..148b5fbd9fa 100644
--- a/gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-sig-2.c
+++ b/gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-sig-2.c
@@ -1,5 +1,5 @@
/* { dg-do compile { target { powerpc*-*-* } } } */
-/* { dg-require-effective-target ilp32 } */
+/* { dg-skip-if "" { has_arch_ppc64 } } */
/* { dg-require-effective-target powerpc_p9vector_ok } */
/* { dg-options "-mdejagnu-cpu=power9" } */
diff --git a/gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-2.c b/gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-2.c
index efd69725905..956c1183beb 100644
--- a/gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-2.c
+++ b/gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-2.c
@@ -1,5 +1,5 @@
/* { dg-do compile { target { powerpc*-*-* } } } */
-/* { dg-require-effective-target ilp32 } */
+/* { dg-skip-if "" { has_arch_ppc64 } } */
/* { dg-require-effective-target powerpc_p9vector_ok } */
/* { dg-options "-mdejagnu-cpu=power9" } */
diff --git a/gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-5.c b/gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-5.c
index f85966a6fdf..9a7949fb89a 100644
--- a/gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-5.c
+++ b/gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-5.c
@@ -1,5 +1,5 @@
/* { dg-do compile { target { powerpc*-*-* } } } */
-/* { dg-require-effective-target ilp32 } */
+/* { dg-skip-if "" { has_arch_ppc64 } } */
/* { dg-require-effective-target powerpc_p9vector_ok } */
/* { dg-options "-mdejagnu-cpu=power9" } */
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH-4, rs6000] Change ilp32 target check for some scalar-extract-sig and scalar-insert-exp test cases
2023-01-04 6:17 [PATCH-4, rs6000] Change ilp32 target check for some scalar-extract-sig and scalar-insert-exp test cases HAO CHEN GUI
@ 2023-04-24 5:31 ` HAO CHEN GUI
2023-05-08 6:36 ` Kewen.Lin
1 sibling, 0 replies; 3+ messages in thread
From: HAO CHEN GUI @ 2023-04-24 5:31 UTC (permalink / raw)
To: gcc-patches; +Cc: Segher Boessenkool, David, Kewen.Lin, Peter Bergner
Hi,
Gently ping this.
https://gcc.gnu.org/pipermail/gcc-patches/2023-January/609372.html
Thanks
Gui Haochen
在 2023/1/4 14:17, HAO CHEN GUI 写道:
> Hi,
> "ilp32" is used in these test cases to make sure test cases only run on a
> 32-bit environment. Unfortunately, these cases also run with
> "-m32/-mpowerpc64" which causes unexpected errors. This patch changes the
> target check to skip if "has_arch_ppc64" is set. So the test cases won't run
> when arch_ppc64 has been set.
>
> Bootstrapped and tested on powerpc64-linux BE and LE with no regressions.
> Is this okay for trunk? Any recommendations? Thanks a lot.
>
> Gui Haochen
>
> ChangeLog
> 2023-01-03 Haochen Gui <guihaoc@linux.ibm.com>
>
> gcc/testsuite/
> * gcc.target/powerpc/bfp/scalar-extract-sig-2.c: Replace ilp32 check
> with dg-skip-if has_arch_ppc64.
> * gcc.target/powerpc/bfp/scalar-insert-exp-2.c: Likewise.
> * gcc.target/powerpc/bfp/scalar-insert-exp-5.c: Likewise.
>
> patch.diff
> diff --git a/gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-sig-2.c b/gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-sig-2.c
> index 39ee74c94dc..148b5fbd9fa 100644
> --- a/gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-sig-2.c
> +++ b/gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-sig-2.c
> @@ -1,5 +1,5 @@
> /* { dg-do compile { target { powerpc*-*-* } } } */
> -/* { dg-require-effective-target ilp32 } */
> +/* { dg-skip-if "" { has_arch_ppc64 } } */
> /* { dg-require-effective-target powerpc_p9vector_ok } */
> /* { dg-options "-mdejagnu-cpu=power9" } */
>
> diff --git a/gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-2.c b/gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-2.c
> index efd69725905..956c1183beb 100644
> --- a/gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-2.c
> +++ b/gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-2.c
> @@ -1,5 +1,5 @@
> /* { dg-do compile { target { powerpc*-*-* } } } */
> -/* { dg-require-effective-target ilp32 } */
> +/* { dg-skip-if "" { has_arch_ppc64 } } */
> /* { dg-require-effective-target powerpc_p9vector_ok } */
> /* { dg-options "-mdejagnu-cpu=power9" } */
>
> diff --git a/gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-5.c b/gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-5.c
> index f85966a6fdf..9a7949fb89a 100644
> --- a/gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-5.c
> +++ b/gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-5.c
> @@ -1,5 +1,5 @@
> /* { dg-do compile { target { powerpc*-*-* } } } */
> -/* { dg-require-effective-target ilp32 } */
> +/* { dg-skip-if "" { has_arch_ppc64 } } */
> /* { dg-require-effective-target powerpc_p9vector_ok } */
> /* { dg-options "-mdejagnu-cpu=power9" } */
>
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH-4, rs6000] Change ilp32 target check for some scalar-extract-sig and scalar-insert-exp test cases
2023-01-04 6:17 [PATCH-4, rs6000] Change ilp32 target check for some scalar-extract-sig and scalar-insert-exp test cases HAO CHEN GUI
2023-04-24 5:31 ` HAO CHEN GUI
@ 2023-05-08 6:36 ` Kewen.Lin
1 sibling, 0 replies; 3+ messages in thread
From: Kewen.Lin @ 2023-05-08 6:36 UTC (permalink / raw)
To: HAO CHEN GUI; +Cc: Segher Boessenkool, David, Peter Bergner, gcc-patches
Hi Haochen,
on 2023/1/4 14:17, HAO CHEN GUI wrote:
> Hi,
> "ilp32" is used in these test cases to make sure test cases only run on a
> 32-bit environment. Unfortunately, these cases also run with
> "-m32/-mpowerpc64" which causes unexpected errors. This patch changes the
> target check to skip if "has_arch_ppc64" is set. So the test cases won't run
> when arch_ppc64 has been set.
I think you meant one artificial run with runtestflags like
RUNTESTFLAGS="--target_board=unix/-m32/-mpowerpc64 ...", thanks for catching,
this patch is OK for trunk.
BR,
Kewen
>
> Bootstrapped and tested on powerpc64-linux BE and LE with no regressions.
> Is this okay for trunk? Any recommendations? Thanks a lot.
>
> Gui Haochen
>
> ChangeLog
> 2023-01-03 Haochen Gui <guihaoc@linux.ibm.com>
>
> gcc/testsuite/
> * gcc.target/powerpc/bfp/scalar-extract-sig-2.c: Replace ilp32 check
> with dg-skip-if has_arch_ppc64.
> * gcc.target/powerpc/bfp/scalar-insert-exp-2.c: Likewise.
> * gcc.target/powerpc/bfp/scalar-insert-exp-5.c: Likewise.
>
> patch.diff
> diff --git a/gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-sig-2.c b/gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-sig-2.c
> index 39ee74c94dc..148b5fbd9fa 100644
> --- a/gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-sig-2.c
> +++ b/gcc/testsuite/gcc.target/powerpc/bfp/scalar-extract-sig-2.c
> @@ -1,5 +1,5 @@
> /* { dg-do compile { target { powerpc*-*-* } } } */
> -/* { dg-require-effective-target ilp32 } */
> +/* { dg-skip-if "" { has_arch_ppc64 } } */
> /* { dg-require-effective-target powerpc_p9vector_ok } */
> /* { dg-options "-mdejagnu-cpu=power9" } */
>
> diff --git a/gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-2.c b/gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-2.c
> index efd69725905..956c1183beb 100644
> --- a/gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-2.c
> +++ b/gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-2.c
> @@ -1,5 +1,5 @@
> /* { dg-do compile { target { powerpc*-*-* } } } */
> -/* { dg-require-effective-target ilp32 } */
> +/* { dg-skip-if "" { has_arch_ppc64 } } */
> /* { dg-require-effective-target powerpc_p9vector_ok } */
> /* { dg-options "-mdejagnu-cpu=power9" } */
>
> diff --git a/gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-5.c b/gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-5.c
> index f85966a6fdf..9a7949fb89a 100644
> --- a/gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-5.c
> +++ b/gcc/testsuite/gcc.target/powerpc/bfp/scalar-insert-exp-5.c
> @@ -1,5 +1,5 @@
> /* { dg-do compile { target { powerpc*-*-* } } } */
> -/* { dg-require-effective-target ilp32 } */
> +/* { dg-skip-if "" { has_arch_ppc64 } } */
> /* { dg-require-effective-target powerpc_p9vector_ok } */
> /* { dg-options "-mdejagnu-cpu=power9" } */
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-05-08 6:39 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-01-04 6:17 [PATCH-4, rs6000] Change ilp32 target check for some scalar-extract-sig and scalar-insert-exp test cases HAO CHEN GUI
2023-04-24 5:31 ` HAO CHEN GUI
2023-05-08 6:36 ` Kewen.Lin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).