Re: bootstrap/5187: gcc 3.0.3 fails to bootstrap on Sun Ultra 60with Solaris 8

Re: bootstrap/5187: gcc 3.0.3 fails to bootstrap on Sun Ultra 60with Solaris 8

[Dr. David Kirkby]

The following reply was made to PR bootstrap/5187; it has been noted by GNATS.

From: "Dr. David Kirkby" <drkirkby@ntlworld.com>
To: Jeff Sturm <jsturm@one-point.com>,
 	Paolo Carlini <pcarlini@unitus.it>,
 	gcc-help <gcc-help@gcc.gnu.org>, gcc-gnats@gcc.gnu.org
Cc:  
Subject: Re: bootstrap/5187: gcc 3.0.3 fails to bootstrap on Sun Ultra 60with  
 Solaris 8
Date: Wed, 26 Dec 2001 17:01:03 +0000

 Hi,
 	I reported problems compiling gcc-3.0.3 on a Sun Ultra 60 (Solaris 8, 2 x 300
 MHz CPUs, 768 Mb RAM). The reason for the failure to bootstrap has now be found.
 gcc required autogen to be installed, despite the fact the configure script does
 not check for autogen. Anyway, after installing autogen-5.2.12 (which needed
 guile-1.4), it was possible to bootstrap gcc-3.0.3. (I've built other versions
 of gcc, including 3, 3.0.1 and 3.0.2 without needing autogen).
 
 A couple of people suggested my problems may have been related to the fact that
 I had built gcc in the same directory as where all the sources were. So I tried
 again to build gcc, this time in a different different directory. It again would
 not build without autogen being present. I'm not using sh, but tcsh. 
 
 If, and only if, autogen is installed, it is then possible to bootstrap gcc.
 However, as I pointed out to Paolo Carlini, the installation then fails. I did
 something like this - I'm not copying this verbatum, but it should be 99.9%
 right.  Note I upgraded the sources from 3.0.2 to 3.0.3 with a diff file that I
 downloaded, rather than download gcc-3.0.3 as sources - I only have a 56 k
 modem!
 
 # cd /usr/local/src
 # gtar xvfz /downloads/gcc-3.0.2.tar.gz
 # cd gcc-3.0.2
 # /usr/local/bin/patch -p1 < /downloads/gcc-3.0.2-3.0.3.diff
 # cd /usr/local/src
 # mv gcc-3.0.2 gcc-3.0.3 (since I had patched the sources to 3.0.3, I renamed
 them)
 # mkdir gcc-3.0.3-compile-with-gcc-2.95.3
 # cd gcc-3.0.3-compile-with-gcc-2.95.3
 # ../gcc-3.0.3/configure
 --prefix=/usr/local/stow/gcc-3.0.3-compile-with-gcc-2.95.3
 # make bootstrap
 
 As I said, gcc now bootstraps properly, after the installation of autogen. But
 it does *not* install properly:
 
 # make install
 # setenv PATH /usr/local/stow/gcc-3.0.3-compile-with-gcc-2.95.3/bin:$PATH
 # setenv LD_LIBRARY_PATH
 /usr/local/stow/gcc-3.0.3-compile-with-gcc-2.95.3/lib:$LD_LIBRARY_PATH
 # rehash
 # which gcc 
 /usr/local/stow/gcc-3.0.3-compile-with-gcc-2.95.3/bin/gcc
 # gcc -v
 Using builtin specs.
 Configured with: ../gcc-3.0.3/configure
 --prefix=/usr/local/stow/gcc-3.0.3-compile-with-gcc-2.95.3 : (reconfigured) 
 Thread model: posix
 gcc version 3.0.3
 
 After creating a small test file, test.c, it is impossible to compile test.c. 
 
 # gcc test.c
 gcc: installation problem, cannot exec `cc1': No such file or directory
 
 Since cc1 was not found, but cc1 was at
 /usr/local/stow/gcc-3.0.3-compile-with-gcc-2.95.3/lib/gcc-lib/sparc-sun-solaris2.8/3.0.3/cc1
 
 a symbolic link was made to the same place as the gcc driver, so cc1 was in the
 path. I note however, that cc1 was never in the path for any other builds of
 gcc. Anyway, I did this with:
 
 # ln -s
 /usr/local/stow/gcc-3.0.3-compile-with-gcc-2.95.3/lib/gcc-lib/sparc-sun-solaris2.8/3.0.3/cc1
 /usr/local/stow/gcc-3.0.3-compile-with-gcc-2.95.3/bin
 
 At this point, gcc version 3.0.3 will compile a programme
 
 # gcc -c test.c (this compile only stage works okay).
 
 but the programme will not link. 
 
 # gcc test.c (compiles and link in one go fails).
 ld: fatal: file crt1.o: open failed: No such file or directory
 
 Given that gcc-3.0.3 could create an object file (after cc1 was put in the
 path), I decided to try to link the object file with Sun's linker /usr/ucb/ld.
 
 # ld test.o
 # ./a.out
 Hello world
 Segmentation fault
 
 So after some hacking, I can produce an executable, that runs, but then produces
 a segmentation fault error. 
 
 I've also build gcc-3.0.3 using Sun's cc compiler (cc-5.0). This is not the
 latest version of Sun's compiler, but it not that old - distributed with the
 original release of Solaris 8 in Jan 2000. The results are *exactly* the same.
 
 So in summary, these are my finding with gcc-3.0.3 on a Sun Ultra 60. Note I am
 not trying to build a 64-bit gcc. 
 
 1) Initial failure to bootstrap, due to lack of autogen on my system. 
 2) configure script does not check for autogen, yet autogen is needed. 
 3) After installation of autogen, it is possible to bootstrap gcc-3.0.3 using
 either gcc-2.95.3 or Sun's cc-5.0
 4) 'make install' will produce a compiler that is unable to compile any
 programmes, as it complains cc1 is missing. 
 5) After putting cc1 in the search path, gcc-3.0.3 is able to compile
 programmes, but linking does not occur, since crt1.o is not found. 
 6) After trying to manually link the object file created in step 4, an
 executable was produced, but although this ran, and produced the expected output
 (hello world) it produced a segmentation fault. 
 
 -- 
 Dr. David Kirkby Ph.D,
 email: drkirkby@ntlworld.com 
 former email address: davek@medphys.ucl.ac.uk
 web page: http://www.david-kirkby.co.uk/
 Amateur radio callsign: G8WRB