Re: c/10321: CC internal error

Re: c/10321: CC internal error

[bangerth]

Synopsis: CC internal error

State-Changed-From-To: open->feedback
State-Changed-By: bangerth
State-Changed-When: Mon Apr  7 14:35:10 2003
State-Changed-Why:
    We need preprocessed sources for the problem to reproduce
    it, please see the page displayed in gcc's error message.
    
    However, I see that you only have 26 MB of free memory on
    your machine. Are you sure that this isn't the source of
    the problem? That's seems mightly small these days, and I
    don't know whether gcc3.2 is supposed to compile big
    software on such machines...
    
    Regards
      Wolfgang

http://gcc.gnu.org/cgi-bin/gnatsweb.pl?cmd=view%20audit-trail&database=gcc&pr=10321

Re: c/10321: CC internal error

[David Turgeon]

The following reply was made to PR c/10321; it has been noted by GNATS.

From: "David Turgeon" <daveturgeon@catholic.org>
To: <ljrittle@gcc.gnu.org>, <daveturgeon@catholic.org>, <gcc-bugs@gcc.gnu.org>,
   <gcc-prs@gcc.gnu.org>, <nobody@gcc.gnu.org>, <gcc-gnats@gcc.gnu.org>
Cc:  
Subject: Re: c/10321: CC internal error
Date: Fri, 11 Apr 2003 17:47:16 -0600 (CST)

 > Synopsis: CC internal error
 >
 > State-Changed-From-To: feedback->closed
 > State-Changed-By: ljrittle
 > State-Changed-When: Fri Apr 11 22:27:10 2003
 > State-Changed-Why:
 >     Thank you for posting the preprocessed code.  I can compile it with
 > GNU C version 3.2.2 (i386-portbld-freebsd4.7) &
 >     GNU C version 3.2.2 [FreeBSD] 20030205 (release)
 > (i386-undermydesk-freebsd) [as installed on FreeBSD 5.x]
 >
 >     The example required >64MB of memory to compile.  Does your
 >     machine have enough swap configured?
 >     The exact error message you reported is indicative of out-of-memory
 > (check /var/log/messages for a message that looks like:
 >     Apr  3 21:14:19 latour /kernel: pid 74396 (cc1), uid 22303, was
 > killed: out of swap space)
 I will be sure to check for that error message when I install 5.0 again
 and if I run into the same problem.  I believe I had 64 mb of memory on
 the machine, unfortunenately I installed 4.8 recently and compiled it
 successfully.  But FreeBSD 5 could have higher requirements than 4.8.  I
 will probably install 5 on a different machine just to see if I have that
 same problem at a later date though, and I will check on that error
 message.  I have always been told to always go with twice as much memory
 for swap space as actual memory.  Do I ever need to go above this?  For
 example, if I have a 486 dx2 with 16 mb of ram should i install FreeBSD 5
 and only 32 mb of swap space, or do i need to go with 64 mb of swap space
 just to avoid this problem.  Thanx for your time.
 >
 >     You will have to consult FreeBSD documentation on how to configure
 > more swap.  This is not a gcc problem other than it is not reported
 > as well as it used to be (gcc 2 used to explicitly report that it
 > was out of vm, etc.)
 >
 > http://gcc.gnu.org/cgi-bin/gnatsweb.pl?cmd=view%20audit-trail&database=gcc&pr=10321
 
 
 -- 
 Sincerely,
 
 Dave Turgeon
 
 
 -----------------------------------------
 
 Meet the Reluctant Saint, Palm Sunday, April 13, 7pm ET/PT,
 on Hallmark Channel. http://www.reluctantsaint.tv
 
 During the Lenten Season, please help support the mission of
 Catholic Online by purchasing goods and services from our sponsors
 at http://www.catholic.org/clife/lent
 
 

Re: c/10321: CC internal error

[ljrittle]

Synopsis: CC internal error

State-Changed-From-To: feedback->closed
State-Changed-By: ljrittle
State-Changed-When: Fri Apr 11 22:27:10 2003
State-Changed-Why:
    Thank you for posting the preprocessed code.  I can compile it with
    GNU C version 3.2.2 (i386-portbld-freebsd4.7) &
    GNU C version 3.2.2 [FreeBSD] 20030205 (release) (i386-undermydesk-freebsd) [as installed on FreeBSD 5.x]
    
    The example required >64MB of memory to compile.  Does your
    machine have enough swap configured?
    The exact error message you reported is indicative of out-of-memory
    (check /var/log/messages for a message that looks like:
    Apr  3 21:14:19 latour /kernel: pid 74396 (cc1), uid 22303, was killed: out of swap space)
    
    You will have to consult FreeBSD documentation on how to configure
    more swap.  This is not a gcc problem other than it is not reported
    as well as it used to be (gcc 2 used to explicitly report that it was
    out of vm, etc.)

http://gcc.gnu.org/cgi-bin/gnatsweb.pl?cmd=view%20audit-trail&database=gcc&pr=10321

c/10321: CC internal error

[daveturgeon]

>Number:         10321
>Category:       c
>Synopsis:       CC internal error
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    unassigned
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sun Apr 06 18:36:01 UTC 2003
>Closed-Date:
>Last-Modified:
>Originator:     David Turgeon
>Release:        gcc version 3.2.1 [FreeBSD] 20021119 (release)
>Organization:
>Environment:
FreeBSD 5.0-RELEASE 
CPU: Pentium/P55C (125.29-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x543  Stepping = 3
  Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory  = 33554432 (32 MB)
avail memory = 28270592 (26 MB)
>Description:
when installing cyrus-imapd2 using the ports collection the
following error will occur when the db3 option is selected.
### Done building chartables.
cc -c -I.. -I/usr/local/include/db3  -I/usr/local/include -DHAVE_CONFIG_H -I. -I. -Wall -O -pipe -mcpu=pentiumpro  chartable.c
cc: Internal error: Killed (program cc1)
Please submit a full bug report.
See <URL:http://www.gnu.org/software/gcc/bugs.html> for instructions.
{standard input}: Assembler messages:
{standard input}:250997: Warning: partial line at end of file ignored
*** Error code 1

Stop in /usr/ports/mail/cyrus-imapd2/work/cyrus-imapd-2.1.12/lib.
*** Error code 1

Stop in /usr/ports/mail/cyrus-imapd2/work/cyrus-imapd-2.1.12.
*** Error code 1

Stop in /usr/ports/mail/cyrus-imapd2.
>How-To-Repeat:
on a FreeBSD5 system, install /usr/ports/mail/cyrus-imapd2, imapd or even attempt to update to glib2
eventually the following error will occur:
### Done building chartables.
cc -c -I.. -I/usr/local/include/db3  -I/usr/local/include -DHAVE_CONFIG_H -I. -I. -Wall -O -pipe -mcpu=pentiumpro  chartable.c
cc: Internal error: Killed (program cc1)
Please submit a full bug report.
See <URL:http://www.gnu.org/software/gcc/bugs.html> for instructions.
{standard input}: Assembler messages:
{standard input}:250997: Warning: partial line at end of file ignored
*** Error code 1

Stop in /usr/ports/mail/cyrus-imapd2/work/cyrus-imapd-2.1.12/lib.
*** Error code 1

Stop in /usr/ports/mail/cyrus-imapd2/work/cyrus-imapd-2.1.12.
*** Error code 1

Stop in /usr/ports/mail/cyrus-imapd2.

>Fix:

>Release-Note:
>Audit-Trail:
>Unformatted: