* [PATCH 3/3 v2] build: Regenerate build files
@ 2023-09-21 9:32 Arthur Cohen
0 siblings, 0 replies; only message in thread
From: Arthur Cohen @ 2023-09-21 9:32 UTC (permalink / raw)
To: gcc-patches; +Cc: gcc-rust, Pierre-Emmanuel Patry
From: Pierre-Emmanuel Patry <pierre-emmanuel.patry@embecosm.com>
Thanks Jakub. Fixed.
------
Regenerate all build files.
ChangeLog:
* Makefile.in: Regenerate.
* configure: Regenerate.
* libgrust/Makefile.in: New file.
* libgrust/aclocal.m4: New file.
* libgrust/configure: New file.
* libgrust/libproc_macro/Makefile.in: New file.
libgm2/ChangeLog:
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* libm2cor/Makefile.in: Regenerate.
* libm2iso/Makefile.in: Regenerate.
* libm2log/Makefile.in: Regenerate.
* libm2min/Makefile.in: Regenerate.
* libm2pim/Makefile.in: Regenerate.
Signed-off-by: Pierre-Emmanuel Patry <pierre-emmanuel.patry@embecosm.com>
---
Makefile.in | 1805 ++-
configure | 3 +-
libgm2/Makefile.in | 10 +-
libgm2/aclocal.m4 | 10 +-
libgm2/libm2cor/Makefile.in | 10 +-
libgm2/libm2iso/Makefile.in | 10 +-
libgm2/libm2log/Makefile.in | 10 +-
libgm2/libm2min/Makefile.in | 10 +-
libgm2/libm2pim/Makefile.in | 10 +-
libgrust/Makefile.in | 671 +
libgrust/aclocal.m4 | 1260 ++
libgrust/configure | 18458 +++++++++++++++++++++++++++
libgrust/libproc_macro/Makefile.in | 704 +
13 files changed, 22926 insertions(+), 45 deletions(-)
create mode 100644 libgrust/Makefile.in
create mode 100644 libgrust/aclocal.m4
create mode 100755 libgrust/configure
create mode 100644 libgrust/libproc_macro/Makefile.in
diff --git a/Makefile.in b/Makefile.in
index 2f136839c35..a06b1c4bbc6 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -1127,7 +1127,8 @@ configure-host: \
maybe-configure-libcc1 \
maybe-configure-gotools \
maybe-configure-libctf \
- maybe-configure-libsframe
+ maybe-configure-libsframe \
+ maybe-configure-libgrust
.PHONY: configure-target
configure-target: \
maybe-configure-target-libstdc++-v3 \
@@ -1152,7 +1153,8 @@ configure-target: \
maybe-configure-target-libgm2 \
maybe-configure-target-libgomp \
maybe-configure-target-libitm \
- maybe-configure-target-libatomic
+ maybe-configure-target-libatomic \
+ maybe-configure-target-libgrust
# The target built for a native non-bootstrap build.
.PHONY: all
@@ -1308,6 +1310,9 @@ all-host: maybe-all-libctf
@if libsframe-no-bootstrap
all-host: maybe-all-libsframe
@endif libsframe-no-bootstrap
+@if libgrust-no-bootstrap
+all-host: maybe-all-libgrust
+@endif libgrust-no-bootstrap
.PHONY: all-target
@@ -1352,6 +1357,7 @@ all-target: maybe-all-target-libitm
@if target-libatomic-no-bootstrap
all-target: maybe-all-target-libatomic
@endif target-libatomic-no-bootstrap
+all-target: maybe-all-target-libgrust
# Do a target for all the subdirectories. A ``make do-X'' will do a
# ``make X'' in all subdirectories (because, in general, there is a
@@ -1422,6 +1428,7 @@ info-host: maybe-info-libcc1
info-host: maybe-info-gotools
info-host: maybe-info-libctf
info-host: maybe-info-libsframe
+info-host: maybe-info-libgrust
.PHONY: info-target
@@ -1448,6 +1455,7 @@ info-target: maybe-info-target-libgm2
info-target: maybe-info-target-libgomp
info-target: maybe-info-target-libitm
info-target: maybe-info-target-libatomic
+info-target: maybe-info-target-libgrust
.PHONY: do-dvi
do-dvi:
@@ -1513,6 +1521,7 @@ dvi-host: maybe-dvi-libcc1
dvi-host: maybe-dvi-gotools
dvi-host: maybe-dvi-libctf
dvi-host: maybe-dvi-libsframe
+dvi-host: maybe-dvi-libgrust
.PHONY: dvi-target
@@ -1539,6 +1548,7 @@ dvi-target: maybe-dvi-target-libgm2
dvi-target: maybe-dvi-target-libgomp
dvi-target: maybe-dvi-target-libitm
dvi-target: maybe-dvi-target-libatomic
+dvi-target: maybe-dvi-target-libgrust
.PHONY: do-pdf
do-pdf:
@@ -1604,6 +1614,7 @@ pdf-host: maybe-pdf-libcc1
pdf-host: maybe-pdf-gotools
pdf-host: maybe-pdf-libctf
pdf-host: maybe-pdf-libsframe
+pdf-host: maybe-pdf-libgrust
.PHONY: pdf-target
@@ -1630,6 +1641,7 @@ pdf-target: maybe-pdf-target-libgm2
pdf-target: maybe-pdf-target-libgomp
pdf-target: maybe-pdf-target-libitm
pdf-target: maybe-pdf-target-libatomic
+pdf-target: maybe-pdf-target-libgrust
.PHONY: do-html
do-html:
@@ -1695,6 +1707,7 @@ html-host: maybe-html-libcc1
html-host: maybe-html-gotools
html-host: maybe-html-libctf
html-host: maybe-html-libsframe
+html-host: maybe-html-libgrust
.PHONY: html-target
@@ -1721,6 +1734,7 @@ html-target: maybe-html-target-libgm2
html-target: maybe-html-target-libgomp
html-target: maybe-html-target-libitm
html-target: maybe-html-target-libatomic
+html-target: maybe-html-target-libgrust
.PHONY: do-TAGS
do-TAGS:
@@ -1786,6 +1800,7 @@ TAGS-host: maybe-TAGS-libcc1
TAGS-host: maybe-TAGS-gotools
TAGS-host: maybe-TAGS-libctf
TAGS-host: maybe-TAGS-libsframe
+TAGS-host: maybe-TAGS-libgrust
.PHONY: TAGS-target
@@ -1812,6 +1827,7 @@ TAGS-target: maybe-TAGS-target-libgm2
TAGS-target: maybe-TAGS-target-libgomp
TAGS-target: maybe-TAGS-target-libitm
TAGS-target: maybe-TAGS-target-libatomic
+TAGS-target: maybe-TAGS-target-libgrust
.PHONY: do-install-info
do-install-info:
@@ -1877,6 +1893,7 @@ install-info-host: maybe-install-info-libcc1
install-info-host: maybe-install-info-gotools
install-info-host: maybe-install-info-libctf
install-info-host: maybe-install-info-libsframe
+install-info-host: maybe-install-info-libgrust
.PHONY: install-info-target
@@ -1903,6 +1920,7 @@ install-info-target: maybe-install-info-target-libgm2
install-info-target: maybe-install-info-target-libgomp
install-info-target: maybe-install-info-target-libitm
install-info-target: maybe-install-info-target-libatomic
+install-info-target: maybe-install-info-target-libgrust
.PHONY: do-install-dvi
do-install-dvi:
@@ -1968,6 +1986,7 @@ install-dvi-host: maybe-install-dvi-libcc1
install-dvi-host: maybe-install-dvi-gotools
install-dvi-host: maybe-install-dvi-libctf
install-dvi-host: maybe-install-dvi-libsframe
+install-dvi-host: maybe-install-dvi-libgrust
.PHONY: install-dvi-target
@@ -1994,6 +2013,7 @@ install-dvi-target: maybe-install-dvi-target-libgm2
install-dvi-target: maybe-install-dvi-target-libgomp
install-dvi-target: maybe-install-dvi-target-libitm
install-dvi-target: maybe-install-dvi-target-libatomic
+install-dvi-target: maybe-install-dvi-target-libgrust
.PHONY: do-install-pdf
do-install-pdf:
@@ -2059,6 +2079,7 @@ install-pdf-host: maybe-install-pdf-libcc1
install-pdf-host: maybe-install-pdf-gotools
install-pdf-host: maybe-install-pdf-libctf
install-pdf-host: maybe-install-pdf-libsframe
+install-pdf-host: maybe-install-pdf-libgrust
.PHONY: install-pdf-target
@@ -2085,6 +2106,7 @@ install-pdf-target: maybe-install-pdf-target-libgm2
install-pdf-target: maybe-install-pdf-target-libgomp
install-pdf-target: maybe-install-pdf-target-libitm
install-pdf-target: maybe-install-pdf-target-libatomic
+install-pdf-target: maybe-install-pdf-target-libgrust
.PHONY: do-install-html
do-install-html:
@@ -2150,6 +2172,7 @@ install-html-host: maybe-install-html-libcc1
install-html-host: maybe-install-html-gotools
install-html-host: maybe-install-html-libctf
install-html-host: maybe-install-html-libsframe
+install-html-host: maybe-install-html-libgrust
.PHONY: install-html-target
@@ -2176,6 +2199,7 @@ install-html-target: maybe-install-html-target-libgm2
install-html-target: maybe-install-html-target-libgomp
install-html-target: maybe-install-html-target-libitm
install-html-target: maybe-install-html-target-libatomic
+install-html-target: maybe-install-html-target-libgrust
.PHONY: do-installcheck
do-installcheck:
@@ -2241,6 +2265,7 @@ installcheck-host: maybe-installcheck-libcc1
installcheck-host: maybe-installcheck-gotools
installcheck-host: maybe-installcheck-libctf
installcheck-host: maybe-installcheck-libsframe
+installcheck-host: maybe-installcheck-libgrust
.PHONY: installcheck-target
@@ -2267,6 +2292,7 @@ installcheck-target: maybe-installcheck-target-libgm2
installcheck-target: maybe-installcheck-target-libgomp
installcheck-target: maybe-installcheck-target-libitm
installcheck-target: maybe-installcheck-target-libatomic
+installcheck-target: maybe-installcheck-target-libgrust
.PHONY: do-mostlyclean
do-mostlyclean:
@@ -2332,6 +2358,7 @@ mostlyclean-host: maybe-mostlyclean-libcc1
mostlyclean-host: maybe-mostlyclean-gotools
mostlyclean-host: maybe-mostlyclean-libctf
mostlyclean-host: maybe-mostlyclean-libsframe
+mostlyclean-host: maybe-mostlyclean-libgrust
.PHONY: mostlyclean-target
@@ -2358,6 +2385,7 @@ mostlyclean-target: maybe-mostlyclean-target-libgm2
mostlyclean-target: maybe-mostlyclean-target-libgomp
mostlyclean-target: maybe-mostlyclean-target-libitm
mostlyclean-target: maybe-mostlyclean-target-libatomic
+mostlyclean-target: maybe-mostlyclean-target-libgrust
.PHONY: do-clean
do-clean:
@@ -2423,6 +2451,7 @@ clean-host: maybe-clean-libcc1
clean-host: maybe-clean-gotools
clean-host: maybe-clean-libctf
clean-host: maybe-clean-libsframe
+clean-host: maybe-clean-libgrust
.PHONY: clean-target
@@ -2449,6 +2478,7 @@ clean-target: maybe-clean-target-libgm2
clean-target: maybe-clean-target-libgomp
clean-target: maybe-clean-target-libitm
clean-target: maybe-clean-target-libatomic
+clean-target: maybe-clean-target-libgrust
.PHONY: do-distclean
do-distclean:
@@ -2514,6 +2544,7 @@ distclean-host: maybe-distclean-libcc1
distclean-host: maybe-distclean-gotools
distclean-host: maybe-distclean-libctf
distclean-host: maybe-distclean-libsframe
+distclean-host: maybe-distclean-libgrust
.PHONY: distclean-target
@@ -2540,6 +2571,7 @@ distclean-target: maybe-distclean-target-libgm2
distclean-target: maybe-distclean-target-libgomp
distclean-target: maybe-distclean-target-libitm
distclean-target: maybe-distclean-target-libatomic
+distclean-target: maybe-distclean-target-libgrust
.PHONY: do-maintainer-clean
do-maintainer-clean:
@@ -2605,6 +2637,7 @@ maintainer-clean-host: maybe-maintainer-clean-libcc1
maintainer-clean-host: maybe-maintainer-clean-gotools
maintainer-clean-host: maybe-maintainer-clean-libctf
maintainer-clean-host: maybe-maintainer-clean-libsframe
+maintainer-clean-host: maybe-maintainer-clean-libgrust
.PHONY: maintainer-clean-target
@@ -2631,6 +2664,7 @@ maintainer-clean-target: maybe-maintainer-clean-target-libgm2
maintainer-clean-target: maybe-maintainer-clean-target-libgomp
maintainer-clean-target: maybe-maintainer-clean-target-libitm
maintainer-clean-target: maybe-maintainer-clean-target-libatomic
+maintainer-clean-target: maybe-maintainer-clean-target-libgrust
# Here are the targets which correspond to the do-X targets.
@@ -2753,7 +2787,8 @@ check-host: \
maybe-check-libcc1 \
maybe-check-gotools \
maybe-check-libctf \
- maybe-check-libsframe
+ maybe-check-libsframe \
+ maybe-check-libgrust
.PHONY: check-target
check-target: \
@@ -2779,7 +2814,8 @@ check-target: \
maybe-check-target-libgm2 \
maybe-check-target-libgomp \
maybe-check-target-libitm \
- maybe-check-target-libatomic
+ maybe-check-target-libatomic \
+ maybe-check-target-libgrust
do-check:
@: $(MAKE); $(unstage)
@@ -2891,7 +2927,8 @@ install-host-nogcc: \
maybe-install-libcc1 \
maybe-install-gotools \
maybe-install-libctf \
- maybe-install-libsframe
+ maybe-install-libsframe \
+ maybe-install-libgrust
.PHONY: install-host
install-host: \
@@ -2947,7 +2984,8 @@ install-host: \
maybe-install-libcc1 \
maybe-install-gotools \
maybe-install-libctf \
- maybe-install-libsframe
+ maybe-install-libsframe \
+ maybe-install-libgrust
.PHONY: install-target
install-target: \
@@ -2973,7 +3011,8 @@ install-target: \
maybe-install-target-libgm2 \
maybe-install-target-libgomp \
maybe-install-target-libitm \
- maybe-install-target-libatomic
+ maybe-install-target-libatomic \
+ maybe-install-target-libgrust
uninstall:
@echo "the uninstall target is not supported in this tree"
@@ -3058,7 +3097,8 @@ install-strip-host: \
maybe-install-strip-libcc1 \
maybe-install-strip-gotools \
maybe-install-strip-libctf \
- maybe-install-strip-libsframe
+ maybe-install-strip-libsframe \
+ maybe-install-strip-libgrust
.PHONY: install-strip-target
install-strip-target: \
@@ -3084,7 +3124,8 @@ install-strip-target: \
maybe-install-strip-target-libgm2 \
maybe-install-strip-target-libgomp \
maybe-install-strip-target-libitm \
- maybe-install-strip-target-libatomic
+ maybe-install-strip-target-libatomic \
+ maybe-install-strip-target-libgrust
### other supporting targets
@@ -44082,6 +44123,1146 @@ maintainer-clean-libsframe:
+.PHONY: configure-libgrust maybe-configure-libgrust
+maybe-configure-libgrust:
+@if gcc-bootstrap
+configure-libgrust: stage_current
+@endif gcc-bootstrap
+@if libgrust
+maybe-configure-libgrust: configure-libgrust
+configure-libgrust:
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ test ! -f $(HOST_SUBDIR)/libgrust/Makefile || exit 0; \
+ $(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)/libgrust; \
+ $(HOST_EXPORTS) \
+ echo Configuring in $(HOST_SUBDIR)/libgrust; \
+ cd "$(HOST_SUBDIR)/libgrust" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
+ *) topdir=`echo $(HOST_SUBDIR)/libgrust/ | \
+ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
+ esac; \
+ module_srcdir=libgrust; \
+ $(SHELL) \
+ $$s/$$module_srcdir/configure \
+ --srcdir=$${topdir}/$$module_srcdir \
+ $(HOST_CONFIGARGS) --build=${build_alias} --host=${host_alias} \
+ --target=${target_alias} \
+ || exit 1
+@endif libgrust
+
+
+
+.PHONY: configure-stage1-libgrust maybe-configure-stage1-libgrust
+maybe-configure-stage1-libgrust:
+@if libgrust-bootstrap
+maybe-configure-stage1-libgrust: configure-stage1-libgrust
+configure-stage1-libgrust:
+ @[ $(current_stage) = stage1 ] || $(MAKE) stage1-start
+ @$(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)/libgrust
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ TFLAGS="$(STAGE1_TFLAGS)"; \
+ test ! -f $(HOST_SUBDIR)/libgrust/Makefile || exit 0; \
+ $(HOST_EXPORTS) \
+ CFLAGS="$(STAGE1_CFLAGS)"; export CFLAGS; \
+ CXXFLAGS="$(STAGE1_CXXFLAGS)"; export CXXFLAGS; \
+ LIBCFLAGS="$(LIBCFLAGS)"; export LIBCFLAGS; \
+ echo Configuring stage 1 in $(HOST_SUBDIR)/libgrust; \
+ $(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)/libgrust; \
+ cd $(HOST_SUBDIR)/libgrust || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
+ *) topdir=`echo $(HOST_SUBDIR)/libgrust/ | \
+ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
+ esac; \
+ module_srcdir=libgrust; \
+ $(SHELL) $$s/$$module_srcdir/configure \
+ --srcdir=$${topdir}/$$module_srcdir \
+ $(HOST_CONFIGARGS) --build=${build_alias} --host=${host_alias} \
+ --target=${target_alias} \
+ \
+ $(STAGE1_CONFIGURE_FLAGS)
+@endif libgrust-bootstrap
+
+.PHONY: configure-stage2-libgrust maybe-configure-stage2-libgrust
+maybe-configure-stage2-libgrust:
+@if libgrust-bootstrap
+maybe-configure-stage2-libgrust: configure-stage2-libgrust
+configure-stage2-libgrust:
+ @[ $(current_stage) = stage2 ] || $(MAKE) stage2-start
+ @$(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)/libgrust
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ TFLAGS="$(STAGE2_TFLAGS)"; \
+ test ! -f $(HOST_SUBDIR)/libgrust/Makefile || exit 0; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ CFLAGS="$(STAGE2_CFLAGS)"; export CFLAGS; \
+ CXXFLAGS="$(STAGE2_CXXFLAGS)"; export CXXFLAGS; \
+ LIBCFLAGS="$(STAGE2_CFLAGS)"; export LIBCFLAGS; \
+ echo Configuring stage 2 in $(HOST_SUBDIR)/libgrust; \
+ $(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)/libgrust; \
+ cd $(HOST_SUBDIR)/libgrust || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
+ *) topdir=`echo $(HOST_SUBDIR)/libgrust/ | \
+ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
+ esac; \
+ module_srcdir=libgrust; \
+ $(SHELL) $$s/$$module_srcdir/configure \
+ --srcdir=$${topdir}/$$module_srcdir \
+ $(HOST_CONFIGARGS) --build=${build_alias} --host=${host_alias} \
+ --target=${target_alias} \
+ --with-build-libsubdir=$(HOST_SUBDIR) \
+ $(STAGE2_CONFIGURE_FLAGS)
+@endif libgrust-bootstrap
+
+.PHONY: configure-stage3-libgrust maybe-configure-stage3-libgrust
+maybe-configure-stage3-libgrust:
+@if libgrust-bootstrap
+maybe-configure-stage3-libgrust: configure-stage3-libgrust
+configure-stage3-libgrust:
+ @[ $(current_stage) = stage3 ] || $(MAKE) stage3-start
+ @$(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)/libgrust
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ TFLAGS="$(STAGE3_TFLAGS)"; \
+ test ! -f $(HOST_SUBDIR)/libgrust/Makefile || exit 0; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ CFLAGS="$(STAGE3_CFLAGS)"; export CFLAGS; \
+ CXXFLAGS="$(STAGE3_CXXFLAGS)"; export CXXFLAGS; \
+ LIBCFLAGS="$(STAGE3_CFLAGS)"; export LIBCFLAGS; \
+ echo Configuring stage 3 in $(HOST_SUBDIR)/libgrust; \
+ $(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)/libgrust; \
+ cd $(HOST_SUBDIR)/libgrust || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
+ *) topdir=`echo $(HOST_SUBDIR)/libgrust/ | \
+ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
+ esac; \
+ module_srcdir=libgrust; \
+ $(SHELL) $$s/$$module_srcdir/configure \
+ --srcdir=$${topdir}/$$module_srcdir \
+ $(HOST_CONFIGARGS) --build=${build_alias} --host=${host_alias} \
+ --target=${target_alias} \
+ --with-build-libsubdir=$(HOST_SUBDIR) \
+ $(STAGE3_CONFIGURE_FLAGS)
+@endif libgrust-bootstrap
+
+.PHONY: configure-stage4-libgrust maybe-configure-stage4-libgrust
+maybe-configure-stage4-libgrust:
+@if libgrust-bootstrap
+maybe-configure-stage4-libgrust: configure-stage4-libgrust
+configure-stage4-libgrust:
+ @[ $(current_stage) = stage4 ] || $(MAKE) stage4-start
+ @$(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)/libgrust
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ TFLAGS="$(STAGE4_TFLAGS)"; \
+ test ! -f $(HOST_SUBDIR)/libgrust/Makefile || exit 0; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ CFLAGS="$(STAGE4_CFLAGS)"; export CFLAGS; \
+ CXXFLAGS="$(STAGE4_CXXFLAGS)"; export CXXFLAGS; \
+ LIBCFLAGS="$(STAGE4_CFLAGS)"; export LIBCFLAGS; \
+ echo Configuring stage 4 in $(HOST_SUBDIR)/libgrust; \
+ $(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)/libgrust; \
+ cd $(HOST_SUBDIR)/libgrust || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
+ *) topdir=`echo $(HOST_SUBDIR)/libgrust/ | \
+ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
+ esac; \
+ module_srcdir=libgrust; \
+ $(SHELL) $$s/$$module_srcdir/configure \
+ --srcdir=$${topdir}/$$module_srcdir \
+ $(HOST_CONFIGARGS) --build=${build_alias} --host=${host_alias} \
+ --target=${target_alias} \
+ --with-build-libsubdir=$(HOST_SUBDIR) \
+ $(STAGE4_CONFIGURE_FLAGS)
+@endif libgrust-bootstrap
+
+.PHONY: configure-stageprofile-libgrust maybe-configure-stageprofile-libgrust
+maybe-configure-stageprofile-libgrust:
+@if libgrust-bootstrap
+maybe-configure-stageprofile-libgrust: configure-stageprofile-libgrust
+configure-stageprofile-libgrust:
+ @[ $(current_stage) = stageprofile ] || $(MAKE) stageprofile-start
+ @$(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)/libgrust
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ TFLAGS="$(STAGEprofile_TFLAGS)"; \
+ test ! -f $(HOST_SUBDIR)/libgrust/Makefile || exit 0; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ CFLAGS="$(STAGEprofile_CFLAGS)"; export CFLAGS; \
+ CXXFLAGS="$(STAGEprofile_CXXFLAGS)"; export CXXFLAGS; \
+ LIBCFLAGS="$(STAGEprofile_CFLAGS)"; export LIBCFLAGS; \
+ echo Configuring stage profile in $(HOST_SUBDIR)/libgrust; \
+ $(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)/libgrust; \
+ cd $(HOST_SUBDIR)/libgrust || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
+ *) topdir=`echo $(HOST_SUBDIR)/libgrust/ | \
+ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
+ esac; \
+ module_srcdir=libgrust; \
+ $(SHELL) $$s/$$module_srcdir/configure \
+ --srcdir=$${topdir}/$$module_srcdir \
+ $(HOST_CONFIGARGS) --build=${build_alias} --host=${host_alias} \
+ --target=${target_alias} \
+ --with-build-libsubdir=$(HOST_SUBDIR) \
+ $(STAGEprofile_CONFIGURE_FLAGS)
+@endif libgrust-bootstrap
+
+.PHONY: configure-stagetrain-libgrust maybe-configure-stagetrain-libgrust
+maybe-configure-stagetrain-libgrust:
+@if libgrust-bootstrap
+maybe-configure-stagetrain-libgrust: configure-stagetrain-libgrust
+configure-stagetrain-libgrust:
+ @[ $(current_stage) = stagetrain ] || $(MAKE) stagetrain-start
+ @$(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)/libgrust
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ TFLAGS="$(STAGEtrain_TFLAGS)"; \
+ test ! -f $(HOST_SUBDIR)/libgrust/Makefile || exit 0; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ CFLAGS="$(STAGEtrain_CFLAGS)"; export CFLAGS; \
+ CXXFLAGS="$(STAGEtrain_CXXFLAGS)"; export CXXFLAGS; \
+ LIBCFLAGS="$(STAGEtrain_CFLAGS)"; export LIBCFLAGS; \
+ echo Configuring stage train in $(HOST_SUBDIR)/libgrust; \
+ $(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)/libgrust; \
+ cd $(HOST_SUBDIR)/libgrust || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
+ *) topdir=`echo $(HOST_SUBDIR)/libgrust/ | \
+ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
+ esac; \
+ module_srcdir=libgrust; \
+ $(SHELL) $$s/$$module_srcdir/configure \
+ --srcdir=$${topdir}/$$module_srcdir \
+ $(HOST_CONFIGARGS) --build=${build_alias} --host=${host_alias} \
+ --target=${target_alias} \
+ --with-build-libsubdir=$(HOST_SUBDIR) \
+ $(STAGEtrain_CONFIGURE_FLAGS)
+@endif libgrust-bootstrap
+
+.PHONY: configure-stagefeedback-libgrust maybe-configure-stagefeedback-libgrust
+maybe-configure-stagefeedback-libgrust:
+@if libgrust-bootstrap
+maybe-configure-stagefeedback-libgrust: configure-stagefeedback-libgrust
+configure-stagefeedback-libgrust:
+ @[ $(current_stage) = stagefeedback ] || $(MAKE) stagefeedback-start
+ @$(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)/libgrust
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ TFLAGS="$(STAGEfeedback_TFLAGS)"; \
+ test ! -f $(HOST_SUBDIR)/libgrust/Makefile || exit 0; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ CFLAGS="$(STAGEfeedback_CFLAGS)"; export CFLAGS; \
+ CXXFLAGS="$(STAGEfeedback_CXXFLAGS)"; export CXXFLAGS; \
+ LIBCFLAGS="$(STAGEfeedback_CFLAGS)"; export LIBCFLAGS; \
+ echo Configuring stage feedback in $(HOST_SUBDIR)/libgrust; \
+ $(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)/libgrust; \
+ cd $(HOST_SUBDIR)/libgrust || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
+ *) topdir=`echo $(HOST_SUBDIR)/libgrust/ | \
+ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
+ esac; \
+ module_srcdir=libgrust; \
+ $(SHELL) $$s/$$module_srcdir/configure \
+ --srcdir=$${topdir}/$$module_srcdir \
+ $(HOST_CONFIGARGS) --build=${build_alias} --host=${host_alias} \
+ --target=${target_alias} \
+ --with-build-libsubdir=$(HOST_SUBDIR) \
+ $(STAGEfeedback_CONFIGURE_FLAGS)
+@endif libgrust-bootstrap
+
+.PHONY: configure-stageautoprofile-libgrust maybe-configure-stageautoprofile-libgrust
+maybe-configure-stageautoprofile-libgrust:
+@if libgrust-bootstrap
+maybe-configure-stageautoprofile-libgrust: configure-stageautoprofile-libgrust
+configure-stageautoprofile-libgrust:
+ @[ $(current_stage) = stageautoprofile ] || $(MAKE) stageautoprofile-start
+ @$(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)/libgrust
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ TFLAGS="$(STAGEautoprofile_TFLAGS)"; \
+ test ! -f $(HOST_SUBDIR)/libgrust/Makefile || exit 0; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ CFLAGS="$(STAGEautoprofile_CFLAGS)"; export CFLAGS; \
+ CXXFLAGS="$(STAGEautoprofile_CXXFLAGS)"; export CXXFLAGS; \
+ LIBCFLAGS="$(STAGEautoprofile_CFLAGS)"; export LIBCFLAGS; \
+ echo Configuring stage autoprofile in $(HOST_SUBDIR)/libgrust; \
+ $(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)/libgrust; \
+ cd $(HOST_SUBDIR)/libgrust || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
+ *) topdir=`echo $(HOST_SUBDIR)/libgrust/ | \
+ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
+ esac; \
+ module_srcdir=libgrust; \
+ $(SHELL) $$s/$$module_srcdir/configure \
+ --srcdir=$${topdir}/$$module_srcdir \
+ $(HOST_CONFIGARGS) --build=${build_alias} --host=${host_alias} \
+ --target=${target_alias} \
+ --with-build-libsubdir=$(HOST_SUBDIR) \
+ $(STAGEautoprofile_CONFIGURE_FLAGS)
+@endif libgrust-bootstrap
+
+.PHONY: configure-stageautofeedback-libgrust maybe-configure-stageautofeedback-libgrust
+maybe-configure-stageautofeedback-libgrust:
+@if libgrust-bootstrap
+maybe-configure-stageautofeedback-libgrust: configure-stageautofeedback-libgrust
+configure-stageautofeedback-libgrust:
+ @[ $(current_stage) = stageautofeedback ] || $(MAKE) stageautofeedback-start
+ @$(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)/libgrust
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ TFLAGS="$(STAGEautofeedback_TFLAGS)"; \
+ test ! -f $(HOST_SUBDIR)/libgrust/Makefile || exit 0; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ CFLAGS="$(STAGEautofeedback_CFLAGS)"; export CFLAGS; \
+ CXXFLAGS="$(STAGEautofeedback_CXXFLAGS)"; export CXXFLAGS; \
+ LIBCFLAGS="$(STAGEautofeedback_CFLAGS)"; export LIBCFLAGS; \
+ echo Configuring stage autofeedback in $(HOST_SUBDIR)/libgrust; \
+ $(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)/libgrust; \
+ cd $(HOST_SUBDIR)/libgrust || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
+ *) topdir=`echo $(HOST_SUBDIR)/libgrust/ | \
+ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
+ esac; \
+ module_srcdir=libgrust; \
+ $(SHELL) $$s/$$module_srcdir/configure \
+ --srcdir=$${topdir}/$$module_srcdir \
+ $(HOST_CONFIGARGS) --build=${build_alias} --host=${host_alias} \
+ --target=${target_alias} \
+ --with-build-libsubdir=$(HOST_SUBDIR) \
+ $(STAGEautofeedback_CONFIGURE_FLAGS)
+@endif libgrust-bootstrap
+
+
+
+
+
+.PHONY: all-libgrust maybe-all-libgrust
+maybe-all-libgrust:
+@if gcc-bootstrap
+all-libgrust: stage_current
+@endif gcc-bootstrap
+@if libgrust
+TARGET-libgrust=all
+maybe-all-libgrust: all-libgrust
+all-libgrust: configure-libgrust
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ (cd $(HOST_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS) $(STAGE1_FLAGS_TO_PASS) \
+ $(TARGET-libgrust))
+@endif libgrust
+
+
+
+.PHONY: all-stage1-libgrust maybe-all-stage1-libgrust
+.PHONY: clean-stage1-libgrust maybe-clean-stage1-libgrust
+maybe-all-stage1-libgrust:
+maybe-clean-stage1-libgrust:
+@if libgrust-bootstrap
+maybe-all-stage1-libgrust: all-stage1-libgrust
+all-stage1: all-stage1-libgrust
+TARGET-stage1-libgrust = $(TARGET-libgrust)
+all-stage1-libgrust: configure-stage1-libgrust
+ @[ $(current_stage) = stage1 ] || $(MAKE) stage1-start
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ TFLAGS="$(STAGE1_TFLAGS)"; \
+ $(HOST_EXPORTS) \
+ cd $(HOST_SUBDIR)/libgrust && \
+ \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) \
+ CFLAGS="$(STAGE1_CFLAGS)" \
+ GENERATOR_CFLAGS="$(STAGE1_GENERATOR_CFLAGS)" \
+ CXXFLAGS="$(STAGE1_CXXFLAGS)" \
+ LIBCFLAGS="$(LIBCFLAGS)" \
+ CFLAGS_FOR_TARGET="$(CFLAGS_FOR_TARGET)" \
+ CXXFLAGS_FOR_TARGET="$(CXXFLAGS_FOR_TARGET)" \
+ LIBCFLAGS_FOR_TARGET="$(LIBCFLAGS_FOR_TARGET)" \
+ $(EXTRA_HOST_FLAGS) \
+ $(STAGE1_FLAGS_TO_PASS) \
+ TFLAGS="$(STAGE1_TFLAGS)" \
+ $(TARGET-stage1-libgrust)
+
+maybe-clean-stage1-libgrust: clean-stage1-libgrust
+clean-stage1: clean-stage1-libgrust
+clean-stage1-libgrust:
+ @if [ $(current_stage) = stage1 ]; then \
+ [ -f $(HOST_SUBDIR)/libgrust/Makefile ] || exit 0; \
+ else \
+ [ -f $(HOST_SUBDIR)/stage1-libgrust/Makefile ] || exit 0; \
+ $(MAKE) stage1-start; \
+ fi; \
+ cd $(HOST_SUBDIR)/libgrust && \
+ $(MAKE) $(EXTRA_HOST_FLAGS) \
+ $(STAGE1_FLAGS_TO_PASS) clean
+@endif libgrust-bootstrap
+
+
+.PHONY: all-stage2-libgrust maybe-all-stage2-libgrust
+.PHONY: clean-stage2-libgrust maybe-clean-stage2-libgrust
+maybe-all-stage2-libgrust:
+maybe-clean-stage2-libgrust:
+@if libgrust-bootstrap
+maybe-all-stage2-libgrust: all-stage2-libgrust
+all-stage2: all-stage2-libgrust
+TARGET-stage2-libgrust = $(TARGET-libgrust)
+all-stage2-libgrust: configure-stage2-libgrust
+ @[ $(current_stage) = stage2 ] || $(MAKE) stage2-start
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ TFLAGS="$(STAGE2_TFLAGS)"; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ cd $(HOST_SUBDIR)/libgrust && \
+ \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) \
+ CFLAGS="$(STAGE2_CFLAGS)" \
+ GENERATOR_CFLAGS="$(STAGE2_GENERATOR_CFLAGS)" \
+ CXXFLAGS="$(STAGE2_CXXFLAGS)" \
+ LIBCFLAGS="$(STAGE2_CFLAGS)" \
+ CFLAGS_FOR_TARGET="$(CFLAGS_FOR_TARGET)" \
+ CXXFLAGS_FOR_TARGET="$(CXXFLAGS_FOR_TARGET)" \
+ LIBCFLAGS_FOR_TARGET="$(LIBCFLAGS_FOR_TARGET)" \
+ $(EXTRA_HOST_FLAGS) $(POSTSTAGE1_FLAGS_TO_PASS) \
+ TFLAGS="$(STAGE2_TFLAGS)" \
+ $(TARGET-stage2-libgrust)
+
+maybe-clean-stage2-libgrust: clean-stage2-libgrust
+clean-stage2: clean-stage2-libgrust
+clean-stage2-libgrust:
+ @if [ $(current_stage) = stage2 ]; then \
+ [ -f $(HOST_SUBDIR)/libgrust/Makefile ] || exit 0; \
+ else \
+ [ -f $(HOST_SUBDIR)/stage2-libgrust/Makefile ] || exit 0; \
+ $(MAKE) stage2-start; \
+ fi; \
+ cd $(HOST_SUBDIR)/libgrust && \
+ $(MAKE) $(EXTRA_HOST_FLAGS) $(POSTSTAGE1_FLAGS_TO_PASS) clean
+@endif libgrust-bootstrap
+
+
+.PHONY: all-stage3-libgrust maybe-all-stage3-libgrust
+.PHONY: clean-stage3-libgrust maybe-clean-stage3-libgrust
+maybe-all-stage3-libgrust:
+maybe-clean-stage3-libgrust:
+@if libgrust-bootstrap
+maybe-all-stage3-libgrust: all-stage3-libgrust
+all-stage3: all-stage3-libgrust
+TARGET-stage3-libgrust = $(TARGET-libgrust)
+all-stage3-libgrust: configure-stage3-libgrust
+ @[ $(current_stage) = stage3 ] || $(MAKE) stage3-start
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ TFLAGS="$(STAGE3_TFLAGS)"; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ cd $(HOST_SUBDIR)/libgrust && \
+ \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) \
+ CFLAGS="$(STAGE3_CFLAGS)" \
+ GENERATOR_CFLAGS="$(STAGE3_GENERATOR_CFLAGS)" \
+ CXXFLAGS="$(STAGE3_CXXFLAGS)" \
+ LIBCFLAGS="$(STAGE3_CFLAGS)" \
+ CFLAGS_FOR_TARGET="$(CFLAGS_FOR_TARGET)" \
+ CXXFLAGS_FOR_TARGET="$(CXXFLAGS_FOR_TARGET)" \
+ LIBCFLAGS_FOR_TARGET="$(LIBCFLAGS_FOR_TARGET)" \
+ $(EXTRA_HOST_FLAGS) $(POSTSTAGE1_FLAGS_TO_PASS) \
+ TFLAGS="$(STAGE3_TFLAGS)" \
+ $(TARGET-stage3-libgrust)
+
+maybe-clean-stage3-libgrust: clean-stage3-libgrust
+clean-stage3: clean-stage3-libgrust
+clean-stage3-libgrust:
+ @if [ $(current_stage) = stage3 ]; then \
+ [ -f $(HOST_SUBDIR)/libgrust/Makefile ] || exit 0; \
+ else \
+ [ -f $(HOST_SUBDIR)/stage3-libgrust/Makefile ] || exit 0; \
+ $(MAKE) stage3-start; \
+ fi; \
+ cd $(HOST_SUBDIR)/libgrust && \
+ $(MAKE) $(EXTRA_HOST_FLAGS) $(POSTSTAGE1_FLAGS_TO_PASS) clean
+@endif libgrust-bootstrap
+
+
+.PHONY: all-stage4-libgrust maybe-all-stage4-libgrust
+.PHONY: clean-stage4-libgrust maybe-clean-stage4-libgrust
+maybe-all-stage4-libgrust:
+maybe-clean-stage4-libgrust:
+@if libgrust-bootstrap
+maybe-all-stage4-libgrust: all-stage4-libgrust
+all-stage4: all-stage4-libgrust
+TARGET-stage4-libgrust = $(TARGET-libgrust)
+all-stage4-libgrust: configure-stage4-libgrust
+ @[ $(current_stage) = stage4 ] || $(MAKE) stage4-start
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ TFLAGS="$(STAGE4_TFLAGS)"; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ cd $(HOST_SUBDIR)/libgrust && \
+ \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) \
+ CFLAGS="$(STAGE4_CFLAGS)" \
+ GENERATOR_CFLAGS="$(STAGE4_GENERATOR_CFLAGS)" \
+ CXXFLAGS="$(STAGE4_CXXFLAGS)" \
+ LIBCFLAGS="$(STAGE4_CFLAGS)" \
+ CFLAGS_FOR_TARGET="$(CFLAGS_FOR_TARGET)" \
+ CXXFLAGS_FOR_TARGET="$(CXXFLAGS_FOR_TARGET)" \
+ LIBCFLAGS_FOR_TARGET="$(LIBCFLAGS_FOR_TARGET)" \
+ $(EXTRA_HOST_FLAGS) $(POSTSTAGE1_FLAGS_TO_PASS) \
+ TFLAGS="$(STAGE4_TFLAGS)" \
+ $(TARGET-stage4-libgrust)
+
+maybe-clean-stage4-libgrust: clean-stage4-libgrust
+clean-stage4: clean-stage4-libgrust
+clean-stage4-libgrust:
+ @if [ $(current_stage) = stage4 ]; then \
+ [ -f $(HOST_SUBDIR)/libgrust/Makefile ] || exit 0; \
+ else \
+ [ -f $(HOST_SUBDIR)/stage4-libgrust/Makefile ] || exit 0; \
+ $(MAKE) stage4-start; \
+ fi; \
+ cd $(HOST_SUBDIR)/libgrust && \
+ $(MAKE) $(EXTRA_HOST_FLAGS) $(POSTSTAGE1_FLAGS_TO_PASS) clean
+@endif libgrust-bootstrap
+
+
+.PHONY: all-stageprofile-libgrust maybe-all-stageprofile-libgrust
+.PHONY: clean-stageprofile-libgrust maybe-clean-stageprofile-libgrust
+maybe-all-stageprofile-libgrust:
+maybe-clean-stageprofile-libgrust:
+@if libgrust-bootstrap
+maybe-all-stageprofile-libgrust: all-stageprofile-libgrust
+all-stageprofile: all-stageprofile-libgrust
+TARGET-stageprofile-libgrust = $(TARGET-libgrust)
+all-stageprofile-libgrust: configure-stageprofile-libgrust
+ @[ $(current_stage) = stageprofile ] || $(MAKE) stageprofile-start
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ TFLAGS="$(STAGEprofile_TFLAGS)"; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ cd $(HOST_SUBDIR)/libgrust && \
+ \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) \
+ CFLAGS="$(STAGEprofile_CFLAGS)" \
+ GENERATOR_CFLAGS="$(STAGEprofile_GENERATOR_CFLAGS)" \
+ CXXFLAGS="$(STAGEprofile_CXXFLAGS)" \
+ LIBCFLAGS="$(STAGEprofile_CFLAGS)" \
+ CFLAGS_FOR_TARGET="$(CFLAGS_FOR_TARGET)" \
+ CXXFLAGS_FOR_TARGET="$(CXXFLAGS_FOR_TARGET)" \
+ LIBCFLAGS_FOR_TARGET="$(LIBCFLAGS_FOR_TARGET)" \
+ $(EXTRA_HOST_FLAGS) $(POSTSTAGE1_FLAGS_TO_PASS) \
+ TFLAGS="$(STAGEprofile_TFLAGS)" \
+ $(TARGET-stageprofile-libgrust)
+
+maybe-clean-stageprofile-libgrust: clean-stageprofile-libgrust
+clean-stageprofile: clean-stageprofile-libgrust
+clean-stageprofile-libgrust:
+ @if [ $(current_stage) = stageprofile ]; then \
+ [ -f $(HOST_SUBDIR)/libgrust/Makefile ] || exit 0; \
+ else \
+ [ -f $(HOST_SUBDIR)/stageprofile-libgrust/Makefile ] || exit 0; \
+ $(MAKE) stageprofile-start; \
+ fi; \
+ cd $(HOST_SUBDIR)/libgrust && \
+ $(MAKE) $(EXTRA_HOST_FLAGS) $(POSTSTAGE1_FLAGS_TO_PASS) clean
+@endif libgrust-bootstrap
+
+
+.PHONY: all-stagetrain-libgrust maybe-all-stagetrain-libgrust
+.PHONY: clean-stagetrain-libgrust maybe-clean-stagetrain-libgrust
+maybe-all-stagetrain-libgrust:
+maybe-clean-stagetrain-libgrust:
+@if libgrust-bootstrap
+maybe-all-stagetrain-libgrust: all-stagetrain-libgrust
+all-stagetrain: all-stagetrain-libgrust
+TARGET-stagetrain-libgrust = $(TARGET-libgrust)
+all-stagetrain-libgrust: configure-stagetrain-libgrust
+ @[ $(current_stage) = stagetrain ] || $(MAKE) stagetrain-start
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ TFLAGS="$(STAGEtrain_TFLAGS)"; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ cd $(HOST_SUBDIR)/libgrust && \
+ \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) \
+ CFLAGS="$(STAGEtrain_CFLAGS)" \
+ GENERATOR_CFLAGS="$(STAGEtrain_GENERATOR_CFLAGS)" \
+ CXXFLAGS="$(STAGEtrain_CXXFLAGS)" \
+ LIBCFLAGS="$(STAGEtrain_CFLAGS)" \
+ CFLAGS_FOR_TARGET="$(CFLAGS_FOR_TARGET)" \
+ CXXFLAGS_FOR_TARGET="$(CXXFLAGS_FOR_TARGET)" \
+ LIBCFLAGS_FOR_TARGET="$(LIBCFLAGS_FOR_TARGET)" \
+ $(EXTRA_HOST_FLAGS) $(POSTSTAGE1_FLAGS_TO_PASS) \
+ TFLAGS="$(STAGEtrain_TFLAGS)" \
+ $(TARGET-stagetrain-libgrust)
+
+maybe-clean-stagetrain-libgrust: clean-stagetrain-libgrust
+clean-stagetrain: clean-stagetrain-libgrust
+clean-stagetrain-libgrust:
+ @if [ $(current_stage) = stagetrain ]; then \
+ [ -f $(HOST_SUBDIR)/libgrust/Makefile ] || exit 0; \
+ else \
+ [ -f $(HOST_SUBDIR)/stagetrain-libgrust/Makefile ] || exit 0; \
+ $(MAKE) stagetrain-start; \
+ fi; \
+ cd $(HOST_SUBDIR)/libgrust && \
+ $(MAKE) $(EXTRA_HOST_FLAGS) $(POSTSTAGE1_FLAGS_TO_PASS) clean
+@endif libgrust-bootstrap
+
+
+.PHONY: all-stagefeedback-libgrust maybe-all-stagefeedback-libgrust
+.PHONY: clean-stagefeedback-libgrust maybe-clean-stagefeedback-libgrust
+maybe-all-stagefeedback-libgrust:
+maybe-clean-stagefeedback-libgrust:
+@if libgrust-bootstrap
+maybe-all-stagefeedback-libgrust: all-stagefeedback-libgrust
+all-stagefeedback: all-stagefeedback-libgrust
+TARGET-stagefeedback-libgrust = $(TARGET-libgrust)
+all-stagefeedback-libgrust: configure-stagefeedback-libgrust
+ @[ $(current_stage) = stagefeedback ] || $(MAKE) stagefeedback-start
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ TFLAGS="$(STAGEfeedback_TFLAGS)"; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ cd $(HOST_SUBDIR)/libgrust && \
+ \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) \
+ CFLAGS="$(STAGEfeedback_CFLAGS)" \
+ GENERATOR_CFLAGS="$(STAGEfeedback_GENERATOR_CFLAGS)" \
+ CXXFLAGS="$(STAGEfeedback_CXXFLAGS)" \
+ LIBCFLAGS="$(STAGEfeedback_CFLAGS)" \
+ CFLAGS_FOR_TARGET="$(CFLAGS_FOR_TARGET)" \
+ CXXFLAGS_FOR_TARGET="$(CXXFLAGS_FOR_TARGET)" \
+ LIBCFLAGS_FOR_TARGET="$(LIBCFLAGS_FOR_TARGET)" \
+ $(EXTRA_HOST_FLAGS) $(POSTSTAGE1_FLAGS_TO_PASS) \
+ TFLAGS="$(STAGEfeedback_TFLAGS)" \
+ $(TARGET-stagefeedback-libgrust)
+
+maybe-clean-stagefeedback-libgrust: clean-stagefeedback-libgrust
+clean-stagefeedback: clean-stagefeedback-libgrust
+clean-stagefeedback-libgrust:
+ @if [ $(current_stage) = stagefeedback ]; then \
+ [ -f $(HOST_SUBDIR)/libgrust/Makefile ] || exit 0; \
+ else \
+ [ -f $(HOST_SUBDIR)/stagefeedback-libgrust/Makefile ] || exit 0; \
+ $(MAKE) stagefeedback-start; \
+ fi; \
+ cd $(HOST_SUBDIR)/libgrust && \
+ $(MAKE) $(EXTRA_HOST_FLAGS) $(POSTSTAGE1_FLAGS_TO_PASS) clean
+@endif libgrust-bootstrap
+
+
+.PHONY: all-stageautoprofile-libgrust maybe-all-stageautoprofile-libgrust
+.PHONY: clean-stageautoprofile-libgrust maybe-clean-stageautoprofile-libgrust
+maybe-all-stageautoprofile-libgrust:
+maybe-clean-stageautoprofile-libgrust:
+@if libgrust-bootstrap
+maybe-all-stageautoprofile-libgrust: all-stageautoprofile-libgrust
+all-stageautoprofile: all-stageautoprofile-libgrust
+TARGET-stageautoprofile-libgrust = $(TARGET-libgrust)
+all-stageautoprofile-libgrust: configure-stageautoprofile-libgrust
+ @[ $(current_stage) = stageautoprofile ] || $(MAKE) stageautoprofile-start
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ TFLAGS="$(STAGEautoprofile_TFLAGS)"; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ cd $(HOST_SUBDIR)/libgrust && \
+ $$s/gcc/config/i386/$(AUTO_PROFILE) \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) \
+ CFLAGS="$(STAGEautoprofile_CFLAGS)" \
+ GENERATOR_CFLAGS="$(STAGEautoprofile_GENERATOR_CFLAGS)" \
+ CXXFLAGS="$(STAGEautoprofile_CXXFLAGS)" \
+ LIBCFLAGS="$(STAGEautoprofile_CFLAGS)" \
+ CFLAGS_FOR_TARGET="$(CFLAGS_FOR_TARGET)" \
+ CXXFLAGS_FOR_TARGET="$(CXXFLAGS_FOR_TARGET)" \
+ LIBCFLAGS_FOR_TARGET="$(LIBCFLAGS_FOR_TARGET)" \
+ $(EXTRA_HOST_FLAGS) $(POSTSTAGE1_FLAGS_TO_PASS) \
+ TFLAGS="$(STAGEautoprofile_TFLAGS)" \
+ $(TARGET-stageautoprofile-libgrust)
+
+maybe-clean-stageautoprofile-libgrust: clean-stageautoprofile-libgrust
+clean-stageautoprofile: clean-stageautoprofile-libgrust
+clean-stageautoprofile-libgrust:
+ @if [ $(current_stage) = stageautoprofile ]; then \
+ [ -f $(HOST_SUBDIR)/libgrust/Makefile ] || exit 0; \
+ else \
+ [ -f $(HOST_SUBDIR)/stageautoprofile-libgrust/Makefile ] || exit 0; \
+ $(MAKE) stageautoprofile-start; \
+ fi; \
+ cd $(HOST_SUBDIR)/libgrust && \
+ $(MAKE) $(EXTRA_HOST_FLAGS) $(POSTSTAGE1_FLAGS_TO_PASS) clean
+@endif libgrust-bootstrap
+
+
+.PHONY: all-stageautofeedback-libgrust maybe-all-stageautofeedback-libgrust
+.PHONY: clean-stageautofeedback-libgrust maybe-clean-stageautofeedback-libgrust
+maybe-all-stageautofeedback-libgrust:
+maybe-clean-stageautofeedback-libgrust:
+@if libgrust-bootstrap
+maybe-all-stageautofeedback-libgrust: all-stageautofeedback-libgrust
+all-stageautofeedback: all-stageautofeedback-libgrust
+TARGET-stageautofeedback-libgrust = $(TARGET-libgrust)
+all-stageautofeedback-libgrust: configure-stageautofeedback-libgrust
+ @[ $(current_stage) = stageautofeedback ] || $(MAKE) stageautofeedback-start
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ TFLAGS="$(STAGEautofeedback_TFLAGS)"; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ cd $(HOST_SUBDIR)/libgrust && \
+ \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) \
+ CFLAGS="$(STAGEautofeedback_CFLAGS)" \
+ GENERATOR_CFLAGS="$(STAGEautofeedback_GENERATOR_CFLAGS)" \
+ CXXFLAGS="$(STAGEautofeedback_CXXFLAGS)" \
+ LIBCFLAGS="$(STAGEautofeedback_CFLAGS)" \
+ CFLAGS_FOR_TARGET="$(CFLAGS_FOR_TARGET)" \
+ CXXFLAGS_FOR_TARGET="$(CXXFLAGS_FOR_TARGET)" \
+ LIBCFLAGS_FOR_TARGET="$(LIBCFLAGS_FOR_TARGET)" \
+ $(EXTRA_HOST_FLAGS) $(POSTSTAGE1_FLAGS_TO_PASS) \
+ TFLAGS="$(STAGEautofeedback_TFLAGS)" PERF_DATA=perf.data \
+ $(TARGET-stageautofeedback-libgrust)
+
+maybe-clean-stageautofeedback-libgrust: clean-stageautofeedback-libgrust
+clean-stageautofeedback: clean-stageautofeedback-libgrust
+clean-stageautofeedback-libgrust:
+ @if [ $(current_stage) = stageautofeedback ]; then \
+ [ -f $(HOST_SUBDIR)/libgrust/Makefile ] || exit 0; \
+ else \
+ [ -f $(HOST_SUBDIR)/stageautofeedback-libgrust/Makefile ] || exit 0; \
+ $(MAKE) stageautofeedback-start; \
+ fi; \
+ cd $(HOST_SUBDIR)/libgrust && \
+ $(MAKE) $(EXTRA_HOST_FLAGS) $(POSTSTAGE1_FLAGS_TO_PASS) clean
+@endif libgrust-bootstrap
+
+
+
+
+
+.PHONY: check-libgrust maybe-check-libgrust
+maybe-check-libgrust:
+@if libgrust
+maybe-check-libgrust: check-libgrust
+
+check-libgrust:
+ @: $(MAKE); $(unstage)
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) $(EXTRA_HOST_EXPORTS) \
+ (cd $(HOST_SUBDIR)/libgrust && \
+ $(MAKE) $(FLAGS_TO_PASS) $(EXTRA_BOOTSTRAP_FLAGS) check)
+
+@endif libgrust
+
+.PHONY: install-libgrust maybe-install-libgrust
+maybe-install-libgrust:
+@if libgrust
+maybe-install-libgrust: install-libgrust
+
+install-libgrust: installdirs
+ @: $(MAKE); $(unstage)
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ (cd $(HOST_SUBDIR)/libgrust && \
+ $(MAKE) $(FLAGS_TO_PASS) install)
+
+@endif libgrust
+
+.PHONY: install-strip-libgrust maybe-install-strip-libgrust
+maybe-install-strip-libgrust:
+@if libgrust
+maybe-install-strip-libgrust: install-strip-libgrust
+
+install-strip-libgrust: installdirs
+ @: $(MAKE); $(unstage)
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ (cd $(HOST_SUBDIR)/libgrust && \
+ $(MAKE) $(FLAGS_TO_PASS) install-strip)
+
+@endif libgrust
+
+# Other targets (info, dvi, pdf, etc.)
+
+.PHONY: maybe-info-libgrust info-libgrust
+maybe-info-libgrust:
+@if libgrust
+maybe-info-libgrust: info-libgrust
+
+info-libgrust: \
+ configure-libgrust
+ @[ -f ./libgrust/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing info in libgrust"; \
+ (cd $(HOST_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ info) \
+ || exit 1
+
+@endif libgrust
+
+.PHONY: maybe-dvi-libgrust dvi-libgrust
+maybe-dvi-libgrust:
+@if libgrust
+maybe-dvi-libgrust: dvi-libgrust
+
+dvi-libgrust: \
+ configure-libgrust
+ @[ -f ./libgrust/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing dvi in libgrust"; \
+ (cd $(HOST_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ dvi) \
+ || exit 1
+
+@endif libgrust
+
+.PHONY: maybe-pdf-libgrust pdf-libgrust
+maybe-pdf-libgrust:
+@if libgrust
+maybe-pdf-libgrust: pdf-libgrust
+
+pdf-libgrust: \
+ configure-libgrust
+ @[ -f ./libgrust/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing pdf in libgrust"; \
+ (cd $(HOST_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ pdf) \
+ || exit 1
+
+@endif libgrust
+
+.PHONY: maybe-html-libgrust html-libgrust
+maybe-html-libgrust:
+@if libgrust
+maybe-html-libgrust: html-libgrust
+
+html-libgrust: \
+ configure-libgrust
+ @[ -f ./libgrust/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing html in libgrust"; \
+ (cd $(HOST_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ html) \
+ || exit 1
+
+@endif libgrust
+
+.PHONY: maybe-TAGS-libgrust TAGS-libgrust
+maybe-TAGS-libgrust:
+@if libgrust
+maybe-TAGS-libgrust: TAGS-libgrust
+
+TAGS-libgrust: \
+ configure-libgrust
+ @[ -f ./libgrust/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing TAGS in libgrust"; \
+ (cd $(HOST_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ TAGS) \
+ || exit 1
+
+@endif libgrust
+
+.PHONY: maybe-install-info-libgrust install-info-libgrust
+maybe-install-info-libgrust:
+@if libgrust
+maybe-install-info-libgrust: install-info-libgrust
+
+install-info-libgrust: \
+ configure-libgrust \
+ info-libgrust
+ @[ -f ./libgrust/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing install-info in libgrust"; \
+ (cd $(HOST_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ install-info) \
+ || exit 1
+
+@endif libgrust
+
+.PHONY: maybe-install-dvi-libgrust install-dvi-libgrust
+maybe-install-dvi-libgrust:
+@if libgrust
+maybe-install-dvi-libgrust: install-dvi-libgrust
+
+install-dvi-libgrust: \
+ configure-libgrust \
+ dvi-libgrust
+ @[ -f ./libgrust/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing install-dvi in libgrust"; \
+ (cd $(HOST_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ install-dvi) \
+ || exit 1
+
+@endif libgrust
+
+.PHONY: maybe-install-pdf-libgrust install-pdf-libgrust
+maybe-install-pdf-libgrust:
+@if libgrust
+maybe-install-pdf-libgrust: install-pdf-libgrust
+
+install-pdf-libgrust: \
+ configure-libgrust \
+ pdf-libgrust
+ @[ -f ./libgrust/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing install-pdf in libgrust"; \
+ (cd $(HOST_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ install-pdf) \
+ || exit 1
+
+@endif libgrust
+
+.PHONY: maybe-install-html-libgrust install-html-libgrust
+maybe-install-html-libgrust:
+@if libgrust
+maybe-install-html-libgrust: install-html-libgrust
+
+install-html-libgrust: \
+ configure-libgrust \
+ html-libgrust
+ @[ -f ./libgrust/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing install-html in libgrust"; \
+ (cd $(HOST_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ install-html) \
+ || exit 1
+
+@endif libgrust
+
+.PHONY: maybe-installcheck-libgrust installcheck-libgrust
+maybe-installcheck-libgrust:
+@if libgrust
+maybe-installcheck-libgrust: installcheck-libgrust
+
+installcheck-libgrust: \
+ configure-libgrust
+ @[ -f ./libgrust/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing installcheck in libgrust"; \
+ (cd $(HOST_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ installcheck) \
+ || exit 1
+
+@endif libgrust
+
+.PHONY: maybe-mostlyclean-libgrust mostlyclean-libgrust
+maybe-mostlyclean-libgrust:
+@if libgrust
+maybe-mostlyclean-libgrust: mostlyclean-libgrust
+
+mostlyclean-libgrust:
+ @[ -f ./libgrust/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing mostlyclean in libgrust"; \
+ (cd $(HOST_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ mostlyclean) \
+ || exit 1
+
+@endif libgrust
+
+.PHONY: maybe-clean-libgrust clean-libgrust
+maybe-clean-libgrust:
+@if libgrust
+maybe-clean-libgrust: clean-libgrust
+
+clean-libgrust:
+ @[ -f ./libgrust/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing clean in libgrust"; \
+ (cd $(HOST_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ clean) \
+ || exit 1
+
+@endif libgrust
+
+.PHONY: maybe-distclean-libgrust distclean-libgrust
+maybe-distclean-libgrust:
+@if libgrust
+maybe-distclean-libgrust: distclean-libgrust
+
+distclean-libgrust:
+ @[ -f ./libgrust/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing distclean in libgrust"; \
+ (cd $(HOST_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ distclean) \
+ || exit 1
+
+@endif libgrust
+
+.PHONY: maybe-maintainer-clean-libgrust maintainer-clean-libgrust
+maybe-maintainer-clean-libgrust:
+@if libgrust
+maybe-maintainer-clean-libgrust: maintainer-clean-libgrust
+
+maintainer-clean-libgrust:
+ @[ -f ./libgrust/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing maintainer-clean in libgrust"; \
+ (cd $(HOST_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ maintainer-clean) \
+ || exit 1
+
+@endif libgrust
+
+
+
# ---------------------------------------
# Modules which run on the target machine
# ---------------------------------------
@@ -62156,6 +63337,491 @@ maintainer-clean-target-libatomic:
+
+
+.PHONY: configure-target-libgrust maybe-configure-target-libgrust
+maybe-configure-target-libgrust:
+@if gcc-bootstrap
+configure-target-libgrust: stage_current
+@endif gcc-bootstrap
+@if target-libgrust
+maybe-configure-target-libgrust: configure-target-libgrust
+configure-target-libgrust:
+ @: $(MAKE); $(unstage)
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ echo "Checking multilib configuration for libgrust..."; \
+ $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libgrust; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libgrust/multilib.tmp 2> /dev/null; \
+ if test -r $(TARGET_SUBDIR)/libgrust/multilib.out; then \
+ if cmp -s $(TARGET_SUBDIR)/libgrust/multilib.tmp $(TARGET_SUBDIR)/libgrust/multilib.out; then \
+ rm -f $(TARGET_SUBDIR)/libgrust/multilib.tmp; \
+ else \
+ rm -f $(TARGET_SUBDIR)/libgrust/Makefile; \
+ mv $(TARGET_SUBDIR)/libgrust/multilib.tmp $(TARGET_SUBDIR)/libgrust/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/libgrust/multilib.tmp $(TARGET_SUBDIR)/libgrust/multilib.out; \
+ fi; \
+ test ! -f $(TARGET_SUBDIR)/libgrust/Makefile || exit 0; \
+ $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libgrust; \
+ $(NORMAL_TARGET_EXPORTS) \
+ echo Configuring in $(TARGET_SUBDIR)/libgrust; \
+ cd "$(TARGET_SUBDIR)/libgrust" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
+ *) topdir=`echo $(TARGET_SUBDIR)/libgrust/ | \
+ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
+ esac; \
+ module_srcdir=libgrust; \
+ rm -f no-such-file || : ; \
+ CONFIG_SITE=no-such-file $(SHELL) \
+ $$s/$$module_srcdir/configure \
+ --srcdir=$${topdir}/$$module_srcdir \
+ $(TARGET_CONFIGARGS) --build=${build_alias} --host=${target_alias} \
+ --target=${target_alias} \
+ || exit 1
+@endif target-libgrust
+
+
+
+
+
+.PHONY: all-target-libgrust maybe-all-target-libgrust
+maybe-all-target-libgrust:
+@if gcc-bootstrap
+all-target-libgrust: stage_current
+@endif gcc-bootstrap
+@if target-libgrust
+TARGET-target-libgrust=all
+maybe-all-target-libgrust: all-target-libgrust
+all-target-libgrust: configure-target-libgrust
+ @: $(MAKE); $(unstage)
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(NORMAL_TARGET_EXPORTS) \
+ (cd $(TARGET_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS) \
+ $(TARGET-target-libgrust))
+@endif target-libgrust
+
+
+
+
+
+.PHONY: check-target-libgrust maybe-check-target-libgrust
+maybe-check-target-libgrust:
+@if target-libgrust
+maybe-check-target-libgrust: check-target-libgrust
+
+check-target-libgrust:
+ @: $(MAKE); $(unstage)
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(NORMAL_TARGET_EXPORTS) \
+ (cd $(TARGET_SUBDIR)/libgrust && \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check)
+
+@endif target-libgrust
+
+.PHONY: install-target-libgrust maybe-install-target-libgrust
+maybe-install-target-libgrust:
+@if target-libgrust
+maybe-install-target-libgrust: install-target-libgrust
+
+install-target-libgrust: installdirs
+ @: $(MAKE); $(unstage)
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(NORMAL_TARGET_EXPORTS) \
+ (cd $(TARGET_SUBDIR)/libgrust && \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install)
+
+@endif target-libgrust
+
+.PHONY: install-strip-target-libgrust maybe-install-strip-target-libgrust
+maybe-install-strip-target-libgrust:
+@if target-libgrust
+maybe-install-strip-target-libgrust: install-strip-target-libgrust
+
+install-strip-target-libgrust: installdirs
+ @: $(MAKE); $(unstage)
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(NORMAL_TARGET_EXPORTS) \
+ (cd $(TARGET_SUBDIR)/libgrust && \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install-strip)
+
+@endif target-libgrust
+
+# Other targets (info, dvi, pdf, etc.)
+
+.PHONY: maybe-info-target-libgrust info-target-libgrust
+maybe-info-target-libgrust:
+@if target-libgrust
+maybe-info-target-libgrust: info-target-libgrust
+
+info-target-libgrust: \
+ configure-target-libgrust
+ @: $(MAKE); $(unstage)
+ @[ -f $(TARGET_SUBDIR)/libgrust/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(NORMAL_TARGET_EXPORTS) \
+ echo "Doing info in $(TARGET_SUBDIR)/libgrust"; \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ (cd $(TARGET_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ info) \
+ || exit 1
+
+@endif target-libgrust
+
+.PHONY: maybe-dvi-target-libgrust dvi-target-libgrust
+maybe-dvi-target-libgrust:
+@if target-libgrust
+maybe-dvi-target-libgrust: dvi-target-libgrust
+
+dvi-target-libgrust: \
+ configure-target-libgrust
+ @: $(MAKE); $(unstage)
+ @[ -f $(TARGET_SUBDIR)/libgrust/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(NORMAL_TARGET_EXPORTS) \
+ echo "Doing dvi in $(TARGET_SUBDIR)/libgrust"; \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ (cd $(TARGET_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ dvi) \
+ || exit 1
+
+@endif target-libgrust
+
+.PHONY: maybe-pdf-target-libgrust pdf-target-libgrust
+maybe-pdf-target-libgrust:
+@if target-libgrust
+maybe-pdf-target-libgrust: pdf-target-libgrust
+
+pdf-target-libgrust: \
+ configure-target-libgrust
+ @: $(MAKE); $(unstage)
+ @[ -f $(TARGET_SUBDIR)/libgrust/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(NORMAL_TARGET_EXPORTS) \
+ echo "Doing pdf in $(TARGET_SUBDIR)/libgrust"; \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ (cd $(TARGET_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ pdf) \
+ || exit 1
+
+@endif target-libgrust
+
+.PHONY: maybe-html-target-libgrust html-target-libgrust
+maybe-html-target-libgrust:
+@if target-libgrust
+maybe-html-target-libgrust: html-target-libgrust
+
+html-target-libgrust: \
+ configure-target-libgrust
+ @: $(MAKE); $(unstage)
+ @[ -f $(TARGET_SUBDIR)/libgrust/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(NORMAL_TARGET_EXPORTS) \
+ echo "Doing html in $(TARGET_SUBDIR)/libgrust"; \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ (cd $(TARGET_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ html) \
+ || exit 1
+
+@endif target-libgrust
+
+.PHONY: maybe-TAGS-target-libgrust TAGS-target-libgrust
+maybe-TAGS-target-libgrust:
+@if target-libgrust
+maybe-TAGS-target-libgrust: TAGS-target-libgrust
+
+TAGS-target-libgrust: \
+ configure-target-libgrust
+ @: $(MAKE); $(unstage)
+ @[ -f $(TARGET_SUBDIR)/libgrust/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(NORMAL_TARGET_EXPORTS) \
+ echo "Doing TAGS in $(TARGET_SUBDIR)/libgrust"; \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ (cd $(TARGET_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ TAGS) \
+ || exit 1
+
+@endif target-libgrust
+
+.PHONY: maybe-install-info-target-libgrust install-info-target-libgrust
+maybe-install-info-target-libgrust:
+@if target-libgrust
+maybe-install-info-target-libgrust: install-info-target-libgrust
+
+install-info-target-libgrust: \
+ configure-target-libgrust \
+ info-target-libgrust
+ @: $(MAKE); $(unstage)
+ @[ -f $(TARGET_SUBDIR)/libgrust/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(NORMAL_TARGET_EXPORTS) \
+ echo "Doing install-info in $(TARGET_SUBDIR)/libgrust"; \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ (cd $(TARGET_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ install-info) \
+ || exit 1
+
+@endif target-libgrust
+
+.PHONY: maybe-install-dvi-target-libgrust install-dvi-target-libgrust
+maybe-install-dvi-target-libgrust:
+@if target-libgrust
+maybe-install-dvi-target-libgrust: install-dvi-target-libgrust
+
+install-dvi-target-libgrust: \
+ configure-target-libgrust \
+ dvi-target-libgrust
+ @: $(MAKE); $(unstage)
+ @[ -f $(TARGET_SUBDIR)/libgrust/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(NORMAL_TARGET_EXPORTS) \
+ echo "Doing install-dvi in $(TARGET_SUBDIR)/libgrust"; \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ (cd $(TARGET_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ install-dvi) \
+ || exit 1
+
+@endif target-libgrust
+
+.PHONY: maybe-install-pdf-target-libgrust install-pdf-target-libgrust
+maybe-install-pdf-target-libgrust:
+@if target-libgrust
+maybe-install-pdf-target-libgrust: install-pdf-target-libgrust
+
+install-pdf-target-libgrust: \
+ configure-target-libgrust \
+ pdf-target-libgrust
+ @: $(MAKE); $(unstage)
+ @[ -f $(TARGET_SUBDIR)/libgrust/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(NORMAL_TARGET_EXPORTS) \
+ echo "Doing install-pdf in $(TARGET_SUBDIR)/libgrust"; \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ (cd $(TARGET_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ install-pdf) \
+ || exit 1
+
+@endif target-libgrust
+
+.PHONY: maybe-install-html-target-libgrust install-html-target-libgrust
+maybe-install-html-target-libgrust:
+@if target-libgrust
+maybe-install-html-target-libgrust: install-html-target-libgrust
+
+install-html-target-libgrust: \
+ configure-target-libgrust \
+ html-target-libgrust
+ @: $(MAKE); $(unstage)
+ @[ -f $(TARGET_SUBDIR)/libgrust/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(NORMAL_TARGET_EXPORTS) \
+ echo "Doing install-html in $(TARGET_SUBDIR)/libgrust"; \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ (cd $(TARGET_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ install-html) \
+ || exit 1
+
+@endif target-libgrust
+
+.PHONY: maybe-installcheck-target-libgrust installcheck-target-libgrust
+maybe-installcheck-target-libgrust:
+@if target-libgrust
+maybe-installcheck-target-libgrust: installcheck-target-libgrust
+
+installcheck-target-libgrust: \
+ configure-target-libgrust
+ @: $(MAKE); $(unstage)
+ @[ -f $(TARGET_SUBDIR)/libgrust/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(NORMAL_TARGET_EXPORTS) \
+ echo "Doing installcheck in $(TARGET_SUBDIR)/libgrust"; \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ (cd $(TARGET_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ installcheck) \
+ || exit 1
+
+@endif target-libgrust
+
+.PHONY: maybe-mostlyclean-target-libgrust mostlyclean-target-libgrust
+maybe-mostlyclean-target-libgrust:
+@if target-libgrust
+maybe-mostlyclean-target-libgrust: mostlyclean-target-libgrust
+
+mostlyclean-target-libgrust:
+ @: $(MAKE); $(unstage)
+ @[ -f $(TARGET_SUBDIR)/libgrust/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(NORMAL_TARGET_EXPORTS) \
+ echo "Doing mostlyclean in $(TARGET_SUBDIR)/libgrust"; \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ (cd $(TARGET_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ mostlyclean) \
+ || exit 1
+
+@endif target-libgrust
+
+.PHONY: maybe-clean-target-libgrust clean-target-libgrust
+maybe-clean-target-libgrust:
+@if target-libgrust
+maybe-clean-target-libgrust: clean-target-libgrust
+
+clean-target-libgrust:
+ @: $(MAKE); $(unstage)
+ @[ -f $(TARGET_SUBDIR)/libgrust/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(NORMAL_TARGET_EXPORTS) \
+ echo "Doing clean in $(TARGET_SUBDIR)/libgrust"; \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ (cd $(TARGET_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ clean) \
+ || exit 1
+
+@endif target-libgrust
+
+.PHONY: maybe-distclean-target-libgrust distclean-target-libgrust
+maybe-distclean-target-libgrust:
+@if target-libgrust
+maybe-distclean-target-libgrust: distclean-target-libgrust
+
+distclean-target-libgrust:
+ @: $(MAKE); $(unstage)
+ @[ -f $(TARGET_SUBDIR)/libgrust/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(NORMAL_TARGET_EXPORTS) \
+ echo "Doing distclean in $(TARGET_SUBDIR)/libgrust"; \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ (cd $(TARGET_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ distclean) \
+ || exit 1
+
+@endif target-libgrust
+
+.PHONY: maybe-maintainer-clean-target-libgrust maintainer-clean-target-libgrust
+maybe-maintainer-clean-target-libgrust:
+@if target-libgrust
+maybe-maintainer-clean-target-libgrust: maintainer-clean-target-libgrust
+
+maintainer-clean-target-libgrust:
+ @: $(MAKE); $(unstage)
+ @[ -f $(TARGET_SUBDIR)/libgrust/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(NORMAL_TARGET_EXPORTS) \
+ echo "Doing maintainer-clean in $(TARGET_SUBDIR)/libgrust"; \
+ for flag in $(EXTRA_TARGET_FLAGS); do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ (cd $(TARGET_SUBDIR)/libgrust && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" "WINDMC=$${WINDMC}" \
+ maintainer-clean) \
+ || exit 1
+
+@endif target-libgrust
+
+
+
@if target-libgomp
.PHONY: check-target-libgomp-c++
check-target-libgomp-c++:
@@ -62474,6 +64140,11 @@ stage1-start::
mkdir stage1-libsframe; \
mv stage1-libsframe libsframe
@endif libsframe
+@if libgrust
+ @cd $(HOST_SUBDIR); [ -d stage1-libgrust ] || \
+ mkdir stage1-libgrust; \
+ mv stage1-libgrust libgrust
+@endif libgrust
@[ -d stage1-$(TARGET_SUBDIR) ] || \
mkdir stage1-$(TARGET_SUBDIR); \
mv stage1-$(TARGET_SUBDIR) $(TARGET_SUBDIR)
@@ -62599,6 +64270,11 @@ stage1-end::
cd $(HOST_SUBDIR); mv libsframe stage1-libsframe; \
fi
@endif libsframe
+@if libgrust
+ @if test -d $(HOST_SUBDIR)/libgrust; then \
+ cd $(HOST_SUBDIR); mv libgrust stage1-libgrust; \
+ fi
+@endif libgrust
@if test -d $(TARGET_SUBDIR); then \
mv $(TARGET_SUBDIR) stage1-$(TARGET_SUBDIR); \
fi
@@ -62791,6 +64467,12 @@ stage2-start::
mv stage2-libsframe libsframe; \
mv stage1-libsframe prev-libsframe || test -f stage1-lean
@endif libsframe
+@if libgrust
+ @cd $(HOST_SUBDIR); [ -d stage2-libgrust ] || \
+ mkdir stage2-libgrust; \
+ mv stage2-libgrust libgrust; \
+ mv stage1-libgrust prev-libgrust || test -f stage1-lean
+@endif libgrust
@[ -d stage2-$(TARGET_SUBDIR) ] || \
mkdir stage2-$(TARGET_SUBDIR); \
mv stage2-$(TARGET_SUBDIR) $(TARGET_SUBDIR); \
@@ -62941,6 +64623,12 @@ stage2-end::
mv prev-libsframe stage1-libsframe; : ; \
fi
@endif libsframe
+@if libgrust
+ @if test -d $(HOST_SUBDIR)/libgrust; then \
+ cd $(HOST_SUBDIR); mv libgrust stage2-libgrust; \
+ mv prev-libgrust stage1-libgrust; : ; \
+ fi
+@endif libgrust
@if test -d $(TARGET_SUBDIR); then \
mv $(TARGET_SUBDIR) stage2-$(TARGET_SUBDIR); \
mv prev-$(TARGET_SUBDIR) stage1-$(TARGET_SUBDIR); : ; \
@@ -63157,6 +64845,12 @@ stage3-start::
mv stage3-libsframe libsframe; \
mv stage2-libsframe prev-libsframe || test -f stage2-lean
@endif libsframe
+@if libgrust
+ @cd $(HOST_SUBDIR); [ -d stage3-libgrust ] || \
+ mkdir stage3-libgrust; \
+ mv stage3-libgrust libgrust; \
+ mv stage2-libgrust prev-libgrust || test -f stage2-lean
+@endif libgrust
@[ -d stage3-$(TARGET_SUBDIR) ] || \
mkdir stage3-$(TARGET_SUBDIR); \
mv stage3-$(TARGET_SUBDIR) $(TARGET_SUBDIR); \
@@ -63307,6 +65001,12 @@ stage3-end::
mv prev-libsframe stage2-libsframe; : ; \
fi
@endif libsframe
+@if libgrust
+ @if test -d $(HOST_SUBDIR)/libgrust; then \
+ cd $(HOST_SUBDIR); mv libgrust stage3-libgrust; \
+ mv prev-libgrust stage2-libgrust; : ; \
+ fi
+@endif libgrust
@if test -d $(TARGET_SUBDIR); then \
mv $(TARGET_SUBDIR) stage3-$(TARGET_SUBDIR); \
mv prev-$(TARGET_SUBDIR) stage2-$(TARGET_SUBDIR); : ; \
@@ -63579,6 +65279,12 @@ stage4-start::
mv stage4-libsframe libsframe; \
mv stage3-libsframe prev-libsframe || test -f stage3-lean
@endif libsframe
+@if libgrust
+ @cd $(HOST_SUBDIR); [ -d stage4-libgrust ] || \
+ mkdir stage4-libgrust; \
+ mv stage4-libgrust libgrust; \
+ mv stage3-libgrust prev-libgrust || test -f stage3-lean
+@endif libgrust
@[ -d stage4-$(TARGET_SUBDIR) ] || \
mkdir stage4-$(TARGET_SUBDIR); \
mv stage4-$(TARGET_SUBDIR) $(TARGET_SUBDIR); \
@@ -63729,6 +65435,12 @@ stage4-end::
mv prev-libsframe stage3-libsframe; : ; \
fi
@endif libsframe
+@if libgrust
+ @if test -d $(HOST_SUBDIR)/libgrust; then \
+ cd $(HOST_SUBDIR); mv libgrust stage4-libgrust; \
+ mv prev-libgrust stage3-libgrust; : ; \
+ fi
+@endif libgrust
@if test -d $(TARGET_SUBDIR); then \
mv $(TARGET_SUBDIR) stage4-$(TARGET_SUBDIR); \
mv prev-$(TARGET_SUBDIR) stage3-$(TARGET_SUBDIR); : ; \
@@ -63989,6 +65701,12 @@ stageprofile-start::
mv stageprofile-libsframe libsframe; \
mv stage1-libsframe prev-libsframe || test -f stage1-lean
@endif libsframe
+@if libgrust
+ @cd $(HOST_SUBDIR); [ -d stageprofile-libgrust ] || \
+ mkdir stageprofile-libgrust; \
+ mv stageprofile-libgrust libgrust; \
+ mv stage1-libgrust prev-libgrust || test -f stage1-lean
+@endif libgrust
@[ -d stageprofile-$(TARGET_SUBDIR) ] || \
mkdir stageprofile-$(TARGET_SUBDIR); \
mv stageprofile-$(TARGET_SUBDIR) $(TARGET_SUBDIR); \
@@ -64139,6 +65857,12 @@ stageprofile-end::
mv prev-libsframe stage1-libsframe; : ; \
fi
@endif libsframe
+@if libgrust
+ @if test -d $(HOST_SUBDIR)/libgrust; then \
+ cd $(HOST_SUBDIR); mv libgrust stageprofile-libgrust; \
+ mv prev-libgrust stage1-libgrust; : ; \
+ fi
+@endif libgrust
@if test -d $(TARGET_SUBDIR); then \
mv $(TARGET_SUBDIR) stageprofile-$(TARGET_SUBDIR); \
mv prev-$(TARGET_SUBDIR) stage1-$(TARGET_SUBDIR); : ; \
@@ -64332,6 +66056,12 @@ stagetrain-start::
mv stagetrain-libsframe libsframe; \
mv stageprofile-libsframe prev-libsframe || test -f stageprofile-lean
@endif libsframe
+@if libgrust
+ @cd $(HOST_SUBDIR); [ -d stagetrain-libgrust ] || \
+ mkdir stagetrain-libgrust; \
+ mv stagetrain-libgrust libgrust; \
+ mv stageprofile-libgrust prev-libgrust || test -f stageprofile-lean
+@endif libgrust
@[ -d stagetrain-$(TARGET_SUBDIR) ] || \
mkdir stagetrain-$(TARGET_SUBDIR); \
mv stagetrain-$(TARGET_SUBDIR) $(TARGET_SUBDIR); \
@@ -64482,6 +66212,12 @@ stagetrain-end::
mv prev-libsframe stageprofile-libsframe; : ; \
fi
@endif libsframe
+@if libgrust
+ @if test -d $(HOST_SUBDIR)/libgrust; then \
+ cd $(HOST_SUBDIR); mv libgrust stagetrain-libgrust; \
+ mv prev-libgrust stageprofile-libgrust; : ; \
+ fi
+@endif libgrust
@if test -d $(TARGET_SUBDIR); then \
mv $(TARGET_SUBDIR) stagetrain-$(TARGET_SUBDIR); \
mv prev-$(TARGET_SUBDIR) stageprofile-$(TARGET_SUBDIR); : ; \
@@ -64675,6 +66411,12 @@ stagefeedback-start::
mv stagefeedback-libsframe libsframe; \
mv stagetrain-libsframe prev-libsframe || test -f stagetrain-lean
@endif libsframe
+@if libgrust
+ @cd $(HOST_SUBDIR); [ -d stagefeedback-libgrust ] || \
+ mkdir stagefeedback-libgrust; \
+ mv stagefeedback-libgrust libgrust; \
+ mv stagetrain-libgrust prev-libgrust || test -f stagetrain-lean
+@endif libgrust
@[ -d stagefeedback-$(TARGET_SUBDIR) ] || \
mkdir stagefeedback-$(TARGET_SUBDIR); \
mv stagefeedback-$(TARGET_SUBDIR) $(TARGET_SUBDIR); \
@@ -64825,6 +66567,12 @@ stagefeedback-end::
mv prev-libsframe stagetrain-libsframe; : ; \
fi
@endif libsframe
+@if libgrust
+ @if test -d $(HOST_SUBDIR)/libgrust; then \
+ cd $(HOST_SUBDIR); mv libgrust stagefeedback-libgrust; \
+ mv prev-libgrust stagetrain-libgrust; : ; \
+ fi
+@endif libgrust
@if test -d $(TARGET_SUBDIR); then \
mv $(TARGET_SUBDIR) stagefeedback-$(TARGET_SUBDIR); \
mv prev-$(TARGET_SUBDIR) stagetrain-$(TARGET_SUBDIR); : ; \
@@ -65041,6 +66789,12 @@ stageautoprofile-start::
mv stageautoprofile-libsframe libsframe; \
mv stage1-libsframe prev-libsframe || test -f stage1-lean
@endif libsframe
+@if libgrust
+ @cd $(HOST_SUBDIR); [ -d stageautoprofile-libgrust ] || \
+ mkdir stageautoprofile-libgrust; \
+ mv stageautoprofile-libgrust libgrust; \
+ mv stage1-libgrust prev-libgrust || test -f stage1-lean
+@endif libgrust
@[ -d stageautoprofile-$(TARGET_SUBDIR) ] || \
mkdir stageautoprofile-$(TARGET_SUBDIR); \
mv stageautoprofile-$(TARGET_SUBDIR) $(TARGET_SUBDIR); \
@@ -65191,6 +66945,12 @@ stageautoprofile-end::
mv prev-libsframe stage1-libsframe; : ; \
fi
@endif libsframe
+@if libgrust
+ @if test -d $(HOST_SUBDIR)/libgrust; then \
+ cd $(HOST_SUBDIR); mv libgrust stageautoprofile-libgrust; \
+ mv prev-libgrust stage1-libgrust; : ; \
+ fi
+@endif libgrust
@if test -d $(TARGET_SUBDIR); then \
mv $(TARGET_SUBDIR) stageautoprofile-$(TARGET_SUBDIR); \
mv prev-$(TARGET_SUBDIR) stage1-$(TARGET_SUBDIR); : ; \
@@ -65384,6 +67144,12 @@ stageautofeedback-start::
mv stageautofeedback-libsframe libsframe; \
mv stageautoprofile-libsframe prev-libsframe || test -f stageautoprofile-lean
@endif libsframe
+@if libgrust
+ @cd $(HOST_SUBDIR); [ -d stageautofeedback-libgrust ] || \
+ mkdir stageautofeedback-libgrust; \
+ mv stageautofeedback-libgrust libgrust; \
+ mv stageautoprofile-libgrust prev-libgrust || test -f stageautoprofile-lean
+@endif libgrust
@[ -d stageautofeedback-$(TARGET_SUBDIR) ] || \
mkdir stageautofeedback-$(TARGET_SUBDIR); \
mv stageautofeedback-$(TARGET_SUBDIR) $(TARGET_SUBDIR); \
@@ -65534,6 +67300,12 @@ stageautofeedback-end::
mv prev-libsframe stageautoprofile-libsframe; : ; \
fi
@endif libsframe
+@if libgrust
+ @if test -d $(HOST_SUBDIR)/libgrust; then \
+ cd $(HOST_SUBDIR); mv libgrust stageautofeedback-libgrust; \
+ mv prev-libgrust stageautoprofile-libgrust; : ; \
+ fi
+@endif libgrust
@if test -d $(TARGET_SUBDIR); then \
mv $(TARGET_SUBDIR) stageautofeedback-$(TARGET_SUBDIR); \
mv prev-$(TARGET_SUBDIR) stageautoprofile-$(TARGET_SUBDIR); : ; \
@@ -65736,6 +67508,7 @@ configure-stagetrain-target-libatomic: maybe-all-stagetrain-gcc
configure-stagefeedback-target-libatomic: maybe-all-stagefeedback-gcc
configure-stageautoprofile-target-libatomic: maybe-all-stageautoprofile-gcc
configure-stageautofeedback-target-libatomic: maybe-all-stageautofeedback-gcc
+configure-target-libgrust: stage_last
@endif gcc-bootstrap
@if gcc-no-bootstrap
@@ -65762,6 +67535,7 @@ configure-target-libgm2: maybe-all-gcc
configure-target-libgomp: maybe-all-gcc
configure-target-libitm: maybe-all-gcc
configure-target-libatomic: maybe-all-gcc
+configure-target-libgrust: maybe-all-gcc
@endif gcc-no-bootstrap
@@ -65910,6 +67684,16 @@ all-stagetrain-gcc: all-stagetrain-libiberty
all-stagefeedback-gcc: all-stagefeedback-libiberty
all-stageautoprofile-gcc: all-stageautoprofile-libiberty
all-stageautofeedback-gcc: all-stageautofeedback-libiberty
+all-gcc: maybe-all-libgrust
+all-stage1-gcc: maybe-all-stage1-libgrust
+all-stage2-gcc: maybe-all-stage2-libgrust
+all-stage3-gcc: maybe-all-stage3-libgrust
+all-stage4-gcc: maybe-all-stage4-libgrust
+all-stageprofile-gcc: maybe-all-stageprofile-libgrust
+all-stagetrain-gcc: maybe-all-stagetrain-libgrust
+all-stagefeedback-gcc: maybe-all-stagefeedback-libgrust
+all-stageautoprofile-gcc: maybe-all-stageautoprofile-libgrust
+all-stageautofeedback-gcc: maybe-all-stageautofeedback-libgrust
all-gcc: maybe-all-intl
all-stage1-gcc: maybe-all-stage1-intl
all-stage2-gcc: maybe-all-stage2-intl
@@ -67179,6 +68963,7 @@ configure-target-libgm2: maybe-all-target-libgcc
configure-target-libgomp: maybe-all-target-libgcc
configure-target-libitm: maybe-all-target-libgcc
configure-target-libatomic: maybe-all-target-libgcc
+configure-target-libgrust: maybe-all-target-libgcc
@endif gcc-no-bootstrap
@@ -67227,6 +69012,8 @@ configure-target-libitm: maybe-all-target-libstdc++-v3
configure-target-libatomic: maybe-all-target-newlib maybe-all-target-libgloss
+configure-target-libgrust: maybe-all-target-newlib maybe-all-target-libgloss
+
CONFIGURE_GDB_TK = @CONFIGURE_GDB_TK@
GDB_TK = @GDB_TK@
diff --git a/configure b/configure
index 8fc163d36bd..9f897d005c4 100755
--- a/configure
+++ b/configure
@@ -2829,7 +2829,7 @@ build_tools="build-texinfo build-flex build-bison build-m4 build-fixincludes"
# these libraries are used by various programs built for the host environment
#f
-host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libbacktrace libcpp libcody libdecnumber gmp mpfr mpc isl libiconv libctf libsframe"
+host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libbacktrace libcpp libcody libdecnumber gmp mpfr mpc isl libiconv libctf libsframe libgrust "
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
@@ -2860,6 +2860,7 @@ target_libraries="target-libgcc \
target-libada \
target-libgm2 \
target-libgo \
+ target-libgrust \
target-libphobos \
target-zlib"
diff --git a/libgm2/Makefile.in b/libgm2/Makefile.in
index 0900c027faa..67c16bc8f42 100644
--- a/libgm2/Makefile.in
+++ b/libgm2/Makefile.in
@@ -90,15 +90,15 @@ host_triplet = @host@
target_triplet = @target@
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/../libtool.m4 \
- $(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
- $(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
- $(top_srcdir)/../config/acx.m4 \
+am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
$(top_srcdir)/../config/depstand.m4 \
$(top_srcdir)/../config/lead-dot.m4 \
$(top_srcdir)/../config/multi.m4 \
$(top_srcdir)/../config/no-executables.m4 \
- $(top_srcdir)/../config/override.m4 $(top_srcdir)/configure.ac
+ $(top_srcdir)/../config/override.m4 \
+ $(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \
+ $(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
+ $(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
diff --git a/libgm2/aclocal.m4 b/libgm2/aclocal.m4
index c352303012d..832065fbb9b 100644
--- a/libgm2/aclocal.m4
+++ b/libgm2/aclocal.m4
@@ -1187,14 +1187,14 @@ AC_SUBST([am__tar])
AC_SUBST([am__untar])
]) # _AM_PROG_TAR
-m4_include([../libtool.m4])
-m4_include([../ltoptions.m4])
-m4_include([../ltsugar.m4])
-m4_include([../ltversion.m4])
-m4_include([../lt~obsolete.m4])
m4_include([../config/acx.m4])
m4_include([../config/depstand.m4])
m4_include([../config/lead-dot.m4])
m4_include([../config/multi.m4])
m4_include([../config/no-executables.m4])
m4_include([../config/override.m4])
+m4_include([../libtool.m4])
+m4_include([../ltoptions.m4])
+m4_include([../ltsugar.m4])
+m4_include([../ltversion.m4])
+m4_include([../lt~obsolete.m4])
diff --git a/libgm2/libm2cor/Makefile.in b/libgm2/libm2cor/Makefile.in
index eaf980e3c48..93a7d735904 100644
--- a/libgm2/libm2cor/Makefile.in
+++ b/libgm2/libm2cor/Makefile.in
@@ -107,15 +107,15 @@ host_triplet = @host@
target_triplet = @target@
subdir = libm2cor
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/../libtool.m4 \
- $(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
- $(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
- $(top_srcdir)/../config/acx.m4 \
+am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
$(top_srcdir)/../config/depstand.m4 \
$(top_srcdir)/../config/lead-dot.m4 \
$(top_srcdir)/../config/multi.m4 \
$(top_srcdir)/../config/no-executables.m4 \
- $(top_srcdir)/../config/override.m4 $(top_srcdir)/configure.ac
+ $(top_srcdir)/../config/override.m4 \
+ $(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \
+ $(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
+ $(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am
diff --git a/libgm2/libm2iso/Makefile.in b/libgm2/libm2iso/Makefile.in
index b150c691946..bcddf1e7186 100644
--- a/libgm2/libm2iso/Makefile.in
+++ b/libgm2/libm2iso/Makefile.in
@@ -107,15 +107,15 @@ host_triplet = @host@
target_triplet = @target@
subdir = libm2iso
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/../libtool.m4 \
- $(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
- $(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
- $(top_srcdir)/../config/acx.m4 \
+am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
$(top_srcdir)/../config/depstand.m4 \
$(top_srcdir)/../config/lead-dot.m4 \
$(top_srcdir)/../config/multi.m4 \
$(top_srcdir)/../config/no-executables.m4 \
- $(top_srcdir)/../config/override.m4 $(top_srcdir)/configure.ac
+ $(top_srcdir)/../config/override.m4 \
+ $(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \
+ $(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
+ $(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am
diff --git a/libgm2/libm2log/Makefile.in b/libgm2/libm2log/Makefile.in
index 4e5580d6393..cfd67a5dfcb 100644
--- a/libgm2/libm2log/Makefile.in
+++ b/libgm2/libm2log/Makefile.in
@@ -107,15 +107,15 @@ host_triplet = @host@
target_triplet = @target@
subdir = libm2log
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/../libtool.m4 \
- $(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
- $(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
- $(top_srcdir)/../config/acx.m4 \
+am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
$(top_srcdir)/../config/depstand.m4 \
$(top_srcdir)/../config/lead-dot.m4 \
$(top_srcdir)/../config/multi.m4 \
$(top_srcdir)/../config/no-executables.m4 \
- $(top_srcdir)/../config/override.m4 $(top_srcdir)/configure.ac
+ $(top_srcdir)/../config/override.m4 \
+ $(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \
+ $(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
+ $(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am
diff --git a/libgm2/libm2min/Makefile.in b/libgm2/libm2min/Makefile.in
index 790cfb3cb0f..9104153a91e 100644
--- a/libgm2/libm2min/Makefile.in
+++ b/libgm2/libm2min/Makefile.in
@@ -107,15 +107,15 @@ host_triplet = @host@
target_triplet = @target@
subdir = libm2min
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/../libtool.m4 \
- $(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
- $(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
- $(top_srcdir)/../config/acx.m4 \
+am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
$(top_srcdir)/../config/depstand.m4 \
$(top_srcdir)/../config/lead-dot.m4 \
$(top_srcdir)/../config/multi.m4 \
$(top_srcdir)/../config/no-executables.m4 \
- $(top_srcdir)/../config/override.m4 $(top_srcdir)/configure.ac
+ $(top_srcdir)/../config/override.m4 \
+ $(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \
+ $(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
+ $(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am
diff --git a/libgm2/libm2pim/Makefile.in b/libgm2/libm2pim/Makefile.in
index 5fc026ebcb2..cebb2c3cf31 100644
--- a/libgm2/libm2pim/Makefile.in
+++ b/libgm2/libm2pim/Makefile.in
@@ -107,15 +107,15 @@ host_triplet = @host@
target_triplet = @target@
subdir = libm2pim
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/../libtool.m4 \
- $(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
- $(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
- $(top_srcdir)/../config/acx.m4 \
+am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
$(top_srcdir)/../config/depstand.m4 \
$(top_srcdir)/../config/lead-dot.m4 \
$(top_srcdir)/../config/multi.m4 \
$(top_srcdir)/../config/no-executables.m4 \
- $(top_srcdir)/../config/override.m4 $(top_srcdir)/configure.ac
+ $(top_srcdir)/../config/override.m4 \
+ $(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \
+ $(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
+ $(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am
diff --git a/libgrust/Makefile.in b/libgrust/Makefile.in
new file mode 100644
index 00000000000..bc9b6cc227a
--- /dev/null
+++ b/libgrust/Makefile.in
@@ -0,0 +1,671 @@
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+target_triplet = @target@
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
+ $(top_srcdir)/../config/depstand.m4 \
+ $(top_srcdir)/../config/lead-dot.m4 \
+ $(top_srcdir)/../config/no-executables.m4 \
+ $(top_srcdir)/../config/override.m4 \
+ $(top_srcdir)/../config/toolexeclibdir.m4 \
+ $(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \
+ $(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
+ $(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+ $(am__configure_deps)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
+SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+ ctags-recursive dvi-recursive html-recursive info-recursive \
+ install-data-recursive install-dvi-recursive \
+ install-exec-recursive install-html-recursive \
+ install-info-recursive install-pdf-recursive \
+ install-ps-recursive install-recursive installcheck-recursive \
+ installdirs-recursive pdf-recursive ps-recursive \
+ tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+ $(RECURSIVE_TARGETS) \
+ $(RECURSIVE_CLEAN_TARGETS) \
+ $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+ cscope
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+CSCOPE = cscope
+DIST_SUBDIRS = $(SUBDIRS)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCAS = @CCAS@
+CCASDEPMODE = @CCASDEPMODE@
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_libsubdir = @build_libsubdir@
+build_os = @build_os@
+build_subdir = @build_subdir@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_noncanonical = @host_noncanonical@
+host_os = @host_os@
+host_subdir = @host_subdir@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_noncanonical = @target_noncanonical@
+target_os = @target_os@
+target_subdir = @target_subdir@
+target_vendor = @target_vendor@
+toolexecdir = @toolexecdir@
+toolexeclibdir = @toolexeclibdir@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = 1.8 foreign
+SUFFIXES = .c .rs .def .o .lo .a
+ACLOCAL_AMFLAGS = -I . -I .. -I ../config
+AM_CFLAGS = -I $(srcdir)/../libgcc -I $(MULTIBUILDTOP)../../gcc/include
+TOP_GCCDIR := $(shell cd $(top_srcdir) && cd .. && pwd)
+GCC_DIR = $(TOP_GCCDIR)/gcc
+RUST_SRC = $(GCC_DIR)/rust
+SUBDIRS = libproc_macro
+RUST_BUILDDIR := $(shell pwd)
+
+# Work around what appears to be a GNU make bug handling MAKEFLAGS
+# values defined in terms of make variables, as is the case for CC and
+# friends when we are called from the top level Makefile.
+AM_MAKEFLAGS = \
+ "GCC_DIR=$(GCC_DIR)" \
+ "RUST_SRC=$(RUST_SRC)" \
+ "AR_FLAGS=$(AR_FLAGS)" \
+ "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
+ "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
+ "RUST_FOR_TARGET=$(RUST_FOR_TARGET)" \
+ "CFLAGS=$(CFLAGS)" \
+ "CXXFLAGS=$(CXXFLAGS)" \
+ "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
+ "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
+ "INSTALL=$(INSTALL)" \
+ "INSTALL_DATA=$(INSTALL_DATA)" \
+ "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
+ "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
+ "LDFLAGS=$(LDFLAGS)" \
+ "LIBCFLAGS=$(LIBCFLAGS)" \
+ "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
+ "MAKE=$(MAKE)" \
+ "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
+ "PICFLAG=$(PICFLAG)" \
+ "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
+ "SHELL=$(SHELL)" \
+ "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
+ "exec_prefix=$(exec_prefix)" \
+ "infodir=$(infodir)" \
+ "libdir=$(libdir)" \
+ "includedir=$(includedir)" \
+ "prefix=$(prefix)" \
+ "tooldir=$(tooldir)" \
+ "gxx_include_dir=$(gxx_include_dir)" \
+ "AR=$(AR)" \
+ "AS=$(AS)" \
+ "LD=$(LD)" \
+ "RANLIB=$(RANLIB)" \
+ "NM=$(NM)" \
+ "NM_FOR_BUILD=$(NM_FOR_BUILD)" \
+ "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
+ "DESTDIR=$(DESTDIR)" \
+ "WERROR=$(WERROR)" \
+ "TARGET_LIB_PATH=$(TARGET_LIB_PATH)" \
+ "TARGET_LIB_PATH_librust=$(TARGET_LIB_PATH_librust)" \
+ "LIBTOOL=$(RUST_BUILDDIR)/libtool"
+
+MULTISRCTOP =
+MULTIBUILDTOP =
+MULTIDIRS =
+MULTISUBDIR =
+MULTIDO = true
+MULTICLEAN = true
+all: all-recursive
+
+.SUFFIXES:
+.SUFFIXES: .c .rs .def .o .lo .a
+am--refresh: Makefile
+ @:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/../multilib.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ esac;
+$(top_srcdir)/../multilib.am $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ $(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+distclean-libtool:
+ -rm -f libtool config.lt
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+# (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+ @fail=; \
+ if $(am__make_keepgoing); then \
+ failcom='fail=yes'; \
+ else \
+ failcom='exit 1'; \
+ fi; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ set x; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ $(am__define_uniq_tagged_files); \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+ test ! -s cscope.files \
+ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+ -rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+ -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
+check-am: all-am
+check: check-recursive
+all-am: Makefile all-local
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool \
+ distclean-local distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am: install-exec-local
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic \
+ maintainer-clean-local
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool \
+ mostlyclean-local
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(am__recursive_targets) install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
+ am--refresh check check-am clean clean-cscope clean-generic \
+ clean-libtool clean-local cscope cscopelist-am ctags ctags-am \
+ distclean distclean-generic distclean-libtool distclean-local \
+ distclean-tags dvi dvi-am html html-am info info-am install \
+ install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-exec-local \
+ install-html install-html-am install-info install-info-am \
+ install-man install-pdf install-pdf-am install-ps \
+ install-ps-am install-strip installcheck installcheck-am \
+ installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-local mostlyclean \
+ mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
+ pdf-am ps ps-am tags tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+# GNU Make needs to see an explicit $(MAKE) variable in the command it
+# runs to enable its job server during parallel builds. Hence the
+# comments below.
+all-multi:
+ $(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE)
+install-multi:
+ $(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE)
+mostlyclean-multi:
+ $(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE)
+clean-multi:
+ $(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE)
+distclean-multi:
+ $(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE)
+maintainer-clean-multi:
+ $(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE)
+
+.MAKE .PHONY: all-multi clean-multi distclean-multi install-am \
+ install-multi maintainer-clean-multi mostlyclean-multi
+
+install-exec-local: install-multi
+
+all-local: all-multi
+mostlyclean-local: mostlyclean-multi
+clean-local: clean-multi
+distclean-local: distclean-multi
+maintainer-clean-local: maintainer-clean-multi
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/libgrust/aclocal.m4 b/libgrust/aclocal.m4
new file mode 100644
index 00000000000..1bd42c34d74
--- /dev/null
+++ b/libgrust/aclocal.m4
@@ -0,0 +1,1260 @@
+# generated automatically by aclocal 1.15.1 -*- Autoconf -*-
+
+# Copyright (C) 1996-2017 Free Software Foundation, Inc.
+
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
+[m4_warning([this file was generated for autoconf 2.69.
+You have another version of autoconf. It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically 'autoreconf'.])])
+
+# Copyright (C) 2002-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.15'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version. Point them to the right macro.
+m4_if([$1], [1.15.1], [],
+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too. Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.15.1])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# Copyright (C) 2011-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_AR([ACT-IF-FAIL])
+# -------------------------
+# Try to determine the archiver interface, and trigger the ar-lib wrapper
+# if it is needed. If the detection of archiver interface fails, run
+# ACT-IF-FAIL (default is to abort configure with a proper error message).
+AC_DEFUN([AM_PROG_AR],
+[AC_BEFORE([$0], [LT_INIT])dnl
+AC_BEFORE([$0], [AC_PROG_LIBTOOL])dnl
+AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([ar-lib])dnl
+AC_CHECK_TOOLS([AR], [ar lib "link -lib"], [false])
+: ${AR=ar}
+
+AC_CACHE_CHECK([the archiver ($AR) interface], [am_cv_ar_interface],
+ [AC_LANG_PUSH([C])
+ am_cv_ar_interface=ar
+ AC_COMPILE_IFELSE([AC_LANG_SOURCE([[int some_variable = 0;]])],
+ [am_ar_try='$AR cru libconftest.a conftest.$ac_objext >&AS_MESSAGE_LOG_FD'
+ AC_TRY_EVAL([am_ar_try])
+ if test "$ac_status" -eq 0; then
+ am_cv_ar_interface=ar
+ else
+ am_ar_try='$AR -NOLOGO -OUT:conftest.lib conftest.$ac_objext >&AS_MESSAGE_LOG_FD'
+ AC_TRY_EVAL([am_ar_try])
+ if test "$ac_status" -eq 0; then
+ am_cv_ar_interface=lib
+ else
+ am_cv_ar_interface=unknown
+ fi
+ fi
+ rm -f conftest.lib libconftest.a
+ ])
+ AC_LANG_POP([C])])
+
+case $am_cv_ar_interface in
+ar)
+ ;;
+lib)
+ # Microsoft lib, so override with the ar-lib wrapper script.
+ # FIXME: It is wrong to rewrite AR.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__AR in this case,
+ # and then we could set am__AR="$am_aux_dir/ar-lib \$(AR)" or something
+ # similar.
+ AR="$am_aux_dir/ar-lib $AR"
+ ;;
+unknown)
+ m4_default([$1],
+ [AC_MSG_ERROR([could not determine $AR interface])])
+ ;;
+esac
+AC_SUBST([AR])dnl
+])
+
+# Figure out how to run the assembler. -*- Autoconf -*-
+
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_AS
+# ----------
+AC_DEFUN([AM_PROG_AS],
+[# By default we simply use the C compiler to build assembly code.
+AC_REQUIRE([AC_PROG_CC])
+test "${CCAS+set}" = set || CCAS=$CC
+test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS
+AC_ARG_VAR([CCAS], [assembler compiler command (defaults to CC)])
+AC_ARG_VAR([CCASFLAGS], [assembler compiler flags (defaults to CFLAGS)])
+_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES([CCAS])])dnl
+])
+
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to
+# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is '.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright (C) 1997-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ([2.52])dnl
+ m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+
+# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+m4_if([$1], [CC], [depcc="$CC" am_compiler_list=],
+ [$1], [CXX], [depcc="$CXX" am_compiler_list=],
+ [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
+ [$1], [UPC], [depcc="$UPC" am_compiler_list=],
+ [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ am__universal=false
+ m4_case([$1], [CC],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac],
+ [CXX],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac])
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok '-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE([dependency-tracking], [dnl
+AS_HELP_STRING(
+ [--enable-dependency-tracking],
+ [do not reject slow dependency extractors])
+AS_HELP_STRING(
+ [--disable-dependency-tracking],
+ [speeds up one-time build])])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+ am__nodep='_no'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+AC_SUBST([am__nodep])dnl
+_AM_SUBST_NOTMAKE([am__nodep])dnl
+])
+
+# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+# Copyright (C) 1999-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+ # Older Autoconf quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named 'Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running 'make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "$am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+ done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each '.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake. -*- Autoconf -*-
+
+# Copyright (C) 1996-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This macro actually does too much. Some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
+m4_define([AC_PROG_CC],
+m4_defn([AC_PROG_CC])
+[_AM_PROG_CC_C_O
+])
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.65])dnl
+dnl Autoconf wants to disallow AM_ names. We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[AC_DIAGNOSE([obsolete],
+ [$0: two- and three-arguments forms are deprecated.])
+m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(
+ m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
+ [ok:ok],,
+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
+ AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
+AM_MISSING_PROG([AUTOCONF], [autoconf])
+AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
+AM_MISSING_PROG([AUTOHEADER], [autoheader])
+AM_MISSING_PROG([MAKEINFO], [makeinfo])
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+# For better backward compatibility. To be removed once Automake 1.9.x
+# dies out for good. For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
+# We need awk for the "check" target (and possibly the TAP driver). The
+# system "awk" is bad on some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES([CC])],
+ [m4_define([AC_PROG_CC],
+ m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES([CXX])],
+ [m4_define([AC_PROG_CXX],
+ m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+ [_AM_DEPENDENCIES([OBJC])],
+ [m4_define([AC_PROG_OBJC],
+ m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
+ [_AM_DEPENDENCIES([OBJCXX])],
+ [m4_define([AC_PROG_OBJCXX],
+ m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
+])
+AC_REQUIRE([AM_SILENT_RULES])dnl
+dnl The testsuite driver may need to know about EXEEXT, so add the
+dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This
+dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
+ fi
+fi
+dnl The trailing newline in this macro's definition is deliberate, for
+dnl backward compatibility and to allow trailing 'dnl'-style comments
+dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
+])
+
+dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+AC_SUBST([install_sh])])
+
+# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
+# From Jim Meyering
+
+# Copyright (C) 1996-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MAINTAINER_MODE([DEFAULT-MODE])
+# ----------------------------------
+# Control maintainer-specific portions of Makefiles.
+# Default is to disable them, unless 'enable' is passed literally.
+# For symmetry, 'disable' may be passed as well. Anyway, the user
+# can override the default with the --enable/--disable switch.
+AC_DEFUN([AM_MAINTAINER_MODE],
+[m4_case(m4_default([$1], [disable]),
+ [enable], [m4_define([am_maintainer_other], [disable])],
+ [disable], [m4_define([am_maintainer_other], [enable])],
+ [m4_define([am_maintainer_other], [enable])
+ m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
+AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+ dnl maintainer-mode's default is 'disable' unless 'enable' is passed
+ AC_ARG_ENABLE([maintainer-mode],
+ [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode],
+ am_maintainer_other[ make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer])],
+ [USE_MAINTAINER_MODE=$enableval],
+ [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
+ AC_MSG_RESULT([$USE_MAINTAINER_MODE])
+ AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
+ MAINT=$MAINTAINER_MODE_TRUE
+ AC_SUBST([MAINT])dnl
+]
+)
+
+# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from 'make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+
+# Copyright (C) 1997-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it is modern enough.
+# If it is, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+ am_missing_run="$MISSING "
+else
+ am_missing_run=
+ AC_MSG_WARN(['missing' script is too old or missing])
+fi
+])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# --------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Copyright (C) 1999-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_CC_C_O
+# ---------------
+# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC
+# to automatically call this.
+AC_DEFUN([_AM_PROG_CC_C_O],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([compile])dnl
+AC_LANG_PUSH([C])dnl
+AC_CACHE_CHECK(
+ [whether $CC understands -c and -o together],
+ [am_cv_prog_cc_c_o],
+ [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
+ # Make sure it works both with $CC and with simple cc.
+ # Following AC_PROG_CC_C_O, we do the test twice because some
+ # compilers refuse to overwrite an existing .o file with -o,
+ # though they will create one.
+ am_cv_prog_cc_c_o=yes
+ for am_i in 1 2; do
+ if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
+ && test -f conftest2.$ac_objext; then
+ : OK
+ else
+ am_cv_prog_cc_c_o=no
+ break
+ fi
+ done
+ rm -f core conftest*
+ unset am_i])
+if test "$am_cv_prog_cc_c_o" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+AC_LANG_POP([C])])
+
+# For backward compatibility.
+AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
+
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_RUN_LOG(COMMAND)
+# -------------------
+# Run COMMAND, save the exit status in ac_status, and log it.
+# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
+AC_DEFUN([AM_RUN_LOG],
+[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
+ ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ (exit $ac_status); }])
+
+# Check to make sure that the build environment is sane. -*- Autoconf -*-
+
+# Copyright (C) 1996-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[[\\\"\#\$\&\'\`$am_lf]]*)
+ AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+ *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
+ AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ am_has_slept=no
+ for am_try in 1 2; do
+ echo "timestamp, slept: $am_has_slept" > conftest.file
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+ alias in your environment])
+ fi
+ if test "$[2]" = conftest.file || test $am_try -eq 2; then
+ break
+ fi
+ # Just in case.
+ sleep 1
+ am_has_slept=yes
+ done
+ test "$[2]" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT([yes])
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+ ( sleep 1 ) &
+ am_sleep_pid=$!
+fi
+AC_CONFIG_COMMANDS_PRE(
+ [AC_MSG_CHECKING([that generated files are newer than configure])
+ if test -n "$am_sleep_pid"; then
+ # Hide warnings about reused PIDs.
+ wait $am_sleep_pid 2>/dev/null
+ fi
+ AC_MSG_RESULT([done])])
+rm -f conftest.file
+])
+
+# Copyright (C) 2009-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SILENT_RULES([DEFAULT])
+# --------------------------
+# Enable less verbose build rules; with the default set to DEFAULT
+# ("yes" being less verbose, "no" or empty being verbose).
+AC_DEFUN([AM_SILENT_RULES],
+[AC_ARG_ENABLE([silent-rules], [dnl
+AS_HELP_STRING(
+ [--enable-silent-rules],
+ [less verbose build output (undo: "make V=1")])
+AS_HELP_STRING(
+ [--disable-silent-rules],
+ [verbose build output (undo: "make V=0")])dnl
+])
+case $enable_silent_rules in @%:@ (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
+esac
+dnl
+dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
+dnl do not support nested variable expansions.
+dnl See automake bug#9928 and bug#10237.
+am_make=${MAKE-make}
+AC_CACHE_CHECK([whether $am_make supports nested variables],
+ [am_cv_make_support_nested_variables],
+ [if AS_ECHO([['TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi])
+if test $am_cv_make_support_nested_variables = yes; then
+ dnl Using '$V' instead of '$(V)' breaks IRIX make.
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AC_SUBST([AM_V])dnl
+AM_SUBST_NOTMAKE([AM_V])dnl
+AC_SUBST([AM_DEFAULT_V])dnl
+AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
+AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
+AM_BACKSLASH='\'
+AC_SUBST([AM_BACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
+])
+
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor 'install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in "make install-strip", and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip". However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# --------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball. -*- Autoconf -*-
+
+# Copyright (C) 2004-2017 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of 'v7', 'ustar', or 'pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+# tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+# $(am__untar) < result.tar
+#
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility. Yes, it's still used
+# in the wild :-( We should find a proper way to deprecate it ...
+AC_SUBST([AMTAR], ['$${TAR-tar}'])
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+
+m4_if([$1], [v7],
+ [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
+
+ [m4_case([$1],
+ [ustar],
+ [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
+ # There is notably a 21 bits limit for the UID and the GID. In fact,
+ # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+ # and bug#13588).
+ am_max_uid=2097151 # 2^21 - 1
+ am_max_gid=$am_max_uid
+ # The $UID and $GID variables are not portable, so we need to resort
+ # to the POSIX-mandated id(1) utility. Errors in the 'id' calls
+ # below are definitely unexpected, so allow the users to see them
+ # (that is, avoid stderr redirection).
+ am_uid=`id -u || echo unknown`
+ am_gid=`id -g || echo unknown`
+ AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
+ if test $am_uid -le $am_max_uid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi
+ AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
+ if test $am_gid -le $am_max_gid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi],
+
+ [pax],
+ [],
+
+ [m4_fatal([Unknown tar format])])
+
+ AC_MSG_CHECKING([how to create a $1 tar archive])
+
+ # Go ahead even if we have the value already cached. We do so because we
+ # need to set the values for the 'am__tar' and 'am__untar' variables.
+ _am_tools=${am_cv_prog_tar_$1-$_am_tools}
+
+ for _am_tool in $_am_tools; do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar; do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works.
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ AM_RUN_LOG([cat conftest.dir/file])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+ done
+ rm -rf conftest.dir
+
+ AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+ AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([../config/acx.m4])
+m4_include([../config/depstand.m4])
+m4_include([../config/lead-dot.m4])
+m4_include([../config/no-executables.m4])
+m4_include([../config/override.m4])
+m4_include([../config/toolexeclibdir.m4])
+m4_include([../libtool.m4])
+m4_include([../ltoptions.m4])
+m4_include([../ltsugar.m4])
+m4_include([../ltversion.m4])
+m4_include([../lt~obsolete.m4])
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2023-09-21 9:34 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-09-21 9:32 [PATCH 3/3 v2] build: Regenerate build files Arthur Cohen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).