* GCC Compiler
@ 2002-04-11 9:32 Vincent Ogwuagwu
0 siblings, 0 replies; 19+ messages in thread
From: Vincent Ogwuagwu @ 2002-04-11 9:32 UTC (permalink / raw)
To: gcc
Dear Sir,
I have downloaded and installed cygwin in a directory
C:/cygwin.
I have also downloaded gcc version 3.0.3 full version
zipped.
My problem now is that I have not been able to unzip
the compiler.
Please sir I need your assistance in this regard to
enable me use the compiler.
Please Sir if there is any other software that I am
download from your site or the cygwin site to enable
me unzip the compiler do let me know. Please I am
using windows system.
Looking forward to receiving your reply.
Thank you in anticipation.
Yours Sincerely,
Ogwuagwu, O. Vincent.
__________________________________________________
Do You Yahoo!?
Yahoo! Tax Center - online filing with TurboTax
http://taxes.yahoo.com/
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: GCC Compiler
2005-05-31 15:11 Thomas Bernard
@ 2005-05-31 16:05 ` sjhill
0 siblings, 0 replies; 19+ messages in thread
From: sjhill @ 2005-05-31 16:05 UTC (permalink / raw)
To: Thomas Bernard; +Cc: gcc
> I am doing a study about compilers. I have to monitor many existing
> compilers and benchmark them. After I have to modify and optimize the
> 'back-end' part for multithreads models.
>
You should go look at Scott's site (http://www.coyotegulch.com/) as he
does a lot of benchmarking.
> I have found your works and I would like to have more informations about
> the IR (Intermediate Representation) during the compilation. For
> example, if a file containing the IR is created during the compilation.
> If there is another way,I would like to know how can I access the IR.
> Is it easy to modify? etc...
>
> If you can give me some documents about your IR (and RTL, Back-End).
>
RTFM. In all seriousness, you go to the main GCC page (http://gcc.gnu.org)
and look in the documentation sections. Some good starting places are:
http://gcc.gnu.org/wiki
http://gcc.gnu.org/readings.html
When you have read all of that, then come back and ask some more
questions. Cheers.
-Steve
^ permalink raw reply [flat|nested] 19+ messages in thread
* GCC Compiler
@ 2005-05-31 15:11 Thomas Bernard
2005-05-31 16:05 ` sjhill
0 siblings, 1 reply; 19+ messages in thread
From: Thomas Bernard @ 2005-05-31 15:11 UTC (permalink / raw)
To: gcc
Dear Sir,
My name is Thomas Bernard. I am working as a Master Student for the UvA
(Universitat Van Amsterdam) in the section of Computers Systems
Architecture of the Informatics Institute.
I am doing a study about compilers. I have to monitor many existing
compilers and benchmark them. After I have to modify and optimize the
'back-end' part for multithreads models.
I have found your works and I would like to have more informations about
the IR (Intermediate Representation) during the compilation. For
example, if a file containing the IR is created during the compilation.
If there is another way,I would like to know how can I access the IR.
Is it easy to modify? etc...
If you can give me some documents about your IR (and RTL, Back-End).
Best wishes,
Thomas Bernard
--
=========================================
Thomas Bernard
Section of Computer Systems Architecture
Universiteit van Amsterdam
Informatics Institute
Kruislaan 403
1098 SJ Amsterdam
Room F.221
E-Mail: tbernard@science.uva.nl
Cell Phone : +33 6 18 22 67 83
=========================================
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: gcc compiler
2003-07-10 11:50 gcc compiler davidfranks
@ 2003-07-10 12:38 ` Diego Novillo
0 siblings, 0 replies; 19+ messages in thread
From: Diego Novillo @ 2003-07-10 12:38 UTC (permalink / raw)
To: davidfranks; +Cc: gcc
On Thu, 2003-07-10 at 06:50, davidfranks@eircom.net wrote:
> I was wondering if there is a switch that will convert the code to SSA
> form and allow this new file with the code in SSA form to be viewed.
>
You may be interested in Tree SSA: http://gcc.gnu.org/projects/tree-ssa/
Diego.
^ permalink raw reply [flat|nested] 19+ messages in thread
* gcc compiler
@ 2003-07-10 11:50 davidfranks
2003-07-10 12:38 ` Diego Novillo
0 siblings, 1 reply; 19+ messages in thread
From: davidfranks @ 2003-07-10 11:50 UTC (permalink / raw)
To: gcc
Hi All,
I am new to using the gcc compiler.
I was wondering if there is a switch that will convert the code to SSA form and allow this new file with the code in SSA form to be viewed.
Kind Regards
David
^ permalink raw reply [flat|nested] 19+ messages in thread
* GCC Compiler
@ 2002-07-17 9:25 Eddie Riby
0 siblings, 0 replies; 19+ messages in thread
From: Eddie Riby @ 2002-07-17 9:25 UTC (permalink / raw)
To: gcc
Hi there, I saved and executed your software so that I could have a C
compiler. It was titled 2002-6-25FREAKS. I don't know how to use it? A
friend of mine had it installed under START PROGRAMS and it would go to the
DOS prompt. How can I make it like this? When I executed the download it put
8 folders on my c drive. Is it in one of the folders? Thanks
Ed
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Gcc compiler
@ 2002-05-31 10:28 aschwarz1309
0 siblings, 0 replies; 19+ messages in thread
From: aschwarz1309 @ 2002-05-31 10:28 UTC (permalink / raw)
To: gcc; +Cc: kwall, nickg653
Just a thought. Cygwin (www.cygwin.com) supports gcc
2.95.3 on Win9x, WinNT, Win2000. If you need later
versions you have to make them yourself.
art
Scribbling feverishly on May 19, Christopher Faylor
managed to emit:
> On Sun, May 19, 2002 at 10:24:07PM -0400, Kurt Wall
wrote:
> >Scribbling feverishly on May 19, Nick Gauthier
managed to emit:
> >> I am just getting into C++, and I was wondering if I
> >> could get a copy of the GCC compiler. I am not
stupid,
> >> i checked the site. To my dismay, the only versions
> >> were for far superior Linux users. I am not at that
> >> enlightened stage yet, and am still struggling with
> >> *gasp* windows ME. I was wonder if GCC came in a
> >> version I can use in windows. If you make one, can
you
> >> send me the URL please?
> >> Thank you for your time
> >> Nick G
> >
> >The page at http://gcc.gnu.org/install/binaries.html
lists binaries
> >for DOS, Windows 95, Windows 98, and Windows NT. I'm
sure one of them
> >will work for Window ME.
>
> Did you actually click on the links? Any of them will
work.
Ook? Yes I clicked the links. The Cygwin and GNU Win32
links both
worked.
Kurt
--
Two can Live as Cheaply as One for Half as Long.
-- Howard Kandel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Gcc compiler
2002-05-19 22:45 ` Christopher Faylor
@ 2002-05-20 5:52 ` Kurt Wall
0 siblings, 0 replies; 19+ messages in thread
From: Kurt Wall @ 2002-05-20 5:52 UTC (permalink / raw)
To: Nick Gauthier, gcc
Scribbling feverishly on May 19, Christopher Faylor managed to emit:
> On Sun, May 19, 2002 at 10:24:07PM -0400, Kurt Wall wrote:
> >Scribbling feverishly on May 19, Nick Gauthier managed to emit:
> >> I am just getting into C++, and I was wondering if I
> >> could get a copy of the GCC compiler. I am not stupid,
> >> i checked the site. To my dismay, the only versions
> >> were for far superior Linux users. I am not at that
> >> enlightened stage yet, and am still struggling with
> >> *gasp* windows ME. I was wonder if GCC came in a
> >> version I can use in windows. If you make one, can you
> >> send me the URL please?
> >> Thank you for your time
> >> Nick G
> >
> >The page at http://gcc.gnu.org/install/binaries.html lists binaries
> >for DOS, Windows 95, Windows 98, and Windows NT. I'm sure one of them
> >will work for Window ME.
>
> Did you actually click on the links? Any of them will work.
Ook? Yes I clicked the links. The Cygwin and GNU Win32 links both
worked.
Kurt
--
Two can Live as Cheaply as One for Half as Long.
-- Howard Kandel
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Gcc compiler
2002-05-19 21:49 ` Kurt Wall
@ 2002-05-19 22:45 ` Christopher Faylor
2002-05-20 5:52 ` Kurt Wall
0 siblings, 1 reply; 19+ messages in thread
From: Christopher Faylor @ 2002-05-19 22:45 UTC (permalink / raw)
To: Kurt Wall, Nick Gauthier, gcc
On Sun, May 19, 2002 at 10:24:07PM -0400, Kurt Wall wrote:
>Scribbling feverishly on May 19, Nick Gauthier managed to emit:
>> I am just getting into C++, and I was wondering if I
>> could get a copy of the GCC compiler. I am not stupid,
>> i checked the site. To my dismay, the only versions
>> were for far superior Linux users. I am not at that
>> enlightened stage yet, and am still struggling with
>> *gasp* windows ME. I was wonder if GCC came in a
>> version I can use in windows. If you make one, can you
>> send me the URL please?
>> Thank you for your time
>> Nick G
>
>The page at http://gcc.gnu.org/install/binaries.html lists binaries
>for DOS, Windows 95, Windows 98, and Windows NT. I'm sure one of them
>will work for Window ME.
Did you actually click on the links? Any of them will work.
cgf
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Gcc compiler
2002-05-19 15:38 Nick Gauthier
2002-05-19 16:51 ` Tim Prince
@ 2002-05-19 21:49 ` Kurt Wall
2002-05-19 22:45 ` Christopher Faylor
1 sibling, 1 reply; 19+ messages in thread
From: Kurt Wall @ 2002-05-19 21:49 UTC (permalink / raw)
To: Nick Gauthier; +Cc: gcc
Scribbling feverishly on May 19, Nick Gauthier managed to emit:
> I am just getting into C++, and I was wondering if I
> could get a copy of the GCC compiler. I am not stupid,
> i checked the site. To my dismay, the only versions
> were for far superior Linux users. I am not at that
> enlightened stage yet, and am still struggling with
> *gasp* windows ME. I was wonder if GCC came in a
> version I can use in windows. If you make one, can you
> send me the URL please?
> Thank you for your time
> Nick G
Nick,
The page at http://gcc.gnu.org/install/binaries.html lists binaries
for DOS, Windows 95, Windows 98, and Windows NT. I'm sure one of them
will work for Window ME.
Kurt
--
The early bird who catches the worm works for someone who comes in late
and owns the worm farm.
-- Travis McGee
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Gcc compiler
2002-05-19 15:38 Nick Gauthier
@ 2002-05-19 16:51 ` Tim Prince
2002-05-19 21:49 ` Kurt Wall
1 sibling, 0 replies; 19+ messages in thread
From: Tim Prince @ 2002-05-19 16:51 UTC (permalink / raw)
To: Nick Gauthier, gcc
On Sunday 19 May 2002 15:22, Nick Gauthier wrote:
> I am just getting into C++, and I was wondering if I
> could get a copy of the GCC compiler. I am not stupid,
> i checked the site. To my dismay, the only versions
> were for far superior Linux users. I am not at that
> enlightened stage yet, and am still struggling with
> *gasp* windows ME. I was wonder if GCC came in a
> version I can use in windows. If you make one, can you
> send me the URL please?
> Thank you for your time
> Nick G
Last time I looked, gcc.gnu.org, in the section about where to find pre-built
versions, had links to the cygwin and mingw distributions. They should be
found easily by web searches as well. Not that it wouldn't be worth your
effort to upgrade to a more recent Windows or to linux.
--
Tim Prince
^ permalink raw reply [flat|nested] 19+ messages in thread
* Gcc compiler
@ 2002-05-19 15:38 Nick Gauthier
2002-05-19 16:51 ` Tim Prince
2002-05-19 21:49 ` Kurt Wall
0 siblings, 2 replies; 19+ messages in thread
From: Nick Gauthier @ 2002-05-19 15:38 UTC (permalink / raw)
To: gcc
I am just getting into C++, and I was wondering if I
could get a copy of the GCC compiler. I am not stupid,
i checked the site. To my dismay, the only versions
were for far superior Linux users. I am not at that
enlightened stage yet, and am still struggling with
*gasp* windows ME. I was wonder if GCC came in a
version I can use in windows. If you make one, can you
send me the URL please?
Thank you for your time
Nick G
__________________________________________________
Do You Yahoo!?
LAUNCH - Your Yahoo! Music Experience
http://launch.yahoo.com
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: GCC Compiler...
2001-03-14 15:01 GCC Compiler Brad Roberts
@ 2001-03-14 15:31 ` Craig Rodrigues
0 siblings, 0 replies; 19+ messages in thread
From: Craig Rodrigues @ 2001-03-14 15:31 UTC (permalink / raw)
To: Brad Roberts; +Cc: GCC, GNU
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 714 bytes --]
On Wed, Mar 14, 2001 at 03:00:49PM -0800, Brad Roberts wrote:
>
> Dear GCC and/or GNU,
>
>
> I want to be able to compile and execute C programs, I am just beginning
> to learn the language and am generally not to computer literate.
> If there are âÂÂdumbed downâ installation instructions please
> direct me to those. Or I would be happy to purchase the software on
> a CD-ROM if that would make it easier for me to load and use.
You might fare better if you install the Cygwin package:
http://sources.redhat.com/cygwin/
That has a more user-friendly installation, and is also available on CD.
--
Craig Rodrigues
http://www.gis.net/~craigr
rodrigc@mediaone.net
^ permalink raw reply [flat|nested] 19+ messages in thread
* GCC Compiler...
@ 2001-03-14 15:01 Brad Roberts
2001-03-14 15:31 ` Craig Rodrigues
0 siblings, 1 reply; 19+ messages in thread
From: Brad Roberts @ 2001-03-14 15:01 UTC (permalink / raw)
To: GCC; +Cc: GNU
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 4300 bytes --]
Dear GCC and/or GNU,   I downloaded all four components GCC, binutils, mingw32 and the windows32api headers.  I followed the in structions on the installation page, unfortunately I was not successful getting the GCC Compiler to work.  The response is âÂÂBad Command.â  Below is a copy of my AutoExec.bat file.  Below that is a outline of the folders.  If you can offer any advice I would appreciate it.  I want to be able to compile and execute C programs, I am just beginning to learn the language and am generally not to computer literate.  If there are âÂÂdumbed downâ installation instructions please direct me to those.  Or I would be happy to purchase the software on a CD-ROM if that would make it easier for me to load and use.  (I was referred to your site by my professor Dr. Blaine Garfolo (SFSU)âÂÂhe assumes more technical ability than I have.)  If you can provide me with any assistance I would certainly appreciate it.  You can eMail me at MSN.com, RobertsBrad. Thank you for your help.  Autoexec.bat:  @ECHO OFF path=c:\windows;c:\windows\command;c:\MINGW32\BIN \hibinv.exe set C_INCLUDE_PATH=C:\MINGW32\include set CPLUS_INCLUDE_PATH=C:\MINGW32\include\g++;C:\MINGW32\include set LIBRARY_PATH=C:\MINGW32\lib set GCC_EXEC_PREFIX=C:\MINGW32\lib\gcc-lib\ call \checksr.bat IF "%config%"=="QUICK" GOTO QUICK set EXPAND=YES SET DIRCMD=/O:N set LglDrv=27 * 26 Z 25 Y 24 X 23 W 22 V 21 U 20 T 19 S 18 R 17 Q 16 P 15 set LglDrv=%LglDrv% O 14 N 13 M 12 L 11 K 10 J 9 I 8 H 7 G 6 F 5 E 4 D 3 C cls call setramd.bat %LglDrv% set temp=c:\ set tmp=c:\ path=%RAMD%:\;a:\;%path%;%CDROM%:\ copy command.com %RAMD%:\ > NUL set comspec=%RAMD%:\command.com copy extract.exe %RAMD%:\ > NUL copy readme.txt %RAMD%:\ > NUL  :ERROR IF EXIST ebd.cab GOTO EXT echo Please insert Windows Millennium Edition Startup Disk 2 echo. pause GOTO ERROR  :EXT %RAMD%:\extract /y /e /l %RAMD%: ebd.cab > NUL echo The diagnostic tools were successfully loaded to drive %RAMD%. echo.  IF "%config%"=="NOCD" GOTO QUIT IF "%config%"=="HELP" GOTO HELP LH %ramd%:\MSCDEX.EXE /D:mscd001 /L:%CDROM% ::If MSCDEX doesn't find a drive... IF ERRORLEVEL 1 SET CDPROB=1 :: GOTO QUIT  :HELP LH %ramd%:\MSCDEX.EXE /D:mscd001 /L:%CDROM% ::If MSCDEX doesn't find a drive... IF ERRORLEVEL 1 SET CDPROB=1 cls call help.bat :: GOTO QUIT  :QUIT call fixit.bat rem clean up environment variables set CDPROB= set CDROM= set LglDrv= GOTO QUICK  :QUICK Directories: C:\MINGW32\    gas-980119\        bin        hlp        include        lib\            ldscripts     gcc-2.8.1\        bin        hlp        lib\            gcc-lib\                i386-mingw32\                    2.8.1\                        include\                            objc       mingw32-980105\        include\            sys        lib        samples\            dlltest\                rcs            fixargv\                rcs            globbing\                rcs            seh            test\                rcs     windows32api-980118\        include\            Windows32        lib Get your FREE download of MSN Explorer at http://explorer.msn.com
^ permalink raw reply [flat|nested] 19+ messages in thread
* GCC compiler...
@ 2001-03-14 14:39 Brad Roberts
0 siblings, 0 replies; 19+ messages in thread
From: Brad Roberts @ 2001-03-14 14:39 UTC (permalink / raw)
To: GCC; +Cc: GNU
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 4287 bytes --]
 Dear GNU and/or GCC,  I downloaded all four components GCC, binutils, mingw32 and the windows32api headers.  I followed the in structions on the installation page, unfortunately I was not successful getting the GCC Compiler to work.  The response is âÂÂBad Command.â  Below is a copy of my AutoExec.bat file.  Below that is a outline of the folders.  If you can offer any advice I would appreciate it.  I want to be able to compile and execute C programs, I am just beginning to learn the language and am generally not to computer literate.  If there are âÂÂdumbed downâ installation instructions please direct me to those.  Or I would be happy to purchase the software on a CD-ROM if that would make it easier for me to load and use.  (I was referred to your site by my professor Dr. Blaine Garfolo (SFSU)âÂÂhe assumes more technical ability than I have.)  If you can provide me with any assistance I would certainly appreciate it.  My email address is RobertsBrad@MSN.com .  Thank you for your help.  Brad Roberts  Autoexec.bat:  @ECHO OFF path=c:\windows;c:\windows\command;c:\MINGW32\BIN \hibinv.exe set C_INCLUDE_PATH=C:\MINGW32\include set CPLUS_INCLUDE_PATH=C:\MINGW32\include\g++;C:\MINGW32\include set LIBRARY_PATH=C:\MINGW32\lib set GCC_EXEC_PREFIX=C:\MINGW32\lib\gcc-lib\ call \checksr.bat IF "%config%"=="QUICK" GOTO QUICK set EXPAND=YES SET DIRCMD=/O:N set LglDrv=27 * 26 Z 25 Y 24 X 23 W 22 V 21 U 20 T 19 S 18 R 17 Q 16 P 15 set LglDrv=%LglDrv% O 14 N 13 M 12 L 11 K 10 J 9 I 8 H 7 G 6 F 5 E 4 D 3 C cls call setramd.bat %LglDrv% set temp=c:\ set tmp=c:\ path=%RAMD%:\;a:\;%path%;%CDROM%:\ copy command.com %RAMD%:\ > NUL set comspec=%RAMD%:\command.com copy extract.exe %RAMD%:\ > NUL copy readme.txt %RAMD%:\ > NUL  :ERROR IF EXIST ebd.cab GOTO EXT echo Please insert Windows Millennium Edition Startup Disk 2 echo. pause GOTO ERROR  :EXT %RAMD%:\extract /y /e /l %RAMD%: ebd.cab > NUL echo The diagnostic tools were successfully loaded to drive %RAMD%. echo.  IF "%config%"=="NOCD" GOTO QUIT IF "%config%"=="HELP" GOTO HELP LH %ramd%:\MSCDEX.EXE /D:mscd001 /L:%CDROM% ::If MSCDEX doesn't find a drive... IF ERRORLEVEL 1 SET CDPROB=1 :: GOTO QUIT  :HELP LH %ramd%:\MSCDEX.EXE /D:mscd001 /L:%CDROM% ::If MSCDEX doesn't find a drive... IF ERRORLEVEL 1 SET CDPROB=1 cls call help.bat :: GOTO QUIT  :QUIT call fixit.bat rem clean up environment variables set CDPROB= set CDROM= set LglDrv= GOTO QUICK  :QUICK       Directories:  C:\MINGW32\    gas-980119\        bin        hlp        include        lib\            ldscripts     gcc-2.8.1\        bin        hlp        lib\            gcc-lib\                i386-mingw32\                    2.8.1\                        include\                            objc       mingw32-980105\        include\            sys        lib        samples\            dlltest\                rcs            fixargv\                rcs            globbing\                rcs            seh            test\                rcs     windows32api-980118\        include\            Windows32        lib
^ permalink raw reply [flat|nested] 19+ messages in thread
* GCC compiler
1999-12-19 23:48 Hung Vu
1999-12-20 0:02 ` llewelly
@ 1999-12-31 23:54 ` Hung Vu
1 sibling, 0 replies; 19+ messages in thread
From: Hung Vu @ 1999-12-31 23:54 UTC (permalink / raw)
To: gcc
Dear Sir,
My OS is sparc-sun-solaris2.6.
I tared successfully the gcc_2_95_1_tar.gz downloaded from .. I run the
"configure" command and I had the following:
# /export/home/gcc-2.95.1/configure
Configuring for a sparc-sun-solaris2.6 host.
Created "Makefile" in /usr/local using "mh-frag"
/export/home/gcc-2.95.1/configure: cc: not found
*** The command 'cc -o conftest -g conftest.c' failed.
*** You must set the environment variable CC to a working compiler
Current my OS doesn't have any working compiler. I tried the cc command and
had the error message :"/usr/ucb/cc: language optional software package not
installed".
How do I need to do more to install the GCC compiler.
Thanks .
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: GCC compiler
1999-12-20 0:02 ` llewelly
@ 1999-12-31 23:54 ` llewelly
0 siblings, 0 replies; 19+ messages in thread
From: llewelly @ 1999-12-31 23:54 UTC (permalink / raw)
To: Hung Vu; +Cc: gcc
On Mon, 20 Dec 1999, Hung Vu wrote:
> Dear Sir,
> My OS is sparc-sun-solaris2.6.
> I tared successfully the gcc_2_95_1_tar.gz downloaded from .. I run the
> "configure" command and I had the following:
> # /export/home/gcc-2.95.1/configure
> Configuring for a sparc-sun-solaris2.6 host.
> Created "Makefile" in /usr/local using "mh-frag"
> /export/home/gcc-2.95.1/configure: cc: not found
> *** The command 'cc -o conftest -g conftest.c' failed.
> *** You must set the environment variable CC to a working compiler
> Current my OS doesn't have any working compiler. I tried the cc command and
> had the error message :"/usr/ucb/cc: language optional software package not
> installed".
>
> How do I need to do more to install the GCC compiler.
>
> Thanks .
>
Look around on the internet for pre-compiled gcc binaries. Try
http://smc.vnet.net (suns freeware site.) These binaries are usually
easy to find. However, most of them are compiled to install under
/usr/local/. If you do not have write permissions to /usr/local, you
will need to find binaries compiled to install into a dir you *do* have
write permissions to.
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: GCC compiler
1999-12-19 23:48 Hung Vu
@ 1999-12-20 0:02 ` llewelly
1999-12-31 23:54 ` llewelly
1999-12-31 23:54 ` Hung Vu
1 sibling, 1 reply; 19+ messages in thread
From: llewelly @ 1999-12-20 0:02 UTC (permalink / raw)
To: Hung Vu; +Cc: gcc
On Mon, 20 Dec 1999, Hung Vu wrote:
> Dear Sir,
> My OS is sparc-sun-solaris2.6.
> I tared successfully the gcc_2_95_1_tar.gz downloaded from .. I run the
> "configure" command and I had the following:
> # /export/home/gcc-2.95.1/configure
> Configuring for a sparc-sun-solaris2.6 host.
> Created "Makefile" in /usr/local using "mh-frag"
> /export/home/gcc-2.95.1/configure: cc: not found
> *** The command 'cc -o conftest -g conftest.c' failed.
> *** You must set the environment variable CC to a working compiler
> Current my OS doesn't have any working compiler. I tried the cc command and
> had the error message :"/usr/ucb/cc: language optional software package not
> installed".
>
> How do I need to do more to install the GCC compiler.
>
> Thanks .
>
Look around on the internet for pre-compiled gcc binaries. Try
http://smc.vnet.net (suns freeware site.) These binaries are usually
easy to find. However, most of them are compiled to install under
/usr/local/. If you do not have write permissions to /usr/local, you
will need to find binaries compiled to install into a dir you *do* have
write permissions to.
^ permalink raw reply [flat|nested] 19+ messages in thread
* GCC compiler
@ 1999-12-19 23:48 Hung Vu
1999-12-20 0:02 ` llewelly
1999-12-31 23:54 ` Hung Vu
0 siblings, 2 replies; 19+ messages in thread
From: Hung Vu @ 1999-12-19 23:48 UTC (permalink / raw)
To: gcc
Dear Sir,
My OS is sparc-sun-solaris2.6.
I tared successfully the gcc_2_95_1_tar.gz downloaded from .. I run the
"configure" command and I had the following:
# /export/home/gcc-2.95.1/configure
Configuring for a sparc-sun-solaris2.6 host.
Created "Makefile" in /usr/local using "mh-frag"
/export/home/gcc-2.95.1/configure: cc: not found
*** The command 'cc -o conftest -g conftest.c' failed.
*** You must set the environment variable CC to a working compiler
Current my OS doesn't have any working compiler. I tried the cc command and
had the error message :"/usr/ucb/cc: language optional software package not
installed".
How do I need to do more to install the GCC compiler.
Thanks .
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
^ permalink raw reply [flat|nested] 19+ messages in thread
end of thread, other threads:[~2005-05-31 14:13 UTC | newest]
Thread overview: 19+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2002-04-11 9:32 GCC Compiler Vincent Ogwuagwu
-- strict thread matches above, loose matches on Subject: below --
2005-05-31 15:11 Thomas Bernard
2005-05-31 16:05 ` sjhill
2003-07-10 11:50 gcc compiler davidfranks
2003-07-10 12:38 ` Diego Novillo
2002-07-17 9:25 GCC Compiler Eddie Riby
2002-05-31 10:28 Gcc compiler aschwarz1309
2002-05-19 15:38 Nick Gauthier
2002-05-19 16:51 ` Tim Prince
2002-05-19 21:49 ` Kurt Wall
2002-05-19 22:45 ` Christopher Faylor
2002-05-20 5:52 ` Kurt Wall
2001-03-14 15:01 GCC Compiler Brad Roberts
2001-03-14 15:31 ` Craig Rodrigues
2001-03-14 14:39 GCC compiler Brad Roberts
1999-12-19 23:48 Hung Vu
1999-12-20 0:02 ` llewelly
1999-12-31 23:54 ` llewelly
1999-12-31 23:54 ` Hung Vu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).