public inbox for gdb-cvs@sourceware.org
help / color / mirror / Atom feed
* [binutils-gdb] gdb: link executables with libtool
@ 2022-11-07 15:50 Jose E. Marchesi
0 siblings, 0 replies; only message in thread
From: Jose E. Marchesi @ 2022-11-07 15:50 UTC (permalink / raw)
To: gdb-cvs
https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;h=b686ecb5b10be9a33ab8f1bfdcff22eef920d1a5
commit b686ecb5b10be9a33ab8f1bfdcff22eef920d1a5
Author: Jose E. Marchesi <jose.marchesi@oracle.com>
Date: Sat Nov 5 11:52:09 2022 +0100
gdb: link executables with libtool
This patch changes the GDB build system in order to use libtool to
link the several built executables. This makes it possible to refer
to libtool libraries (.la files) in CLIBS.
As an application of the above,
BFD now refers to ../libbfd/libbfd.la
OPCODES now refers to ../opcodes/libopcodes.la
LIBBACKTRACE_LIB now refers to ../libbacktrace/libbacktrace.la
LIBCTF now refers to ../libctf/libctf.la
NOTE1: The addition of libtool adds a few new configure-time options
to GDB. Among these, --enable-shared and --disable-shared, which were
previously ignored. Now GDB shall honor these options when linking,
picking up the right version of the referred libtool libraries
automagically.
NOTE2: I have not tested the insight build.
NOTE3: For regenerating configure I used an environment with Autoconf
2.69 and Automake 1.15.1. This should match the previously
used version as announced in the configure script.
NOTE4: Now the installed shared objects libbfd.so, libopcodes.so and
libctf.so are used by gdb if binutils is installed with
--enable-shared.
Testing performed:
- --enable-shared and --disable-shared (the default in binutils) work
as expected: the linked executables link with the archive or shared
libraries transparently.
- Makefile.in modified for EXEEXT = .exe. It installs the binaries
just fine. The installed gdb.exe runs fine.
- Native build regtested in x86_64. No regressions found.
- Cross build for aarch64-linux-gnu built to exercise
program_transform_name and friends. The installed
aarch64-linux-gnu-gdb runs fine.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29372
Approved-By: Simon Marchi <simon.marchi@efficios.com>
Diff:
---
gdb/Makefile.in | 14 +-
gdb/aclocal.m4 | 5 +
gdb/config.in | 4 +
gdb/configure | 31544 +++++++++++++++++++++++++++++++++++------------------
gdb/configure.ac | 17 +-
5 files changed, 21132 insertions(+), 10452 deletions(-)
diff --git a/gdb/Makefile.in b/gdb/Makefile.in
index c528ee5aa80..522fc20bccd 100644
--- a/gdb/Makefile.in
+++ b/gdb/Makefile.in
@@ -143,10 +143,12 @@ MAKEINFO_CMD = $(MAKEINFO) $(MAKEINFOFLAGS) $(MAKEINFO_EXTRA_FLAGS)
MAKEHTML = $(MAKEINFO_CMD) --html
MAKEHTMLFLAGS =
+LIBTOOL = @LIBTOOL@
+
# Set this up with gcc if you have gnu ld and the loader will print out
# line numbers for undefined references.
#CC_LD = g++ -static
-CC_LD = $(CXX) $(CXX_DIALECT)
+CC_LD = $(LIBTOOL) --mode=link $(CXX) $(CXX_DIALECT)
# Where is our "include" directory? Typically $(srcdir)/../include.
# This is essentially the header file directory for the library
@@ -163,7 +165,7 @@ CTF_DEPS = @CTF_DEPS@
# Where is the BFD library? Typically in ../bfd.
BFD_DIR = ../bfd
-BFD = $(BFD_DIR)/libbfd.a
+BFD = $(BFD_DIR)/libbfd.la
BFD_SRC = $(srcdir)/$(BFD_DIR)
BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC)
@@ -504,7 +506,7 @@ SUBDIR_TARGET_OBS = $(patsubst %.c,%.o,$(SUBDIR_TARGET_SRCS))
# disassemblers?
OPCODES_DIR = ../opcodes
OPCODES_SRC = $(srcdir)/$(OPCODES_DIR)
-OPCODES = $(OPCODES_DIR)/libopcodes.a
+OPCODES = $(OPCODES_DIR)/libopcodes.la
# Where are the other opcode tables which only have header file
# versions?
OP_INCLUDE = $(INCLUDE_DIR)/opcode
@@ -2017,7 +2019,8 @@ install-only: $(CONFIG_INSTALL)
true ; \
fi ; \
$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
- $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) gdb$(EXEEXT) \
+ $(LIBTOOL) --mode=install $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) \
+ gdb$(EXEEXT) \
$(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(includedir)/gdb ; \
$(INSTALL_DATA) jit-reader.h $(DESTDIR)$(includedir)/gdb/jit-reader.h
@@ -2529,7 +2532,8 @@ install-gdbtk:
true ; \
fi ; \
$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir); \
- $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) insight$(EXEEXT) \
+ $(LIBTOOL) --mode=install $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) \
+ insight$(EXEEXT) \
$(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
$(SHELL) $(srcdir)/../mkinstalldirs \
$(DESTDIR)$(GDBTK_LIBRARY) ; \
diff --git a/gdb/aclocal.m4 b/gdb/aclocal.m4
index 3ed4a58d39f..4aac87b52ed 100644
--- a/gdb/aclocal.m4
+++ b/gdb/aclocal.m4
@@ -212,4 +212,9 @@ m4_include([../config/override.m4])
m4_include([../config/pkg.m4])
m4_include([../config/plugins.m4])
m4_include([../config/tcl.m4])
+m4_include([../libtool.m4])
+m4_include([../ltoptions.m4])
+m4_include([../ltsugar.m4])
+m4_include([../ltversion.m4])
+m4_include([../lt~obsolete.m4])
m4_include([acinclude.m4])
diff --git a/gdb/config.in b/gdb/config.in
index e13a409ec2d..736e6be1c48 100644
--- a/gdb/config.in
+++ b/gdb/config.in
@@ -614,6 +614,10 @@
moved. */
#undef JIT_READER_DIR_RELOCATABLE
+/* Define to the sub-directory in which libtool stores uninstalled libraries.
+ */
+#undef LT_OBJDIR
+
/* Name of this package. */
#undef PACKAGE
diff --git a/gdb/configure b/gdb/configure
index 811a598bc8f..b54ac671fe3 100755
--- a/gdb/configure
+++ b/gdb/configure
@@ -196,7 +196,15 @@ test -x / || exit 1"
as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
-test \$(( 1 + 1 )) = 2 || exit 1"
+test \$(( 1 + 1 )) = 2 || exit 1
+
+ test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+ ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+ PATH=/empty FPATH=/empty; export PATH FPATH
+ test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+ || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1"
if (eval "$as_required") 2>/dev/null; then :
as_have_required=yes
else
@@ -553,6 +561,8 @@ as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+SHELL=${CONFIG_SHELL-/bin/sh}
+
test -n "$DJDIR" || exec 7<&0 </dev/null
exec 6>&1
@@ -713,7 +723,6 @@ PTHREAD_CFLAGS
PTHREAD_LIBS
PTHREAD_CC
ax_pthread_config
-SED
ALLOCA
SRCHIGH_CFLAGS
SRCHIGH_LIBS
@@ -754,15 +763,11 @@ zlibdir
MIG
WINDRES
DLLTOOL
-AR
YFLAGS
YACC
-RANLIB
-LN_S
INSTALL_DATA
INSTALL_SCRIPT
INSTALL_PROGRAM
-AWK
REPORT_BUGS_TEXI
REPORT_BUGS_TO
PKGVERSION
@@ -800,6 +805,24 @@ DEPDIR
am__leading_dot
CXX_DIALECT
HAVE_CXX11
+CXXCPP
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+AWK
+RANLIB
+AR
+OBJDUMP
+LN_S
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+SED
+LIBTOOL
target_noncanonical
INSTALL_STRIP_PROGRAM
STRIP
@@ -877,6 +900,12 @@ enable_option_checking
enable_maintainer_mode
enable_plugins
enable_largefile
+enable_shared
+enable_static
+with_pic
+enable_fast_install
+with_gnu_ld
+enable_libtool_lock
with_separate_debug_dir
with_gdb_datadir
with_relocated_sources
@@ -896,7 +925,6 @@ with_pkgversion
with_bugurl
with_system_zlib
with_zstd
-with_gnu_ld
enable_rpath
with_libiconv_prefix
with_libiconv_type
@@ -955,6 +983,7 @@ CXX
CXXFLAGS
CCC
CPP
+CXXCPP
MAKEINFO
MAKEINFOFLAGS
PKG_CONFIG
@@ -1594,6 +1623,11 @@ Optional Features:
sometimes confusing) to the casual installer
--enable-plugins Enable support for plugins
--disable-largefile omit support for large files
+ --enable-shared[=PKGS] build shared libraries [default=yes]
+ --enable-static[=PKGS] build static libraries [default=yes]
+ --enable-fast-install[=PKGS]
+ optimize for fast installation [default=yes]
+ --disable-libtool-lock avoid locking (might break parallel builds)
--enable-targets=TARGETS
alternative target configurations
--enable-64-bit-bfd 64-bit support (on hosts with narrower word sizes)
@@ -1623,6 +1657,9 @@ Optional Features:
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --with-pic try to use only PIC/non-PIC objects [default=use
+ both]
+ --with-gnu-ld assume the C compiler uses GNU ld [default=no]
--with-separate-debug-dir=PATH
look for global separate debug info in this path
[LIBDIR/debug]
@@ -1710,6 +1747,7 @@ Some influential environment variables:
CXX C++ compiler command
CXXFLAGS C++ compiler flags
CPP C preprocessor
+ CXXCPP C++ preprocessor
MAKEINFO Parent configure detects if it is of sufficient version.
MAKEINFOFLAGS
Parameters for MAKEINFO.
@@ -2131,6 +2169,156 @@ fi
} # ac_fn_c_try_link
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $2 (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+
+# ac_fn_cxx_try_cpp LINENO
+# ------------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_cpp ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } > conftest.i && {
+ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_cpp
+
+# ac_fn_cxx_try_link LINENO
+# -------------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_cxx_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ test -x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_link
+
# ac_fn_c_compute_int LINENO EXPR VAR INCLUDES
# --------------------------------------------
# Tries to find the compile-time value of EXPR in a program that includes
@@ -2314,10 +2502,11 @@ rm -f conftest.val
} # ac_fn_c_compute_int
-# ac_fn_c_check_func LINENO FUNC VAR
-# ----------------------------------
-# Tests whether FUNC exists, setting the cache variable VAR accordingly
-ac_fn_c_check_func ()
+# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
+# -------------------------------------------
+# Tests whether TYPE exists after having included INCLUDES, setting cache
+# variable VAR accordingly.
+ac_fn_c_check_type ()
{
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
@@ -2325,167 +2514,53 @@ $as_echo_n "checking for $2... " >&6; }
if eval \${$3+:} false; then :
$as_echo_n "(cached) " >&6
else
+ eval "$3=no"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $2 innocuous_$2
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $2 (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $2
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $2 ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$2 || defined __stub___$2
-choke me
-#endif
-
+$4
int
main ()
{
-return $2 ();
+if (sizeof ($2))
+ return 0;
;
return 0;
}
_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- eval "$3=yes"
+if ac_fn_c_try_compile "$LINENO"; then :
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+if (sizeof (($2)))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
else
- eval "$3=no"
+ eval "$3=yes"
fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
eval ac_res=\$$3
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-} # ac_fn_c_check_func
+} # ac_fn_c_check_type
-# ac_fn_cxx_try_link LINENO
-# -------------------------
-# Try to link conftest.$ac_ext, and return whether this succeeded.
-ac_fn_cxx_try_link ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- rm -f conftest.$ac_objext conftest$ac_exeext
- if { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && {
- test -z "$ac_cxx_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- test -x conftest$ac_exeext
- }; then :
- ac_retval=0
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
- # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
- # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
- # interfere with the next link command; also delete a directory that is
- # left behind by Apple's compiler. We do this before executing the actions.
- rm -rf conftest.dSYM conftest_ipa8_conftest.oo
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_cxx_try_link
-
-# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
-# -------------------------------------------
-# Tests whether TYPE exists after having included INCLUDES, setting cache
-# variable VAR accordingly.
-ac_fn_c_check_type ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- eval "$3=no"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-int
-main ()
-{
-if (sizeof ($2))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-int
-main ()
-{
-if (sizeof (($2)))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
- eval "$3=yes"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-
-} # ac_fn_c_check_type
-
-# ac_fn_c_check_decl LINENO SYMBOL VAR INCLUDES
-# ---------------------------------------------
-# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR
-# accordingly.
-ac_fn_c_check_decl ()
+# ac_fn_c_check_decl LINENO SYMBOL VAR INCLUDES
+# ---------------------------------------------
+# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR
+# accordingly.
+ac_fn_c_check_decl ()
{
as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
as_decl_name=`echo $2|sed 's/ *(.*//'`
@@ -5229,1700 +5304,2078 @@ ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
-# We require a C++11 compiler. Check if one is available, and if
-# necessary, set CXX_DIALECT to some -std=xxx switch.
-
- ax_cxx_compile_alternatives="11 0x" ax_cxx_compile_cxx11_required=true
- ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
- CXX_DIALECT=""
- ac_success=no
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX supports C++11 features by default" >&5
-$as_echo_n "checking whether $CXX supports C++11 features by default... " >&6; }
-if ${ax_cv_cxx_compile_cxx11+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
+# We require libtool to link with the in-tree libtool libraries
+# the proper way.
+case `pwd` in
+ *\ * | *\ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
-// If the compiler admits that it is not ready for C++11, why torture it?
-// Hopefully, this will speed up the test.
-#ifndef __cplusplus
+macro_version='2.2.7a'
+macro_revision='1.3134'
-#error "This is not a C++ compiler"
-#elif __cplusplus < 201103L
-#error "This is not a C++11 compiler"
-#else
-namespace cxx11
-{
- namespace test_static_assert
- {
- template <typename T>
- struct check
- {
- static_assert(sizeof(int) <= sizeof(T), "not big enough");
- };
- }
- namespace test_final_override
- {
- struct Base
- {
- virtual void f() {}
- };
- struct Derived : public Base
- {
- virtual void f() override {}
- };
- }
- namespace test_double_right_angle_brackets
- {
+ltmain="$ac_aux_dir/ltmain.sh"
- template < typename T >
- struct check {};
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
- typedef check<void> single_type;
- typedef check<check<void>> double_type;
- typedef check<check<check<void>>> triple_type;
- typedef check<check<check<check<void>>>> quadruple_type;
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
- }
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
- namespace test_decltype
- {
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
- int
- f()
- {
- int a = 1;
- decltype(a) b = 2;
- return a + b;
- }
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
- }
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
- namespace test_type_deduction
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`print -r -- -n 2>/dev/null`" = X-n && \
+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='printf %s\n'
+else
+ # Use this function as a fallback that always works.
+ func_fallback_echo ()
{
-
- template < typename T1, typename T2 >
- struct is_same
- {
- static const bool value = false;
- };
-
- template < typename T >
- struct is_same<T, T>
- {
- static const bool value = true;
- };
-
- template < typename T1, typename T2 >
- auto
- add(T1 a1, T2 a2) -> decltype(a1 + a2)
- {
- return a1 + a2;
- }
-
- int
- test(const int c, volatile int v)
- {
- static_assert(is_same<int, decltype(0)>::value == true, "");
- static_assert(is_same<int, decltype(c)>::value == false, "");
- static_assert(is_same<int, decltype(v)>::value == false, "");
- auto ac = c;
- auto av = v;
- auto sumi = ac + av + 'x';
- auto sumf = ac + av + 1.0;
- static_assert(is_same<int, decltype(ac)>::value == true, "");
- static_assert(is_same<int, decltype(av)>::value == true, "");
- static_assert(is_same<int, decltype(sumi)>::value == true, "");
- static_assert(is_same<int, decltype(sumf)>::value == false, "");
- static_assert(is_same<int, decltype(add(c, v))>::value == true, "");
- return (sumf > 0.0) ? sumi : add(c, v);
- }
-
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
}
+ ECHO='func_fallback_echo'
+fi
- namespace test_noexcept
- {
-
- int f() { return 0; }
- int g() noexcept { return 0; }
-
- static_assert(noexcept(f()) == false, "");
- static_assert(noexcept(g()) == true, "");
-
- }
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO ""
+}
- namespace test_constexpr
- {
+case "$ECHO" in
+ printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+ print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+ *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
- template < typename CharT >
- unsigned long constexpr
- strlen_c_r(const CharT *const s, const unsigned long acc) noexcept
- {
- return *s ? strlen_c_r(s + 1, acc + 1) : acc;
- }
- template < typename CharT >
- unsigned long constexpr
- strlen_c(const CharT *const s) noexcept
- {
- return strlen_c_r(s, 0UL);
- }
- static_assert(strlen_c("") == 0UL, "");
- static_assert(strlen_c("1") == 1UL, "");
- static_assert(strlen_c("example") == 7UL, "");
- static_assert(strlen_c("another\0example") == 7UL, "");
- }
- namespace test_rvalue_references
- {
- template < int N >
- struct answer
- {
- static constexpr int value = N;
- };
- answer<1> f(int&) { return answer<1>(); }
- answer<2> f(const int&) { return answer<2>(); }
- answer<3> f(int&&) { return answer<3>(); }
- void
- test()
- {
- int i = 0;
- const int c = 0;
- static_assert(decltype(f(i))::value == 1, "");
- static_assert(decltype(f(c))::value == 2, "");
- static_assert(decltype(f(0))::value == 3, "");
- }
- }
- namespace test_uniform_initialization
- {
- struct test
- {
- static const int zero {};
- static const int one {1};
- };
- static_assert(test::zero == 0, "");
- static_assert(test::one == 1, "");
- }
- namespace test_lambdas
- {
-
- void
- test1()
- {
- auto lambda1 = [](){};
- auto lambda2 = lambda1;
- lambda1();
- lambda2();
- }
-
- int
- test2()
- {
- auto a = [](int i, int j){ return i + j; }(1, 2);
- auto b = []() -> int { return '0'; }();
- auto c = [=](){ return a + b; }();
- auto d = [&](){ return c; }();
- auto e = [a, &b](int x) mutable {
- const auto identity = [](int y){ return y; };
- for (auto i = 0; i < a; ++i)
- a += b--;
- return x + identity(a + b);
- }(0);
- return a + b + c + d + e;
- }
-
- int
- test3()
- {
- const auto nullary = [](){ return 0; };
- const auto unary = [](int x){ return x; };
- using nullary_t = decltype(nullary);
- using unary_t = decltype(unary);
- const auto higher1st = [](nullary_t f){ return f(); };
- const auto higher2nd = [unary](nullary_t f1){
- return [unary, f1](unary_t f2){ return f2(unary(f1())); };
- };
- return higher1st(nullary) + higher2nd(nullary)(unary);
- }
-
- }
-
- namespace test_variadic_templates
- {
-
- template <int...>
- struct sum;
-
- template <int N0, int... N1toN>
- struct sum<N0, N1toN...>
- {
- static constexpr auto value = N0 + sum<N1toN...>::value;
- };
-
- template <>
- struct sum<>
- {
- static constexpr auto value = 0;
- };
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+ for ac_i in 1 2 3 4 5 6 7; do
+ ac_script="$ac_script$as_nl$ac_script"
+ done
+ echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+ { ac_script=; unset ac_script;}
+ if test -z "$SED"; then
+ ac_path_SED_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_SED" || continue
+# Check for GNU ac_path_SED and select it if it is found.
+ # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo '' >> "conftest.nl"
+ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_SED_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_SED="$ac_path_SED"
+ ac_path_SED_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
- static_assert(sum<>::value == 0, "");
- static_assert(sum<1>::value == 1, "");
- static_assert(sum<23>::value == 23, "");
- static_assert(sum<1, 2>::value == 3, "");
- static_assert(sum<5, 5, 11>::value == 21, "");
- static_assert(sum<2, 3, 5, 7, 11, 13>::value == 41, "");
+ $ac_path_SED_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_SED"; then
+ as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+ fi
+else
+ ac_cv_path_SED=$SED
+fi
- }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+ rm -f conftest.sed
- // http://stackoverflow.com/questions/13728184/template-aliases-and-sfinae
- // Clang 3.1 fails with headers of libstd++ 4.8.3 when using std::function
- // because of this.
- namespace test_template_alias_sfinae
- {
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
- struct foo {};
- template<typename T>
- using member = typename T::member_type;
- template<typename T>
- void func(...) {}
- template<typename T>
- void func(member<T>*) {}
- void test();
- void test() { func<foo>(0); }
- }
-} // namespace cxx11
-#endif // __cplusplus >= 201103L
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if ${ac_cv_path_FGREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+ then ac_cv_path_FGREP="$GREP -F"
+ else
+ if test -z "$FGREP"; then
+ ac_path_FGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in fgrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_FGREP" || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+ # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'FGREP' >> "conftest.nl"
+ "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_FGREP="$ac_path_FGREP"
+ ac_path_FGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
- ax_cv_cxx_compile_cxx11=yes
+ $ac_path_FGREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_FGREP"; then
+ as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
else
- ax_cv_cxx_compile_cxx11=no
+ ac_cv_path_FGREP=$FGREP
fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+ fi
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_cxx_compile_cxx11" >&5
-$as_echo "$ax_cv_cxx_compile_cxx11" >&6; }
- if test x$ax_cv_cxx_compile_cxx11 = xyes; then
- ac_success=yes
- fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
- if test x$ac_success = xno; then
- for alternative in ${ax_cxx_compile_alternatives}; do
- switch="-std=gnu++${alternative}"
- cachevar=`$as_echo "ax_cv_cxx_compile_cxx11_$switch" | $as_tr_sh`
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX supports C++11 features with $switch" >&5
-$as_echo_n "checking whether $CXX supports C++11 features with $switch... " >&6; }
-if eval \${$cachevar+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_save_CXX="$CXX"
- CXX="$CXX $switch"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
+test -z "$GREP" && GREP=grep
-// If the compiler admits that it is not ready for C++11, why torture it?
-// Hopefully, this will speed up the test.
-#ifndef __cplusplus
-#error "This is not a C++ compiler"
-#elif __cplusplus < 201103L
-#error "This is not a C++11 compiler"
-#else
-namespace cxx11
-{
- namespace test_static_assert
- {
- template <typename T>
- struct check
- {
- static_assert(sizeof(int) <= sizeof(T), "not big enough");
- };
- }
- namespace test_final_override
- {
- struct Base
- {
- virtual void f() {}
- };
- struct Derived : public Base
- {
- virtual void f() override {}
- };
- }
- namespace test_double_right_angle_brackets
- {
- template < typename T >
- struct check {};
- typedef check<void> single_type;
- typedef check<check<void>> double_type;
- typedef check<check<check<void>>> triple_type;
- typedef check<check<check<check<void>>>> quadruple_type;
- }
- namespace test_decltype
- {
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
- int
- f()
- {
- int a = 1;
- decltype(a) b = 2;
- return a + b;
- }
-
- }
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | ?:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$LD"; then
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break
+ ;;
+ *)
+ test "$with_gnu_ld" != yes && break
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
- namespace test_type_deduction
- {
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+ ;;
+*)
+ lt_cv_prog_gnu_ld=no
+ ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
- template < typename T1, typename T2 >
- struct is_same
- {
- static const bool value = false;
- };
- template < typename T >
- struct is_same<T, T>
- {
- static const bool value = true;
- };
- template < typename T1, typename T2 >
- auto
- add(T1 a1, T2 a2) -> decltype(a1 + a2)
- {
- return a1 + a2;
- }
- int
- test(const int c, volatile int v)
- {
- static_assert(is_same<int, decltype(0)>::value == true, "");
- static_assert(is_same<int, decltype(c)>::value == false, "");
- static_assert(is_same<int, decltype(v)>::value == false, "");
- auto ac = c;
- auto av = v;
- auto sumi = ac + av + 'x';
- auto sumf = ac + av + 1.0;
- static_assert(is_same<int, decltype(ac)>::value == true, "");
- static_assert(is_same<int, decltype(av)>::value == true, "");
- static_assert(is_same<int, decltype(sumi)>::value == true, "");
- static_assert(is_same<int, decltype(sumf)>::value == false, "");
- static_assert(is_same<int, decltype(add(c, v))>::value == true, "");
- return (sumf > 0.0) ? sumi : add(c, v);
- }
- }
- namespace test_noexcept
- {
- int f() { return 0; }
- int g() noexcept { return 0; }
- static_assert(noexcept(f()) == false, "");
- static_assert(noexcept(g()) == true, "");
- }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if ${lt_cv_path_NM+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$NM"; then
+ # Let the user override the nm to test.
+ lt_nm_to_check="$NM"
+ else
+ lt_nm_to_check="${ac_tool_prefix}nm"
+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+ lt_nm_to_check="$lt_nm_to_check nm"
+ fi
+ fi
+ for lt_tmp_nm in "$lt_nm_to_check"; do
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ # Strip out any user-provided options from the nm to test twice,
+ # the first time to test to see if nm (rather than its options) has
+ # an explicit path, the second time to yield a file which can be
+ # nm'ed itself.
+ tmp_nm_path="`$ECHO "$lt_tmp_nm" | sed 's, -.*$,,'`"
+ case "$tmp_nm_path" in
+ */*|*\\*) tmp_nm="$lt_tmp_nm";;
+ *) tmp_nm="$ac_dir/$lt_tmp_nm";;
+ esac
+ tmp_nm_to_nm="`$ECHO "$tmp_nm" | sed 's, -.*$,,'`"
+ if test -f "$tmp_nm_to_nm" || test -f "$tmp_nm_to_nm$ac_exeext" ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ case `"$tmp_nm" -B "$tmp_nm_to_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+ *$tmp_nm*) lt_cv_path_NM="$tmp_nm -B"
+ break
+ ;;
+ *)
+ case `"$tmp_nm" -p "$tmp_nm_to_nm" 2>&1 | grep -v '^ *$' | sed '1q'` in
+ *$tmp_nm*)
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ ;;
+ *)
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test "$lt_cv_path_NM" != "no"; then
+ NM="$lt_cv_path_NM"
+else
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+ if test -n "$DUMPBIN"; then :
+ # Let the user override the test.
+ else
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in dumpbin "link -dump"
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DUMPBIN+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DUMPBIN"; then
+ ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
- namespace test_constexpr
- {
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
- template < typename CharT >
- unsigned long constexpr
- strlen_c_r(const CharT *const s, const unsigned long acc) noexcept
- {
- return *s ? strlen_c_r(s + 1, acc + 1) : acc;
- }
- template < typename CharT >
- unsigned long constexpr
- strlen_c(const CharT *const s) noexcept
- {
- return strlen_c_r(s, 0UL);
- }
+ test -n "$DUMPBIN" && break
+ done
+fi
+if test -z "$DUMPBIN"; then
+ ac_ct_DUMPBIN=$DUMPBIN
+ for ac_prog in dumpbin "link -dump"
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DUMPBIN"; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
- static_assert(strlen_c("") == 0UL, "");
- static_assert(strlen_c("1") == 1UL, "");
- static_assert(strlen_c("example") == 7UL, "");
- static_assert(strlen_c("another\0example") == 7UL, "");
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
- }
- namespace test_rvalue_references
- {
+ test -n "$ac_ct_DUMPBIN" && break
+done
- template < int N >
- struct answer
- {
- static constexpr int value = N;
- };
+ if test "x$ac_ct_DUMPBIN" = x; then
+ DUMPBIN=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DUMPBIN=$ac_ct_DUMPBIN
+ fi
+fi
- answer<1> f(int&) { return answer<1>(); }
- answer<2> f(const int&) { return answer<2>(); }
- answer<3> f(int&&) { return answer<3>(); }
+ case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+ *COFF*)
+ DUMPBIN="$DUMPBIN -symbols"
+ ;;
+ *)
+ DUMPBIN=:
+ ;;
+ esac
+ fi
- void
- test()
- {
- int i = 0;
- const int c = 0;
- static_assert(decltype(f(i))::value == 1, "");
- static_assert(decltype(f(c))::value == 2, "");
- static_assert(decltype(f(0))::value == 3, "");
- }
+ if test "$DUMPBIN" != ":"; then
+ NM="$DUMPBIN"
+ fi
+fi
+test -z "$NM" && NM=nm
- }
- namespace test_uniform_initialization
- {
- struct test
- {
- static const int zero {};
- static const int one {1};
- };
- static_assert(test::zero == 0, "");
- static_assert(test::one == 1, "");
- }
- namespace test_lambdas
- {
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if ${lt_cv_nm_interface+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&5
+ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&5
+ (eval echo "\"\$as_me:$LINENO: output\"" >&5)
+ cat conftest.out >&5
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
+ fi
+ rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
- void
- test1()
- {
- auto lambda1 = [](){};
- auto lambda2 = lambda1;
- lambda1();
- lambda2();
- }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
- int
- test2()
- {
- auto a = [](int i, int j){ return i + j; }(1, 2);
- auto b = []() -> int { return '0'; }();
- auto c = [=](){ return a + b; }();
- auto d = [&](){ return c; }();
- auto e = [a, &b](int x) mutable {
- const auto identity = [](int y){ return y; };
- for (auto i = 0; i < a; ++i)
- a += b--;
- return x + identity(a + b);
- }(0);
- return a + b + c + d + e;
- }
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if ${lt_cv_sys_max_cmd_len+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ i=0
+ teststring="ABCD"
- int
- test3()
- {
- const auto nullary = [](){ return 0; };
- const auto unary = [](int x){ return x; };
- using nullary_t = decltype(nullary);
- using unary_t = decltype(unary);
- const auto higher1st = [](nullary_t f){ return f(); };
- const auto higher2nd = [unary](nullary_t f1){
- return [unary, f1](unary_t f2){ return f2(unary(f1())); };
- };
- return higher1st(nullary) + higher2nd(nullary)(unary);
- }
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
- }
+ gnu*)
+ # Under GNU Hurd, this test is not required because there is
+ # no limit to the length of command line arguments.
+ # Libtool will interpret -1 as no limit whatsoever
+ lt_cv_sys_max_cmd_len=-1;
+ ;;
- namespace test_variadic_templates
- {
+ cygwin* | mingw* | cegcc*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
- template <int...>
- struct sum;
+ mint*)
+ # On MiNT this can take a long time and run out of memory.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
- template <int N0, int... N1toN>
- struct sum<N0, N1toN...>
- {
- static constexpr auto value = N0 + sum<N1toN...>::value;
- };
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
- template <>
- struct sum<>
- {
- static constexpr auto value = 0;
- };
+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
- static_assert(sum<>::value == 0, "");
- static_assert(sum<1>::value == 1, "");
- static_assert(sum<23>::value == 23, "");
- static_assert(sum<1, 2>::value == 3, "");
- static_assert(sum<5, 5, 11>::value == 21, "");
- static_assert(sum<2, 3, 5, 7, 11, 13>::value == 41, "");
+ interix*)
+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
+ lt_cv_sys_max_cmd_len=196608
+ ;;
- }
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
+ esac
+ fi
+ ;;
+ sco3.2v5*)
+ lt_cv_sys_max_cmd_len=102400
+ ;;
+ sysv5* | sco5v6* | sysv4.2uw2*)
+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+ if test -n "$kargmax"; then
+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
+ else
+ lt_cv_sys_max_cmd_len=32768
+ fi
+ ;;
+ *)
+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+ if test -n "$lt_cv_sys_max_cmd_len"; then
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ else
+ # Make teststring a little bigger before we do anything with it.
+ # a 1K string should be a reasonable start.
+ for i in 1 2 3 4 5 6 7 8 ; do
+ teststring=$teststring$teststring
+ done
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \
+ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ # Only check the string length outside the loop.
+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on
+ # massive amounts of additional arguments before passing them to the
+ # linker. It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ fi
+ ;;
+ esac
- // http://stackoverflow.com/questions/13728184/template-aliases-and-sfinae
- // Clang 3.1 fails with headers of libstd++ 4.8.3 when using std::function
- // because of this.
- namespace test_template_alias_sfinae
- {
+fi
- struct foo {};
+if test -n $lt_cv_sys_max_cmd_len ; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
- template<typename T>
- using member = typename T::member_type;
- template<typename T>
- void func(...) {}
- template<typename T>
- void func(member<T>*) {}
- void test();
- void test() { func<foo>(0); }
- }
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
-} // namespace cxx11
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+ test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+ = c,a/b,, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
+$as_echo "$xsi_shell" >&6; }
-#endif // __cplusplus >= 201103L
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+ >/dev/null 2>&1 \
+ && lt_shell_append=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
+$as_echo "$lt_shell_append" >&6; }
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
- eval $cachevar=yes
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ lt_unset=unset
else
- eval $cachevar=no
+ lt_unset=false
fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- CXX="$ac_save_CXX"
-fi
-eval ac_res=\$$cachevar
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- if eval test x\$$cachevar = xyes; then
- CXX_DIALECT="$switch"
- CXX="$CXX $switch"
- if test -n "$CXXCPP" ; then
- CXXCPP="$CXXCPP $switch"
- fi
- ac_success=yes
- break
- fi
- done
- fi
-
- if test x$ac_success = xno; then
- for alternative in ${ax_cxx_compile_alternatives}; do
- for switch in -std=c++${alternative} +std=c++${alternative} "-h std=c++${alternative}"; do
- cachevar=`$as_echo "ax_cv_cxx_compile_cxx11_$switch" | $as_tr_sh`
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX supports C++11 features with $switch" >&5
-$as_echo_n "checking whether $CXX supports C++11 features with $switch... " >&6; }
-if eval \${$cachevar+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_save_CXX="$CXX"
- CXX="$CXX $switch"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-// If the compiler admits that it is not ready for C++11, why torture it?
-// Hopefully, this will speed up the test.
-#ifndef __cplusplus
-#error "This is not a C++ compiler"
-#elif __cplusplus < 201103L
-#error "This is not a C++11 compiler"
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ lt_SP2NL='tr \040 \012'
+ lt_NL2SP='tr \015\012 \040\040'
+ ;;
+ *) # EBCDIC based system
+ lt_SP2NL='tr \100 \n'
+ lt_NL2SP='tr \r\n \100\100'
+ ;;
+esac
-#else
-namespace cxx11
-{
- namespace test_static_assert
- {
- template <typename T>
- struct check
- {
- static_assert(sizeof(int) <= sizeof(T), "not big enough");
- };
- }
- namespace test_final_override
- {
- struct Base
- {
- virtual void f() {}
- };
- struct Derived : public Base
- {
- virtual void f() override {}
- };
- }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if ${lt_cv_ld_reload_flag+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ else
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+ ;;
+esac
- namespace test_double_right_angle_brackets
- {
- template < typename T >
- struct check {};
- typedef check<void> single_type;
- typedef check<check<void>> double_type;
- typedef check<check<check<void>>> triple_type;
- typedef check<check<check<check<void>>>> quadruple_type;
- }
- namespace test_decltype
- {
- int
- f()
- {
- int a = 1;
- decltype(a) b = 2;
- return a + b;
- }
- }
- namespace test_type_deduction
- {
- template < typename T1, typename T2 >
- struct is_same
- {
- static const bool value = false;
- };
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OBJDUMP"; then
+ ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
- template < typename T >
- struct is_same<T, T>
- {
- static const bool value = true;
- };
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
- template < typename T1, typename T2 >
- auto
- add(T1 a1, T2 a2) -> decltype(a1 + a2)
- {
- return a1 + a2;
- }
- int
- test(const int c, volatile int v)
- {
- static_assert(is_same<int, decltype(0)>::value == true, "");
- static_assert(is_same<int, decltype(c)>::value == false, "");
- static_assert(is_same<int, decltype(v)>::value == false, "");
- auto ac = c;
- auto av = v;
- auto sumi = ac + av + 'x';
- auto sumf = ac + av + 1.0;
- static_assert(is_same<int, decltype(ac)>::value == true, "");
- static_assert(is_same<int, decltype(av)>::value == true, "");
- static_assert(is_same<int, decltype(sumi)>::value == true, "");
- static_assert(is_same<int, decltype(sumf)>::value == false, "");
- static_assert(is_same<int, decltype(add(c, v))>::value == true, "");
- return (sumf > 0.0) ? sumi : add(c, v);
- }
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+ ac_ct_OBJDUMP=$OBJDUMP
+ # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OBJDUMP"; then
+ ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_OBJDUMP="objdump"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
- }
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
- namespace test_noexcept
- {
+ if test "x$ac_ct_OBJDUMP" = x; then
+ OBJDUMP="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OBJDUMP=$ac_ct_OBJDUMP
+ fi
+else
+ OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
- int f() { return 0; }
- int g() noexcept { return 0; }
+test -z "$OBJDUMP" && OBJDUMP=objdump
- static_assert(noexcept(f()) == false, "");
- static_assert(noexcept(g()) == true, "");
- }
- namespace test_constexpr
- {
- template < typename CharT >
- unsigned long constexpr
- strlen_c_r(const CharT *const s, const unsigned long acc) noexcept
- {
- return *s ? strlen_c_r(s + 1, acc + 1) : acc;
- }
- template < typename CharT >
- unsigned long constexpr
- strlen_c(const CharT *const s) noexcept
- {
- return strlen_c_r(s, 0UL);
- }
- static_assert(strlen_c("") == 0UL, "");
- static_assert(strlen_c("1") == 1UL, "");
- static_assert(strlen_c("example") == 7UL, "");
- static_assert(strlen_c("another\0example") == 7UL, "");
- }
- namespace test_rvalue_references
- {
- template < int N >
- struct answer
- {
- static constexpr int value = N;
- };
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if ${lt_cv_deplibs_check_method+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
- answer<1> f(int&) { return answer<1>(); }
- answer<2> f(const int&) { return answer<2>(); }
- answer<3> f(int&&) { return answer<3>(); }
+case $host_os in
+aix[4-9]*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
- void
- test()
- {
- int i = 0;
- const int c = 0;
- static_assert(decltype(f(i))::value == 1, "");
- static_assert(decltype(f(c))::value == 2, "");
- static_assert(decltype(f(0))::value == 3, "");
- }
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
- }
+bsdi[45]*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
- namespace test_uniform_initialization
- {
+cygwin*)
+ # func_win32_libid is a shell function defined in ltmain.sh
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ ;;
- struct test
- {
- static const int zero {};
- static const int one {1};
- };
+mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+ # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+ if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
- static_assert(test::zero == 0, "");
- static_assert(test::one == 1, "");
+cegcc*)
+ # use the weaker test based on 'objdump'. See mingw*.
+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
- }
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
- namespace test_lambdas
- {
+freebsd* | dragonfly*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
- void
- test1()
- {
- auto lambda1 = [](){};
- auto lambda2 = lambda1;
- lambda1();
- lambda2();
- }
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
- int
- test2()
- {
- auto a = [](int i, int j){ return i + j; }(1, 2);
- auto b = []() -> int { return '0'; }();
- auto c = [=](){ return a + b; }();
- auto d = [&](){ return c; }();
- auto e = [a, &b](int x) mutable {
- const auto identity = [](int y){ return y; };
- for (auto i = 0; i < a; ++i)
- a += b--;
- return x + identity(a + b);
- }(0);
- return a + b + c + d + e;
- }
+haiku*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
- int
- test3()
- {
- const auto nullary = [](){ return 0; };
- const auto unary = [](int x){ return x; };
- using nullary_t = decltype(nullary);
- using unary_t = decltype(unary);
- const auto higher1st = [](nullary_t f){ return f(); };
- const auto higher2nd = [unary](nullary_t f1){
- return [unary, f1](unary_t f2){ return f2(unary(f1())); };
- };
- return higher1st(nullary) + higher2nd(nullary)(unary);
- }
+hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case $host_cpu in
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
+ ;;
- }
+interix[3-9]*)
+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+ ;;
- namespace test_variadic_templates
- {
+irix5* | irix6* | nonstopux*)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ lt_cv_deplibs_check_method=pass_all
+ ;;
- template <int...>
- struct sum;
+# This must be Linux ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
- template <int N0, int... N1toN>
- struct sum<N0, N1toN...>
- {
- static constexpr auto value = N0 + sum<N1toN...>::value;
- };
+netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+ fi
+ ;;
- template <>
- struct sum<>
- {
- static constexpr auto value = 0;
- };
+newos6*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
- static_assert(sum<>::value == 0, "");
- static_assert(sum<1>::value == 1, "");
- static_assert(sum<23>::value == 23, "");
- static_assert(sum<1, 2>::value == 3, "");
- static_assert(sum<5, 5, 11>::value == 21, "");
- static_assert(sum<2, 3, 5, 7, 11, 13>::value == 41, "");
+*nto* | *qnx*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
- }
+openbsd*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ fi
+ ;;
- // http://stackoverflow.com/questions/13728184/template-aliases-and-sfinae
- // Clang 3.1 fails with headers of libstd++ 4.8.3 when using std::function
- // because of this.
- namespace test_template_alias_sfinae
- {
+osf3* | osf4* | osf5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
- struct foo {};
+rdos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
- template<typename T>
- using member = typename T::member_type;
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
- template<typename T>
- void func(...) {}
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
- template<typename T>
- void func(member<T>*) {}
+sysv4 | sysv4.3*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ pc)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ esac
+ ;;
- void test();
+tpf*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+esac
- void test() { func<foo>(0); }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
- }
-} // namespace cxx11
-#endif // __cplusplus >= 201103L
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
- eval $cachevar=yes
-else
- eval $cachevar=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- CXX="$ac_save_CXX"
-fi
-eval ac_res=\$$cachevar
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- if eval test x\$$cachevar = xyes; then
- CXX_DIALECT="$switch"
- CXX="$CXX $switch"
- if test -n "$CXXCPP" ; then
- CXXCPP="$CXXCPP $switch"
- fi
- ac_success=yes
- break
- fi
- done
- if test x$ac_success = xyes; then
- break
- fi
- done
- fi
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
- if test x$ax_cxx_compile_cxx11_required = xtrue; then
- if test x$ac_success = xno; then
- as_fn_error $? "*** A compiler with support for C++11 language features is required." "$LINENO" 5
- fi
- fi
- if test x$ac_success = xno; then
- HAVE_CXX11=0
- { $as_echo "$as_me:${as_lineno-$LINENO}: No compiler with C++11 support was found" >&5
-$as_echo "$as_me: No compiler with C++11 support was found" >&6;}
- else
- HAVE_CXX11=1
-$as_echo "#define HAVE_CXX11 1" >>confdefs.h
- fi
+plugin_option=
+plugin_names="liblto_plugin.so liblto_plugin-0.dll cyglto_plugin-0.dll"
+for plugin in $plugin_names; do
+ plugin_so=`${CC} ${CFLAGS} --print-prog-name $plugin`
+ if test x$plugin_so = x$plugin; then
+ plugin_so=`${CC} ${CFLAGS} --print-file-name $plugin`
+ fi
+ if test x$plugin_so != x$plugin; then
+ plugin_option="--plugin $plugin_so"
+ break
+ fi
+done
-# Dependency checking.
-rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-
-DEPDIR="${am__leading_dot}deps"
-
-ac_config_commands="$ac_config_commands depdir"
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR="${ac_tool_prefix}ar"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
-depcc="$CC" am_compiler_list=
-am_depcomp=$ac_aux_dir/depcomp
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
-$as_echo_n "checking dependency style of $depcc... " >&6; }
-if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+fi
+if test -z "$ac_cv_prog_AR"; then
+ ac_ct_AR=$AR
+ # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_CC_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_AR="ar"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
fi
- for depmode in $am_compiler_list; do
- if test $depmode = none; then break; fi
-
- $as_echo "$as_me:$LINENO: trying $depmode" >&5
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
- done
- echo "include sub/conftest.Po" > confmf
-
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
- depcmd="depmode=$depmode \
- source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c"
- echo "| $depcmd" | sed -e 's/ */ /g' >&5
- if env $depcmd > conftest.err 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po >>conftest.err 2>&1 &&
- grep sub/conftest.${OBJEXT-o} sub/conftest.Po >>conftest.err 2>&1 &&
- ${MAKE-make} -s -f confmf >>conftest.err 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_CC_dependencies_compiler_type=$depmode
- $as_echo "$as_me:$LINENO: success" >&5
- break
- fi
- fi
- $as_echo "$as_me:$LINENO: failure, diagnostics are:" >&5
- sed -e 's/^/| /' < conftest.err >&5
+done
done
+IFS=$as_save_IFS
- cd ..
- rm -rf conftest.dir
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
else
- am_cv_CC_dependencies_compiler_type=none
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
fi
+ if test "x$ac_ct_AR" = x; then
+ AR="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ AR=$ac_ct_AR
+ fi
+else
+ AR="$ac_cv_prog_AR"
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
-$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
-if test x${am_cv_CC_dependencies_compiler_type-none} = xnone
-then as_fn_error $? "no usable dependency style found" "$LINENO" 5
-else CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+test -z "$AR" && AR=ar
+if test -n "$plugin_option"; then
+ if $AR --help 2>&1 | grep -q "\--plugin"; then
+ touch conftest.c
+ $AR $plugin_option rc conftest.a conftest.c
+ if test "$?" != 0; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Failed: $AR $plugin_option rc" >&5
+$as_echo "$as_me: WARNING: Failed: $AR $plugin_option rc" >&2;}
+ else
+ AR="$AR $plugin_option"
+ fi
+ rm -f conftest.*
+ fi
fi
+test -z "$AR_FLAGS" && AR_FLAGS=cru
-CONFIG_OBS=
-CONFIG_DEPS=
-CONFIG_SRCS=
-ENABLE_CFLAGS=
-CONFIG_ALL=
-CONFIG_CLEAN=
-CONFIG_INSTALL=
-CONFIG_UNINSTALL=
-# If we haven't got the data from the intl directory,
-# assume NLS is disabled.
-USE_NLS=no
-LIBINTL=
-LIBINTL_DEP=
-INCINTL=
-XGETTEXT=
-GMSGFMT=
-POSUB=
-if test -f ../intl/config.intl; then
- . ../intl/config.intl
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5
-$as_echo_n "checking whether NLS is requested... " >&6; }
-if test x"$USE_NLS" != xyes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-$as_echo "#define ENABLE_NLS 1" >>confdefs.h
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for catalogs to be installed" >&5
-$as_echo_n "checking for catalogs to be installed... " >&6; }
- # Look for .po and .gmo files in the source directory.
- CATALOGS=
- XLINGUAS=
- for cat in $srcdir/po/*.gmo $srcdir/po/*.po; do
- # If there aren't any .gmo files the shell will give us the
- # literal string "../path/to/srcdir/po/*.gmo" which has to be
- # weeded out.
- case "$cat" in *\**)
- continue;;
- esac
- # The quadruple backslash is collapsed to a double backslash
- # by the backticks, then collapsed again by the double quotes,
- # leaving us with one backslash in the sed expression (right
- # before the dot that mustn't act as a wildcard).
- cat=`echo $cat | sed -e "s!$srcdir/po/!!" -e "s!\\\\.po!.gmo!"`
- lang=`echo $cat | sed -e "s!\\\\.gmo!!"`
- # The user is allowed to set LINGUAS to a list of languages to
- # install catalogs for. If it's empty that means "all of them."
- if test "x$LINGUAS" = x; then
- CATALOGS="$CATALOGS $cat"
- XLINGUAS="$XLINGUAS $lang"
- else
- case "$LINGUAS" in *$lang*)
- CATALOGS="$CATALOGS $cat"
- XLINGUAS="$XLINGUAS $lang"
- ;;
- esac
- fi
- done
- LINGUAS="$XLINGUAS"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LINGUAS" >&5
-$as_echo "$LINGUAS" >&6; }
-
-
- DATADIRNAME=share
-
- INSTOBJEXT=.mo
- GENCAT=gencat
- CATOBJEXT=.gmo
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
-localedir='${datadir}/locale'
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
-if test x"$USE_NLS" = xyes; then
- CONFIG_ALL="$CONFIG_ALL all-po"
- CONFIG_CLEAN="$CONFIG_CLEAN clean-po"
- CONFIG_INSTALL="$CONFIG_INSTALL install-po"
- CONFIG_UNINSTALL="$CONFIG_UNINSTALL uninstall-po"
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
fi
-PACKAGE=gdb
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE "$PACKAGE"
-_ACEOF
+test -z "$STRIP" && STRIP=:
-# We never need to detect it in this sub-configure.
-# But preserve it for config.status --recheck.
-MAKEINFO_EXTRA_FLAGS=""
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $MAKEINFO supports @click" >&5
-$as_echo_n "checking whether $MAKEINFO supports @click... " >&6; }
-if ${gdb_cv_have_makeinfo_click+:} false; then :
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
$as_echo_n "(cached) " >&6
else
- echo '@clicksequence{a @click{} b}' >conftest.texinfo
- if eval "$MAKEINFO conftest.texinfo >&5 2>&5"; then
- gdb_cv_have_makeinfo_click=yes
- else
- gdb_cv_have_makeinfo_click=no
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
fi
+done
+ done
+IFS=$as_save_IFS
+
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gdb_cv_have_makeinfo_click" >&5
-$as_echo "$gdb_cv_have_makeinfo_click" >&6; }
-if test x"$gdb_cv_have_makeinfo_click" = xyes; then
- MAKEINFO_EXTRA_FLAGS="$MAKEINFO_EXTRA_FLAGS -DHAVE_MAKEINFO_CLICK"
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
fi
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
-# Check whether --with-separate-debug-dir was given.
-if test "${with_separate_debug_dir+set}" = set; then :
- withval=$with_separate_debug_dir;
- DEBUGDIR=$withval
+ if test "x$ac_ct_RANLIB" = x; then
+ RANLIB=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ RANLIB=$ac_ct_RANLIB
+ fi
else
- DEBUGDIR=${libdir}/debug
+ RANLIB="$ac_cv_prog_RANLIB"
fi
+test -z "$RANLIB" && RANLIB=:
+if test -n "$plugin_option" && test "$RANLIB" != ":"; then
+ if $RANLIB --help 2>&1 | grep -q "\--plugin"; then
+ RANLIB="$RANLIB $plugin_option"
+ fi
+fi
- test "x$prefix" = xNONE && prefix="$ac_default_prefix"
- test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
- ac_define_dir=`eval echo $DEBUGDIR`
- ac_define_dir=`eval echo $ac_define_dir`
-cat >>confdefs.h <<_ACEOF
-#define DEBUGDIR "$ac_define_dir"
-_ACEOF
- if test "x$exec_prefix" = xNONE || test "x$exec_prefix" = 'x${prefix}'; then
- if test "x$prefix" = xNONE; then
- test_prefix=/usr/local
- else
- test_prefix=$prefix
- fi
- else
- test_prefix=$exec_prefix
- fi
- value=0
- case ${ac_define_dir} in
- "${test_prefix}"|"${test_prefix}/"*|\
- '${exec_prefix}'|'${exec_prefix}/'*)
- value=1
- ;;
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+ case $host_os in
+ openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+ ;;
+ *)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+ ;;
esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
-cat >>confdefs.h <<_ACEOF
-#define DEBUGDIR_RELOCATABLE $value
-_ACEOF
+case $host_os in
+ darwin*)
+ lock_old_archive_extraction=yes ;;
+ *)
+ lock_old_archive_extraction=no ;;
+esac
-# We can't pass paths as command line arguments.
-# Mingw32 tries to be clever and will convert the paths for us.
-# For example -DBINDIR="/usr/local/bin" passed on the command line may get
-# converted to -DBINDIR="E:/msys/mingw32/msys/1.0/local/bin".
-# This breaks GDB's relocatable path conversions since paths passed in
-# config.h would not get so translated, the path prefixes no longer match.
- test "x$prefix" = xNONE && prefix="$ac_default_prefix"
- test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
- ac_define_dir=`eval echo $bindir`
- ac_define_dir=`eval echo $ac_define_dir`
-cat >>confdefs.h <<_ACEOF
-#define BINDIR "$ac_define_dir"
-_ACEOF
-# GDB's datadir relocation
-# Check whether --with-gdb-datadir was given.
-if test "${with_gdb_datadir+set}" = set; then :
- withval=$with_gdb_datadir;
- GDB_DATADIR=$withval
-else
- GDB_DATADIR=${datadir}/gdb
-fi
- test "x$prefix" = xNONE && prefix="$ac_default_prefix"
- test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
- ac_define_dir=`eval echo $GDB_DATADIR`
- ac_define_dir=`eval echo $ac_define_dir`
-cat >>confdefs.h <<_ACEOF
-#define GDB_DATADIR "$ac_define_dir"
-_ACEOF
- if test "x$exec_prefix" = xNONE || test "x$exec_prefix" = 'x${prefix}'; then
- if test "x$prefix" = xNONE; then
- test_prefix=/usr/local
- else
- test_prefix=$prefix
- fi
- else
- test_prefix=$exec_prefix
+
+
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AWK="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
fi
- value=0
- case ${ac_define_dir} in
- "${test_prefix}"|"${test_prefix}/"*|\
- '${exec_prefix}'|'${exec_prefix}/'*)
- value=1
- ;;
- esac
+done
+ done
+IFS=$as_save_IFS
-cat >>confdefs.h <<_ACEOF
-#define GDB_DATADIR_RELOCATABLE $value
-_ACEOF
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+ test -n "$AWK" && break
+done
-# Check whether --with-relocated-sources was given.
-if test "${with_relocated_sources+set}" = set; then :
- withval=$with_relocated_sources; reloc_srcdir="${withval}"
- test "x$prefix" = xNONE && prefix="$ac_default_prefix"
- test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
- ac_define_dir=`eval echo $reloc_srcdir`
- ac_define_dir=`eval echo $ac_define_dir`
-cat >>confdefs.h <<_ACEOF
-#define RELOC_SRCDIR "$ac_define_dir"
-_ACEOF
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for default auto-load directory" >&5
-$as_echo_n "checking for default auto-load directory... " >&6; }
-# Check whether --with-auto-load-dir was given.
-if test "${with_auto_load_dir+set}" = set; then :
- withval=$with_auto_load_dir;
-else
- with_auto_load_dir='$debugdir:$datadir/auto-load'
-fi
-escape_dir=`echo $with_auto_load_dir | sed -e 's/[$]datadir\>/\\\\\\\\\\\\&/g' -e 's/[$]debugdir\>/\\\\\\\\\\\\&/g'`
- test "x$prefix" = xNONE && prefix="$ac_default_prefix"
- test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
- ac_define_dir=`eval echo $escape_dir`
- ac_define_dir=`eval echo $ac_define_dir`
-cat >>confdefs.h <<_ACEOF
-#define AUTO_LOAD_DIR "$ac_define_dir"
-_ACEOF
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_auto_load_dir" >&5
-$as_echo "$with_auto_load_dir" >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for default auto-load safe-path" >&5
-$as_echo_n "checking for default auto-load safe-path... " >&6; }
-# Check whether --with-auto-load-safe-path was given.
-if test "${with_auto_load_safe_path+set}" = set; then :
- withval=$with_auto_load_safe_path; if test "$with_auto_load_safe_path" = "no"; then
- with_auto_load_safe_path="/"
- fi
-else
- with_auto_load_safe_path="$with_auto_load_dir"
-fi
-escape_dir=`echo $with_auto_load_safe_path | sed -e 's/[$]datadir\>/\\\\\\\\\\\\&/g' -e 's/[$]debugdir\>/\\\\\\\\\\\\&/g'`
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
- test "x$prefix" = xNONE && prefix="$ac_default_prefix"
- test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
- ac_define_dir=`eval echo $escape_dir`
- ac_define_dir=`eval echo $ac_define_dir`
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-cat >>confdefs.h <<_ACEOF
-#define AUTO_LOAD_SAFE_PATH "$ac_define_dir"
-_ACEOF
+# Allow CC to be a program name with arguments.
+compiler=$CC
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_auto_load_safe_path" >&5
-$as_echo "$with_auto_load_safe_path" >&6; }
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
-subdirs="$subdirs testsuite"
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[BCDT]'
+ ;;
+cygwin* | mingw* | pw32* | cegcc*)
+ symcode='[ABCDGISTW]'
+ ;;
+hpux*)
+ if test "$host_cpu" = ia64; then
+ symcode='[ABCDEGRST]'
+ fi
+ ;;
+irix* | nonstopux*)
+ symcode='[BCDEGRST]'
+ ;;
+osf*)
+ symcode='[BCDEGQRST]'
+ ;;
+solaris*)
+ symcode='[BCDRT]'
+ ;;
+sco3.2v5*)
+ symcode='[DT]'
+ ;;
+sysv4.2uw2*)
+ symcode='[DT]'
+ ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+ symcode='[ABDT]'
+ ;;
+sysv4)
+ symcode='[DFNSTU]'
+ ;;
+esac
-# Check whether to support alternative target configurations
-# Check whether --enable-targets wa[...]
[diff truncated at 100000 bytes]
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2022-11-07 15:50 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-11-07 15:50 [binutils-gdb] gdb: link executables with libtool Jose E. Marchesi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).