From: Tom Tromey <tom@tromey.com>
To: gdb-patches@sourceware.org
Cc: Tom Tromey <tom@tromey.com>
Subject: [PATCH 04/46] Use require supports_reverse
Date: Fri, 16 Dec 2022 17:07:36 -0700 [thread overview]
Message-ID: <20221217000818.3729389-5-tom@tromey.com> (raw)
In-Reply-To: <20221217000818.3729389-1-tom@tromey.com>
This changes some tests to use "require supports_reverse".
---
gdb/testsuite/gdb.mi/mi-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/amd64-tailcall-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/break-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/consecutive-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/finish-precsave.exp | 4 +---
gdb/testsuite/gdb.reverse/finish-reverse-bkpt.exp | 4 +---
gdb/testsuite/gdb.reverse/finish-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/fstatat-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/getrandom.exp | 4 +---
gdb/testsuite/gdb.reverse/getresuid-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/i386-reverse.exp | 5 +----
gdb/testsuite/gdb.reverse/i386-sse-reverse.exp | 5 +----
gdb/testsuite/gdb.reverse/insn-reverse.exp | 7 +------
gdb/testsuite/gdb.reverse/machinestate.exp | 4 +---
gdb/testsuite/gdb.reverse/next-reverse-bkpt-over-sr.exp | 4 +---
gdb/testsuite/gdb.reverse/pipe-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/readv-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/recvmsg-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/rerun-prec.exp | 4 +---
gdb/testsuite/gdb.reverse/s390-mvcle.exp | 4 +---
gdb/testsuite/gdb.reverse/sigall-precsave.exp | 5 +----
gdb/testsuite/gdb.reverse/sigall-reverse.exp | 5 +----
gdb/testsuite/gdb.reverse/singlejmp-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/solib-reverse.exp | 7 +------
gdb/testsuite/gdb.reverse/step-indirect-call-thunk.exp | 5 +----
gdb/testsuite/gdb.reverse/step-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/time-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/until-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/waitpid-reverse.exp | 4 +---
gdb/testsuite/gdb.reverse/watch-reverse.exp | 4 +---
30 files changed, 30 insertions(+), 101 deletions(-)
diff --git a/gdb/testsuite/gdb.mi/mi-reverse.exp b/gdb/testsuite/gdb.mi/mi-reverse.exp
index 9913206eba9..99704dda75e 100644
--- a/gdb/testsuite/gdb.mi/mi-reverse.exp
+++ b/gdb/testsuite/gdb.mi/mi-reverse.exp
@@ -27,9 +27,7 @@
# but to verify the correct output response to MI operations.
#
-if ![supports_reverse] {
- return
-}
+require supports_reverse
load_lib mi-support.exp
set MIFLAGS "-i=mi"
diff --git a/gdb/testsuite/gdb.reverse/amd64-tailcall-reverse.exp b/gdb/testsuite/gdb.reverse/amd64-tailcall-reverse.exp
index 7bb797d90d3..129b08db400 100644
--- a/gdb/testsuite/gdb.reverse/amd64-tailcall-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/amd64-tailcall-reverse.exp
@@ -13,9 +13,7 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-if ![supports_reverse] {
- return
-}
+require supports_reverse
set opts {}
standard_testfile .S
diff --git a/gdb/testsuite/gdb.reverse/break-reverse.exp b/gdb/testsuite/gdb.reverse/break-reverse.exp
index 29861cd2eba..13459b08f1f 100644
--- a/gdb/testsuite/gdb.reverse/break-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/break-reverse.exp
@@ -16,9 +16,7 @@
# This file is part of the GDB testsuite. It tests reverse debugging
# with breakpoints.
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/consecutive-reverse.exp b/gdb/testsuite/gdb.reverse/consecutive-reverse.exp
index 99d83328feb..38d8c2f1cfa 100644
--- a/gdb/testsuite/gdb.reverse/consecutive-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/consecutive-reverse.exp
@@ -16,9 +16,7 @@
# This file is part of the GDB testsuite. It tests stepping over
# consecutive instructions in reverse.
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/finish-precsave.exp b/gdb/testsuite/gdb.reverse/finish-precsave.exp
index 0bf2a7b1ba3..7d31aae5bd2 100644
--- a/gdb/testsuite/gdb.reverse/finish-precsave.exp
+++ b/gdb/testsuite/gdb.reverse/finish-precsave.exp
@@ -16,9 +16,7 @@
# This file is part of the GDB testsuite. It tests 'finish' with
# reverse debugging.
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile finish-reverse.c
set precsave [standard_output_file finish.precsave]
diff --git a/gdb/testsuite/gdb.reverse/finish-reverse-bkpt.exp b/gdb/testsuite/gdb.reverse/finish-reverse-bkpt.exp
index 3d98178a4c3..f74154a1044 100644
--- a/gdb/testsuite/gdb.reverse/finish-reverse-bkpt.exp
+++ b/gdb/testsuite/gdb.reverse/finish-reverse-bkpt.exp
@@ -40,9 +40,7 @@
# addition to non-PowerPC systems. On non-PowerPC systems, the GEP and LEP
# are the same.
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/finish-reverse.exp b/gdb/testsuite/gdb.reverse/finish-reverse.exp
index 703423f176e..8655403bcd6 100644
--- a/gdb/testsuite/gdb.reverse/finish-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/finish-reverse.exp
@@ -16,9 +16,7 @@
# This file is part of the GDB testsuite. It tests 'finish' with
# reverse debugging.
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/fstatat-reverse.exp b/gdb/testsuite/gdb.reverse/fstatat-reverse.exp
index 10d7024f3cb..abfb3838c91 100644
--- a/gdb/testsuite/gdb.reverse/fstatat-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/fstatat-reverse.exp
@@ -19,9 +19,7 @@
# This test tests fstatat syscall for reverse execution.
#
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/getrandom.exp b/gdb/testsuite/gdb.reverse/getrandom.exp
index b1c7d9dad80..a13eff75116 100644
--- a/gdb/testsuite/gdb.reverse/getrandom.exp
+++ b/gdb/testsuite/gdb.reverse/getrandom.exp
@@ -19,9 +19,7 @@
# This test tests getrandom syscall for reverse execution.
#
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/getresuid-reverse.exp b/gdb/testsuite/gdb.reverse/getresuid-reverse.exp
index a44f2705a3d..fbff31a590a 100644
--- a/gdb/testsuite/gdb.reverse/getresuid-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/getresuid-reverse.exp
@@ -19,9 +19,7 @@
# This test tests getresuid/getresgid syscalls for reverse execution.
#
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/i386-reverse.exp b/gdb/testsuite/gdb.reverse/i386-reverse.exp
index 6f6458c776e..85b6eaefccc 100644
--- a/gdb/testsuite/gdb.reverse/i386-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/i386-reverse.exp
@@ -19,10 +19,7 @@
# This test tests some i386 general instructions for reverse execution.
#
-if ![supports_reverse] {
- return
-}
-
+require supports_reverse
if {![is_x86_like_target]} {
verbose "Skipping i386 reverse tests."
diff --git a/gdb/testsuite/gdb.reverse/i386-sse-reverse.exp b/gdb/testsuite/gdb.reverse/i386-sse-reverse.exp
index ac56cd4e50d..84b1b5ea615 100644
--- a/gdb/testsuite/gdb.reverse/i386-sse-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/i386-sse-reverse.exp
@@ -19,10 +19,7 @@
# This test tests some i386 general instructions for reverse execution.
#
-if ![supports_reverse] {
- return
-}
-
+require supports_reverse
if {![istarget "*86*-*linux*"]} {
verbose "Skipping i386 reverse tests."
diff --git a/gdb/testsuite/gdb.reverse/insn-reverse.exp b/gdb/testsuite/gdb.reverse/insn-reverse.exp
index e16866e1433..f74f6922719 100644
--- a/gdb/testsuite/gdb.reverse/insn-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/insn-reverse.exp
@@ -13,12 +13,7 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-if ![supports_reverse] {
- return
-}
-
-# Check if start command is supported.
-require !use_gdb_stub
+require supports_reverse !use_gdb_stub
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/machinestate.exp b/gdb/testsuite/gdb.reverse/machinestate.exp
index e33be3dbfed..deef00d0428 100644
--- a/gdb/testsuite/gdb.reverse/machinestate.exp
+++ b/gdb/testsuite/gdb.reverse/machinestate.exp
@@ -35,9 +35,7 @@
# Test forward replay
#
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile .c ms1.c
diff --git a/gdb/testsuite/gdb.reverse/next-reverse-bkpt-over-sr.exp b/gdb/testsuite/gdb.reverse/next-reverse-bkpt-over-sr.exp
index b8364e237b4..60f53f8f46d 100644
--- a/gdb/testsuite/gdb.reverse/next-reverse-bkpt-over-sr.exp
+++ b/gdb/testsuite/gdb.reverse/next-reverse-bkpt-over-sr.exp
@@ -40,9 +40,7 @@
# addition to non-PowerPC systems. On non-PowerPC systems, the GEP and LEP
# are the same.
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/pipe-reverse.exp b/gdb/testsuite/gdb.reverse/pipe-reverse.exp
index a3dafc0347a..45b249b4064 100644
--- a/gdb/testsuite/gdb.reverse/pipe-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/pipe-reverse.exp
@@ -19,9 +19,7 @@
# This test tests pipe syscall for reverse execution.
#
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/readv-reverse.exp b/gdb/testsuite/gdb.reverse/readv-reverse.exp
index 370a63cbe73..f921e5c67ff 100644
--- a/gdb/testsuite/gdb.reverse/readv-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/readv-reverse.exp
@@ -19,9 +19,7 @@
# This test tests readv syscall for reverse execution.
#
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/recvmsg-reverse.exp b/gdb/testsuite/gdb.reverse/recvmsg-reverse.exp
index 57a30569288..247d58e9f3e 100644
--- a/gdb/testsuite/gdb.reverse/recvmsg-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/recvmsg-reverse.exp
@@ -19,9 +19,7 @@
# This test tests socketpair and recvmsg syscalls for reverse execution.
#
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/rerun-prec.exp b/gdb/testsuite/gdb.reverse/rerun-prec.exp
index 16fc6f28c76..1c3ab52e7a1 100644
--- a/gdb/testsuite/gdb.reverse/rerun-prec.exp
+++ b/gdb/testsuite/gdb.reverse/rerun-prec.exp
@@ -13,9 +13,7 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>. */
-if {![supports_reverse] || ![supports_process_record]} {
- return
-}
+require supports_reverse supports_process_record
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/s390-mvcle.exp b/gdb/testsuite/gdb.reverse/s390-mvcle.exp
index 4b8a8adc8de..c8d235c057a 100644
--- a/gdb/testsuite/gdb.reverse/s390-mvcle.exp
+++ b/gdb/testsuite/gdb.reverse/s390-mvcle.exp
@@ -17,9 +17,7 @@
# This test tests s390 MVCLE opcode for reverse execution.
#
-if ![supports_reverse] {
- return
-}
+require supports_reverse
if { ! [istarget "s390*-*-*"] } {
verbose "Skipping s390 MVCLE instruction recording tests."
diff --git a/gdb/testsuite/gdb.reverse/sigall-precsave.exp b/gdb/testsuite/gdb.reverse/sigall-precsave.exp
index d8761753971..6df5cd2b660 100644
--- a/gdb/testsuite/gdb.reverse/sigall-precsave.exp
+++ b/gdb/testsuite/gdb.reverse/sigall-precsave.exp
@@ -18,10 +18,7 @@ if [target_info exists gdb,nosignals] {
return
}
-if ![supports_reverse] {
- return
-}
-
+require supports_reverse
gdb_exit
gdb_start
diff --git a/gdb/testsuite/gdb.reverse/sigall-reverse.exp b/gdb/testsuite/gdb.reverse/sigall-reverse.exp
index 7078067a71e..818bbec4fb6 100644
--- a/gdb/testsuite/gdb.reverse/sigall-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/sigall-reverse.exp
@@ -18,10 +18,7 @@ if [target_info exists gdb,nosignals] {
return
}
-if ![supports_reverse] {
- return
-}
-
+require supports_reverse
gdb_exit
gdb_start
diff --git a/gdb/testsuite/gdb.reverse/singlejmp-reverse.exp b/gdb/testsuite/gdb.reverse/singlejmp-reverse.exp
index d6934ffcd19..ce9972e8be5 100644
--- a/gdb/testsuite/gdb.reverse/singlejmp-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/singlejmp-reverse.exp
@@ -13,9 +13,7 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile ".S" "${gdb_test_file_name}-nodebug.S"
set executable ${testfile}
diff --git a/gdb/testsuite/gdb.reverse/solib-reverse.exp b/gdb/testsuite/gdb.reverse/solib-reverse.exp
index 3bcf2dfcb24..b7f76f53265 100644
--- a/gdb/testsuite/gdb.reverse/solib-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/solib-reverse.exp
@@ -16,12 +16,7 @@
# This file is part of the GDB testsuite. It tests reverse debugging
# with shared libraries.
-if ![supports_reverse] {
- return
-}
-if {[skip_shlib_tests]} {
- return
-}
+require supports_reverse !skip_shlib_tests
standard_testfile
set lib1file "shr1"
diff --git a/gdb/testsuite/gdb.reverse/step-indirect-call-thunk.exp b/gdb/testsuite/gdb.reverse/step-indirect-call-thunk.exp
index 3f1f5381f09..058482cbb47 100644
--- a/gdb/testsuite/gdb.reverse/step-indirect-call-thunk.exp
+++ b/gdb/testsuite/gdb.reverse/step-indirect-call-thunk.exp
@@ -13,10 +13,7 @@
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-if { ![supports_reverse] } {
- untested "target does not support record"
- return -1
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/step-reverse.exp b/gdb/testsuite/gdb.reverse/step-reverse.exp
index d2975cffb5c..b272d427f15 100644
--- a/gdb/testsuite/gdb.reverse/step-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/step-reverse.exp
@@ -20,9 +20,7 @@
# Test step and next in reverse
#
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/time-reverse.exp b/gdb/testsuite/gdb.reverse/time-reverse.exp
index 94acea8eed5..ec756390c4d 100644
--- a/gdb/testsuite/gdb.reverse/time-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/time-reverse.exp
@@ -19,9 +19,7 @@
# This test tests time syscall for reverse execution.
#
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/until-reverse.exp b/gdb/testsuite/gdb.reverse/until-reverse.exp
index 0afd0e05f50..3357d6c1783 100644
--- a/gdb/testsuite/gdb.reverse/until-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/until-reverse.exp
@@ -16,9 +16,7 @@
# This file is part of the GDB testsuite. It tests 'until' and
# 'advance' in reverse debugging.
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile .c ur1.c
diff --git a/gdb/testsuite/gdb.reverse/waitpid-reverse.exp b/gdb/testsuite/gdb.reverse/waitpid-reverse.exp
index ddaa71a987c..fe6fbc7cb8a 100644
--- a/gdb/testsuite/gdb.reverse/waitpid-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/waitpid-reverse.exp
@@ -21,9 +21,7 @@
# Also serves as regression test for gdb/19187 (recording across a
# fork).
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
diff --git a/gdb/testsuite/gdb.reverse/watch-reverse.exp b/gdb/testsuite/gdb.reverse/watch-reverse.exp
index 056e381cd85..55fa86158b6 100644
--- a/gdb/testsuite/gdb.reverse/watch-reverse.exp
+++ b/gdb/testsuite/gdb.reverse/watch-reverse.exp
@@ -18,9 +18,7 @@
# with watchpoints.
-if ![supports_reverse] {
- return
-}
+require supports_reverse
standard_testfile
--
2.38.1
next prev parent reply other threads:[~2022-12-17 0:08 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-17 0:07 [PATCH 00/46] Rewrite "require" test procedure and use it more often Tom Tromey
2022-12-17 0:07 ` [PATCH 01/46] Don't use ensure_gdb_index with require Tom Tromey
2022-12-17 0:07 ` [PATCH 02/46] Change 'require' to accept a list of predicates Tom Tromey
2022-12-17 0:07 ` [PATCH 03/46] Use unsupported in 'require' Tom Tromey
2022-12-23 12:39 ` Aktemur, Tankut Baris
2023-01-06 1:14 ` Tom Tromey
2022-12-17 0:07 ` Tom Tromey [this message]
2022-12-17 0:07 ` [PATCH 05/46] Use require supports_process_record Tom Tromey
2022-12-17 0:07 ` [PATCH 06/46] Use require dwarf2_support Tom Tromey
2022-12-17 0:07 ` [PATCH 07/46] Use require is_x86_like_target Tom Tromey
2022-12-17 0:07 ` [PATCH 08/46] Use require skip_cplus_tests Tom Tromey
2022-12-17 0:07 ` [PATCH 09/46] Use require skip_shlib_tests Tom Tromey
2022-12-17 0:07 ` [PATCH 10/46] Use require skip_dlmopen_tests Tom Tromey
2022-12-17 0:07 ` [PATCH 11/46] Use require skip_stl_tests Tom Tromey
2022-12-17 0:07 ` [PATCH 12/46] Use require skip_rust_tests Tom Tromey
2022-12-17 0:07 ` [PATCH 13/46] Use require skip_fortran_tests Tom Tromey
2022-12-17 0:07 ` [PATCH 14/46] Use require skip_ada_tests Tom Tromey
2022-12-17 0:07 ` [PATCH 15/46] Use require skip_go_tests Tom Tromey
2022-12-17 0:07 ` [PATCH 16/46] Use require skip_d_tests Tom Tromey
2022-12-17 0:07 ` [PATCH 17/46] Use require skip_ctf_tests Tom Tromey
2022-12-17 0:07 ` [PATCH 18/46] Use require skip_hw_watchpoint_tests Tom Tromey
2022-12-17 0:07 ` [PATCH 19/46] Use require skip_ifunc_tests Tom Tromey
2022-12-17 0:07 ` [PATCH 20/46] Use require skip_aarch64_sve_tests Tom Tromey
2022-12-19 10:50 ` Luis Machado
2022-12-17 0:07 ` [PATCH 21/46] Use require skip_btrace_tests Tom Tromey
2022-12-17 1:15 ` Enze Li
2022-12-18 0:48 ` Tom Tromey
2022-12-19 5:13 ` Enze Li
2022-12-19 14:44 ` Tom Tromey
2022-12-17 0:07 ` [PATCH 22/46] " Tom Tromey
2022-12-17 9:22 ` Metzger, Markus T
2022-12-18 17:46 ` Tom Tromey
2022-12-17 0:07 ` [PATCH 23/46] Use require skip_avx_* Tom Tromey
2022-12-17 0:07 ` [PATCH 24/46] Use require support_displaced_stepping Tom Tromey
2022-12-17 0:07 ` [PATCH 25/46] Use require is_aarch64_target Tom Tromey
2022-12-19 10:46 ` Luis Machado
2022-12-17 0:07 ` [PATCH 26/46] Use require is_aarch32_target Tom Tromey
2022-12-19 10:46 ` Luis Machado
2022-12-17 0:07 ` [PATCH 27/46] Use require is_amd64_regs_target Tom Tromey
2022-12-17 0:08 ` [PATCH 28/46] Use require is_elf_target Tom Tromey
2022-12-17 0:08 ` [PATCH 29/46] Use require can_single_step_to_signal_handler Tom Tromey
2022-12-17 0:08 ` [PATCH 30/46] Use require supports_get_siginfo_type Tom Tromey
2022-12-17 0:08 ` [PATCH 31/46] Use require support_go_compile Tom Tromey
2022-12-17 0:08 ` [PATCH 32/46] Use require use_gdb_stub Tom Tromey
2022-12-17 0:08 ` [PATCH 33/46] Use require can_spawn_for_attach Tom Tromey
2022-12-17 0:08 ` [PATCH 34/46] Use require isnative Tom Tromey
2022-12-17 0:08 ` [PATCH 35/46] Use require skip_gdbserver_tests Tom Tromey
2022-12-17 0:08 ` [PATCH 36/46] Use require skip_shlib_tests Tom Tromey
2022-12-17 0:08 ` [PATCH 37/46] Use require is_c_compiler_gcc Tom Tromey
2022-12-17 0:08 ` [PATCH 38/46] Use require gdb_debug_enabled Tom Tromey
2022-12-17 0:08 ` [PATCH 39/46] Use require gdb_skip_xml_test Tom Tromey
2022-12-17 0:08 ` [PATCH 40/46] Use require gdb_trace_common_supports_arch Tom Tromey
2022-12-17 0:08 ` [PATCH 41/46] Use require skip_perf_tests Tom Tromey
2022-12-17 0:08 ` [PATCH 42/46] Use require skip_opencl_tests Tom Tromey
2022-12-17 0:08 ` [PATCH 43/46] Use require target_can_use_run_cmd Tom Tromey
2022-12-17 0:08 ` [PATCH 44/46] Use require using_fission Tom Tromey
2022-12-17 0:08 ` [PATCH 45/46] Use require skip_debuginfod_tests Tom Tromey
2022-12-17 0:08 ` [PATCH 46/46] Use require gnat_runtime_has_debug_info Tom Tromey
2022-12-19 10:49 ` [PATCH 00/46] Rewrite "require" test procedure and use it more often Luis Machado
2023-01-06 2:45 ` Tom Tromey
2023-01-05 1:29 ` Kevin Buettner
2023-01-06 2:47 ` Tom Tromey
2023-01-07 0:07 ` Kevin Buettner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221217000818.3729389-5-tom@tromey.com \
--to=tom@tromey.com \
--cc=gdb-patches@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).