* [PATCH] Fix dir command for duplicated paths
@ 2014-01-06 1:51 Edjunior Barbosa Machado
2014-01-06 21:44 ` Jan Kratochvil
0 siblings, 1 reply; 3+ messages in thread
From: Edjunior Barbosa Machado @ 2014-01-06 1:51 UTC (permalink / raw)
To: gdb-patches; +Cc: jan.kratochvil
Hi,
noticed this issue with dir command for duplicated paths on upstream gdb:
$ ./gdb -q -ex "dir /tmp/a /tmp/b /tmp/c" -ex "dir /tmp/b /tmp/d /tmp/c"
Source directories searched: /tmp/a:/tmp/b:/tmp/c:$cdir:$cwd
Source directories searched: /tmp/b:/tmp/d:/tmp/c:/tmp/a:/tmp/b:/tmp/c:$cdir:$cwd
In gdb 7.4, the output used to be correct:
Source directories searched: /tmp/a:/tmp/b:/tmp/c:$cdir:$cwd
Source directories searched: /tmp/b:/tmp/d:/tmp/c:/tmp/a:$cdir:$cwd
This issue was introduced with a change on gdb/source.c from this patch:
https://sourceware.org/ml/gdb-patches/2012-04/msg00086.html
The patch below intends to fixes this regression using the original block of
code that checks for duplicated paths along the previously included paths.
Ok?
Thanks,
--
Edjunior
gdb/
2014-01-05 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
* source.c (add_path): Fix check for duplicated paths in the previously
included paths.
---
gdb/source.c | 32 ++++++++++++++++++++++----------
1 file changed, 22 insertions(+), 10 deletions(-)
diff --git a/gdb/source.c b/gdb/source.c
index b75a7b4..4da5a95 100644
--- a/gdb/source.c
+++ b/gdb/source.c
@@ -574,17 +574,29 @@ add_path (char *dirname, char **which_path, int parse_separators)
char tinybuf[2];
p = *which_path;
- /* FIXME: we should use realpath() or its work-alike
- before comparing. Then all the code above which
- removes excess slashes and dots could simply go away. */
- if (!filename_cmp (p, name))
+ while (1)
{
- /* Found it in the search path, remove old copy. */
- if (p > *which_path)
- p--; /* Back over leading separator. */
- if (prefix > p - *which_path)
- goto skip_dup; /* Same dir twice in one cmd. */
- memmove (p, &p[len + 1], strlen (&p[len + 1]) + 1); /* Copy from next \0 or : */
+ /* FIXME: we should use realpath() or its work-alike
+ before comparing. Then all the code above which
+ removes excess slashes and dots could simply go away. */
+ if (!filename_ncmp (p, name, len)
+ && (p[len] == '\0' || p[len] == DIRNAME_SEPARATOR))
+ {
+ /* Found it in the search path, remove old copy. */
+ if (p > *which_path)
+ /* Back over leading separator. */
+ p--;
+ if (prefix > p - *which_path)
+ /* Same dir twice in one cmd. */
+ goto skip_dup;
+ /* Copy from next '\0' or ':'. */
+ memmove (p, &p[len + 1], strlen (&p[len + 1]) + 1);
+ }
+ p = strchr (p, DIRNAME_SEPARATOR);
+ if (p != 0)
+ ++p;
+ else
+ break;
}
tinybuf[0] = DIRNAME_SEPARATOR;
--
1.7.9.5
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] Fix dir command for duplicated paths
2014-01-06 1:51 [PATCH] Fix dir command for duplicated paths Edjunior Barbosa Machado
@ 2014-01-06 21:44 ` Jan Kratochvil
2014-01-07 19:21 ` Edjunior Barbosa Machado
0 siblings, 1 reply; 3+ messages in thread
From: Jan Kratochvil @ 2014-01-06 21:44 UTC (permalink / raw)
To: Edjunior Barbosa Machado; +Cc: gdb-patches
[-- Attachment #1: Type: text/plain, Size: 2276 bytes --]
On Mon, 06 Jan 2014 02:50:55 +0100, Edjunior Barbosa Machado wrote:
> The patch below intends to fixes this regression using the original block of
> code that checks for duplicated paths along the previously included paths.
OK with the patch, minor modification below and the new testcase.
Thanks for catching the regression.
Jan
[...]
> --- a/gdb/source.c
> +++ b/gdb/source.c
> @@ -574,17 +574,29 @@ add_path (char *dirname, char **which_path, int parse_separators)
> char tinybuf[2];
>
> p = *which_path;
> - /* FIXME: we should use realpath() or its work-alike
> - before comparing. Then all the code above which
> - removes excess slashes and dots could simply go away. */
> - if (!filename_cmp (p, name))
> + while (1)
> {
> - /* Found it in the search path, remove old copy. */
> - if (p > *which_path)
> - p--; /* Back over leading separator. */
> - if (prefix > p - *which_path)
> - goto skip_dup; /* Same dir twice in one cmd. */
> - memmove (p, &p[len + 1], strlen (&p[len + 1]) + 1); /* Copy from next \0 or : */
> + /* FIXME: we should use realpath() or its work-alike
> + before comparing. Then all the code above which
> + removes excess slashes and dots could simply go away. */
> + if (!filename_ncmp (p, name, len)
> + && (p[len] == '\0' || p[len] == DIRNAME_SEPARATOR))
> + {
> + /* Found it in the search path, remove old copy. */
> + if (p > *which_path)
> + /* Back over leading separator. */
> + p--;
{
/* Back over leading separator. */
p--;
}
due to (sorry for the rule of mine):
https://sourceware.org/gdb/wiki/Internals%20GDB-C-Coding-Standards
Any two or more lines in code should be wrapped in braces, even if they are
comments, as they look like separate statements:
> + if (prefix > p - *which_path)
> + /* Same dir twice in one cmd. */
> + goto skip_dup;
{
/* Same dir twice in one cmd. */
goto skip_dup;
}
> + /* Copy from next '\0' or ':'. */
> + memmove (p, &p[len + 1], strlen (&p[len + 1]) + 1);
> + }
> + p = strchr (p, DIRNAME_SEPARATOR);
> + if (p != 0)
> + ++p;
> + else
> + break;
> }
>
> tinybuf[0] = DIRNAME_SEPARATOR;
> --
> 1.7.9.5
[-- Attachment #2: 1 --]
[-- Type: text/plain, Size: 1318 bytes --]
gdb/testsuite/
2014-01-06 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.base/source-dir.exp: New file.
diff --git a/gdb/testsuite/gdb.base/source-dir.exp b/gdb/testsuite/gdb.base/source-dir.exp
new file mode 100644
index 0000000..43b56b7
--- /dev/null
+++ b/gdb/testsuite/gdb.base/source-dir.exp
@@ -0,0 +1,23 @@
+# Copyright 2014 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+standard_testfile
+
+gdb_start
+
+set foo "/nOtExStInG"
+
+gdb_test "directory $foo/a $foo/b $foo/c" "\r\nSource directories searched: $foo/a:$foo/b:$foo/c:\\\$cdir:\\\$cwd"
+gdb_test "directory $foo/b $foo/d $foo/c" "\r\nSource directories searched: $foo/b:$foo/d:$foo/c:$foo/a:\\\$cdir:\\\$cwd"
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] Fix dir command for duplicated paths
2014-01-06 21:44 ` Jan Kratochvil
@ 2014-01-07 19:21 ` Edjunior Barbosa Machado
0 siblings, 0 replies; 3+ messages in thread
From: Edjunior Barbosa Machado @ 2014-01-07 19:21 UTC (permalink / raw)
To: Jan Kratochvil; +Cc: gdb-patches
On 01/06/2014 07:44 PM, Jan Kratochvil wrote:
> On Mon, 06 Jan 2014 02:50:55 +0100, Edjunior Barbosa Machado wrote:
>> The patch below intends to fixes this regression using the original block of
>> code that checks for duplicated paths along the previously included paths.
>
> OK with the patch, minor modification below and the new testcase.
>
> Thanks for catching the regression.
>
Thanks Jan for the review and the new testcase. I've just checked in:
https://sourceware.org/ml/gdb-cvs/2014-01/msg00024.html
--
Edjunior
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-01-07 19:21 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-01-06 1:51 [PATCH] Fix dir command for duplicated paths Edjunior Barbosa Machado
2014-01-06 21:44 ` Jan Kratochvil
2014-01-07 19:21 ` Edjunior Barbosa Machado
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).