* [PATCH v7 0/3] disass: Add /x modifier
@ 2020-09-26 8:50 fam
2020-09-26 8:50 ` [PATCH v7 1/3] disass: Add /x modifier to print offsets in hex fam
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: fam @ 2020-09-26 8:50 UTC (permalink / raw)
To: gdb-patches
Cc: Eli Zaretskii, fam, Andreas Schwab, Pedro Alves, Andrew Burgess,
Simon Marchi
From: Fam Zheng <famzheng@amazon.com>
v7: Fix texinfo node name in ChangeLog. [Eli]
v6: Add texinfo section name in ChangeLog. [Eli]
v5: Add function names in ChangeLog. [Eli]
v4: Add ChangeLog entries. [Eli]
v3: Add a test, more doc, and drop tmp buffer. [Andreas, Simon, Pedro]
This is a new modifier for disass command, to print offsets in hex. This
reduces pain for low level debugging (Linux kernel, Xen, etc.) when the
backtraces from dmesg are in hex - no manual converting needed to do a cross
matching when looking at both sides at the same time.
Fam Zheng (3):
disass: Add /x modifier to print offsets in hex
disass: Add test for /x mode
disass: Add texinfo doc for the /x modifier
gdb/NEWS | 3 ++
gdb/cli/cli-cmds.c | 17 +++++++----
gdb/disasm.c | 5 +++-
gdb/disasm.h | 1 +
gdb/doc/gdb.texinfo | 38 +++++++++++++++++++------
gdb/record.c | 3 ++
gdb/testsuite/gdb.base/disasm-optim.exp | 7 +++++
7 files changed, 59 insertions(+), 15 deletions(-)
--
2.25.1
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v7 1/3] disass: Add /x modifier to print offsets in hex
2020-09-26 8:50 [PATCH v7 0/3] disass: Add /x modifier fam
@ 2020-09-26 8:50 ` fam
2020-10-12 9:56 ` Fam Zheng
2020-11-12 20:16 ` Tom Tromey
2020-09-26 8:50 ` [PATCH v7 2/3] disass: Add test for /x mode fam
2020-09-26 8:50 ` [PATCH v7 3/3] disass: Add texinfo doc for the /x modifier fam
2 siblings, 2 replies; 8+ messages in thread
From: fam @ 2020-09-26 8:50 UTC (permalink / raw)
To: gdb-patches
Cc: Eli Zaretskii, fam, Andreas Schwab, Pedro Alves, Andrew Burgess,
Simon Marchi
From: Fam Zheng <famzheng@amazon.com>
Backtrace messages printed by Linux kernel and Xen have hex offsets,
e.g.:
(XEN) Xen call trace:
(XEN) [<ffff82d0402eefbb>] R guest_walk_tables_2_levels+0x189/0x66d
(XEN) [<ffff82d0402edbbd>] F hap_p2m_ga_to_gfn_2_levels+0x112/0x25b
(XEN) [<ffff82d0402edd22>] F hap_gva_to_gfn_2_levels+0x1c/0x1e
(XEN) [<ffff82d0402f832e>] F paging_gva_to_gfn+0x14a/0x167
Having this modifier saves converting between hex values from the
backtrace log and offsets in gdb disass output.
gdb/ChangeLog:
2020-09-25 Fam Zheng <famzheng@amazon.com>
* NEWS: Mention the /x modifier of disass.
* cli/cli-cmds.c (disassemble_current_function): Add usage text
for /x modifier.
(disassemble_command): Parse /x modifier for disass.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn):
Handle /x modifier.
* disasm.h (enum gdb_disassembly_flag): Add a new flag for /x
modifier.
* record.c (get_insn_history_modifiers): Parse /x modifier.
---
gdb/NEWS | 3 +++
gdb/cli/cli-cmds.c | 17 ++++++++++++-----
gdb/disasm.c | 5 ++++-
gdb/disasm.h | 1 +
gdb/record.c | 3 +++
5 files changed, 23 insertions(+), 6 deletions(-)
diff --git a/gdb/NEWS b/gdb/NEWS
index f30d718331..ba1cf76b36 100644
--- a/gdb/NEWS
+++ b/gdb/NEWS
@@ -3,6 +3,9 @@
*** Changes since GDB 10
+* A new modifier '/x' is added to disassemble command, to print instruction
+ offsets in hex.
+
* MI changes
** '-break-insert --qualified' and '-dprintf-insert --qualified'
diff --git a/gdb/cli/cli-cmds.c b/gdb/cli/cli-cmds.c
index e3965fea07..e10544a734 100644
--- a/gdb/cli/cli-cmds.c
+++ b/gdb/cli/cli-cmds.c
@@ -1456,12 +1456,12 @@ disassemble_current_function (gdb_disassembly_flags flags)
/* Dump a specified section of assembly code.
Usage:
- disassemble [/mrs]
+ disassemble [/mrsx]
- dump the assembly code for the function of the current pc
- disassemble [/mrs] addr
+ disassemble [/mrsx] addr
- dump the assembly code for the function at ADDR
- disassemble [/mrs] low,high
- disassemble [/mrs] low,+length
+ disassemble [/mrsx] low,high
+ disassemble [/mrsx] low,+length
- dump the assembly code in the range [LOW,HIGH), or [LOW,LOW+length)
A /m modifier will include source code with the assembly in a
@@ -1472,6 +1472,8 @@ disassemble_current_function (gdb_disassembly_flags flags)
A /r modifier will include raw instructions in hex with the assembly.
+ A /x modifier will print offsets in hex.
+
A /s modifier will include source code with the assembly, like /m, with
two important differences:
1) The output is still in pc address order.
@@ -1510,6 +1512,9 @@ disassemble_command (const char *arg, int from_tty)
case 'r':
flags |= DISASSEMBLY_RAW_INSN;
break;
+ case 'x':
+ flags |= DISASSEMBLY_HEX_OFFSET;
+ break;
case 's':
flags |= DISASSEMBLY_SOURCE;
break;
@@ -2535,7 +2540,7 @@ can be shown using \"show listsize\"."));
c = add_com ("disassemble", class_vars, disassemble_command, _("\
Disassemble a specified section of memory.\n\
-Usage: disassemble[/m|/r|/s] START [, END]\n\
+Usage: disassemble[/m|/r|/s|/x] START [, END]\n\
Default is the function surrounding the pc of the selected frame.\n\
\n\
With a /s modifier, source lines are included (if available).\n\
@@ -2551,6 +2556,8 @@ in favor of /s.\n\
\n\
With a /r modifier, raw instructions in hex are included.\n\
\n\
+With a /x modifier, offsets are printed in hex.\n\
+\n\
With a single argument, the function surrounding that address is dumped.\n\
Two arguments (separated by a comma) are taken as a range of memory to dump,\n\
in the form of \"start,end\", or \"start,+length\".\n\
diff --git a/gdb/disasm.c b/gdb/disasm.c
index e45c840068..c681d8b1e9 100644
--- a/gdb/disasm.c
+++ b/gdb/disasm.c
@@ -250,7 +250,10 @@ gdb_pretty_print_disassembler::pretty_print_insn (const struct disasm_insn *insn
the offset takes the place of the "+" here. */
if (offset >= 0)
m_uiout->text ("+");
- m_uiout->field_signed ("offset", offset);
+ m_uiout->field_fmt ("offset",
+ ((flags & DISASSEMBLY_HEX_OFFSET) != 0
+ ? "0x%x" : "%d"),
+ offset);
m_uiout->text (">:\t");
}
else
diff --git a/gdb/disasm.h b/gdb/disasm.h
index b0f535eaa2..fb293650de 100644
--- a/gdb/disasm.h
+++ b/gdb/disasm.h
@@ -31,6 +31,7 @@ enum gdb_disassembly_flag
DISASSEMBLY_OMIT_PC = (0x1 << 4),
DISASSEMBLY_SOURCE = (0x1 << 5),
DISASSEMBLY_SPECULATIVE = (0x1 << 6),
+ DISASSEMBLY_HEX_OFFSET = (0x1 << 7),
};
DEF_ENUM_FLAGS_TYPE (enum gdb_disassembly_flag, gdb_disassembly_flags);
diff --git a/gdb/record.c b/gdb/record.c
index 759395d5bc..44591e8cf0 100644
--- a/gdb/record.c
+++ b/gdb/record.c
@@ -494,6 +494,9 @@ get_insn_history_modifiers (const char **arg)
case 'r':
modifiers |= DISASSEMBLY_RAW_INSN;
break;
+ case 'x':
+ modifiers |= DISASSEMBLY_HEX_OFFSET;
+ break;
case 'f':
modifiers |= DISASSEMBLY_OMIT_FNAME;
break;
--
2.25.1
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v7 2/3] disass: Add test for /x mode
2020-09-26 8:50 [PATCH v7 0/3] disass: Add /x modifier fam
2020-09-26 8:50 ` [PATCH v7 1/3] disass: Add /x modifier to print offsets in hex fam
@ 2020-09-26 8:50 ` fam
2020-11-12 20:17 ` Tom Tromey
2020-09-26 8:50 ` [PATCH v7 3/3] disass: Add texinfo doc for the /x modifier fam
2 siblings, 1 reply; 8+ messages in thread
From: fam @ 2020-09-26 8:50 UTC (permalink / raw)
To: gdb-patches
Cc: Eli Zaretskii, fam, Andreas Schwab, Pedro Alves, Andrew Burgess,
Simon Marchi
From: Fam Zheng <famzheng@amazon.com>
gdb/testsuite/ChangeLog:
2020-09-25 Fam Zheng <famzheng@amazon.com>
* gdb.base/disasm-optim.exp: Add test for /x.
---
gdb/testsuite/gdb.base/disasm-optim.exp | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/gdb/testsuite/gdb.base/disasm-optim.exp b/gdb/testsuite/gdb.base/disasm-optim.exp
index 179e76ad0e..8c28fe10de 100644
--- a/gdb/testsuite/gdb.base/disasm-optim.exp
+++ b/gdb/testsuite/gdb.base/disasm-optim.exp
@@ -38,3 +38,10 @@ gdb_test_sequence "disassemble /s main" \
"disasm-optim\\.h:\r\n22"
"End of assembler dump\\."
}
+
+gdb_test_sequence "disassemble /x main" \
+ "Disassemble main with source" {
+ "Dump of assembler code for function main:"
+ "=> 0x[0-9a-f]* \\<\\+0x0>:"
+ "End of assembler dump\\."
+ }
--
2.25.1
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v7 3/3] disass: Add texinfo doc for the /x modifier
2020-09-26 8:50 [PATCH v7 0/3] disass: Add /x modifier fam
2020-09-26 8:50 ` [PATCH v7 1/3] disass: Add /x modifier to print offsets in hex fam
2020-09-26 8:50 ` [PATCH v7 2/3] disass: Add test for /x mode fam
@ 2020-09-26 8:50 ` fam
2 siblings, 0 replies; 8+ messages in thread
From: fam @ 2020-09-26 8:50 UTC (permalink / raw)
To: gdb-patches
Cc: Eli Zaretskii, fam, Andreas Schwab, Pedro Alves, Andrew Burgess,
Simon Marchi
From: Fam Zheng <famzheng@amazon.com>
gdb/doc/ChangeLog:
2020-09-25 Fam Zheng <famzheng@amazon.com>
* gdb.texinfo (Machine Code): Document /x modifier of disass
command.
---
gdb/doc/gdb.texinfo | 38 +++++++++++++++++++++++++++++---------
1 file changed, 29 insertions(+), 9 deletions(-)
diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo
index 8bff27c940..4dad72a34f 100644
--- a/gdb/doc/gdb.texinfo
+++ b/gdb/doc/gdb.texinfo
@@ -9514,16 +9514,20 @@ line.
@itemx disassemble /m
@itemx disassemble /s
@itemx disassemble /r
-This specialized command dumps a range of memory as machine
-instructions. It can also print mixed source+disassembly by specifying
-the @code{/m} or @code{/s} modifier and print the raw instructions in hex
-as well as in symbolic form by specifying the @code{/r} modifier.
-The default memory range is the function surrounding the
-program counter of the selected frame. A single argument to this
+@itemx disassemble /x
+This specialized command dumps a range of memory as machine instructions.
+If the address of an instruction resolves to a symbol, such as a function
+name, the symbol name and the offset are printed following the instruction
+address. The offset is in decimal by default and in hex if @code{/x} is
+modifier is used. It can also print mixed source+disassembly by
+specifying the @code{/m} or @code{/s} modifier and print the raw
+instructions in hex as well as in symbolic form by specifying the
+@code{/r} modifier. The default memory range is the function surrounding
+the program counter of the selected frame. A single argument to this
command is a program counter value; @value{GDBN} dumps the function
-surrounding this value. When two arguments are given, they should
-be separated by a comma, possibly surrounded by whitespace. The
-arguments specify a range of addresses to dump, in one of two forms:
+surrounding this value. When two arguments are given, they should be
+separated by a comma, possibly surrounded by whitespace. The arguments
+specify a range of addresses to dump, in one of two forms:
@table @code
@item @var{start},@var{end}
@@ -9561,6 +9565,22 @@ Dump of assembler code from 0x32c4 to 0x32e4:
End of assembler dump.
@end smallexample
+@code{/x} could be used to show offsets in hex:
+
+@smallexample
+(@value{GDBP}) disas /x 0x32c4, 0x32e4
+Dump of assembler code from 0x32c4 to 0x32e4:
+ 0x32c4 <main+0xcc>: addil 0,dp
+ 0x32c8 <main+0xd0>: ldw 0x22c(sr0,r1),r26
+ 0x32cc <main+0xd4>: ldil 0x3000,r31
+ 0x32d0 <main+0xd8>: ble 0x3f8(sr4,r31)
+ 0x32d4 <main+0xdc>: ldo 0(r31),rp
+ 0x32d8 <main+0xe0>: addil -0x800,dp
+ 0x32dc <main+0xe4>: ldo 0x588(r1),r26
+ 0x32e0 <main+0xe8>: ldil 0x3000,r31
+End of assembler dump.
+@end smallexample
+
Here is an example showing mixed source+assembly for Intel x86
with @code{/m} or @code{/s}, when the program is stopped just after
function prologue in a non-optimized function with no inline code.
--
2.25.1
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v7 1/3] disass: Add /x modifier to print offsets in hex
2020-09-26 8:50 ` [PATCH v7 1/3] disass: Add /x modifier to print offsets in hex fam
@ 2020-10-12 9:56 ` Fam Zheng
2020-10-12 15:05 ` Eli Zaretskii
2020-11-12 20:16 ` Tom Tromey
1 sibling, 1 reply; 8+ messages in thread
From: Fam Zheng @ 2020-10-12 9:56 UTC (permalink / raw)
To: gdb-patches
Cc: Eli Zaretskii, Andreas Schwab, Pedro Alves, Andrew Burgess, Simon Marchi
Ping?
On Sat, 26 Sep 2020, 09:51 , <fam@euphon.net> wrote:
> From: Fam Zheng <famzheng@amazon.com>
>
> Backtrace messages printed by Linux kernel and Xen have hex offsets,
> e.g.:
>
> (XEN) Xen call trace:
> (XEN) [<ffff82d0402eefbb>] R guest_walk_tables_2_levels+0x189/0x66d
> (XEN) [<ffff82d0402edbbd>] F hap_p2m_ga_to_gfn_2_levels+0x112/0x25b
> (XEN) [<ffff82d0402edd22>] F hap_gva_to_gfn_2_levels+0x1c/0x1e
> (XEN) [<ffff82d0402f832e>] F paging_gva_to_gfn+0x14a/0x167
>
> Having this modifier saves converting between hex values from the
> backtrace log and offsets in gdb disass output.
>
> gdb/ChangeLog:
>
> 2020-09-25 Fam Zheng <famzheng@amazon.com>
>
> * NEWS: Mention the /x modifier of disass.
> * cli/cli-cmds.c (disassemble_current_function): Add usage text
> for /x modifier.
> (disassemble_command): Parse /x modifier for disass.
> * disasm.c (gdb_pretty_print_disassembler::pretty_print_insn):
> Handle /x modifier.
> * disasm.h (enum gdb_disassembly_flag): Add a new flag for /x
> modifier.
> * record.c (get_insn_history_modifiers): Parse /x modifier.
> ---
> gdb/NEWS | 3 +++
> gdb/cli/cli-cmds.c | 17 ++++++++++++-----
> gdb/disasm.c | 5 ++++-
> gdb/disasm.h | 1 +
> gdb/record.c | 3 +++
> 5 files changed, 23 insertions(+), 6 deletions(-)
>
> diff --git a/gdb/NEWS b/gdb/NEWS
> index f30d718331..ba1cf76b36 100644
> --- a/gdb/NEWS
> +++ b/gdb/NEWS
> @@ -3,6 +3,9 @@
>
> *** Changes since GDB 10
>
> +* A new modifier '/x' is added to disassemble command, to print
> instruction
> + offsets in hex.
> +
> * MI changes
>
> ** '-break-insert --qualified' and '-dprintf-insert --qualified'
> diff --git a/gdb/cli/cli-cmds.c b/gdb/cli/cli-cmds.c
> index e3965fea07..e10544a734 100644
> --- a/gdb/cli/cli-cmds.c
> +++ b/gdb/cli/cli-cmds.c
> @@ -1456,12 +1456,12 @@ disassemble_current_function
> (gdb_disassembly_flags flags)
> /* Dump a specified section of assembly code.
>
> Usage:
> - disassemble [/mrs]
> + disassemble [/mrsx]
> - dump the assembly code for the function of the current pc
> - disassemble [/mrs] addr
> + disassemble [/mrsx] addr
> - dump the assembly code for the function at ADDR
> - disassemble [/mrs] low,high
> - disassemble [/mrs] low,+length
> + disassemble [/mrsx] low,high
> + disassemble [/mrsx] low,+length
> - dump the assembly code in the range [LOW,HIGH), or
> [LOW,LOW+length)
>
> A /m modifier will include source code with the assembly in a
> @@ -1472,6 +1472,8 @@ disassemble_current_function (gdb_disassembly_flags
> flags)
>
> A /r modifier will include raw instructions in hex with the assembly.
>
> + A /x modifier will print offsets in hex.
> +
> A /s modifier will include source code with the assembly, like /m, with
> two important differences:
> 1) The output is still in pc address order.
> @@ -1510,6 +1512,9 @@ disassemble_command (const char *arg, int from_tty)
> case 'r':
> flags |= DISASSEMBLY_RAW_INSN;
> break;
> + case 'x':
> + flags |= DISASSEMBLY_HEX_OFFSET;
> + break;
> case 's':
> flags |= DISASSEMBLY_SOURCE;
> break;
> @@ -2535,7 +2540,7 @@ can be shown using \"show listsize\"."));
>
> c = add_com ("disassemble", class_vars, disassemble_command, _("\
> Disassemble a specified section of memory.\n\
> -Usage: disassemble[/m|/r|/s] START [, END]\n\
> +Usage: disassemble[/m|/r|/s|/x] START [, END]\n\
> Default is the function surrounding the pc of the selected frame.\n\
> \n\
> With a /s modifier, source lines are included (if available).\n\
> @@ -2551,6 +2556,8 @@ in favor of /s.\n\
> \n\
> With a /r modifier, raw instructions in hex are included.\n\
> \n\
> +With a /x modifier, offsets are printed in hex.\n\
> +\n\
> With a single argument, the function surrounding that address is
> dumped.\n\
> Two arguments (separated by a comma) are taken as a range of memory to
> dump,\n\
> in the form of \"start,end\", or \"start,+length\".\n\
> diff --git a/gdb/disasm.c b/gdb/disasm.c
> index e45c840068..c681d8b1e9 100644
> --- a/gdb/disasm.c
> +++ b/gdb/disasm.c
> @@ -250,7 +250,10 @@ gdb_pretty_print_disassembler::pretty_print_insn
> (const struct disasm_insn *insn
> the offset takes the place of the "+" here. */
> if (offset >= 0)
> m_uiout->text ("+");
> - m_uiout->field_signed ("offset", offset);
> + m_uiout->field_fmt ("offset",
> + ((flags & DISASSEMBLY_HEX_OFFSET) != 0
> + ? "0x%x" : "%d"),
> + offset);
> m_uiout->text (">:\t");
> }
> else
> diff --git a/gdb/disasm.h b/gdb/disasm.h
> index b0f535eaa2..fb293650de 100644
> --- a/gdb/disasm.h
> +++ b/gdb/disasm.h
> @@ -31,6 +31,7 @@ enum gdb_disassembly_flag
> DISASSEMBLY_OMIT_PC = (0x1 << 4),
> DISASSEMBLY_SOURCE = (0x1 << 5),
> DISASSEMBLY_SPECULATIVE = (0x1 << 6),
> + DISASSEMBLY_HEX_OFFSET = (0x1 << 7),
> };
> DEF_ENUM_FLAGS_TYPE (enum gdb_disassembly_flag, gdb_disassembly_flags);
>
> diff --git a/gdb/record.c b/gdb/record.c
> index 759395d5bc..44591e8cf0 100644
> --- a/gdb/record.c
> +++ b/gdb/record.c
> @@ -494,6 +494,9 @@ get_insn_history_modifiers (const char **arg)
> case 'r':
> modifiers |= DISASSEMBLY_RAW_INSN;
> break;
> + case 'x':
> + modifiers |= DISASSEMBLY_HEX_OFFSET;
> + break;
> case 'f':
> modifiers |= DISASSEMBLY_OMIT_FNAME;
> break;
> --
> 2.25.1
>
>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v7 1/3] disass: Add /x modifier to print offsets in hex
2020-10-12 9:56 ` Fam Zheng
@ 2020-10-12 15:05 ` Eli Zaretskii
0 siblings, 0 replies; 8+ messages in thread
From: Eli Zaretskii @ 2020-10-12 15:05 UTC (permalink / raw)
To: Fam Zheng; +Cc: gdb-patches, schwab, pedro, andrew.burgess, simark
> From: Fam Zheng <fam@euphon.net>
> Date: Mon, 12 Oct 2020 10:56:57 +0100
> Cc: Eli Zaretskii <eliz@gnu.org>, Andreas Schwab <schwab@linux-m68k.org>, Pedro Alves <pedro@palves.net>,
> Andrew Burgess <andrew.burgess@embecosm.com>, Simon Marchi <simark@simark.ca>
>
> Ping?
OK for the documentation parts.
Thanks.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v7 1/3] disass: Add /x modifier to print offsets in hex
2020-09-26 8:50 ` [PATCH v7 1/3] disass: Add /x modifier to print offsets in hex fam
2020-10-12 9:56 ` Fam Zheng
@ 2020-11-12 20:16 ` Tom Tromey
1 sibling, 0 replies; 8+ messages in thread
From: Tom Tromey @ 2020-11-12 20:16 UTC (permalink / raw)
To: fam; +Cc: gdb-patches, Andreas Schwab, Simon Marchi
>>>>> ">" == fam <fam@euphon.net> writes:
>> 2020-09-25 Fam Zheng <famzheng@amazon.com>
>> * NEWS: Mention the /x modifier of disass.
>> * cli/cli-cmds.c (disassemble_current_function): Add usage text
>> for /x modifier.
>> (disassemble_command): Parse /x modifier for disass.
>> * disasm.c (gdb_pretty_print_disassembler::pretty_print_insn):
>> Handle /x modifier.
>> * disasm.h (enum gdb_disassembly_flag): Add a new flag for /x
>> modifier.
>> * record.c (get_insn_history_modifiers): Parse /x modifier.
Thank you for the patch. This looks good to me.
Do you have a copyright assignment in place, or in progress?
If not, contact me off-list and we can get things started.
That is a prerequisite for getting this in.
Tom
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v7 2/3] disass: Add test for /x mode
2020-09-26 8:50 ` [PATCH v7 2/3] disass: Add test for /x mode fam
@ 2020-11-12 20:17 ` Tom Tromey
0 siblings, 0 replies; 8+ messages in thread
From: Tom Tromey @ 2020-11-12 20:17 UTC (permalink / raw)
To: fam; +Cc: gdb-patches, Andreas Schwab, Simon Marchi
>>>>> ">" == fam <fam@euphon.net> writes:
>> 2020-09-25 Fam Zheng <famzheng@amazon.com>
>> * gdb.base/disasm-optim.exp: Add test for /x.
Looks good. Normally we'd have the test suite patch in with the main
patch, but I don't think it's a huge deal.
Tom
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2020-11-12 20:17 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-26 8:50 [PATCH v7 0/3] disass: Add /x modifier fam
2020-09-26 8:50 ` [PATCH v7 1/3] disass: Add /x modifier to print offsets in hex fam
2020-10-12 9:56 ` Fam Zheng
2020-10-12 15:05 ` Eli Zaretskii
2020-11-12 20:16 ` Tom Tromey
2020-09-26 8:50 ` [PATCH v7 2/3] disass: Add test for /x mode fam
2020-11-12 20:17 ` Tom Tromey
2020-09-26 8:50 ` [PATCH v7 3/3] disass: Add texinfo doc for the /x modifier fam
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).