From: Milos Kalicanin <Milos.Kalicanin@Syrmia.com>
To: "gdb-patches@sourceware.org" <gdb-patches@sourceware.org>
Cc: Andrew Burgess <aburgess@redhat.com>,
"Maciej W . Rozycki" <macro@orcam.me.uk>,
Chao-ying Fu <cfu@wavecomp.com>,
Djordje Todorovic <Djordje.Todorovic@syrmia.com>,
Dragan Mladjenovic <Dragan.Mladjenovic@syrmia.com>,
"simon.marchi@sourceware.org" <simon.marchi@sourceware.org>
Subject: [PATCH^3] gdb: mips: Add MIPSR6 support
Date: Tue, 30 Jan 2024 15:17:15 +0000 [thread overview]
Message-ID: <AS8PR03MB969878E63A85A786E3461C52967D2@AS8PR03MB9698.eurprd03.prod.outlook.com> (raw)
Introduce new instruction encodings from Release 6 of the MIPS
architecture [1]. Support breakpoints and single stepping with
compact branches, forbidden slots, new branch instruction and
new atomic load-store instruction encodings.
Changes from v2: Added new tests
[1] "MIPS64 Architecture for Programmers Volume II-A: The MIPS64
Instruction Set Reference Manual", Document Number: MD00087,
Revision 6.06, December 15, 2016, Section 3 "The MIPS64
Instruction Set", pp. 42-530
https://s3-eu-west-1.amazonaws.com/downloads-mips/documents/MD00087-2B-MIPS64BIS-AFP-6.06.pdf
2024-01-30 Andrew Bennett <andrew.bennett@imgtec.com>
Matthew Fortune <matthew.fortune@mips.com>
Faraz Shahbazker <fshahbazker@wavecomp.com>
gdb/ChangeLog:
* mips-tdep.c (is_mipsr6_isa): New.
(b0s21_imm): New define.
(mips32_relative_offset21, mips32_relative_offset26): New.
(is_add32bit_overflow, is_add64bit_overflow): New.
(mips32_next_pc): Handle r6 compact and fpu coprocessor branches.
Move handling of BLEZ, BGTZ opcode into ...
(mips32_blez_pc): New.
(mips32_instruction_is_compact_branch): New.
(mips32_insn_at_pc_has_forbidden_slot): New.
(mips32_scan_prologue): Ignore pre-r6 addi encoding on r6.
Stop at compact branch also.
(LLSC_R6_OPCODE,LL_R6_FUNCT,LLE_FUNCT,
LLD_R6_FUNCT,SC_R6_FUNCT,SCE_FUNCT,
SCD_R6_FUNCT: New defines.
(is_ll_insn, is_sc_insn): New.
(mips_deal_with_atomic_sequence): Use is_ll_insn/is_sc_insn.
Handle compact branches.
(mips_about_to_return): Handle jrc and macro jr.
(mips32_stack_frame_destroyed_p): Likewise.
(mips32_instruction_has_delay_slot): Don't handle JALX on r6.
Handle compact branches and coprocessor branches.
(mips_adjust_breakpoint_address): Skip forbidden slot for
compact branches.
---
gdb/mips-tdep.c | 520 ++++++++-
gdb/testsuite/gdb.arch/mips-64-r6.c | 1469 +++++++++++++++++++++++++
gdb/testsuite/gdb.arch/mips-64-r6.exp | 99 ++
3 files changed, 2046 insertions(+), 42 deletions(-)
create mode 100644 gdb/testsuite/gdb.arch/mips-64-r6.c
create mode 100644 gdb/testsuite/gdb.arch/mips-64-r6.exp
diff --git a/gdb/mips-tdep.c b/gdb/mips-tdep.c
index bf0b66c4b00..a60377f25e0 100644
--- a/gdb/mips-tdep.c
+++ b/gdb/mips-tdep.c
@@ -76,6 +76,9 @@ static int mips16_insn_at_pc_has_delay_slot (struct gdbarch *gdbarch,
static void mips_print_float_info (struct gdbarch *, struct ui_file *,
frame_info_ptr, const char *);
+static void mips_read_fp_register_single (struct frame_info_ptr, int,
+ gdb_byte *);
+
/* A useful bit in the CP0 status register (MIPS_PS_REGNUM). */
/* This bit is set if we are emulating 32-bit FPRs on a 64-bit chip. */
#define ST0_FR (1 << 26)
@@ -1500,6 +1503,16 @@ mips_fetch_instruction (struct gdbarch *gdbarch,
return extract_unsigned_integer (buf, instlen, byte_order);
}
+/* Return one if the gdbarch is based on MIPS Release 6. */
+static int
+is_mipsr6_isa (struct gdbarch *gdbarch)
+{
+ const struct bfd_arch_info *info = gdbarch_bfd_arch_info (gdbarch);
+
+ return (info->mach == bfd_mach_mipsisa32r6
+ || info->mach == bfd_mach_mipsisa64r6);
+}
+
/* These are the fields of 32 bit mips instructions. */
#define mips32_op(x) (x >> 26)
#define itype_op(x) (x >> 26)
@@ -1542,6 +1555,7 @@ mips_fetch_instruction (struct gdbarch *gdbarch,
#define b0s11_op(x) ((x) & 0x7ff)
#define b0s12_imm(x) ((x) & 0xfff)
#define b0s16_imm(x) ((x) & 0xffff)
+#define b0s21_imm(x) ((x) & 0x1fffff)
#define b0s26_imm(x) ((x) & 0x3ffffff)
#define b6s10_ext(x) (((x) >> 6) & 0x3ff)
#define b11s5_reg(x) (((x) >> 11) & 0x1f)
@@ -1578,6 +1592,18 @@ mips32_relative_offset (ULONGEST inst)
return ((itype_immediate (inst) ^ 0x8000) - 0x8000) << 2;
}
+static LONGEST
+mips32_relative_offset21 (ULONGEST insn)
+{
+ return ((b0s21_imm (insn) ^ 0x100000) - 0x100000) << 2;
+}
+
+static LONGEST
+mips32_relative_offset26 (ULONGEST insn)
+{
+ return ((b0s26_imm (insn) ^ 0x2000000) - 0x2000000) << 2;
+}
+
/* Determine the address of the next instruction executed after the INST
floating condition branch instruction at PC. COUNT specifies the
number of the floating condition bits tested by the branch. */
@@ -1636,6 +1662,71 @@ is_octeon_bbit_op (int op, struct gdbarch *gdbarch)
return 0;
}
+static int
+is_add32bit_overflow (int32_t a, int32_t b)
+{
+ int32_t r = (uint32_t) a + (uint32_t) b;
+ return (a < 0 && b < 0 && r >= 0) || (a >= 0 && b >= 0 && r < 0);
+}
+
+static int
+is_add64bit_overflow (int64_t a, int64_t b)
+{
+ if (a != (int32_t)a)
+ return 1;
+ if (b != (int32_t)b)
+ return 1;
+ return is_add32bit_overflow ((int32_t)a, (int32_t)b);
+}
+
+/* Calculate address of next instruction after BLEZ. */
+
+static CORE_ADDR
+mips32_blez_pc (struct gdbarch *gdbarch, struct regcache *regcache,
+ ULONGEST inst, CORE_ADDR pc, int invert)
+{
+ int rs = itype_rs (inst);
+ int rt = itype_rt (inst);
+ LONGEST val_rs = regcache_raw_get_signed (regcache, rs);
+ LONGEST val_rt = regcache_raw_get_signed (regcache, rt);
+ ULONGEST uval_rs = regcache_raw_get_unsigned (regcache, rs);
+ ULONGEST uval_rt = regcache_raw_get_unsigned (regcache, rt);
+ int taken = 0;
+ int delay_slot_size = 4;
+
+ /* BLEZ, BLEZL, BGTZ, BGTZL */
+ if (rt == 0)
+ taken = (val_rs <= 0);
+ else if (is_mipsr6_isa (gdbarch))
+ {
+ /* BLEZALC, BGTZALC */
+ if (rs == 0 && rt != 0)
+ taken = (val_rt <= 0);
+ /* BGEZALC, BLTZALC */
+ else if (rs == rt && rt != 0)
+ taken = (val_rt >= 0);
+ /* BGEUC, BLTUC */
+ else if (rs != rt && rs != 0 && rt != 0)
+ taken = (uval_rs >= uval_rt);
+
+ /* Step through the forbidden slot to avoid repeated exceptions we do
+ not currently have access to the BD bit when hitting a breakpoint
+ and therefore cannot tell if the breakpoint hit on the branch or the
+ forbidden slot. */
+ /* delay_slot_size = 0; */
+ }
+
+ if (invert)
+ taken = !taken;
+
+ /* Calculate branch target. */
+ if (taken)
+ pc += mips32_relative_offset (inst);
+ else
+ pc += delay_slot_size;
+
+ return pc;
+}
/* Determine where to set a single step breakpoint while considering
branch prediction. */
@@ -1646,12 +1737,17 @@ mips32_next_pc (struct regcache *regcache, CORE_ADDR pc)
struct gdbarch *gdbarch = regcache->arch ();
unsigned long inst;
int op;
+ int mips64bitreg = 0;
+
+ if (mips_isa_regsize (gdbarch) == 8)
+ mips64bitreg = 1;
+
inst = mips_fetch_instruction (gdbarch, ISA_MIPS, pc, NULL);
op = itype_op (inst);
if ((inst & 0xe0000000) != 0) /* Not a special, jump or branch
instruction. */
{
- if (op >> 2 == 5)
+ if (op >> 2 == 5 && ((op & 0x02) == 0 || itype_rt (inst) == 0))
/* BEQL, BNEL, BLEZL, BGTZL: bits 0101xx */
{
switch (op & 0x03)
@@ -1661,7 +1757,7 @@ mips32_next_pc (struct regcache *regcache, CORE_ADDR pc)
case 1: /* BNEL */
goto neq_branch;
case 2: /* BLEZL */
- goto less_branch;
+ goto lez_branch;
case 3: /* BGTZL */
goto greater_branch;
default:
@@ -1671,15 +1767,19 @@ mips32_next_pc (struct regcache *regcache, CORE_ADDR pc)
else if (op == 17 && itype_rs (inst) == 8)
/* BC1F, BC1FL, BC1T, BC1TL: 010001 01000 */
pc = mips32_bc1_pc (gdbarch, regcache, inst, pc + 4, 1);
- else if (op == 17 && itype_rs (inst) == 9
+ else if (!is_mipsr6_isa (gdbarch)
+ && op == 17
+ && itype_rs (inst) == 9
&& (itype_rt (inst) & 2) == 0)
/* BC1ANY2F, BC1ANY2T: 010001 01001 xxx0x */
pc = mips32_bc1_pc (gdbarch, regcache, inst, pc + 4, 2);
- else if (op == 17 && itype_rs (inst) == 10
- && (itype_rt (inst) & 2) == 0)
+ else if (!is_mipsr6_isa (gdbarch)
+ && op == 17
+ && itype_rs (inst) == 10
+ && (itype_rt (inst) & 2) == 0)
/* BC1ANY4F, BC1ANY4T: 010001 01010 xxx0x */
pc = mips32_bc1_pc (gdbarch, regcache, inst, pc + 4, 4);
- else if (op == 29)
+ else if (!is_mipsr6_isa (gdbarch) && op == 29)
/* JALX: 011101 */
/* The new PC will be alternate mode. */
{
@@ -1707,7 +1807,128 @@ mips32_next_pc (struct regcache *regcache, CORE_ADDR pc)
else
pc += 8; /* After the delay slot. */
}
+ else if (is_mipsr6_isa (gdbarch))
+ {
+ /* BOVC, BEQZALC, BEQC and BNVC, BNEZALC, BNEC */
+ if (op == 8 || op == 24)
+ {
+ int rs = rtype_rs (inst);
+ int rt = rtype_rt (inst);
+ LONGEST val_rs = regcache_raw_get_signed (regcache, rs);
+ LONGEST val_rt = regcache_raw_get_signed (regcache, rt);
+ int taken = 0;
+ /* BOVC (BNVC) */
+ if (rs >= rt)
+ {
+ if (mips64bitreg == 1)
+ taken = is_add64bit_overflow (val_rs, val_rt);
+ else
+ taken = is_add32bit_overflow (val_rs, val_rt);
+ }
+ /* BEQZALC (BNEZALC) */
+ else if (rs < rt && rs == 0)
+ taken = (val_rt == 0);
+ /* BEQC (BNEC) */
+ else
+ taken = (val_rs == val_rt);
+
+ /* BNVC, BNEZALC, BNEC */
+ if (op == 24)
+ taken = !taken;
+ if (taken)
+ pc += mips32_relative_offset (inst) + 4;
+ else
+ /* Step through the forbidden slot to avoid repeated exceptions
+ we do not currently have access to the BD bit when hitting a
+ breakpoint and therefore cannot tell if the breakpoint
+ hit on the branch or the forbidden slot. */
+ pc += 8;
+ }
+ /* BC1EQZ, BC1NEZ */
+ else if (op == 17 && (itype_rs (inst) == 9 || itype_rs (inst) == 13))
+ {
+ gdb_byte status;
+ gdb_byte true_val = 0;
+ unsigned int fp = (gdbarch_num_regs (gdbarch)
+ + mips_regnum (gdbarch)->fp0
+ + itype_rt (inst));
+ struct frame_info_ptr frame = get_current_frame ();
+ gdb_byte *raw_buffer = (gdb_byte *) alloca (sizeof (gdb_byte) * 4);
+ mips_read_fp_register_single (frame, fp, raw_buffer);
+
+ if (gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
+ status = *(raw_buffer + 3);
+ else
+ status = *(raw_buffer);
+
+ if (itype_rs (inst) == 13)
+ true_val = 1;
+
+ if ((status & 0x1) == true_val)
+ pc += mips32_relative_offset (inst) + 4;
+ else
+ pc += 8;
+ }
+ else if (op == 22 || op == 23)
+ /* BLEZC, BGEZC, BGEC, BGTZC, BLTZC, BLTC */
+ {
+ int rs = rtype_rs (inst);
+ int rt = rtype_rt (inst);
+ LONGEST val_rs = regcache_raw_get_signed (regcache, rs);
+ LONGEST val_rt = regcache_raw_get_signed (regcache, rt);
+ int taken = 0;
+ /* The R5 rt == 0 case is handled above so we treat it as
+ an unknown instruction here for future ISA usage. */
+ if (rs == 0 && rt != 0)
+ taken = (val_rt <= 0);
+ else if (rs == rt && rt != 0)
+ taken = (val_rt >= 0);
+ else if (rs != rt && rs != 0 && rt != 0)
+ taken = (val_rs >= val_rt);
+
+ if (op == 23)
+ taken = !taken;
+
+ if (taken)
+ pc += mips32_relative_offset (inst) + 4;
+ else
+ /* Step through the forbidden slot to avoid repeated exceptions
+ we do not currently have access to the BD bit when hitting a
+ breakpoint and therefore cannot tell if the breakpoint
+ hit on the branch or the forbidden slot. */
+ pc += 8;
+ }
+ else if (op == 50 || op == 58)
+ /* BC, BALC */
+ pc += mips32_relative_offset26 (inst) + 4;
+ else if ((op == 54 || op == 62)
+ && rtype_rs (inst) == 0)
+ /* JIC, JIALC */
+ {
+ pc = regcache_raw_get_signed (regcache, itype_rt (inst));
+ pc += (itype_immediate (inst) ^ 0x8000) - 0x8000;
+ }
+ else if (op == 54 || op == 62)
+ /* BEQZC, BNEZC */
+ {
+ int rs = itype_rs (inst);
+ LONGEST rs_val = regcache_raw_get_signed (regcache, rs);
+ int taken = (rs_val == 0);
+ if (op == 62)
+ taken = !taken;
+ if (taken)
+ pc += mips32_relative_offset21 (inst) + 4;
+ else
+ /* Step through the forbidden slot to avoid repeated exceptions
+ we do not currently have access to the BD bit when hitting a
+ breakpoint and therefore cannot tell if the breakpoint
+ hit on the branch or the forbidden slot. */
+ pc += 8;
+ }
+ else
+ pc += 4; /* Not a branch, next instruction is easy. */
+ }
else
pc += 4; /* Not a branch, next instruction is easy. */
}
@@ -1751,7 +1972,6 @@ mips32_next_pc (struct regcache *regcache, CORE_ADDR pc)
case 2: /* BLTZL */
case 16: /* BLTZAL */
case 18: /* BLTZALL */
- less_branch:
if (regcache_raw_get_signed (regcache, itype_rs (inst)) < 0)
pc += mips32_relative_offset (inst) + 4;
else
@@ -1767,22 +1987,38 @@ mips32_next_pc (struct regcache *regcache, CORE_ADDR pc)
pc += 8; /* after the delay slot */
break;
case 0x1c: /* BPOSGE32 */
+ case 0x1d: /* BPOSGE32C */
case 0x1e: /* BPOSGE64 */
pc += 4;
if (itype_rs (inst) == 0)
{
unsigned int pos = (op & 2) ? 64 : 32;
int dspctl = mips_regnum (gdbarch)->dspctl;
+ int delay_slot_size = 4;
if (dspctl == -1)
/* No way to handle; it'll most likely trap anyway. */
break;
+ /* BPOSGE32C */
+ if (op == 0x1d)
+ {
+ if (!is_mipsr6_isa (gdbarch))
+ break;
+
+ /* Step through the forbidden slot to avoid repeated
+ exceptions we do not currently have access to the BD
+ bit when hitting a breakpoint and therefore cannot
+ tell if the breakpoint hit on the branch or the
+ forbidden slot. */
+ /* delay_slot_size = 0; */
+ }
+
if ((regcache_raw_get_unsigned (regcache,
dspctl) & 0x7f) >= pos)
pc += mips32_relative_offset (inst);
else
- pc += 4;
+ pc += delay_slot_size;
}
break;
/* All of the other instructions in the REGIMM category */
@@ -1816,19 +2052,14 @@ mips32_next_pc (struct regcache *regcache, CORE_ADDR pc)
else
pc += 8;
break;
- case 6: /* BLEZ, BLEZL */
- if (regcache_raw_get_signed (regcache, itype_rs (inst)) <= 0)
- pc += mips32_relative_offset (inst) + 4;
- else
- pc += 8;
+ case 6: /* BLEZ, BLEZL, BLEZALC, BGEZALC, BGEUC */
+ lez_branch:
+ pc = mips32_blez_pc (gdbarch, regcache, inst, pc + 4, 0);
break;
case 7:
default:
- greater_branch: /* BGTZ, BGTZL */
- if (regcache_raw_get_signed (regcache, itype_rs (inst)) > 0)
- pc += mips32_relative_offset (inst) + 4;
- else
- pc += 8;
+ greater_branch: /* BGTZ, BGTZL, BGTZALC, BLTZALC, BLTUC */
+ pc = mips32_blez_pc (gdbarch, regcache, inst, pc + 4, 1);
break;
} /* switch */
} /* else */
@@ -2451,6 +2682,72 @@ micromips_instruction_is_compact_branch (unsigned short insn)
}
}
+/* Return non-zero if the MIPS instruction INSN is a compact branch
+ or jump. A value of 1 indicates an unconditional compact branch
+ and a value of 2 indicates a conditional compact branch. */
+
+static int
+mips32_instruction_is_compact_branch (struct gdbarch *gdbarch, ULONGEST insn)
+{
+ switch (itype_op (insn))
+ {
+ /* BC */
+ case 50:
+ /* BALC */
+ case 58:
+ if (is_mipsr6_isa (gdbarch))
+ return 1;
+ break;
+ /* BOVC, BEQZALC, BEQC */
+ case 8:
+ /* BNVC, BNEZALC, BNEC */
+ case 24:
+ if (is_mipsr6_isa (gdbarch))
+ return 2;
+ break;
+ /* BEQZC, JIC */
+ case 54:
+ /* BNEZC, JIALC */
+ case 62:
+ if (is_mipsr6_isa (gdbarch))
+ /* JIC, JIALC are unconditional */
+ return (itype_rs (insn) == 0) ? 1 : 2;
+ break;
+ /* BLEZC, BGEZC, BGEC */
+ case 22:
+ /* BGTZC, BLTZC, BLTC */
+ case 23:
+ /* BLEZALC, BGEZALC, BGEUC */
+ case 6:
+ /* BGTZALC, BLTZALC, BLTUC */
+ case 7:
+ if (is_mipsr6_isa (gdbarch)
+ && itype_rt (insn) != 0)
+ return 2;
+ break;
+ /* BPOSGE32C */
+ case 1:
+ if (is_mipsr6_isa (gdbarch)
+ && itype_rt (insn) == 0x1d && itype_rs (insn) == 0)
+ return 2;
+ }
+ return 0;
+}
+
+/* Return non-zero if a standard MIPS instruction at ADDR has a branch
+ forbidden slot (i.e. it is a conditional compact branch instruction). */
+
+static int
+mips32_insn_at_pc_has_forbidden_slot (struct gdbarch *gdbarch, CORE_ADDR addr)
+{
+ int status;
+ ULONGEST insn = mips_fetch_instruction (gdbarch, ISA_MIPS, addr, &status);
+ if (status)
+ return 0;
+
+ return mips32_instruction_is_compact_branch (gdbarch, insn) == 2;
+}
+
struct mips_frame_cache
{
CORE_ADDR base;
@@ -3494,7 +3791,8 @@ mips32_scan_prologue (struct gdbarch *gdbarch,
reg = high_word & 0x1f;
if (high_word == 0x27bd /* addiu $sp,$sp,-i */
- || high_word == 0x23bd /* addi $sp,$sp,-i */
+ || (high_word == 0x23bd /* addi $sp,$sp,-i */
+ && !is_mipsr6_isa (gdbarch))
|| high_word == 0x67bd) /* daddiu $sp,$sp,-i */
{
if (offset < 0) /* Negative stack adjustment? */
@@ -3632,7 +3930,9 @@ mips32_scan_prologue (struct gdbarch *gdbarch,
/* A jump or branch, or enough non-prologue insns seen? If so,
then we must have reached the end of the prologue by now. */
- if (prev_delay_slot || non_prologue_insns > 1)
+ if (prev_delay_slot
+ || non_prologue_insns > 1
+ || mips32_instruction_is_compact_branch (gdbarch, inst))
break;
prev_non_prologue_insn = this_non_prologue_insn;
@@ -3938,6 +4238,59 @@ mips_addr_bits_remove (struct gdbarch *gdbarch, CORE_ADDR addr)
#define LLD_OPCODE 0x34
#define SC_OPCODE 0x38
#define SCD_OPCODE 0x3c
+#define LLSC_R6_OPCODE 0x1f
+#define LL_R6_FUNCT 0x36
+#define LLE_FUNCT 0x2e
+#define LLD_R6_FUNCT 0x37
+#define SC_R6_FUNCT 0x26
+#define SCE_FUNCT 0x1e
+#define SCD_R6_FUNCT 0x27
+
+static int
+is_ll_insn (struct gdbarch *gdbarch, ULONGEST insn)
+{
+ if (itype_op (insn) == LL_OPCODE
+ || itype_op (insn) == LLD_OPCODE)
+ return 1;
+
+ if (rtype_op (insn) == LLSC_R6_OPCODE
+ && rtype_funct (insn) == LLE_FUNCT
+ && (insn & 0x40) == 0)
+ return 1;
+
+ /* Handle LL and LLP varieties. */
+ if (is_mipsr6_isa (gdbarch)
+ && rtype_op (insn) == LLSC_R6_OPCODE
+ && (rtype_funct (insn) == LL_R6_FUNCT
+ || rtype_funct (insn) == LLD_R6_FUNCT
+ || rtype_funct (insn) == LLE_FUNCT))
+ return 1;
+
+ return 0;
+}
+
+static int
+is_sc_insn (struct gdbarch *gdbarch, ULONGEST insn)
+{
+ if (itype_op (insn) == SC_OPCODE
+ || itype_op (insn) == SCD_OPCODE)
+ return 1;
+
+ if (rtype_op (insn) == LLSC_R6_OPCODE
+ && rtype_funct (insn) == SCE_FUNCT
+ && (insn & 0x40) == 0)
+ return 1;
+
+ /* Handle SC and SCP varieties. */
+ if (is_mipsr6_isa (gdbarch)
+ && rtype_op (insn) == LLSC_R6_OPCODE
+ && (rtype_funct (insn) == SC_R6_FUNCT
+ || rtype_funct (insn) == SCD_R6_FUNCT
+ || rtype_funct (insn) == SCE_FUNCT))
+ return 1;
+
+ return 0;
+}
static std::vector<CORE_ADDR>
mips_deal_with_atomic_sequence (struct gdbarch *gdbarch, CORE_ADDR pc)
@@ -3950,10 +4303,11 @@ mips_deal_with_atomic_sequence (struct gdbarch *gdbarch, CORE_ADDR pc)
int index;
int last_breakpoint = 0; /* Defaults to 0 (no breakpoints placed). */
const int atomic_sequence_length = 16; /* Instruction sequence length. */
+ int is_mipsr6 = is_mipsr6_isa (gdbarch);
insn = mips_fetch_instruction (gdbarch, ISA_MIPS, loc, NULL);
/* Assume all atomic sequences start with a ll/lld instruction. */
- if (itype_op (insn) != LL_OPCODE && itype_op (insn) != LLD_OPCODE)
+ if (!is_ll_insn (gdbarch, insn))
return {};
/* Assume that no atomic sequence is longer than "atomic_sequence_length"
@@ -3983,28 +4337,72 @@ mips_deal_with_atomic_sequence (struct gdbarch *gdbarch, CORE_ADDR pc)
return {}; /* fallback to the standard single-step code. */
case 4: /* BEQ */
case 5: /* BNE */
- case 6: /* BLEZ */
- case 7: /* BGTZ */
case 20: /* BEQL */
case 21: /* BNEL */
- case 22: /* BLEZL */
- case 23: /* BGTTL */
+ case 22: /* BLEZL (BLEZC, BGEZC, BGEC) */
+ case 23: /* BGTZL (BGTZC, BLTZC, BLTC) */
+ is_branch = 1;
+ break;
+ case 6: /* BLEZ (BLEZALC, BGEZALC, BGEUC) */
+ case 7: /* BGTZ (BGTZALC, BLTZALC, BLTUC) */
+ if (is_mipsr6)
+ {
+ /* BLEZALC, BGTZALC */
+ if (itype_rs (insn) == 0 && itype_rt (insn) != 0)
+ return {}; /* fallback to the standard single-step code. */
+ /* BGEZALC, BLTZALC */
+ else if (itype_rs (insn) == itype_rt (insn)
+ && itype_rt (insn) != 0)
+ return {}; /* fallback to the standard single-step code. */
+ }
is_branch = 1;
break;
+ case 8: /* BOVC, BEQZALC, BEQC */
+ case 24: /* BNVC, BNEZALC, BNEC */
+ if (is_mipsr6)
+ is_branch = 1;
+ break;
+ case 50: /* BC */
+ case 58: /* BALC */
+ if (is_mipsr6)
+ return {}; /* fallback to the standard single-step code. */
+ break;
+ case 54: /* BEQZC, JIC */
+ case 62: /* BNEZC, JIALC */
+ if (is_mipsr6)
+ {
+ if (itype_rs (insn) == 0) /* JIC, JIALC */
+ return {}; /* fallback to the standard single-step code. */
+ else
+ is_branch = 2; /* Marker for branches with a 21-bit offset. */
+ }
+ break;
case 17: /* COP1 */
- is_branch = ((itype_rs (insn) == 9 || itype_rs (insn) == 10)
- && (itype_rt (insn) & 0x2) == 0);
- if (is_branch) /* BC1ANY2F, BC1ANY2T, BC1ANY4F, BC1ANY4T */
+ is_branch = ((!is_mipsr6
+ /* BC1ANY2F, BC1ANY2T, BC1ANY4F, BC1ANY4T */
+ && (itype_rs (insn) == 9 || itype_rs (insn) == 10)
+ && (itype_rt (insn) & 0x2) == 0)
+ /* BZ.df: 010001 110xx */
+ || (itype_rs (insn) & 0x18) == 0x18);
+ if (is_branch)
break;
[[fallthrough]];
case 18: /* COP2 */
case 19: /* COP3 */
- is_branch = (itype_rs (insn) == 8); /* BCzF, BCzFL, BCzT, BCzTL */
+ /* BCzF, BCzFL, BCzT, BCzTL, BC*EQZ, BC*NEZ */
+ is_branch = ((itype_rs (insn) == 8)
+ || (is_mipsr6
+ && (itype_rs (insn) == 9
+ || itype_rs (insn) == 13)));
break;
}
if (is_branch)
{
- branch_bp = loc + mips32_relative_offset (insn) + 4;
+ /* Is this a special PC21_S2 branch? */
+ if (is_branch == 2)
+ branch_bp = loc + mips32_relative_offset21 (insn) + 4;
+ else
+ branch_bp = loc + mips32_relative_offset (insn) + 4;
if (last_breakpoint >= 1)
return {}; /* More than one branch found, fallback to the
standard single-step code. */
@@ -4012,12 +4410,12 @@ mips_deal_with_atomic_sequence (struct gdbarch *gdbarch, CORE_ADDR pc)
last_breakpoint++;
}
- if (itype_op (insn) == SC_OPCODE || itype_op (insn) == SCD_OPCODE)
+ if (is_sc_insn (gdbarch, insn))
break;
}
/* Assume that the atomic sequence ends with a sc/scd instruction. */
- if (itype_op (insn) != SC_OPCODE && itype_op (insn) != SCD_OPCODE)
+ if (!is_sc_insn (gdbarch, insn))
return {};
loc += MIPS_INSN32_SIZE;
@@ -4242,8 +4640,14 @@ mips_about_to_return (struct gdbarch *gdbarch, CORE_ADDR pc)
gdb_assert (mips_pc_is_mips (pc));
insn = mips_fetch_instruction (gdbarch, ISA_MIPS, pc, NULL);
- hint = 0x7c0;
- return (insn & ~hint) == 0x3e00008; /* jr(.hb) $ra */
+ /* Mask the hint and the jalr/jr bit. */
+ hint = 0x7c1;
+
+ if (is_mipsr6_isa (gdbarch) && insn == 0xd81f0000) /* jrc $31 */
+ return 1;
+
+ /* jr(.hb) $ra and "jalr(.hb) $ra" */
+ return ((insn & ~hint) == 0x3e00008);
}
@@ -6760,7 +7164,9 @@ mips32_stack_frame_destroyed_p (struct gdbarch *gdbarch, CORE_ADDR pc)
if (high_word != 0x27bd /* addiu $sp,$sp,offset */
&& high_word != 0x67bd /* daddiu $sp,$sp,offset */
- && inst != 0x03e00008 /* jr $ra */
+ && (inst & ~0x1) != 0x03e00008 /* jr $31 or jalr $0, $31 */
+ && (!is_mipsr6_isa (gdbarch)
+ || inst != 0xd81f0000) /* jrc $31 */
&& inst != 0x00000000) /* nop */
return 0;
}
@@ -7139,22 +7545,31 @@ mips32_instruction_has_delay_slot (struct gdbarch *gdbarch, ULONGEST inst)
int op;
int rs;
int rt;
+ int is_mipsr6 = is_mipsr6_isa (gdbarch);
op = itype_op (inst);
if ((inst & 0xe0000000) != 0)
{
rs = itype_rs (inst);
rt = itype_rt (inst);
- return (is_octeon_bbit_op (op, gdbarch)
- || op >> 2 == 5 /* BEQL, BNEL, BLEZL, BGTZL: bits 0101xx */
- || op == 29 /* JALX: bits 011101 */
+ return (is_octeon_bbit_op (op, gdbarch)
+ || (op >> 1 == 10) /* BEQL, BNEL: bits 01010x */
+ || (op >> 1 == 11 && rt == 0) /* BLEZL, BGTZL: bits 01011x */
+ || (!is_mipsr6 && op == 29) /* JALX: bits 011101 */
|| (op == 17
&& (rs == 8
/* BC1F, BC1FL, BC1T, BC1TL: 010001 01000 */
- || (rs == 9 && (rt & 0x2) == 0)
+ || (!is_mipsr6 && rs == 9 && (rt & 0x2) == 0)
/* BC1ANY2F, BC1ANY2T: bits 010001 01001 */
- || (rs == 10 && (rt & 0x2) == 0))));
+ || (!is_mipsr6 && rs == 10 && (rt & 0x2) == 0)))
/* BC1ANY4F, BC1ANY4T: bits 010001 01010 */
+ || (is_mipsr6
+ && ((op == 17
+ && (rs == 9 /* BC1EQZ: 010001 01001 */
+ || rs == 13)) /* BC1NEZ: 010001 01101 */
+ || (op == 18
+ && (rs == 9 /* BC2EQZ: 010010 01001 */
+ || rs == 13))))); /* BC2NEZ: 010010 01101 */
}
else
switch (op & 0x07) /* extract bits 28,27,26 */
@@ -7173,7 +7588,11 @@ mips32_instruction_has_delay_slot (struct gdbarch *gdbarch, ULONGEST inst)
|| ((rt & 0x1e) == 0x1c && rs == 0));
/* BPOSGE32, BPOSGE64: bits 1110x */
break; /* end REGIMM */
- default: /* J, JAL, BEQ, BNE, BLEZ, BGTZ */
+ case 6: /* BLEZ */
+ case 7: /* BGTZ */
+ return (itype_rt (inst) == 0);
+ break;
+ default: /* J, JAL, BEQ, BNE */
return 1;
break;
}
@@ -7385,7 +7804,18 @@ mips_adjust_breakpoint_address (struct gdbarch *gdbarch, CORE_ADDR bpaddr)
So, we'll use the second solution. To do this we need to know if
the instruction we're trying to set the breakpoint on is in the
- branch delay slot. */
+ branch delay slot.
+
+ A similar problem occurs for breakpoints on forbidden slots where
+ the trap will be reported for the branch with the BD bit set.
+ In this case it would be ideal to recover using solution 1 from
+ above as there is no problem with the branch being skipped
+ (since the forbidden slot only exists on not-taken branches).
+ However, the BD bit is not available in all scenarios currently
+ so instead we move the breakpoint on to the next instruction.
+ This means that it is not possible to stop on an instruction
+ that can be in a forbidden slot even if that instruction is
+ jumped to directly. */
boundary = mips_segment_boundary (bpaddr);
@@ -7407,6 +7837,12 @@ mips_adjust_breakpoint_address (struct gdbarch *gdbarch, CORE_ADDR bpaddr)
prev_addr = bpaddr - 4;
if (mips32_insn_at_pc_has_delay_slot (gdbarch, prev_addr))
bpaddr = prev_addr;
+ /* If the previous instruction has a forbidden slot, we have to
+ move the breakpoint to the following instruction to prevent
+ breakpoints in forbidden slots being reported as unknown
+ traps. */
+ else if (mips32_insn_at_pc_has_forbidden_slot (gdbarch, prev_addr))
+ bpaddr += 4;
}
else
{
diff --git a/gdb/testsuite/gdb.arch/mips-64-r6.c b/gdb/testsuite/gdb.arch/mips-64-r6.c
new file mode 100644
index 00000000000..833274cef36
--- /dev/null
+++ b/gdb/testsuite/gdb.arch/mips-64-r6.c
@@ -0,0 +1,1469 @@
+/*
+ Copyright 2006-2024 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdio.h>
+
+#define xstr(s) str(s)
+#define str(s) #s
+
+/* ============ macros from sim/testutils/mips/utils-r6.inc ============= */
+
+// 58 is local label to exit with errcode != 0
+#define fp_assert(a, b) "beq " xstr(a) ", " xstr(b) ", 1f \n\t" \
+ "nop \n\t" \
+ "b 58f \n\t" \
+ "nop \n\t" \
+ "1: \n\t"
+
+// Clobbers: $4,$6,$7
+#define r6ck_1r(inst, a, ret) \
+ "li $4, " xstr(a) " \n\t" \
+ "li $6, " xstr(ret) " \n\t" \
+ xstr(inst) " $7, $4 \n\t" \
+ fp_assert($6, $7)
+
+// Clobbers: $4,$6,$7
+#define r6ck_1dr(inst, a, ret) \
+ "ld $4, " xstr(a) " \n\t" \
+ "ld $6, " xstr(ret) " \n\t" \
+ xstr(inst) " $7, $4 \n\t" \
+ fp_assert($6, $7)
+
+// Clobbers: $4,$5,$6,$7
+#define r6ck_2r(inst, a, b, ret) \
+ "li $4, " xstr(a) " \n\t" \
+ "li $5, " xstr(b) " \n\t" \
+ "li $6, " xstr(ret) " \n\t" \
+ xstr(inst) " $7, $4, $5 \n\t" \
+ fp_assert($6, $7)
+
+// Clobbers: $4,$5,$6,$7
+#define r6ck_2dr(inst, a, b, ret) \
+ "ld $4, " xstr(a) " \n\t" \
+ "ld $5, " xstr(b) " \n\t" \
+ "ld $6, " xstr(ret) " \n\t" \
+ xstr(inst) " $7, $4, $5 \n\t" \
+ fp_assert($6, $7)
+
+// Clobbers: $4,$5,$6,$7
+#define r6ck_2dr1i(inst, a, b, imm, ret) \
+ "ld $4, " xstr(a) " \n\t" \
+ "ld $5, " xstr(b) " \n\t" \
+ "ld $6, " xstr(ret) " \n\t" \
+ xstr(inst) " $7, $4, $5, " xstr(imm) " \n\t" \
+ fp_assert($6, $7)
+
+// Clobbers: $4,$6,$7
+#define r6ck_1r1i(inst, a, imm, ret) \
+ "li $4, " xstr(a) " \n\t" \
+ "li $6, " xstr(ret) " \n\t" \
+ xstr(inst) " $7, $4, " xstr(imm) " \n\t" \
+ fp_assert($6, $7)
+
+// Clobbers: $4,$6,$7
+#define r6ck_1dr1i(inst, a, imm, ret) \
+ "ld $4, " xstr(a) " \n\t" \
+ "ld $6, " xstr(ret) " \n\t" \
+ xstr(inst) " $7, $4, " xstr(imm) " \n\t" \
+ fp_assert($6, $7)
+
+// Clobbers: $4,$6
+#define r6ck_0dr1i(inst, a, imm, ret) \
+ "ld $4, " xstr(a) " \n\t" \
+ "ld $6, " xstr(ret) " \n\t" \
+ xstr(inst) " $4, $4, " xstr(imm) " \n\t" \
+ fp_assert($6, $4)
+
+// Clobbers: $4,$5,$6,$7
+#define r6ck_2r1i(inst, a, b, imm, ret) \
+ "li $4, " xstr(a) " \n\t" \
+ "li $5, " xstr(b) " \n\t" \
+ "li $6, " xstr(ret) " \n\t" \
+ xstr(inst) " $7, $4, $5, " xstr(imm) " \n\t" \
+ fp_assert($6, $7)
+
+// Clobbers: $4,$5,$6,$7,$8,$f2,$f4,$f6
+#define r6ck_3s(inst, a, b, c, ret) \
+ "li $4, " xstr(a) " \n\t" \
+ "li $5, " xstr(b) " \n\t" \
+ "li $6, " xstr(c) " \n\t" \
+ "li $7, " xstr(ret) " \n\t" \
+ "mtc1 $4, $f2 \n\t" \
+ "mtc1 $5, $f4 \n\t" \
+ "mtc1 $6, $f6 \n\t" \
+ xstr(inst) " $f2, $f4, $f6 \n\t" \
+ "mfc1 $8, $f2 \n\t" \
+ fp_assert($7, $8)
+
+// Clobbers: $4,$5,$6,$7,$f2,$f4
+#define r6ck_2s(inst, a, b, ret) \
+ "li $4, " xstr(a) " \n\t" \
+ "li $5, " xstr(b) " \n\t" \
+ "li $6, " xstr(ret) " \n\t" \
+ "mtc1 $4, $f2 \n\t" \
+ "mtc1 $5, $f4 \n\t" \
+ xstr(inst) " $f2, $f4 \n\t" \
+ "mfc1 $7, $f2 \n\t" \
+ fp_assert($6, $7)
+
+// Clobbers: $4,$5,$6,$7,$8,$9,$10,$f2,$f4
+#define r6ck_2d(inst, a, b, ret) \
+ ".data \n\t" \
+"1: .dword " xstr(a) " \n\t" \
+"2: .dword " xstr(b) " \n\t" \
+"3: .dword " xstr(ret) " \n\t" \
+" .text \n\t" \
+ "la $4, 1b \n\t" \
+ "la $5, 2b \n\t" \
+ "la $6, 3b \n\t" \
+ "ldc1 $f2, 0($4) \n\t" \
+ "ldc1 $f4, 0($5) \n\t" \
+ "lw $7, 0($6) \n\t" \
+ "lw $8, 4($6) \n\t" \
+ xstr(inst) " $f2, $f4 \n\t" \
+ "mfhc1 $9, $f2 \n\t" \
+ "mfc1 $10, $f2 \n\t" \
+ fp_assert($7, $9) \
+ fp_assert($8, $10)
+
+// Clobbers: $2,$4,$5,$6,$7,$8,$9,$10,$f2,$f4,$f6
+#define r6ck_3d(inst, a, b, c, ret) \
+ ".data \n\t" \
+"1: .dword " xstr(a) " \n\t" \
+"2: .dword " xstr(b) " \n\t" \
+"3: .dword " xstr(c) " \n\t" \
+"4: .dword " xstr(ret) " \n\t" \
+ ".text \n\t" \
+ "la $4, 1b \n\t" \
+ "la $5, 2b \n\t" \
+ "la $6, 3b \n\t" \
+ "la $2, 4b \n\t" \
+ "ldc1 $f2, 0($4) \n\t" \
+ "ldc1 $f4, 0($5) \n\t" \
+ "ldc1 $f6, 0($6) \n\t" \
+ "lw $7, 0($2) \n\t" \
+ "lw $8, 4($2) \n\t" \
+ xstr(inst) " $f2, $f4, $f6 \n\t" \
+ "mfhc1 $9, $f2 \n\t" \
+ "mfc1 $10, $f2 \n\t" \
+ fp_assert($7, $9) \
+ fp_assert($8, $10)
+
+
+/* ============ macros from sim/testutils/mips/testutils.inc ============= */
+
+/* Put value 'val' into register 'reg'
+ * Clobbers: None */
+#define load32(reg, val) \
+ "li " xstr(reg) ", " xstr(val) " \n\t"
+
+/* Check whether two registers contain the same value
+ * Clobbers: None */
+#define checkreg(reg, expreg) \
+ ".set push \n\t" \
+ ".set noat \n\t" \
+ ".set noreorder \n\t" \
+ "beq " xstr(expreg) ", " xstr(reg) ", 901f \n\t" \
+ "nop \n\t" \
+ "b 58f \n\t" \
+ "nop \n\t" \
+"901: \n\t" \
+ ".set pop \n\t"
+
+/* Check if register 'reg' contains value 'val'.
+ * Clobbers: $1 */
+#define check32(reg, val) \
+ ".set push \n\t" \
+ ".set noat \n\t" \
+ load32($1, val) \
+ checkreg(reg, $1) \
+ ".set pop \n\t"
+
+/* Checkpair based on endianess
+ * Clobbers: $1 */
+#define checkpair_xendian(lo, hi, base, ec, w) \
+ ".set noat \n\t" \
+ "lw $1, " xstr(ec) " \n\t" \
+ "andi $1, $1, 0x1 \n\t" \
+ "beqz $1, 2f \n\t" \
+ ".set at \n\t" \
+"1: \n\t" \
+ checkpair_be_##w(lo, hi, base) \
+ "b 3f \n\t" \
+ "nop \n\t" \
+"2: \n\t" \
+ checkpair_le_##w(lo, hi, base) \
+"3: \n\t"
+
+/*
+ checkpair_xendian($2, $3, test_data_2, end_check_2, d)
+=
+"lw $1, end_check_2 \n\t"
+"andi $1, $1, 0x1 \n\t"
+"beqz $1, 2f \n\t"
+"1: \n\t"
+checkpair_be_d($2, $3, test_data_2) = checkpair($2, $3, test_data_2, w, 4, 0)
+"b 3f \n\t"
+"nop \n\t"
+"2: \n\t"
+checkpair_le_d($2, $3, test_data_2) = checkpair($2, $3, test_data_2, w, 0, 4)
+"3: \n\t"
+*/
+
+/* Check hi-lo register pair against data stored at base+o1 and base+o2
+ * Clobbers: $1 - $5 */
+#define checkpair(lo, hi, base, w, o1, o2) \
+ "move $2, " xstr(lo) " \n\t" \
+ "move $3, " xstr(hi) " \n\t" \
+ ".set noat \n\t" \
+ "la $1, " xstr(base) " \n\t" \
+ "l" xstr(w) " $4, " xstr(o1) "($1) \n\t" \
+ "l" xstr(w) " $5, " xstr(o2) "($1) \n\t" \
+ ".set at \n\t" \
+ checkreg($2, $4) \
+ checkreg($3, $5)
+
+#define checkpair_le_d(lo, hi, base) \
+ checkpair(lo, hi, base, w, 0, 4)
+
+#define checkpair_be_d(lo, hi, base) \
+ checkpair(lo, hi, base, w, 4, 0)
+
+
+#define checkpair_le_q(lo, hi, base) \
+ checkpair(lo, hi, base, d, 0, 8)
+
+#define checkpair_be_q(lo, hi, base) \
+ checkpair(lo, hi, base, d, 8, 0)
+
+#define checkpair_qword(lo, hi, base, oe) \
+ checkpair_xendian(lo, hi, base, oe, q)
+
+#define checkpair_dword(lo, hi, base, oe) \
+ checkpair_xendian(lo, hi, base, oe, d)
+
+void abort (void);
+
+
+int test_r6_branch()
+{
+ // using volatile to prevent certain optimizations which could cause instruction deletion
+ volatile int err = -1; // identifies instruction which caused error. (err == 0) ==> all instructions executed successfully
+
+ volatile int a14 = 0xffffffff; // the other variables are bound to registers
+ volatile int a13 = 0x123;
+ volatile int a12 = 0x45;
+ volatile int a7 = 0x45;
+ volatile int a8 = 0xfffffffe;
+ volatile int a9 = 2147483647;
+ volatile int a11 = 0;
+ volatile int a10 = 0;
+ asm (
+ ".set push \n\t" // create new scope for asm configuration
+ ".set noreorder \n\t" // don't allow reordering of instructions
+ "li %[err], 1 \n\t"
+ "bovc %[a12], %[a13], Lfail \n\t" // BOVC
+ "nop \n\t"
+ "bovc %[a9], %[a13], L2 \n\t"
+ "nop \n\t"
+ "b Lfail \n\t"
+ "nop \n\t"
+ "L2: \n\t"
+ "li %[err], 2 \n\t"
+ "bnvc %[a9], %[a13], Lfail \n\t" // BNVC
+ "nop \n\t"
+ "bnvc %[a12], %[a13], L3 \n\t"
+ "nop \n\t"
+ "b Lfail \n\t"
+ "nop \n\t"
+ "L3: \n\t"
+ "li %[err], 3 \n\t"
+ "beqc %[a12], %[a13], Lfail \n\t" // BEQC
+ "nop \n\t"
+ "beqc %[a12], %[a7], L4 \n\t"
+ "nop \n\t"
+ "b Lfail \n\t"
+ "nop \n\t"
+ "L4: \n\t"
+ "li %[err], 4 \n\t"
+ "bnec %[a12], %[a7], Lfail \n\t" // BNEC
+ "nop \n\t"
+ "bnec %[a12], %[a13], L5 \n\t"
+ "nop \n\t"
+ "b Lfail \n\t"
+ "nop \n\t"
+ "L5: \n\t"
+ "li %[err], 5 \n\t"
+ "bltc %[a13], %[a12], Lfail \n\t" // BLTC
+ "nop \n\t"
+ "bltc %[a12], %[a13], L6 \n\t"
+ "nop \n\t"
+ "b Lfail \n\t"
+ "nop \n\t"
+ "L6: \n\t"
+ "L7: \n\t"
+ "li %[err], 7 \n\t"
+ "bgec %[a12], %[a13], Lfail \n\t" // BGEC
+ "nop \n\t"
+ "bgec %[a13], %[a12], L8 \n\t"
+ "nop \n\t"
+ "b Lfail \n\t"
+ "nop \n\t"
+ "L8: \n\t"
+ "L9: \n\t"
+ "li %[err], 9 \n\t"
+ "bltuc %[a14], %[a13], Lfail \n\t" // BLTUC
+ "nop \n\t"
+ "bltuc %[a8], %[a14], L10 \n\t"
+ "nop \n\t"
+ "b Lfail \n\t"
+ "nop \n\t"
+ "L10: \n\t"
+ "L11: \n\t"
+ "li %[err], 11 \n\t"
+ "bgeuc %[a13], %[a14], Lfail \n\t" // BGEUC
+ "nop \n\t"
+ "bgeuc %[a14], %[a8], L12 \n\t"
+ "nop \n\t"
+ "b Lfail \n\t"
+ "nop \n\t"
+ "L12: \n\t"
+ "L13: \n\t"
+ "li %[err], 13 \n\t"
+ "bltzc %[a13], Lfail \n\t" // BLTZC
+ "nop \n\t"
+ "bltzc %[a11], Lfail \n\t"
+ "nop \n\t"
+ "bltzc %[a14], L14 \n\t"
+ "nop \n\t"
+ "b Lfail \n\t"
+ "nop \n\t"
+ "L14: \n\t"
+ "li %[err], 14 \n\t"
+ "blezc %[a13], Lfail \n\t" // BLEZC
+ "nop \n\t"
+ "blezc %[a11], L145 \n\t"
+ "nop \n\t"
+ "b Lfail \n\t"
+ "nop \n\t"
+ "L145: \n\t"
+ "blezc %[a14], L15 \n\t"
+ "nop \n\t"
+ "b Lfail \n\t"
+ "nop \n\t"
+ "L15: \n\t"
+ "li %[err], 15 \n\t"
+ "bgezc %[a8], Lfail \n\t" // BGEZC
+ "nop \n\t"
+ "bgezc %[a11], L155 \n\t"
+ "nop \n\t"
+ "b Lfail \n\t"
+ "nop \n\t"
+ "L155: \n\t"
+ "bgezc %[a13], L16 \n\t"
+ "nop \n\t"
+ "b Lfail \n\t"
+ "nop \n\t"
+ "L16: \n\t"
+ "li %[err], 16 \n\t"
+ "bgtzc %[a8], Lfail \n\t" // BGTZC
+ "nop \n\t"
+ "bgtzc %[a11], Lfail \n\t"
+ "nop \n\t"
+ "bgtzc %[a13], L17 \n\t"
+ "nop \n\t"
+ "b Lfail \n\t"
+ "nop \n\t"
+ "li %[a10], 0 \n\t"
+ "L17: \n\t"
+ "li %[err], 17 \n\t"
+ "blezalc %[a12], Lfail \n\t" // BLEZALC
+ "nop \n\t"
+ "blezalc %[a11], Lret \n\t"
+ "li %[a10], 1 \n\t"
+ "beqzc %[a10], L175 \n\t" // BEQZC
+ "nop \n\t"
+ "li %[err], 8531 \n\t"
+ "b Lfail \n\t"
+ "nop \n\t"
+ "L175: \n\t"
+ "li %[err], 23531 \n\t"
+ "blezalc %[a14], Lret \n\t"
+ "li %[a10], 1 \n\t"
+ "beqzc %[a10], L18 \n\t"
+ "nop \n\t"
+ "b Lfail \n\t"
+ "nop \n\t"
+ "L18: \n\t"
+ "li %[err], 18 \n\t"
+ "bgezalc %[a14], Lfail \n\t" // BGEZALC
+ "nop \n\t"
+ "bgezalc %[a11], Lret \n\t"
+ "li %[a10], 1 \n\t"
+ "beqzc %[a10], L185 \n\t"
+ "nop \n\t"
+ "b Lfail \n\t"
+ "nop \n\t"
+ "L185: \n\t"
+ "bgezalc %[a12], Lret \n\t"
+ "li %[a10], 1 \n\t"
+ "beqzc %[a10], L19 \n\t"
+ "nop \n\t"
+ "b Lfail \n\t"
+ "nop \n\t"
+ "L19: \n\t"
+ "li %[err], 19 \n\t"
+ "bgtzalc %[a14], Lfail \n\t" // BGTZALC
+ "nop \n\t"
+ "bgtzalc %[a11], Lfail \n\t"
+ "nop \n\t"
+ "bgtzalc %[a12], Lret \n\t"
+ "li %[a10], 1 \n\t"
+ "beqzc %[a10], L20 \n\t"
+ "nop \n\t"
+ "b Lfail \n\t"
+ "nop \n\t"
+ "L20: \n\t"
+ "li %[err], 20 \n\t"
+ "bltzalc %[a12], Lfail \n\t" // BLTZALC
+ "nop \n\t"
+ "bltzalc %[a11], Lfail \n\t"
+ "nop \n\t"
+ "bltzalc %[a14], Lret \n\t"
+ "li %[a10], 1 \n\t"
+ "beqzc %[a10], L21 \n\t"
+ "nop \n\t"
+ "b Lfail \n\t"
+ "nop \n\t"
+ "L21: \n\t"
+ "li %[err], 21 \n\t"
+ "bc L22 \n\t" // BC
+ "b Lfail \n\t"
+ "nop \n\t"
+ "L22: \n\t"
+ "li %[err], 22 \n\t"
+ "balc Lret \n\t" // BALC
+ "li %[a10], 1 \n\t"
+ "beqzc %[a10], L23 \n\t"
+ "nop \n\t"
+ "b Lfail \n\t"
+ "nop \n\t"
+ "L23: \n\t"
+ "li %[err], 23 \n\t"
+ "jal GetPC \n\t" // JAL
+ "nop \n\t"
+ "jic $6, 4 \n\t" // JIC
+ "nop \n\t"
+ "b Lfail \n\t"
+ "nop \n\t"
+ "L24: \n\t"
+ "li %[err], 24 \n\t"
+ "li %[a10], 1 \n\t"
+ "jal GetPC \n\t"
+ "nop \n\t"
+ "jialc $6, 20 \n\t" // JIALC
+ "nop \n\t"
+ "beqzc %[a10], L25 \n\t"
+ "nop \n\t"
+ "b Lfail \n\t"
+ "nop \n\t"
+ "LJIALCRET: \n\t"
+ "li %[a10], 0 \n\t"
+ "jr $31 \n\t" // JR
+ "nop \n\t"
+ "L25: \n\t"
+ "li %[err], 25 \n\t"
+ "jal GetPC \n\t"
+ "nop \n\t"
+ "move %[a11], $6 \n\t"
+ "nal \n\t"
+ "nop \n\t"
+ "addiu %[a11], 12 \n\t" // ADDIU
+ "beqc %[a11], $31, L26 \n\t"
+ "nop \n\t"
+ "b Lfail \n\t"
+ "nop \n\t"
+ "L26: \n\t"
+ "li %[err], 26 \n\t"
+ "balc Lret \n\t"
+ "li %[a10], 1 \n\t"
+ "beqzc %[a10], Lend \n\t"
+ "nop \n\t"
+ "b Lfail \n\t"
+ "nop \n\t"
+ "Lret: \n\t"
+ "li %[a10], 0 \n\t"
+ "daddiu $31, 4 \n\t" // DADDIU
+ "jrc $31 \n\t" // JRC
+ "nop \n\t"
+ "GetPC: \n\t"
+ "move $6, $31 \n\t"
+ "jr $31 \n\t"
+ "Lend: \n\t"
+ "li %[err], 0 \n\t"
+ "Lfail: \n\t"
+ ".set pop \n\t" // restore previous config
+ : [err] "+r"(err), [a14] "+r"(a14), [a13] "+r"(a13), [a12] "+r"(a12),
+ [a7] "+r"(a7), [a8] "+r"(a8), [a9] "+r"(a9), [a10] "+r"(a10), [a11] "+r"(a11)
+ : // inputs
+ : "$31", "$6" // clobbers
+
+ );
+
+ return err;
+
+}
+
+int test_r6_forbidden()
+{
+ volatile int err = -1;
+ volatile int a4 = 0;
+ volatile int a2 = 0;
+ volatile int a1 = 0;
+
+ asm(
+ ".set push \n\t"
+ ".set noreorder \n\t"
+ "li %[err], 1 \n\t" // Test if FS is ignored when branch is taken
+ "li %[a4], 0 \n\t"
+ "beqzalc %[a4], L41 \n\t"
+ "li %[err], -85 \n\t"
+ "L42: \n\t"
+ "b Lfail2 \n\t"
+ "nop \n\t"
+ "L41: \n\t"
+ "blez %[err], Lfail2 \n\t"
+ "li %[err], 2 \n\t" // Test if FS is used when branch is not taken
+ "li %[a4], 1 \n\t"
+ "blezc %[a4], L43 \n\t"
+ "addiu %[a4], %[a4], 1 \n\t"
+ "li %[a2], 2 \n\t"
+ "beq %[a4], %[a2], L44 \n\t"
+ "nop \n\t"
+ "L43: \n\t"
+ "nop \n\t"
+ "b Lfail2 \n\t"
+ "nop \n\t"
+ "L44: \n\t"
+ "li %[err], 3 \n\t" // Test if FS causes an error when it contains a branch
+ "li %[a4], 3 \n\t"
+ "beqzalc %[a4], Lfail2 \n\t"
+ "nop \n\t" // Note: bc L45 here causes Segmentation Fault: Illegal instruction which is OK.
+ "b Lend2 \n\t"
+ "nop \n\t"
+ "L45: \n\t"
+ "nop \n\t"
+ "b Lfail2 \n\t"
+ "nop \n\t"
+ "Lend2: \n\t"
+ "li %[err], 0 \n\t"
+ "Lfail2: \n\t"
+ "nop \n\t"
+ ".set pop \n\t"
+
+ : [err] "+r" (err), [a4] "+r"(a4), [a2] "+r"(a2), [a1] "+r"(a1) // outputs
+ : // inputs
+ : "$31" // clobbers
+ );
+
+ return err;
+}
+
+int test_r6_64()
+{
+ volatile int err = 0;
+
+ asm(
+ ".set push \n\t"
+ ".set noreorder \n\t"
+ ".data \n\t"
+ "d0: .dword 0 \n\t"
+ "dval: .dword 0xaa55bb66cc77dd88 \n\t"
+ "d1: .dword 0xaaaabbbbccccdddd \n\t"
+ "d2: .dword 256 \n\t"
+ "dlo: .dword 0xaabbbbccccdddd00 \n\t"
+ "dhi: .dword 0xffffffffffffffaa \n\t"
+ "dhiu: .dword 0x00000000000000aa \n\t"
+ "d3: .dword 0xffaaaabbbbccccde \n\t"
+ "d4: .dword 0xffffffffffffffdd \n\t"
+ "d5: .dword 0x00000000000000dd \n\t"
+ "d6: .dword 0x00aaaabbbbccccdd \n\t"
+ "d7: .dword 0xeeeeffff00001111 \n\t"
+ "d8: .dword 0xbbccccddddeeeeff \n\t"
+ "d9: .dword 0x000000ddaaaabbbb \n\t"
+ "d10: .dword 0x5555dddd3333bbbb \n\t"
+ "d11: .dword 0x9999999999999999 \n\t"
+ "d12: .dword 56 \n\t"
+ "d13: .dword 8 \n\t"
+ "d14: .dword 57 \n\t"
+ "d15: .dword 0x000000ddaaaac98b \n\t"
+ "d16: .dword 0xffffffffdead00dd \n\t"
+ "d17: .dword 0xffffffffc0de0000 \n\t"
+ "d18: .dword 0x0000123400000000 \n\t"
+ "d19: .dword 0xffffabcddead00dd \n\t"
+ "d20: .dword 0xc0de000000000000 \n\t"
+ "d21: .dword 0x8000abcddead00dd \n\t"
+ "dmask:.dword 0xffffffffffff0000 \n\t"
+ "dval1: .word 0x1234abcd \n\t"
+ "dval2: .word 0xffee0000 \n\t"
+ "dval3: .dword 0xffffffffffffffff \n\t"
+ " .fill 240,1,0 \n\t"
+ "dval4: .dword 0x5555555555555555 \n\t"
+ " .fill 264,1,0 \n\t"
+ "dval5: .dword 0xaaaaaaaaaaaaaaaa \n\t"
+
+ // Register $11 stores instruction currently being tested and hence identifies error if it occurs
+ ".text \n\t"
+ "li $11, 1 \n\t" // Test DMUL
+ r6ck_2r(dmul, 6, 5, 30)
+ r6ck_2r(dmul, -7, 9, -63)
+ r6ck_2r(dmul, -1, 1, -1)
+ r6ck_2dr(dmul, d1, d2, dlo)
+
+ "li $11, 2 \n\t" // Test DMUH
+ r6ck_2r(dmuh, 6, 5, 0)
+ r6ck_2r(dmuh, -7, 9, 0xffffffffffffffff)
+ r6ck_2r(dmuh, -1, 1, -1)
+ r6ck_2dr(dmuh, d1, d2, dhi)
+
+ "li $11, 3 \n\t" // Test DMULU
+ r6ck_2r(dmulu, 12, 10, 120)
+ r6ck_2r(dmulu, -1, 1, -1)
+ r6ck_2dr(dmulu, d1, d2, dlo)
+
+ "li $11, 4 \n\t" // Test DMUHU
+ r6ck_2r(dmuhu, 12, 10, 0)
+ r6ck_2r(dmuhu, -1, 1, 0)
+ r6ck_2dr(dmuhu, d1, d2, dhiu)
+
+ "li $11, 5 \n\t" // Test DDIV
+ r6ck_2r(ddiv, 10001, 10, 1000)
+ r6ck_2r(ddiv, -123456, 560, -220)
+ r6ck_2dr(ddiv, d1, d2, d3)
+
+ "li $11, 6 \n\t" // Test DMOD
+ r6ck_2r(dmod, 10001, 10, 1)
+ r6ck_2r(dmod, -123456, 560, 0xffffffffffffff00)
+ r6ck_2dr(dmod, d1, d2, d4)
+
+ "li $11, 7 \n\t" // Test DDIVU
+ r6ck_2r(ddivu, 9, 100, 0)
+ r6ck_2dr(ddivu, d1, d2, d6)
+
+ "li $11, 8 \n\t" // Test DMODU
+ r6ck_2r(dmodu, 9, 100, 9)
+ r6ck_2dr(dmodu, d1, d2, d5)
+
+ "li $11, 9 \n\t" // Test DALIGN
+ r6ck_2dr1i(dalign, d7, d1, 3, d8)
+ r6ck_2dr1i(dalign, d1, d5, 4, d9)
+
+ "li $11, 10 \n\t" // Test DBITSWAP
+ r6ck_1dr(dbitswap, d1, d10)
+ r6ck_1dr(dbitswap, d11, d11)
+
+ "li $11, 11 \n\t" // Test DCLZ
+ r6ck_1dr(dclz, d5, d12)
+ r6ck_1dr(dclz, d6, d13)
+
+ "li $11, 12 \n\t" // Test DCLO
+ r6ck_1dr(dclo, d5, d0)
+ r6ck_1dr(dclo, dhi, d14)
+
+ "li $11, 13 \n\t" // Test DLSA
+ r6ck_2r1i(dlsa, 0x82, 0x2000068, 4, 0x2000888)
+ r6ck_2dr1i(dlsa, d5, d9, 4, d15)
+
+ "li $11, 14 \n\t" // Test DAUI
+ r6ck_1dr1i(daui, d5, 0xdead, d16)
+ r6ck_1dr1i(daui, d0, 0xc0de, d17)
+
+ "li $11, 15 \n\t" // Test DAHI
+ r6ck_0dr1i(dahi, d0, 0x1234, d18)
+ r6ck_0dr1i(dahi, d16, 0xabce, d19)
+
+ "li $11, 16 \n\t" // Test DATI
+ r6ck_0dr1i(dati, d0, 0xc0de, d20)
+ r6ck_0dr1i(dati, d19, 0x8001, d21)
+
+ "li $11, 17 \n\t" // Test LDPC
+ "ld $5, dval \n\t"
+ "nop \n\t"
+ "ldpc $4, dval \n\t"
+ fp_assert($4, $5)
+
+ "li $11, 18 \n\t" // Test LWUPC
+ "lwu $5, dval1 \n\t"
+ "lwupc $4, dval1 \n\t"
+ fp_assert($4, $5)
+ "lwu $5, dval2 \n\t"
+ "lwupc $4, dval2 \n\t"
+ fp_assert($4, $5)
+
+ "li $11, 19 \n\t" // Test LLD
+ "ld $5, dval3 \n\t"
+ "dla $3, dval4 \n\t"
+ "lld $4, -248($3) \n\t"
+ fp_assert($4, $5)
+
+ "li $11, 20 \n\t" // Test SCD
+ "lld $4, -248($3) \n\t"
+ "dli $4, 0xafaf \n\t"
+ "scd $4, -248($3) \n\t"
+ "ld $5, dval3 \n\t"
+ "dli $4, 0xafaf \n\t"
+ fp_assert($4, $5)
+
+ "Lend3: \n\t"
+ "li $11, 0 \n\t"
+ "58: \n\t"
+ "move %[err], $11 \n\t"
+ ".set pop \n\t"
+ : [err] "+r" (err) // outputs
+ : // inputs
+ : "$3", "$4", "$5", "$6", "$7", "$8", "$9", "$10", "$11" // clobbers
+ );
+
+ return err;
+}
+
+int test_r6()
+{
+ volatile int err = 0;
+
+ asm(
+ ".set push \n\t"
+ ".set noreorder \n\t"
+ ".data \n\t"
+ "dval_1: .word 0xabcd1234 \n\t"
+ "dval_2: .word 0x1234eeff \n\t"
+ ".fill 248,1,0 \n\t"
+ "dval_3: .word 0x55555555 \n\t"
+ ".fill 260,1,0 \n\t"
+ "dval_4: .word 0xaaaaaaaa \n\t"
+ ".text \n\t"
+ "li $11, 1 \n\t" // Test MUL
+ r6ck_2r(mul, 7, 9, 63)
+ r6ck_2r(mul, -7, -9, 63)
+ r6ck_2r(mul, 61, -11, -671)
+ r6ck_2r(mul, 1001, 1234, 1235234)
+ r6ck_2r(mul, 123456789, 999999, 0x7eb1e22b)
+ r6ck_2r(mul, 0xaaaabbbb, 0xccccdddd, 0x56787f6f)
+ "li $11, 2 \n\t" // Test MUH
+ r6ck_2r(muh, 61, -11, 0xffffffff)
+ r6ck_2r(muh, 1001, 1234, 0)
+ r6ck_2r(muh, 123456789, 999999, 0x7048)
+ r6ck_2r(muh, 0xaaaabbbb, 0xccccdddd, 0x111107f7)
+ "li $11, 3 \n\t" // Test MULU
+ r6ck_2r(mulu, 7, 9, 63)
+ r6ck_2r(mulu, -7, -9, 63)
+ r6ck_2r(mulu, 61, -11, -671)
+ r6ck_2r(mulu, 1001, 1234, 1235234)
+ r6ck_2r(mulu, 123456789, 999999, 0x7eb1e22b)
+ r6ck_2r(mulu, 0xaaaabbbb, 0xccccdddd, 0x56787f6f)
+ "li $11, 4 \n\t" // Test MUHU
+ r6ck_2r(muhu, 1001, 1234, 0)
+ r6ck_2r(muhu, 123456789, 999999, 0x7048)
+ r6ck_2r(muhu, 0xaaaabbbb, 0xccccdddd, 0x8888a18f)
+ r6ck_2r(muhu, 0xaaaabbbb, 0xccccdddd, 0x8888a18f)
+ "li $11, 5 \n\t" // Test DIV
+ r6ck_2r(div, 10001, 10, 1000)
+ r6ck_2r(div, -123456, 560, -220)
+ r6ck_2r(div, 9, 100, 0)
+ "li $11, 6 \n\t" // Test MOD
+ r6ck_2r(mod, 10001, 10, 1)
+ r6ck_2r(mod, -123456, 560, 0xffffff00)
+ r6ck_2r(mod, 9, 100, 9)
+ "li $11, 7 \n\t" // Test DIVU
+ r6ck_2r(divu, 10001, 10, 1000)
+ r6ck_2r(divu, -123456, 560, 0x750674)
+ r6ck_2r(divu, 9, 100, 0)
+ r6ck_2r(divu, 0xaaaabbbb, 3, 0x38e393e9)
+ "li $11, 8 \n\t" // Test MODU
+ r6ck_2r(modu, 10001, 10, 1)
+ r6ck_2r(modu, -123456, 560, 0)
+ r6ck_2r(modu, 9, 100, 9)
+ r6ck_2r(modu, 0xaaaabbbb, 5, 4)
+ "li $11, 9 \n\t" // Test LSA
+ r6ck_2r1i(lsa, 1, 2, 2, 6)
+ r6ck_2r1i(lsa, 0x8000, 0xa000, 1, 0x1a000)
+ r6ck_2r1i(lsa, 0x82, 0x2000068, 4, 0x2000888)
+ "li $11, 10 \n\t" // Test AUI
+ r6ck_1r1i(aui, 0x0000c0de, 0xdead, 0xdeadc0de)
+ r6ck_1r1i(aui, 0x00005678, 0x1234, 0x12345678)
+ r6ck_1r1i(aui, 0x0000eeff, 0xabab, 0xababeeff)
+ "li $11, 11 \n\t" // Test SELEQZ
+ r6ck_2r(seleqz, 0x1234, 0, 0x1234)
+ r6ck_2r(seleqz, 0x1234, 4, 0)
+ r6ck_2r(seleqz, 0x80010001, 0, 0x80010001)
+ "li $11, 12 \n\t" // Test SELNEZ
+ r6ck_2r(selnez, 0x1234, 0, 0)
+ r6ck_2r(selnez, 0x1234, 1, 0x1234)
+ r6ck_2r(selnez, 0x80010001, 0xffffffff, 0x80010001)
+ "li $11, 13 \n\t" // Test ALIGN
+ r6ck_2r1i(align, 0xaabbccdd, 0xeeff0011, 1, 0xff0011aa)
+ r6ck_2r1i(align, 0xaabbccdd, 0xeeff0011, 3, 0x11aabbcc)
+ "li $11, 14 \n\t" // Test BITSWAP
+ r6ck_1r(bitswap, 0xaabbccdd, 0x55dd33bb)
+ r6ck_1r(bitswap, 0x11884422, 0x88112244)
+ "li $11, 15 \n\t" // Test CLZ
+ r6ck_1r(clz, 0x00012340, 15)
+ r6ck_1r(clz, 0x80012340, 0)
+ r6ck_1r(clz, 0x40012340, 1)
+ "li $11, 16 \n\t" // Test CLO
+ r6ck_1r(clo, 0x00123050, 0)
+ r6ck_1r(clo, 0xff123050, 8)
+ r6ck_1r(clo, 0x8f123050, 1)
+ "li $11, 17 \n\t" // Test ADDIUPC
+ //fp_assert($4, $11) // ==== VERIFY: all good till this line. GetPC_2 call may cause issues =======
+ "jal GetPC_2 \n\t"
+ "nop \n\t"
+ "addiu $4, $6, 8 \n\t"
+ "addiupc $5, 4 \n\t"
+ fp_assert($4, $5)
+ "li $11, 18 \n\t" // Test AUIPC
+ "jal GetPC_2 \n\t"
+ "nop \n\t"
+ "addiu $4, $6, 8 \n\t"
+ "aui $4, $4, 8 \n\t"
+ "auipc $5, 8 \n\t"
+ fp_assert($4, $5)
+ "li $11, 19 \n\t" // Test ALUIPC
+ "jal GetPC_2 \n\t"
+ "nop \n\t"
+ "addiu $4, $6, 16 \n\t"
+ "aui $4, $4, 8 \n\t"
+ "li $7, 0xffff0000 \n\t"
+ "and $4, $4, $7 \n\t"
+ "aluipc $5, 8 \n\t"
+ fp_assert($4, $5)
+ "li $11, 20 \n\t" // Test LWPC
+ "lw $5, dval_1 \n\t"
+ "lwpc $4, dval_1 \n\t"
+ fp_assert($4, $5)
+ "lw $5, dval_2 \n\t"
+ "lwpc $4, dval_2 \n\t"
+ fp_assert($4, $5)
+ "li $11, 21 \n\t" // Test LL !! NOTE: May be redundant LL because SC already contains LL in its test
+ "lw $5, dval_2 \n\t"
+ "dla $3, dval_3 \n\t" // ammendment: 'la' -> 'dla' to load 64-bit address
+ "ll $4, -252($3) \n\t"
+ fp_assert($4, $5)
+ "li $11, 22 \n\t" // Test SC
+ "ll $4, -252($3) \n\t"
+ "li $4, 0xafaf \n\t"
+ "sc $4, -252($3) \n\t"
+ "lw $5, dval_2 \n\t"
+ "li $4, 0xafaf \n\t"
+ fp_assert($4, $5)
+ "b Lend4 \n\t"
+ "nop \n\t"
+ "GetPC_2: \n\t"
+ "move $6, $31 \n\t"
+ "jr $31 \n\t"
+ "Lend4: \n\t"
+ "li $11, 0 \n\t"
+ "58: \n\t"
+ "move %[err], $11 \n\t"
+ ".set pop \n\t"
+ : [err] "+r"(err) // outputs
+ : // inputs
+ : "$3", "$4", "$5", "$6", "$7", "$8", "$9", "$10", "$11", "$31" // clobbers
+ );
+
+ return err;
+}
+
+
+// **bc1eq/eqz are enough
+
+int test_r6_fpu()
+{
+ volatile int err = 0;
+
+ asm(
+ ".set push \n\t"
+ ".set noreorder \n\t"
+ "li $11, 1 \n\t" // Test qNaN format is 754-2008"
+ "li $4, 0x0 \n\t"
+ "li $5, 0x0 \n\t"
+ "li $6, 0x7fc00000 \n\t"
+ "mtc1 $4, $f2 \n\t"
+ "mtc1 $5, $f4 \n\t"
+ "div.s $f6, $f2, $f4 \n\t"
+ "mfc1 $8, $f6 \n\t"
+ fp_assert($6, $8)
+ "li $11, 2 \n\t" // Test maddf.s
+ r6ck_3s(maddf.s, 0x0, 0x0, 0x0, 0x0)
+ r6ck_3s(maddf.s, 0x3f800000, 0x3f800000, 0x3f800000, 0x40000000)
+ r6ck_3s(maddf.s, 0xc0b1f5c3, 0x40490fd0, 0x402df854, 0x403e9f5d)
+
+ "li $11, 3 \n\t" // Test maddf.d
+ r6ck_3d(maddf.d, 0x0, 0x0, 0x0, 0x0)
+ r6ck_3d(maddf.d, 0x3ff0000000000000, 0x3ff0000000000000, 0x3ff0000000000000, 0x4000000000000000)
+ r6ck_3d(maddf.d, 0xc0163eb851eb851f, 0x400921f9f01b866e, 0x4005bf0a8b24919b, 0x4007d3ebc14f6cee)
+
+ "li $11, 4 \n\t" // Test msubf.s
+ r6ck_3s(msubf.s, 0x0, 0x0, 0x0, 0x0)
+ r6ck_3s(msubf.s, 0x3f800000, 0x3f800000, 0x3f800000, 0x0)
+ r6ck_3s(msubf.s, 0xc0b1f5c3, 0x40490fd0, 0x402df854, 0xc1619d9a)
+
+ "li $11, 5 \n\t" // Test msubf.d
+ r6ck_3d(msubf.d, 0x0, 0x0, 0x0, 0x0)
+ r6ck_3d(msubf.d, 0x3ff0000000000000, 0x3ff0000000000000, 0x3ff0000000000000, 0x0)
+ r6ck_3d(msubf.d, 0xc0163eb851eb851f, 0x400921f9f01b866e, 0x4005bf0a8b24919b, 0xc02c33b3423f605b)
+
+ "li $11, 6 \n\t" // Test cmp.af.s
+ r6ck_3s(cmp.af.s, 0x0, 0x3f800000, 0x3f800000, 0x0)
+ r6ck_3s(cmp.af.s, 0x0, 0x00000000, 0x3f800000, 0x0)
+
+ "li $11, 7 \n\t" // Test cmp.af.d
+ r6ck_3d(cmp.af.d, 0x0, 0x3ff0000000000000, 0x3ff0000000000000, 0x0)
+ r6ck_3d(cmp.af.d, 0x0, 0x0000000000000000, 0x3ff0000000000000, 0x0)
+
+ "li $11, 8 \n\t" // Test cmp.eq.s
+ r6ck_3s(cmp.eq.s, 0x0, 0x3f800000, 0x3f800000, 0xffffffff)
+ r6ck_3s(cmp.eq.s, 0x0, 0x00000000, 0x3f800000, 0x0)
+ r6ck_3s(cmp.eq.s, 0x0, 0x80000000, 0x00000000, 0xffffffff)
+ r6ck_3s(cmp.eq.s, 0x0, 0x7fc00000, 0x7fc00000, 0x0)
+ r6ck_3s(cmp.eq.s, 0x0, 0x7fc00000, 0xffc00000, 0x0)
+ r6ck_3s(cmp.eq.s, 0x0, 0x7fa00000, 0x7fa00000, 0x0)
+ r6ck_3s(cmp.eq.s, 0x0, 0x7fa00000, 0x7fc00000, 0x0)
+ r6ck_3s(cmp.eq.s, 0x0, 0x7f800000, 0x7f800000, 0xffffffff)
+ r6ck_3s(cmp.eq.s, 0x0, 0xff800000, 0xff800000, 0xffffffff)
+
+ "li $11, 9 \n\t" // Test cmp.eq.d
+ r6ck_3d(cmp.eq.d, 0x0, 0x3ff0000000000000, 0x3ff0000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.eq.d, 0x0, 0x0000000000000000, 0x3ff0000000000000, 0x0)
+ r6ck_3d(cmp.eq.d, 0x0, 0x8000000000000000, 0x0000000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.eq.d, 0x0, 0x7ff8000000000000, 0x7ff8000000000000, 0x0)
+ r6ck_3d(cmp.eq.d, 0x0, 0x7ff8000000000000, 0xffc0000000000000, 0x0)
+ r6ck_3d(cmp.eq.d, 0x0, 0x7fa0000000000000, 0x7fa0000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.eq.d, 0x0, 0x7fa0000000000000, 0x7ff8000000000000, 0x0)
+ r6ck_3d(cmp.eq.d, 0x0, 0x7ff0000000000000, 0x7ff0000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.eq.d, 0x0, 0xfff0000000000000, 0xfff0000000000000, 0xffffffffffffffff)
+
+ "li $11, 10 \n\t" // Test cmp.ne.s
+ r6ck_3s(cmp.ne.s, 0x0, 0x3f800000, 0x3f800000, 0x0)
+ r6ck_3s(cmp.ne.s, 0x0, 0x00000000, 0x3f800000, 0xffffffff)
+ r6ck_3s(cmp.ne.s, 0x0, 0x80000000, 0x00000000, 0x0)
+ r6ck_3s(cmp.ne.s, 0x0, 0x7fc00000, 0x7fc00000, 0x0)
+ r6ck_3s(cmp.ne.s, 0x0, 0x7fc00000, 0xffc00000, 0x0)
+ r6ck_3s(cmp.ne.s, 0x0, 0x7fa00000, 0x7fa00000, 0x0)
+ r6ck_3s(cmp.ne.s, 0x0, 0x7fa00000, 0x7fc00000, 0x0)
+ r6ck_3s(cmp.ne.s, 0x0, 0x7f800000, 0x7f800000, 0x0)
+ r6ck_3s(cmp.ne.s, 0x0, 0xff800000, 0xff800000, 0x0)
+
+ "li $11, 11 \n\t" // Test cmp.ne.d
+ r6ck_3d(cmp.ne.d, 0x0, 0x3ff0000000000000, 0x3ff0000000000000, 0x0)
+ r6ck_3d(cmp.ne.d, 0x0, 0x0000000000000000, 0x3ff0000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.ne.d, 0x0, 0x8000000000000000, 0x0000000000000000, 0x0)
+ r6ck_3d(cmp.ne.d, 0x0, 0x7ff8000000000000, 0x7ff8000000000000, 0x0)
+ r6ck_3d(cmp.ne.d, 0x0, 0x7ff8000000000000, 0xffc0000000000000, 0x0)
+ r6ck_3d(cmp.ne.d, 0x0, 0x7fa0000000000000, 0x7fa0000000000000, 0x0)
+ r6ck_3d(cmp.ne.d, 0x0, 0x7fa0000000000000, 0x7ff8000000000000, 0x0)
+ r6ck_3d(cmp.ne.d, 0x0, 0x7ff0000000000000, 0x7ff0000000000000, 0x0)
+ r6ck_3d(cmp.ne.d, 0x0, 0xfff0000000000000, 0xfff0000000000000, 0x0)
+ r6ck_3d(cmp.ne.d, 0x0, 0xab19546120965720, 0x92452014f194abc3, 0xffffffffffffffff)
+
+ "li $11, 12 \n\t" // Test cmp.lt.s
+ r6ck_3s(cmp.lt.s, 0x0, 0x3f800000, 0x3f800000, 0x0)
+ r6ck_3s(cmp.lt.s, 0x0, 0x00000000, 0x3f800000, 0xffffffff)
+ r6ck_3s(cmp.lt.s, 0x0, 0xbf800000, 0x3f800000, 0xffffffff)
+ r6ck_3s(cmp.lt.s, 0x0, 0x3f800000, 0xbf800000, 0x0)
+ r6ck_3s(cmp.lt.s, 0x0, 0xff800000, 0xbf800000, 0xffffffff)
+ r6ck_3s(cmp.lt.s, 0x0, 0xbf800000, 0x7f800000, 0xffffffff)
+ r6ck_3s(cmp.lt.s, 0x0, 0xbf800000, 0xff800000, 0x0)
+ r6ck_3s(cmp.lt.s, 0x0, 0x7f800000, 0xbf800000, 0x0)
+
+ "li $11, 13 \n\t" // Test cmp.lt.d
+ r6ck_3d(cmp.lt.d, 0x0, 0x3ff0000000000000, 0x3ff0000000000000, 0x0)
+ r6ck_3d(cmp.lt.d, 0x0, 0x0000000000000000, 0x3ff0000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.lt.d, 0x0, 0xbff0000000000000, 0x3ff0000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.lt.d, 0x0, 0x3ff0000000000000, 0xbff0000000000000, 0x0)
+ r6ck_3d(cmp.lt.d, 0x0, 0xfff0000000000000, 0xbff0000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.lt.d, 0x0, 0xbff0000000000000, 0x7ff0000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.lt.d, 0x0, 0xbff0000000000000, 0xfff0000000000000, 0x0)
+ r6ck_3d(cmp.lt.d, 0x0, 0x7ff0000000000000, 0xbff0000000000000, 0x0)
+
+ "li $11, 14 \n\t" // Test cmp.le.s
+ r6ck_3s(cmp.le.s, 0x0, 0x3f800000, 0x3f800000, 0xffffffff)
+ r6ck_3s(cmp.le.s, 0x0, 0x00000000, 0x3f800000, 0xffffffff)
+ r6ck_3s(cmp.le.s, 0x0, 0xbf800000, 0x3f800000, 0xffffffff)
+ r6ck_3s(cmp.le.s, 0x0, 0x3f800000, 0xbf800000, 0x0)
+ r6ck_3s(cmp.le.s, 0x0, 0xff800000, 0xbf800000, 0xffffffff)
+ r6ck_3s(cmp.le.s, 0x0, 0xbf800000, 0x7f800000, 0xffffffff)
+ r6ck_3s(cmp.le.s, 0x0, 0xbf800000, 0xff800000, 0x0)
+ r6ck_3s(cmp.le.s, 0x0, 0x7f800000, 0xbf800000, 0x0)
+
+ "li $11, 15 \n\t" // Test cmp.le.d
+ r6ck_3d(cmp.le.d, 0x0, 0x3ff0000000000000, 0x3ff0000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.le.d, 0x0, 0x0000000000000000, 0x3ff0000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.le.d, 0x0, 0xbff0000000000000, 0x3ff0000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.le.d, 0x0, 0x3ff0000000000000, 0xbff0000000000000, 0x0)
+ r6ck_3d(cmp.le.d, 0x0, 0xfff0000000000000, 0xbff0000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.le.d, 0x0, 0xbff0000000000000, 0x7ff0000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.le.d, 0x0, 0xbff0000000000000, 0xfff0000000000000, 0x0)
+ r6ck_3d(cmp.le.d, 0x0, 0x7ff0000000000000, 0xbff0000000000000, 0x0)
+
+ "li $11, 16 \n\t" // Test cmp.un.s
+ r6ck_3s(cmp.un.s, 0x0, 0x3f800000, 0x3f800000, 0x0)
+ r6ck_3s(cmp.un.s, 0x0, 0x3f800000, 0xbf800000, 0x0)
+ r6ck_3s(cmp.un.s, 0x0, 0x3f800000, 0x7fc00000, 0xffffffff)
+ r6ck_3s(cmp.un.s, 0x0, 0x7fc01234, 0x7fc00000, 0xffffffff)
+ r6ck_3s(cmp.un.s, 0x0, 0x7fc00000, 0x7fc00000, 0xffffffff)
+ r6ck_3s(cmp.un.s, 0x0, 0x3f800000, 0xff800000, 0x0)
+ r6ck_3s(cmp.un.s, 0x0, 0x3f800000, 0x7f800000, 0x0)
+
+ "li $11, 17 \n\t" // Test cmp.un.d
+ r6ck_3d(cmp.un.d, 0x0, 0x3ff0000000000000, 0x3ff0000000000000, 0x0)
+ r6ck_3d(cmp.un.d, 0x0, 0x3ff0000000000000, 0xbff0000000000000, 0x0)
+ r6ck_3d(cmp.un.d, 0x0, 0x3ff0000000000000, 0x7ff8000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.un.d, 0x0, 0x7fc0123400000000, 0x7ff8000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.un.d, 0x0, 0x7ff8000000000000, 0x7ff8000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.un.d, 0x0, 0x3ff0000000000000, 0xfff0000000000000, 0x0)
+ r6ck_3d(cmp.un.d, 0x0, 0x3ff0000000000000, 0x7ff0000000000000, 0x0)
+
+ "li $11, 18 \n\t" // Test cmp.or.s
+ r6ck_3s(cmp.or.s, 0x0, 0x3f800000, 0x3f800000, 0xffffffff)
+ r6ck_3s(cmp.or.s, 0x0, 0xbf800000, 0x3f800000, 0xffffffff)
+ r6ck_3s(cmp.or.s, 0x0, 0x3f800000, 0x7fc00000, 0x0)
+ r6ck_3s(cmp.or.s, 0x0, 0x7fc00000, 0x3f800000, 0x0)
+ r6ck_3s(cmp.or.s, 0x0, 0xffc00000, 0x3f800000, 0x0)
+ r6ck_3s(cmp.or.s, 0x0, 0x7fc01234, 0x7fc00000, 0x0)
+ r6ck_3s(cmp.or.s, 0x0, 0xff800000, 0x00000000, 0xffffffff)
+ r6ck_3s(cmp.or.s, 0x0, 0x00000000, 0x7f800000, 0xffffffff)
+ r6ck_3s(cmp.or.s, 0x0, 0x00000000, 0xff800000, 0xffffffff)
+ r6ck_3s(cmp.or.s, 0x0, 0x7f800000, 0x00000000, 0xffffffff)
+ r6ck_3s(cmp.or.s, 0x0, 0x7f800000, 0x00000000, 0xffffffff)
+
+ "li $11, 19 \n\t" // Test cmp.or.d
+ r6ck_3d(cmp.or.d, 0x0, 0x3ff0000000000000, 0x3ff0000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.or.d, 0x0, 0xbff0000000000000, 0x3ff0000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.or.d, 0x0, 0x3ff0000000000000, 0x7ff8000000000000, 0x0)
+ r6ck_3d(cmp.or.d, 0x0, 0x7ff8000000000000, 0x3ff0000000000000, 0x0)
+ r6ck_3d(cmp.or.d, 0x0, 0xfff8000000000000, 0x3ff0000000000000, 0x0)
+ r6ck_3d(cmp.or.d, 0x0, 0x7ff8123492134352, 0x7ff8000000000000, 0x0)
+ r6ck_3d(cmp.or.d, 0x0, 0xfff0000000000000, 0x0000000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.or.d, 0x0, 0x0000000000000000, 0x7ff0000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.or.d, 0x0, 0x0000000000000000, 0xfff0000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.or.d, 0x0, 0x7ff0000000000000, 0x0000000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.or.d, 0x0, 0x7ff0000000000000, 0x0000000000000000, 0xffffffffffffffff)
+
+ "li $11, 20 \n\t" // Test cmp.ueq.s
+ r6ck_3s(cmp.ueq.s, 0x0, 0x3f800000, 0x00000000, 0x0)
+ r6ck_3s(cmp.ueq.s, 0x0, 0x3f800000, 0x7fc00000, 0xffffffff)
+ r6ck_3s(cmp.ueq.s, 0x0, 0x7fc00000, 0x7fc00000, 0xffffffff)
+ r6ck_3s(cmp.ueq.s, 0x0, 0x3f800000, 0x3f800000, 0xffffffff)
+ r6ck_3s(cmp.ueq.s, 0x0, 0x00000000, 0x3f800000, 0x0)
+ r6ck_3s(cmp.ueq.s, 0x0, 0x80000000, 0x00000000, 0xffffffff)
+ r6ck_3s(cmp.ueq.s, 0x0, 0x7f800000, 0x7fc00000, 0xffffffff)
+ r6ck_3s(cmp.ueq.s, 0x0, 0xff800000, 0xff800000, 0xffffffff)
+
+ "li $11, 21 \n\t" // Test cmp.ueq.d
+ r6ck_3d(cmp.ueq.d, 0x0, 0x3ff0000000000000, 0x0000000000000000, 0x0)
+ r6ck_3d(cmp.ueq.d, 0x0, 0x3ff0000000000000, 0x7ff8000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.ueq.d, 0x0, 0x7ff8000000000000, 0x7ff8000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.ueq.d, 0x0, 0x3ff0000000000000, 0x3ff0000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.ueq.d, 0x0, 0x0000000000000000, 0x3ff0000000000000, 0x0)
+ r6ck_3d(cmp.ueq.d, 0x0, 0x8000000000000000, 0x0000000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.ueq.d, 0x0, 0x7ff0000000000000, 0x7ff8000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.ueq.d, 0x0, 0xfff0000000000000, 0xfff0000000000000, 0xffffffffffffffff)
+
+ "li $11, 22 \n\t" // Test cmp.une.s
+ r6ck_3s(cmp.une.s, 0x0, 0x3f800000, 0x3f800000, 0x0)
+ r6ck_3s(cmp.une.s, 0x0, 0x3f800000, 0x7fc00000, 0xffffffff)
+ r6ck_3s(cmp.une.s, 0x0, 0x7fc00000, 0x7fc00000, 0xffffffff)
+ r6ck_3s(cmp.une.s, 0x0, 0x3f800000, 0x3f800000, 0x0)
+ r6ck_3s(cmp.une.s, 0x0, 0x00000000, 0x3f800000, 0xffffffff)
+ r6ck_3s(cmp.une.s, 0x0, 0x80000000, 0x00000000, 0x0)
+ r6ck_3s(cmp.une.s, 0x0, 0x7f800000, 0x7fc00000, 0xffffffff)
+ r6ck_3s(cmp.une.s, 0x0, 0xff800000, 0xff800000, 0x0)
+
+ "li $11, 23 \n\t" // Test cmp.une.d
+ r6ck_3d(cmp.une.d, 0x0, 0x3ff0000000000000, 0x3ff0000000000000, 0x0)
+ r6ck_3d(cmp.une.d, 0x0, 0x3ff0000000000000, 0x7ff8000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.une.d, 0x0, 0x7ff8000000000000, 0x7ff8000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.une.d, 0x0, 0x3ff0000000000000, 0x3ff0000000000000, 0x0)
+ r6ck_3d(cmp.une.d, 0x0, 0x0000000000000000, 0x3ff0000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.une.d, 0x0, 0x8000000000000000, 0x0000000000000000, 0x0)
+ r6ck_3d(cmp.une.d, 0x0, 0x7ff0000000000000, 0x7ff8000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.une.d, 0x0, 0xfff0000000000000, 0xfff0000000000000, 0x0)
+
+ "li $11, 24 \n\t" // Test cmp.ult.s
+ r6ck_3s(cmp.ult.s, 0x0, 0x3f800000, 0x3f800000, 0x0)
+ r6ck_3s(cmp.ult.s, 0x0, 0x3f800000, 0x7fc00000, 0xffffffff)
+ r6ck_3s(cmp.ult.s, 0x0, 0x7fc00000, 0x7fc00000, 0xffffffff)
+ r6ck_3s(cmp.ult.s, 0x0, 0x00000000, 0x3f800000, 0xffffffff)
+ r6ck_3s(cmp.ult.s, 0x0, 0xbf800000, 0x3f800000, 0xffffffff)
+ r6ck_3s(cmp.ult.s, 0x0, 0x3f800000, 0xbf800000, 0x0)
+
+ "li $11, 25 \n\t" // Test cmp.ult.d
+ r6ck_3d(cmp.ult.d, 0x0, 0x3ff0000000000000, 0x3ff0000000000000, 0x0)
+ r6ck_3d(cmp.ult.d, 0x0, 0x3ff0000000000000, 0x7ff8000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.ult.d, 0x0, 0x7ff8000000000000, 0x7ff8000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.ult.d, 0x0, 0x0000000000000000, 0x3ff0000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.ult.d, 0x0, 0xbff0000000000000, 0x3ff0000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.ult.d, 0x0, 0x3ff0000000000000, 0xbff0000000000000, 0x0)
+
+ "li $11, 26 \n\t" // Test cmp.ule.s
+ r6ck_3s(cmp.ule.s, 0x0, 0x3f800000, 0x7fc00000, 0xffffffff)
+ r6ck_3s(cmp.ule.s, 0x0, 0x7fc00000, 0x7fc00000, 0xffffffff)
+ r6ck_3s(cmp.ule.s, 0x0, 0x3f800000, 0x3f800000, 0xffffffff)
+ r6ck_3s(cmp.ule.s, 0x0, 0x00000000, 0x3f800000, 0xffffffff)
+ r6ck_3s(cmp.ule.s, 0x0, 0xbf800000, 0x3f800000, 0xffffffff)
+ r6ck_3s(cmp.ule.s, 0x0, 0x3f800000, 0xbf800000, 0x0)
+ r6ck_3s(cmp.ule.s, 0x0, 0x3f800000, 0xff800000, 0x0)
+
+ "li $11, 27 \n\t" // Test cmp.ule.d
+ r6ck_3d(cmp.ule.d, 0x0, 0x3ff0000000000000, 0x7ff8000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.ule.d, 0x0, 0x7ff8000000000000, 0x7ff8000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.ule.d, 0x0, 0x3ff0000000000000, 0x3ff0000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.ule.d, 0x0, 0x0000000000000000, 0x3ff0000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.ule.d, 0x0, 0xbff0000000000000, 0x3ff0000000000000, 0xffffffffffffffff)
+ r6ck_3d(cmp.ule.d, 0x0, 0x3ff0000000000000, 0xbff0000000000000, 0x0)
+ r6ck_3d(cmp.ule.d, 0x0, 0x3ff0000000000000, 0xfff0000000000000, 0x0)
+
+ "li $11, 281 \n\t" // Test rint.s
+ r6ck_2s(rint.s, 0x0, 0x3fbf10cb, 0x3f800000)
+ "li $11, 282 \n\t" // Test rint.s
+ r6ck_2s(rint.s, 0x0, 0xb9011423, 0x0)
+ "li $11, 283 \n\t" // Test rint.s
+ r6ck_2s(rint.s, 0x0, 0x43fa4687, 0x43fa8000)
+ "li $11, 284 \n\t" // Test rint.s
+ r6ck_2s(rint.s, 0x0, 0x41380000, 0x41400000)
+ "li $11, 285 \n\t" // Test rint.s
+ r6ck_2s(rint.s, 0x0, 0x3ff33333, 0x40000000)
+
+ "li $11, 291 \n\t" // Test rint.d
+ r6ck_2d(rint.d, 0x0, 0x3ff1f9a6b50b0f28, 0x3ff0000000000000)
+ "li $11, 292 \n\t" // Test rint.d
+ r6ck_2d(rint.d, 0x0, 0xbf543bf727136a40, 0x0)
+ "li $11, 293 \n\t" // Test rint.d
+ r6ck_2d(rint.d, 0x0, 0x407f48d0e5604189, 0x407f500000000000)
+ "li $11, 294 \n\t" // Test rint.d
+ r6ck_2d(rint.d, 0x0, 0x5b7c2d43b93b0a8c, 0x5b7c2d43b93b0a8c)
+
+ "li $11, 30 \n\t" // Test class.s
+ r6ck_2s(class.s, 0x0, 0x7f800010, 0x1)
+ r6ck_2s(class.s, 0x0, 0x7fc00000, 0x2)
+ r6ck_2s(class.s, 0x0, 0xff800000, 0x4)
+ r6ck_2s(class.s, 0x0, 0xbf800000, 0x8)
+ r6ck_2s(class.s, 0x0, 0x80000001, 0x10)
+ r6ck_2s(class.s, 0x0, 0x80000000, 0x20)
+ r6ck_2s(class.s, 0x0, 0x7f800000, 0x40)
+ r6ck_2s(class.s, 0x0, 0x3f800000, 0x80)
+ r6ck_2s(class.s, 0x0, 0x00000001, 0x100)
+ r6ck_2s(class.s, 0x0, 0x00000000, 0x200)
+
+ "li $11, 31 \n\t" // Test class.d
+ r6ck_2d(class.d, 0x0, 0x7ff0000000000010, 0x1)
+ r6ck_2d(class.d, 0x0, 0x7ff8000000000000, 0x2)
+ r6ck_2d(class.d, 0x0, 0xfff0000000000000, 0x4)
+ r6ck_2d(class.d, 0x0, 0xbff0000000000000, 0x8)
+ r6ck_2d(class.d, 0x0, 0x8000000000000001, 0x10)
+ r6ck_2d(class.d, 0x0, 0x8000000000000000, 0x20)
+ r6ck_2d(class.d, 0x0, 0x7ff0000000000000, 0x40)
+ r6ck_2d(class.d, 0x0, 0x3ff0000000000000, 0x80)
+ r6ck_2d(class.d, 0x0, 0x0000000000000001, 0x100)
+ r6ck_2d(class.d, 0x0, 0x0000000000000000, 0x200)
+
+ "li $11, 32 \n\t" // Test min.s
+ r6ck_3s(min.s, 0x0, 0x3f800000, 0x0, 0x0)
+ r6ck_3s(min.s, 0x0, 0x0, 0x3f800000, 0x0)
+ r6ck_3s(min.s, 0x0, 0x7f800000, 0x3f800000, 0x3f800000)
+ r6ck_3s(min.s, 0x0, 0x3f800000, 0x7f800000, 0x3f800000)
+ r6ck_3s(min.s, 0x0, 0xff800000, 0xbf800000, 0xff800000)
+ r6ck_3s(min.s, 0x0, 0xbf800000, 0xff800000, 0xff800000)
+ r6ck_3s(min.s, 0x0, 0x7fffffff, 0x3f800000, 0x3f800000)
+ r6ck_3s(min.s, 0x0, 0x3f800000, 0x7fffffff, 0x3f800000)
+
+ "li $11, 33 \n\t" // Test min.d
+ r6ck_3d(min.d, 0x0, 0x3ff0000000000000, 0x0, 0x0)
+ r6ck_3d(min.d, 0x0, 0x0, 0x3ff0000000000000, 0x0)
+ r6ck_3d(min.d, 0x0, 0x7ff0000000000000, 0x3ff0000000000000, 0x3ff0000000000000)
+ r6ck_3d(min.d, 0x0, 0x3ff0000000000000, 0x7ff0000000000000, 0x3ff0000000000000)
+ r6ck_3d(min.d, 0x0, 0xfff0000000000000, 0xbff0000000000000, 0xfff0000000000000)
+ r6ck_3d(min.d, 0x0, 0xbff0000000000000, 0xfff0000000000000, 0xfff0000000000000)
+ r6ck_3d(min.d, 0x0, 0x7fffffffffffffff, 0x3ff0000000000000, 0x3ff0000000000000)
+ r6ck_3d(min.d, 0x0, 0x3ff0000000000000, 0x7fffffffffffffff, 0x3ff0000000000000)
+
+ "li $11, 34 \n\t" // Test max.s
+ r6ck_3s(max.s, 0x0, 0x3f800000, 0x0, 0x3f800000)
+ r6ck_3s(max.s, 0x0, 0x0, 0x3f800000, 0x3f800000)
+ r6ck_3s(max.s, 0x0, 0x7f800000, 0x3f800000, 0x7f800000)
+ r6ck_3s(max.s, 0x0, 0x3f800000, 0x7f800000, 0x7f800000)
+ r6ck_3s(max.s, 0x0, 0xff800000, 0xbf800000, 0xbf800000)
+ r6ck_3s(max.s, 0x0, 0xbf800000, 0xff800000, 0xbf800000)
+ r6ck_3s(max.s, 0x0, 0x7fffffff, 0x3f800000, 0x3f800000)
+ r6ck_3s(max.s, 0x0, 0x3f800000, 0x7fffffff, 0x3f800000)
+
+ "li $11, 35 \n\t" // Test max.d
+ r6ck_3d(max.d, 0x0, 0x3ff0000000000000, 0x0, 0x3ff0000000000000)
+ r6ck_3d(max.d, 0x0, 0x0, 0x3ff0000000000000, 0x3ff0000000000000)
+ r6ck_3d(max.d, 0x0, 0x7ff0000000000000, 0x3ff0000000000000, 0x7ff0000000000000)
+ r6ck_3d(max.d, 0x0, 0x3ff0000000000000, 0x7ff0000000000000, 0x7ff0000000000000)
+ r6ck_3d(max.d, 0x0, 0xfff0000000000000, 0xbff0000000000000, 0xbff0000000000000)
+ r6ck_3d(max.d, 0x0, 0xbff0000000000000, 0xfff0000000000000, 0xbff0000000000000)
+ r6ck_3d(max.d, 0x0, 0x7fffffffffffffff, 0x3ff0000000000000, 0x3ff0000000000000)
+ r6ck_3d(max.d, 0x0, 0x3ff0000000000000, 0x7fffffffffffffff, 0x3ff0000000000000)
+
+ "li $11, 36 \n\t" // Test mina.s
+ r6ck_3s(mina.s, 0x0, 0x3f800000, 0x0, 0x0)
+ r6ck_3s(mina.s, 0x0, 0x0, 0x3f800000, 0x0)
+ r6ck_3s(mina.s, 0x0, 0x7f800000, 0x3f800000, 0x3f800000)
+ r6ck_3s(mina.s, 0x0, 0x3f800000, 0x7f800000, 0x3f800000)
+ r6ck_3s(mina.s, 0x0, 0xff800000, 0xbf800000, 0xbf800000)
+ r6ck_3s(mina.s, 0x0, 0xbf800000, 0xff800000, 0xbf800000)
+ r6ck_3s(mina.s, 0x0, 0x7fffffff, 0x3f800000, 0x3f800000)
+ r6ck_3s(mina.s, 0x0, 0x3f800000, 0x7fffffff, 0x3f800000)
+ r6ck_3s(mina.s, 0x0, 0xc0000000, 0x3f800000, 0x3f800000)
+ r6ck_3s(mina.s, 0x0, 0x3f800000, 0xc0000000, 0x3f800000)
+
+ "li $11, 37 \n\t" // Test mina.d
+ r6ck_3d(mina.d, 0x0, 0x3ff0000000000000, 0x0, 0x0)
+ r6ck_3d(mina.d, 0x0, 0x0, 0x3ff0000000000000, 0x0)
+ r6ck_3d(mina.d, 0x0, 0x7ff0000000000000, 0x3ff0000000000000, 0x3ff0000000000000)
+ r6ck_3d(mina.d, 0x0, 0x3ff0000000000000, 0x7ff0000000000000, 0x3ff0000000000000)
+ r6ck_3d(mina.d, 0x0, 0xfff0000000000000, 0xbff0000000000000, 0xbff0000000000000)
+ r6ck_3d(mina.d, 0x0, 0xbff0000000000000, 0xfff0000000000000, 0xbff0000000000000)
+ r6ck_3d(mina.d, 0x0, 0x7fffffffffffffff, 0x3ff0000000000000, 0x3ff0000000000000)
+ r6ck_3d(mina.d, 0x0, 0x3ff0000000000000, 0x7fffffffffffffff, 0x3ff0000000000000)
+ r6ck_3d(mina.d, 0x0, 0xc000000000000000, 0x3ff0000000000000, 0x3ff0000000000000)
+ r6ck_3d(mina.d, 0x0, 0x3ff0000000000000, 0xc000000000000000, 0x3ff0000000000000)
+
+ "li $11, 38 \n\t" // Test maxa.s
+ r6ck_3s(maxa.s, 0x0, 0x3f800000, 0x0, 0x3f800000)
+ r6ck_3s(maxa.s, 0x0, 0x0, 0x3f800000, 0x3f800000)
+ r6ck_3s(maxa.s, 0x0, 0x7f800000, 0x3f800000, 0x7f800000)
+ r6ck_3s(maxa.s, 0x0, 0x3f800000, 0x7f800000, 0x7f800000)
+ r6ck_3s(maxa.s, 0x0, 0xff800000, 0xbf800000, 0xff800000)
+ r6ck_3s(maxa.s, 0x0, 0xbf800000, 0xff800000, 0xff800000)
+ r6ck_3s(maxa.s, 0x0, 0x7fffffff, 0x3f800000, 0x3f800000)
+ r6ck_3s(maxa.s, 0x0, 0x3f800000, 0x7fffffff, 0x3f800000)
+ r6ck_3s(maxa.s, 0x0, 0xc0000000, 0x3f800000, 0xc0000000)
+ r6ck_3s(maxa.s, 0x0, 0x3f800000, 0xc0000000, 0xc0000000)
+
+ "li $11, 39 \n\t" // Test maxa.d
+ r6ck_3d(maxa.d, 0x0, 0x3ff0000000000000, 0x0, 0x3ff0000000000000)
+ r6ck_3d(maxa.d, 0x0, 0x0, 0x3ff0000000000000, 0x3ff0000000000000)
+ r6ck_3d(maxa.d, 0x0, 0x7ff0000000000000, 0x3ff0000000000000, 0x7ff0000000000000)
+ r6ck_3d(maxa.d, 0x0, 0x3ff0000000000000, 0x7ff0000000000000, 0x7ff0000000000000)
+ r6ck_3d(maxa.d, 0x0, 0xfff0000000000000, 0xbff0000000000000, 0xfff0000000000000)
+ r6ck_3d(maxa.d, 0x0, 0xbff0000000000000, 0xfff0000000000000, 0xfff0000000000000)
+ r6ck_3d(maxa.d, 0x0, 0x7fffffffffffffff, 0x3ff0000000000000, 0x3ff0000000000000)
+ r6ck_3d(maxa.d, 0x0, 0x3ff0000000000000, 0x7fffffffffffffff, 0x3ff0000000000000)
+ r6ck_3d(maxa.d, 0x0, 0xc000000000000000, 0x3ff0000000000000, 0xc000000000000000)
+ r6ck_3d(maxa.d, 0x0, 0x3ff0000000000000, 0xc000000000000000, 0xc000000000000000)
+
+ "li $11, 40 \n\t" // Test sel.s
+ r6ck_3s(sel.s, 0x0, 0xabcdef12, 0x12345678, 0xabcdef12)
+ r6ck_3s(sel.s, 0x1, 0xdeadbeef, 0xcafe1234, 0xcafe1234)
+ r6ck_3s(sel.s, 0xfffffffe, 0xbadcafe0, 0x12345678, 0xbadcafe0)
+ r6ck_3s(sel.s, 0xffffffff, 0xdeadbeef, 0xcadf00ab, 0xcadf00ab)
+
+ "li $11, 41 \n\t" // Test sel.d
+ r6ck_3d(sel.d, 0x0, 0xabcdef123456789, 0x12345678abcdefa, 0xabcdef123456789)
+ r6ck_3d(sel.d, 0x1, 0xdeadbeef1534567, 0xcafe12340145279, 0xcafe12340145279)
+ r6ck_3d(sel.d, 0xfffffffffffffffe, 0xbadcafe00efacdab, 0x1234567887654321, 0xbadcafe00efacdab)
+ r6ck_3d(sel.d, 0xffffffffffffffff, 0xdeadbeeffeebdaed, 0xcadf00abba00fdac, 0xcadf00abba00fdac)
+
+ "li $11, 42 \n\t" // Test seleqz.s
+ r6ck_3s(seleqz.s, 0x0, 0x1234abcd, 0x0, 0x1234abcd)
+ r6ck_3s(seleqz.s, 0x0, 0xabcdef01, 0x1, 0x0)
+ r6ck_3s(seleqz.s, 0x0, 0xffeebbcc, 0xfffffffe, 0xffeebbcc)
+ r6ck_3s(seleqz.s, 0x0, 0x12345678, 0xffffffff, 0)
+
+ "li $11, 43 \n\t" // Test seleqz.d
+ r6ck_3d(seleqz.d, 0x0, 0x1234abcddcba4321, 0x0, 0x1234abcddcba4321)
+ r6ck_3d(seleqz.d, 0x0, 0xabcdef0110fedcba, 0x1, 0x0)
+ r6ck_3d(seleqz.d, 0x0, 0xffeebbccccbbeeff, 0xfffffffffffffffe, 0xffeebbccccbbeeff)
+ r6ck_3d(seleqz.d, 0x0, 0x1234567887654321, 0xffffffffffffffff, 0x0)
+
+ "li $11, 44 \n\t" // Test selnez.s
+ r6ck_3s(selnez.s, 0x0, 0x1234abcd, 0x0, 0x0)
+ r6ck_3s(selnez.s, 0x0, 0xabcdef01, 0x1, 0xabcdef01)
+ r6ck_3s(selnez.s, 0x0, 0xffeebbcc, 0xfffffffe, 0x0)
+ r6ck_3s(selnez.s, 0x0, 0x12345678, 0xffffffff, 0x12345678)
+
+ "li $11, 45 \n\t" // Test selnez.d
+ r6ck_3d(selnez.d, 0x0, 0x1234abcddcba4321, 0x0, 0x0)
+ r6ck_3d(selnez.d, 0x0, 0xabcdef0110fedcba, 0x1, 0xabcdef0110fedcba)
+ r6ck_3d(selnez.d, 0x0, 0xffeebbccccbbeeff, 0xfffffffffffffffe, 0x0)
+ r6ck_3d(selnez.d, 0x0, 0x1234567887654321, 0xffffffffffffffff, 0x1234567887654321)
+
+ "li $11, 46 \n\t" // Test bc1eqz"
+ "li $10, 0x01 \n\t"
+ "mtc1 $10, $f2 \n\t"
+ "mtc1 $0, $f4 \n\t"
+ "bc1eqz $f2, 58f \n\t"
+ "nop \n\t"
+ "bc1eqz $f4, L62 \n\t"
+ "nop \n\t"
+ "b 58f \n\t"
+ "nop \n\t"
+"L62: \n\t"
+ "li $11, 47 \n\t" // Test bc1nez
+ "bc1nez $f4, 58f \n\t"
+ "nop \n\t"
+ "bc1nez $f2, Lend8 \n\t"
+ "nop \n\t"
+ "b 58f \n\t"
+ "nop \n\t"
+"Lend8: \n\t"
+ "li $11, 0 \n\t"
+ "58: \n\t"
+ "move %[err], $11 \n\t"
+ ".set pop \n\t"
+ : [err] "+r"(err) // outputs
+ : // inputs
+ : "$2", "$3", "$4", "$5", "$6", "$7", "$8", "$9", "$10", "$11", "$31", "$s0", "$f2", "$f4", "$f6" // clobbers
+ );
+
+ return err;
+}
+
+
+
+
+// R6 specific tests for mips64 (64-bit)
+int test_r6_llsc_dp()
+{
+ volatile int err = 0;
+
+ asm(
+ ".set push \n\t"
+ ".set noreorder \n\t"
+ ".data \n\t"
+ ".align 16 \n\t"
+ "test_data: \n\t"
+ ".word 0xaaaaaaaa \n\t"
+ ".word 0xbbbbbbbb \n\t"
+ ".word 0xcccccccc \n\t"
+ ".word 0xdddddddd \n\t"
+ ".align 16 \n\t"
+ "end_check: \n\t"
+ ".byte 0 \n\t"
+ ".byte 0 \n\t"
+ ".byte 0 \n\t"
+ ".byte 0x1 \n\t"
+ ".text \n\t"
+ "li $11, 1 \n\t" // Test LLWP
+ "llwp $2, $3, test_data \n\t"
+ checkpair_dword($2, $3, test_data, end_check)
+ "sll $2, $2, 1 \n\t"
+ "srl $3, $3, 1 \n\t"
+ "move $s0, $2 \n\t"
+ "scwp $2, $3, test_data \n\t"
+ check32($2, 1)
+ checkpair_dword($s0, $3, test_data, end_check)
+ "li $11, 2 \n\t" // Test SCWP, done
+ "li $11, 3 \n\t" // Test LLDP
+ "lldp $2, $3, test_data \n\t"
+ checkpair_qword($2, $3, test_data, end_check)
+ "dsll $2, $2, 1 \n\t"
+ "dsrl $3, $3, 1 \n\t"
+ "move $s0, $2 \n\t"
+ "scdp $2, $3, test_data \n\t"
+ check32($2, 1)
+ checkpair_qword($s0, $3, test_data, end_check)
+ "li $11, 4 \n\t" // Test SCDP, done
+ "Lend5: \n\t"
+ "li $11, 0 \n\t"
+ "58: \n\t"
+ "move %[err], $11 \n\t"
+ ".set pop \n\t"
+ : [err] "+r"(err) // outputs
+ : // inputs
+ : "$2", "$3", "$4", "$5", "$6", "$7", "$8", "$9", "$10", "$11", "$31", "$s0" // clobbers
+ );
+
+ return err;
+}
+
+
+/* R6 specific tests for mips32 (32-bit) */
+int test_r6_llsc_wp()
+{
+ volatile int err = 0;
+
+ asm(
+ ".set push \n\t"
+ ".set noreorder \n\t"
+ ".data \n\t"
+ ".align 8 \n\t" // p2align
+ "test_data_2: \n\t"
+ ".word 0xaaaaaaaa \n\t"
+ ".word 0xbbbbbbbb \n\t"
+ ".align 8 \n\t"
+ "end_check_2: \n\t"
+ ".byte 0 \n\t"
+ ".byte 0 \n\t"
+ ".byte 0 \n\t"
+ ".byte 0x1 \n\t"
+ ".text \n\t"
+ "li $11, 1 \n\t" // Test LLWP
+ "llwp $2, $3, test_data_2 \n\t"
+ checkpair_dword($2, $3, test_data_2, end_check_2)
+ "sll $2, $2, 1 \n\t"
+ "srl $3, $3, 1 \n\t"
+ "move $s0, $2 \n\t"
+ "scwp $2, $3, test_data_2 \n\t"
+ check32($2, 1)
+ checkpair_dword($s0, $3, test_data_2, end_check_2)
+ "li $11, 2 \n\t" // Test SCWP, done
+ "Lend6: \n\t"
+ "li $11, 0 \n\t"
+ "58: \n\t"
+ "move %[err], $11 \n\t"
+ ".set pop \n\t"
+ : [err] "+r"(err) // outputs
+ : // inputs
+ : "$2", "$3", "$4", "$5", "$6", "$7", "$8", "$9", "$10", "$11", "$31", "$s0" // clobbers
+ );
+
+ return err;
+}
+
+
+
+/*
+ * Any test_r6_* function returns non-zero => failure
+ */
+#define EXPECT(X) if ((X)) abort ();
+
+
+main ()
+{
+ EXPECT(test_r6_branch());
+
+ EXPECT(test_r6_forbidden());
+
+ EXPECT(test_r6_64());
+
+ EXPECT(test_r6());
+
+ EXPECT(test_r6_fpu());
+
+
+ EXPECT(test_r6_llsc_dp());
+
+
+ EXPECT(test_r6_llsc_wp());
+}
diff --git a/gdb/testsuite/gdb.arch/mips-64-r6.exp b/gdb/testsuite/gdb.arch/mips-64-r6.exp
new file mode 100644
index 00000000000..1ab04daddd5
--- /dev/null
+++ b/gdb/testsuite/gdb.arch/mips-64-r6.exp
@@ -0,0 +1,99 @@
+# Copyright (C) 2012-2023 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+
+# Test mips release 6 patch.
+
+require {istarget "*mips*"}
+
+proc single_step {} {
+ global gdb_prompt
+
+ send_gdb "si\n"
+ gdb_expect {
+ -re "$gdb_prompt \$" {
+ return 1
+ }
+ -re ".*Breakpoint.*test_.*" {
+ return 2
+ }
+ -re ".*exited normally.*" {
+ return 3
+ }
+ -re ".*The program is not being run.*" {
+ return 4
+ }
+ }
+ return 0
+}
+
+set testfile "mips-64-r6"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+verbose -log "\[DEBUG\] testfile=${testfile}\n"
+verbose -log "\[DEBUG\] srcfile=${srcfile}\n"
+verbose -log "\[DEBUG\] binfile=${binfile}\n"
+verbose -log "\[DEBUG\] srcdir/subdir/srcfile=${srcdir}/${subdir}/${srcfile}\n\n"
+
+if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug nowarnings}] != "" } {
+ fail "compilation"
+ return
+}
+
+pass "compilation"
+
+clean_restart $binfile
+# Native needs run.
+runto_main
+
+set tests ""
+foreach n [list "r6_branch" "r6_forbidden" "r6_64" "r6" "r6_fpu" "r6_llsc_dp" "r6_llsc_wp"] {
+ lappend tests "test_$n"
+}
+
+# put breakpoint on each test-function
+foreach func $tests {
+ gdb_test "break $func" "Breakpoint.*at.*" "set breakpoint on $func"
+}
+
+
+set rt [single_step]
+if { $rt == 0 } {
+ fail "single_step returned $rt"
+}
+
+set start [timestamp]
+global timeout
+while { $rt != 0 && [timestamp] - $start < 3*$timeout } {
+
+ if { $rt == 3 } {
+ pass "all tests are fine"
+ return
+ } elseif { $rt == 4 } {
+ fail "Program exited abnormally"
+ return
+ }
+# elseif { $rt == 1 || $rt == 2 } { # 1->got gdb_prompt ; 2->hit breakpoint
+# verbose -log "\[DEBUG_\] 'single_step' returned rt=$rt ; timeout = $timeout"
+# }
+
+ set rt [single_step]
+}
+
+if {$rt == 0 } {
+ fail "stepi"
+}
+
+
--
2.34.1
next reply other threads:[~2024-01-30 15:17 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-30 15:17 Milos Kalicanin [this message]
2024-01-30 15:43 ` Milos Kalicanin
2024-02-02 20:57 ` Simon Marchi
2024-02-08 14:23 ` Milos Kalicanin
2024-02-12 17:38 ` Simon Marchi
2024-02-14 14:49 ` Milos Kalicanin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AS8PR03MB969878E63A85A786E3461C52967D2@AS8PR03MB9698.eurprd03.prod.outlook.com \
--to=milos.kalicanin@syrmia.com \
--cc=Djordje.Todorovic@syrmia.com \
--cc=Dragan.Mladjenovic@syrmia.com \
--cc=aburgess@redhat.com \
--cc=cfu@wavecomp.com \
--cc=gdb-patches@sourceware.org \
--cc=macro@orcam.me.uk \
--cc=simon.marchi@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).