* [PATCH] misc: Add support Linux uio.h RWF_NOAPPEND flag
@ 2024-04-03 6:04 Stafford Horne
2024-04-03 6:17 ` Stafford Horne
0 siblings, 1 reply; 2+ messages in thread
From: Stafford Horne @ 2024-04-03 6:04 UTC (permalink / raw)
To: GLIBC patches; +Cc: Adhemerval Zanella, Stafford Horne
In Linux 6.9 a new flag is added to allow for Per-io operations to
disable append mode even if a file was opened with the flag O_APPEND.
This is done with the new RWF_NOAPPEND flag.
This caused two test failures as these tests expected the flag 0x00000020
to be unused. Adding the flag definition now fixes these tests on Linux
6.9 (v6.9-rc1).
FAIL: misc/tst-preadvwritev2
FAIL: misc/tst-preadvwritev64v2
This patch adds the flag, adjusts the test and adds details to
documentation.
Link: https://lore.kernel.org/all/20200831153207.GO3265@brightrain.aerifal.cx/
---
Cc: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
As he mentioned he would be looking into it when this was mentioned in the
LoongArch TLS patch.
https://sourceware.org/pipermail/libc-alpha/2024-March/155323.html
This also was encountered during OpenRISC testing, and I found a fix. This has
been found before Linux 6.9 is actually released. I guess we should not merge
it to glibc until 6.9 is official. What is the policy on this?
manual/llio.texi | 5 +++++
misc/tst-preadvwritev2-common.c | 5 ++++-
sysdeps/unix/sysv/linux/bits/uio-ext.h | 1 +
3 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/manual/llio.texi b/manual/llio.texi
index 0b61d491f5..e858e038ae 100644
--- a/manual/llio.texi
+++ b/manual/llio.texi
@@ -1341,6 +1341,11 @@ will fail and set @code{errno} to @code{EAGAIN} if the operation would block.
Per-IO synchronization as if the file was opened with @code{O_APPEND} flag.
@end vtable
+@item RWF_NOAPPEND
+This flag allows an offset to be honored, even if the file was opened with
+@code{O_APPEND} flag.
+@end vtable
+
When the source file is compiled with @code{_FILE_OFFSET_BITS == 64} the
@code{preadv2} function is in fact @code{preadv64v2} and the type
@code{off_t} has 64 bits, which makes it possible to handle files up to
diff --git a/misc/tst-preadvwritev2-common.c b/misc/tst-preadvwritev2-common.c
index b5f19f002c..8e04ff7282 100644
--- a/misc/tst-preadvwritev2-common.c
+++ b/misc/tst-preadvwritev2-common.c
@@ -34,8 +34,11 @@
#ifndef RWF_APPEND
# define RWF_APPEND 0
#endif
+#ifndef RWF_NOAPPEND
+# define RWF_NOAPPEND 0
+#endif
#define RWF_SUPPORTED (RWF_HIPRI | RWF_DSYNC | RWF_SYNC | RWF_NOWAIT \
- | RWF_APPEND)
+ | RWF_APPEND | RWF_NOAPPEND)
/* Generic uio_lim.h does not define IOV_MAX. */
#ifndef IOV_MAX
diff --git a/sysdeps/unix/sysv/linux/bits/uio-ext.h b/sysdeps/unix/sysv/linux/bits/uio-ext.h
index 7854cccef3..ead7a09156 100644
--- a/sysdeps/unix/sysv/linux/bits/uio-ext.h
+++ b/sysdeps/unix/sysv/linux/bits/uio-ext.h
@@ -47,6 +47,7 @@ extern ssize_t process_vm_writev (pid_t __pid, const struct iovec *__lvec,
#define RWF_SYNC 0x00000004 /* per-IO O_SYNC. */
#define RWF_NOWAIT 0x00000008 /* per-IO nonblocking mode. */
#define RWF_APPEND 0x00000010 /* per-IO O_APPEND. */
+#define RWF_NOAPPEND 0x00000020 /* per-IO negation of O_APPEND */
__END_DECLS
--
2.44.0
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] misc: Add support Linux uio.h RWF_NOAPPEND flag
2024-04-03 6:04 [PATCH] misc: Add support Linux uio.h RWF_NOAPPEND flag Stafford Horne
@ 2024-04-03 6:17 ` Stafford Horne
0 siblings, 0 replies; 2+ messages in thread
From: Stafford Horne @ 2024-04-03 6:17 UTC (permalink / raw)
To: GLIBC patches; +Cc: Adhemerval Zanella
Note,
The subject should at least be "Add support *for* linux uio.h RWF_NOAPPEND flag"
-Stafford
On Wed, Apr 03, 2024 at 07:04:37AM +0100, Stafford Horne wrote:
> In Linux 6.9 a new flag is added to allow for Per-io operations to
> disable append mode even if a file was opened with the flag O_APPEND.
> This is done with the new RWF_NOAPPEND flag.
>
> This caused two test failures as these tests expected the flag 0x00000020
> to be unused. Adding the flag definition now fixes these tests on Linux
> 6.9 (v6.9-rc1).
>
> FAIL: misc/tst-preadvwritev2
> FAIL: misc/tst-preadvwritev64v2
>
> This patch adds the flag, adjusts the test and adds details to
> documentation.
>
> Link: https://lore.kernel.org/all/20200831153207.GO3265@brightrain.aerifal.cx/
> ---
> Cc: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
>
> As he mentioned he would be looking into it when this was mentioned in the
> LoongArch TLS patch.
>
> https://sourceware.org/pipermail/libc-alpha/2024-March/155323.html
>
> This also was encountered during OpenRISC testing, and I found a fix. This has
> been found before Linux 6.9 is actually released. I guess we should not merge
> it to glibc until 6.9 is official. What is the policy on this?
>
> manual/llio.texi | 5 +++++
> misc/tst-preadvwritev2-common.c | 5 ++++-
> sysdeps/unix/sysv/linux/bits/uio-ext.h | 1 +
> 3 files changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/manual/llio.texi b/manual/llio.texi
> index 0b61d491f5..e858e038ae 100644
> --- a/manual/llio.texi
> +++ b/manual/llio.texi
> @@ -1341,6 +1341,11 @@ will fail and set @code{errno} to @code{EAGAIN} if the operation would block.
> Per-IO synchronization as if the file was opened with @code{O_APPEND} flag.
> @end vtable
>
> +@item RWF_NOAPPEND
> +This flag allows an offset to be honored, even if the file was opened with
> +@code{O_APPEND} flag.
> +@end vtable
> +
> When the source file is compiled with @code{_FILE_OFFSET_BITS == 64} the
> @code{preadv2} function is in fact @code{preadv64v2} and the type
> @code{off_t} has 64 bits, which makes it possible to handle files up to
> diff --git a/misc/tst-preadvwritev2-common.c b/misc/tst-preadvwritev2-common.c
> index b5f19f002c..8e04ff7282 100644
> --- a/misc/tst-preadvwritev2-common.c
> +++ b/misc/tst-preadvwritev2-common.c
> @@ -34,8 +34,11 @@
> #ifndef RWF_APPEND
> # define RWF_APPEND 0
> #endif
> +#ifndef RWF_NOAPPEND
> +# define RWF_NOAPPEND 0
> +#endif
> #define RWF_SUPPORTED (RWF_HIPRI | RWF_DSYNC | RWF_SYNC | RWF_NOWAIT \
> - | RWF_APPEND)
> + | RWF_APPEND | RWF_NOAPPEND)
>
> /* Generic uio_lim.h does not define IOV_MAX. */
> #ifndef IOV_MAX
> diff --git a/sysdeps/unix/sysv/linux/bits/uio-ext.h b/sysdeps/unix/sysv/linux/bits/uio-ext.h
> index 7854cccef3..ead7a09156 100644
> --- a/sysdeps/unix/sysv/linux/bits/uio-ext.h
> +++ b/sysdeps/unix/sysv/linux/bits/uio-ext.h
> @@ -47,6 +47,7 @@ extern ssize_t process_vm_writev (pid_t __pid, const struct iovec *__lvec,
> #define RWF_SYNC 0x00000004 /* per-IO O_SYNC. */
> #define RWF_NOWAIT 0x00000008 /* per-IO nonblocking mode. */
> #define RWF_APPEND 0x00000010 /* per-IO O_APPEND. */
> +#define RWF_NOAPPEND 0x00000020 /* per-IO negation of O_APPEND */
>
> __END_DECLS
>
> --
> 2.44.0
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2024-04-03 6:17 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-04-03 6:04 [PATCH] misc: Add support Linux uio.h RWF_NOAPPEND flag Stafford Horne
2024-04-03 6:17 ` Stafford Horne
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).