[PATCH] C-SKY: Strip hard float abi from hard float featrue.

[PATCH] C-SKY: Strip hard float abi from hard float featrue.

[Xianmiao Qu]

The hard float abi and hard float are different,
  Hard float abi: Use float register to pass float type arguments.
  Hard float: Enable the hard float ISA feature.
So the with_fp_cond cannot represent these two features. When
-mfloat-abi=softfp, the float abi is soft and hard float is enabled.
So add 'with_hard_float_abi' in preconfigure and define 'CSKY_HARD_FLOAT_ABI'
if float abi is hard, and use 'CSKY_HARD_FLOAT_ABI' to determine
dynamic linker because it is what determines compatibility.
And with_fp_cond is still needed to tell glibc whether to enable
hard floating feature.
In addition, use AC_TRY_COMMAND to test gcc to ensure compatibility
between different versions of gcc. The original way has a problem
that __CSKY_HARD_FLOAT_FPU_SF__ means the target only has single
hard float-points ISA, so it's not defined in CPUs like ck810f.
---
 config.h.in                                 |  5 ++-
 sysdeps/csky/preconfigure                   | 47 ++++++++++++---------
 sysdeps/csky/preconfigure.ac                | 39 +++++++++--------
 sysdeps/unix/sysv/linux/csky/shlib-versions |  4 +-
 4 files changed, 52 insertions(+), 43 deletions(-)
 mode change 100644 => 100755 sysdeps/csky/preconfigure

diff --git a/config.h.in b/config.h.in
index 43d32518ab..09730d9d52 100644
--- a/config.h.in
+++ b/config.h.in
@@ -123,9 +123,12 @@
 /* C-SKY ABI version.  */
 #undef CSKYABI
 
-/* C-SKY floating-point ABI.  */
+/* C-SKY floating-point instructions.  */
 #undef CSKY_HARD_FLOAT
 
+/* C-SKY floating-point ABI.  */
+#undef CSKY_HARD_FLOAT_ABI
+
 /* RISC-V integer ABI for ld.so.  */
 #undef RISCV_ABI_XLEN
 
diff --git a/sysdeps/csky/preconfigure b/sysdeps/csky/preconfigure
old mode 100644
new mode 100755
index 8a6136dd8d..6ba4871d18
--- a/sysdeps/csky/preconfigure
+++ b/sysdeps/csky/preconfigure
@@ -5,10 +5,8 @@ case "$machine" in
 csky*)
     abi=`$CC $CFLAGS $CPPFLAGS -E -dM -xc /dev/null |
       sed -n 's/^#define __CSKYABI__ \(.*\)/\1/p'`
-    hard_float=`$CC $CFLAGS $CPPFLAGS -E -dM -xc /dev/null |
-      sed -n 's/^#define __CSKY_HARD_FLOAT__ \(.*\)/\1/p'`
-    hard_float_sf=`$CC $CFLAGS $CPPFLAGS -E -dM -xc /dev/null |
-      sed -n 's/^#define __CSKY_HARD_FLOAT_FPU_SF__ \(.*\)/\1/p'`
+    soft_float=`$CC $CFLAGS $CPPFLAGS -E -dM -xc /dev/null |
+      sed -n 's/^#define __CSKY_SOFT_FLOAT__ \(.*\)/\1/p'`
     hard_float_abi=`$CC $CFLAGS $CPPFLAGS -E -dM -xc /dev/null |
       sed -n 's/^#define __CSKY_HARD_FLOAT_ABI__ \(.*\)/\1/p'`
 
@@ -24,26 +22,31 @@ csky*)
 	;;
     esac
 
-    # __CSKY_HARD_FLOAT_ABI__ was added on gcc 11 to specify whether
-    # -mfloat-abi=hard is set.  On older gcc, the float ABI is defined solely
-    # with __CSKY_HARD_FLOAT__.  If __CSKY_HARD_FLOAT__ is set, it can be
-    # either a hard-float ABI (gcc older than 11, or gcc11 -mfloat-abi=hard
-    # (__CSKY_HARD_FLOAT_ABI__ is set) or -mfloat-abi=softfp
-    # (__CSKY_HARD_FLOAT_ABI__ is not set). To be compatible with older gcc,
-    # use __CSKY_HARD_FLOAT_FPU_SF__ identify if -mfloat-abi is supported,
-    # because it is added to gcc at the same time as -mfloat-abi.
-    if test -n "$hard_float"; then
-	if test -z "$hard_float_sf"; then
-	    with_fp_cond=1
-	else
+    if { ac_try='${CC-cc} -S -mfloat-abi=softfp /dev/null 1>&5'
+  { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
+  (eval $ac_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+      soft_float_abi_support=1
+    else
+      soft_float_abi_support=0
+    fi
+
+    if test -n "$soft_float"; then
+	with_fp_cond=0
+	with_hard_float_abi=0
+    else
+	with_fp_cond=1
+	if test -n "$soft_float_abi_support"; then
 	    if test -n "$hard_float_abi"; then
-		with_fp_cond=1
+		with_hard_float_abi=1
 	    else
-		with_fp_cond=0
+		with_hard_float_abi=0
 	    fi
+	else
+	    with_hard_float_abi=1
 	fi
-    else
-	with_fp_cond=0
     fi
 
     base_machine=csky
@@ -55,6 +58,10 @@ _ACEOF
 
     cat >>confdefs.h <<_ACEOF
 #define CSKY_HARD_FLOAT $with_fp_cond
+_ACEOF
+
+    cat >>confdefs.h <<_ACEOF
+#define CSKY_HARD_FLOAT_ABI $with_hard_float_abi
 _ACEOF
 
     ;;
diff --git a/sysdeps/csky/preconfigure.ac b/sysdeps/csky/preconfigure.ac
index 332c0f1cab..7412bcef92 100644
--- a/sysdeps/csky/preconfigure.ac
+++ b/sysdeps/csky/preconfigure.ac
@@ -5,10 +5,8 @@ case "$machine" in
 csky*)
     abi=`$CC $CFLAGS $CPPFLAGS -E -dM -xc /dev/null |
       sed -n 's/^#define __CSKYABI__ \(.*\)/\1/p'`
-    hard_float=`$CC $CFLAGS $CPPFLAGS -E -dM -xc /dev/null |
-      sed -n 's/^#define __CSKY_HARD_FLOAT__ \(.*\)/\1/p'`
-    hard_float_sf=`$CC $CFLAGS $CPPFLAGS -E -dM -xc /dev/null |
-      sed -n 's/^#define __CSKY_HARD_FLOAT_FPU_SF__ \(.*\)/\1/p'`
+    soft_float=`$CC $CFLAGS $CPPFLAGS -E -dM -xc /dev/null |
+      sed -n 's/^#define __CSKY_SOFT_FLOAT__ \(.*\)/\1/p'`
     hard_float_abi=`$CC $CFLAGS $CPPFLAGS -E -dM -xc /dev/null |
       sed -n 's/^#define __CSKY_HARD_FLOAT_ABI__ \(.*\)/\1/p'`
 
@@ -24,26 +22,26 @@ csky*)
 	;;
     esac
 
-    # __CSKY_HARD_FLOAT_ABI__ was added on gcc 11 to specify whether
-    # -mfloat-abi=hard is set.  On older gcc, the float ABI is defined solely
-    # with __CSKY_HARD_FLOAT__.  If __CSKY_HARD_FLOAT__ is set, it can be
-    # either a hard-float ABI (gcc older than 11, or gcc11 -mfloat-abi=hard
-    # (__CSKY_HARD_FLOAT_ABI__ is set) or -mfloat-abi=softfp
-    # (__CSKY_HARD_FLOAT_ABI__ is not set). To be compatible with older gcc,
-    # use __CSKY_HARD_FLOAT_FPU_SF__ identify if -mfloat-abi is supported,
-    # because it is added to gcc at the same time as -mfloat-abi.
-    if test -n "$hard_float"; then
-	if test -z "$hard_float_sf"; then
-	    with_fp_cond=1
-	else
+    if AC_TRY_COMMAND(${CC-cc} -S -mfloat-abi=softfp /dev/null 1>&AS_MESSAGE_LOG_FD); then
+      soft_float_abi_support=1
+    else
+      soft_float_abi_support=0
+    fi
+
+    if test -n "$soft_float"; then
+	with_fp_cond=0
+	with_hard_float_abi=0
+    else
+	with_fp_cond=1
+	if test -n "$soft_float_abi_support"; then
 	    if test -n "$hard_float_abi"; then
-		with_fp_cond=1
+		with_hard_float_abi=1
 	    else
-		with_fp_cond=0
+		with_hard_float_abi=0
 	    fi
+	else
+	    with_hard_float_abi=1
 	fi
-    else
-	with_fp_cond=0
     fi
 
     base_machine=csky
@@ -51,5 +49,6 @@ csky*)
 
     AC_DEFINE_UNQUOTED([CSKYABI], [$abi])
     AC_DEFINE_UNQUOTED([CSKY_HARD_FLOAT], [$with_fp_cond])
+    AC_DEFINE_UNQUOTED([CSKY_HARD_FLOAT_ABI], [$with_hard_float_abi])
     ;;
 esac
diff --git a/sysdeps/unix/sysv/linux/csky/shlib-versions b/sysdeps/unix/sysv/linux/csky/shlib-versions
index 8c026356ef..4ab7d6b83e 100644
--- a/sysdeps/unix/sysv/linux/csky/shlib-versions
+++ b/sysdeps/unix/sysv/linux/csky/shlib-versions
@@ -1,8 +1,8 @@
 DEFAULT			GLIBC_2.29
 
-%if CSKYABI == 2 && CSKY_HARD_FLOAT == 1
+%if CSKYABI == 2 && CSKY_HARD_FLOAT_ABI == 1
 ld=ld-linux-cskyv2-hf.so.1
-%elif CSKYABI == 2 && CSKY_HARD_FLOAT == 0
+%elif CSKYABI == 2 && CSKY_HARD_FLOAT_ABI == 0
 ld=ld-linux-cskyv2.so.1
 %else
 %error cannot determine ABI
-- 
2.17.1